Experimental Study on Friction between Saline Ice and Steel

Understanding the interaction of sea ice with offshore structures is of primary importance for the development of technology in cold climate regions. The rheological properties of sea ice (strength, creep, viscosity) as well as the roughness of the contact surface are the main factors influencing the type of interaction with a structure. A device was developed and designed and small scale laboratory experiments were carried out to study sea ice frictional interaction with steel material by means of a uniaxial compression rig. Sea-ice was artificially grown between a stainless steel piston (of circular cross section) and a hollow cylinder of the same material, coaxial to the former and of the same surface roughness. Three different values for the roughness were tested: 1.2, 10 and 30 μm Ry (maximum asperities height), chosen as representative values for typical surface conditions, from smooth to normally corroded steel. Creep tests (0.2, 0.3, 0.4 and 0.6 kN) were conducted at T = -10 ºC. By pushing the piston head towards the cylinder base, three different types of relative movement were observed: 1) the piston slid through the ice, 2) the piston slid through the ice and the ice slid on the surface of the outer cylinder, 3) the ice slid only on the cylinder surface. A cyclic stick-slip motion of the piston was detected with a representative frequency of 0.1 Hz. The ratio of the mean rate of axial displacement to the frequency of the stick-slip oscillations was found to be comparable to the roughness length (Sm). The roughness is the most influential parameter affecting the amplitude of the oscillations, while the load has a relevant influence on the their frequency. Guidelines for further investigations were recommended. Marco Nanetti - seloselo@virgilio.it

Una scossa all'economia: le conseguenze del sisma dell'Aquilano. Traduzione dall'inglese in italiano di un articolo di ricerca economica ed esperienza di collaborazione con gli autori.

The aim of this dissertation is to provide a translation from English into Italian of a specialised scientific article published in the Cambridge Working Papers in Economics series. In this text, the authors estimate the economic consequences of the earthquake that hit the Abruzzo region in 2009. An extract of this translation will be published as part of conference proceedings. The main reason behind this choice is a personal interest in specialised translation in the economic domain. Moreover, the subject of the article is of particular interest to the Italian readership. The aim of this study is to show how a non-specialised translator can tackle with such a highly specialised translation with the use of appropriate terminology resources and the collaboration of field experts. The translation could be of help to other Italian linguists looking for translated material in this particular domain where English seems to be the dominant language. In order to ensure consistent terminology and adequate style, the document has been translated with the use of different resources, such as dictionaries, glossaries and specialised corpora. I also contacted field experts and the authors of text. The collaboration with the authors proved to be an invaluable resource yet one to be carefully managed. This work is divided into 5 chapters. The first deals with domain-specific sublanguages. The second gives an overview of corpus linguistics and describes the corpora designed for the translation. The third provides an analysis of the article, focusing on syntactical, lexical and structural features while the fourth presents the translation, side-by-side with the source text. The fifth comments on the main difficulties encountered in the translation and the strategies used, as well as the relationship with the authors and their review of the published text. Appendix I contains the econometric glossary English – Italian.