2 resultados para Gyro compass
em AMS Tesi di Laurea - Alm@DL - Università di Bologna
Resumo:
Motivation Thanks for a scholarship offered by ALma Mater Studiorum I could stay in Denmark for six months during which I could do physical tests on the device Gyro PTO at the Departmet of Civil Engineering of Aalborg University. Aim The goal of my thesis is an hydraulic evaluation of the device: Gyro PTO, a gyroscopic device for conversion of mechanical energy in ocean surface waves to electrical energy. The principle of the system is the application of the gyroscopic moment of flywheels equipped on a swing float excited by waves. The laboratory activities were carried out by: Morten Kramer, Jan Olsen, Irene Guaraldi, Morten Thøtt, Nikolaj Holk. The main purpose of the tests was to investigate the power absorption performance in irregular waves, but testing also included performance measures in regular waves and simple tests to get knowledge about characteristics of the device, which could facilitate the possibility of performing numerical simulations and optimizations. Methodology To generate the waves and measure the performance of the device a workstation was created in the laboratory. The workstation consist of four computers in each of wich there was a different program. Programs have been used : Awasys6, LabView, Wave lab, Motive optitrack, Matlab, Autocad Main Results Thanks to the obtained data with the tank testing was possible to make the process of wave analisys. We obtained significant wave height and period through a script Matlab and then the values of power produced, and energy efficiency of the device for two types of waves: regular and irregular. We also got results as: physical size, weight, inertia moments, hydrostatics, eigen periods, mooring stiffness, friction, hydrodynamic coefficients etc. We obtained significant parameters related to the prototype in the laboratory after which we scale up the results obtained for two future applications: one in Nissun Brending and in the North Sea. Conclusions The main conclusion on the testing is that more focus should be put into ensuring a stable and positive power output in a variety of wave conditions. In the irregular waves the power production was negative and therefore it does not make sense to scale up the results directly. The average measured capture width in the regular waves was 0.21 m. As the device width is 0.63 m this corresponds to a capture width ratio of: 0.21/0.63 * 100 = 33 %. Let’s assume that it is possible to get the device to produce as well in irregular waves under any wave conditions, and lets further assume that the yearly absorbed energy can be converted into electricity at a PTO-efficiency of 90 %. Under all those assumptions the results in table are found, i.e. a Nissum Bredning would produce 0.87 MWh/year and a North Sea device 85 MWh/year.
Resumo:
Tra le numerose tecnologie che impiegano l'energia solare per la produzione di elettricità una tra le più promettenti è quella degli impianti a Central Receiving System (CRS). Tale sistema consiste in un campo di specchi altamente riflettenti, detti eliostati, che concentrano la radiazione solare su una superficie assorbente posizionata in cima a una torre. La quantità di radiazione concentrabile da un sistema CRS, e quindi l'energia effettivamente prodotta, dipende in maniera cruciale dalla precisione del puntamento degli eliostati. I sistemi attualmente disponibili sono in grado di ottenere un'alta effcienza ma necessitano di componenti meccanici ad alto costo, che siano in grado di ottenere precisioni di puntamento molto elevate. Le molte sorgenti di errore presenti nel sistema possono però portare a un decremento significativo di tale efficienza. Alcuni di questi errori (tolleranze meccaniche dell'installazione, agenti atmosferici) possono essere compensati mediante opportuni sistemi di controllo ad anello chiuso. Il risultato è di aumentare il potere di concentrazione dell'impianto, riducendo al contempo i costi, vista la possibilità di utilizzo di componenti meccanici meno precisi. Questa tesi si propone di sviluppare un sistema di controllo a basso costo in retroazione per orientare nello spazio tridimensionale un eliostato. Tale sistema deve essere in grado di soddisfare le specifiche sulla precisione di puntamento fornite dalla modellistica degli impianti CRS. Sono illustrati i metodi per ottenere le quantità necessarie a determinare l'orientazione da misure statiche di accelerazione e campo magnetico.Sono stati esaminati i modelli teorici di accelerometri e magnetometri e le procedure, presenti nella letteratura, per una loro corretta calibrazione. Si sono quindi confrontate le prestazioni delle differenti calibrazioni in una misura con un sensore reale. Si è valutato l'impatto di vari tipi di filtraggio digitale nel diminuire l'incertezza di determinazione degli angoli caratteristici fino ai valori forniti dalle specifiche.