Direct C–H silylation and borylation of biomass derivatives by iridium heterogeneous catalysts

Furfural and its derivatives represent renewable and readily available platforms for a wide range of chemicals. Much attention has been devoted to their functionalization over the last years. TM-catalysed C–H activation has emerged as a powerful tool for synthesizing new C–C and C–X bonds. Moreover, it provides a sustainable way to obtain molecules by reducing waste and saving steps. At the same time, iridium catalysts have proven to be very active in some C–H functionalizations of several (hetero)arenes. Although very promising, this technique is still poorly applied on an industrial scale due to the severe conditions required. Continuous flow chemistry using heterogeneous catalysts appears to be a valuable way to overcome these problems. In this work, we present different solutions for the immobilization of homogeneous iridium complexes on silica gels, using bidentate amines and phosphines as anchoring ligands. We successfully employed the catalysts in C–H silylation and borylation of furfural, using C2 located directing group. In this way, we finally obtained a suitable catalyst that could be potentially applied in continuous-flow chemistry.

A new insight in stress recovery tecniques and hessian reconstruction methods

Stress recovery techniques have been an active research topic in the last few years since, in 1987, Zienkiewicz and Zhu proposed a procedure called Superconvergent Patch Recovery (SPR). This procedure is a last-squares fit of stresses at super-convergent points over patches of elements and it leads to enhanced stress fields that can be used for evaluating finite element discretization errors. In subsequent years, numerous improved forms of this procedure have been proposed attempting to add equilibrium constraints to improve its performances. Later, another superconvergent technique, called Recovery by Equilibrium in Patches (REP), has been proposed. In this case the idea is to impose equilibrium in a weak form over patches and solve the resultant equations by a last-square scheme. In recent years another procedure, based on minimization of complementary energy, called Recovery by Compatibility in Patches (RCP) has been proposed in. This procedure, in many ways, can be seen as the dual form of REP as it substantially imposes compatibility in a weak form among a set of self-equilibrated stress fields. In this thesis a new insight in RCP is presented and the procedure is improved aiming at obtaining convergent second order derivatives of the stress resultants. In order to achieve this result, two different strategies and their combination have been tested. The first one is to consider larger patches in the spirit of what proposed in [4] and the second one is to perform a second recovery on the recovered stresses. Some numerical tests in plane stress conditions are presented, showing the effectiveness of these procedures. Afterwards, a new recovery technique called Last Square Displacements (LSD) is introduced. This new procedure is based on last square interpolation of nodal displacements resulting from the finite element solution. In fact, it has been observed that the major part of the error affecting stress resultants is introduced when shape functions are derived in order to obtain strains components from displacements. This procedure shows to be ultraconvergent and is extremely cost effective, as it needs in input only nodal displacements directly coming from finite element solution, avoiding any other post-processing in order to obtain stress resultants using the traditional method. Numerical tests in plane stress conditions are than presented showing that the procedure is ultraconvergent and leads to convergent first and second order derivatives of stress resultants. In the end, transverse stress profiles reconstruction using First-order Shear Deformation Theory for laminated plates and three dimensional equilibrium equations is presented. It can be seen that accuracy of this reconstruction depends on accuracy of first and second derivatives of stress resultants, which is not guaranteed by most of available low order plate finite elements. RCP and LSD procedures are than used to compute convergent first and second order derivatives of stress resultants ensuring convergence of reconstructed transverse shear and normal stress profiles respectively. Numerical tests are presented and discussed showing the effectiveness of both procedures.

Atmospheric corrosion of quaternary bronzes (Cu-Sn-Zn-Pb): laboratory tests (accelerated ageing in wet & dry conditions)and field studies (the Bottego monument in Parma, Italy).

The interactions between outdoor bronzes and the environment, which lead to bronze corrosion, require a better understanding in order to design effective conservation strategies in the Cultural Heritage field. In the present work, investigations on real patinas of the outdoor monument to Vittorio Bottego (Parma, Italy) and laboratory studies on accelerated corrosion testing of inhibited (by silane-based films, with and without ceria nanoparticles) and non-inhibited quaternary bronzes are reported and discussed. In particular, a wet&dry ageing method was used both for testing the efficiency of the inhibitor and for patinating bronze coupons before applying the inhibitor. A wide range of spectroscopic techniques has been used, for characterizing the core metal (SEM+EDS, XRF, AAS), the corroded surfaces (SEM+EDS, portable XRF, micro-Raman, ATR-IR, Py-GC-MS) and the ageing solutions (AAS). The main conclusions were: 1. The investigations on the Bottego monument confirmed the differentiation of the corrosion products as a function of the exposure geometry, already observed in previous works, further highlighting the need to take into account the different surface features when selecting conservation procedures such as the application of inhibitors (i.e. the relative Sn enrichment in unsheltered areas requires inhibitors which effectively interact not only with Cu but also with Sn). 2. The ageing (pre-patination) cycle on coupons was able to reproduce the relative Sn enrichment that actually happens in real patinated surfaces, making the bronze specimens representative of the real support for bronze inhibitors. 3. The non-toxic silane-based inhibitors display a good protective efficiency towards pre-patinated surfaces, differently from other widely used inhibitors such as benzotriazole (BTA) and its derivatives. 4. The 3-mercapto-propyl-trimethoxy-silane (PropS-SH) additivated with CeO2 nanoparticles generally offered a better corrosion protection than PropS-SH.

Outdoor bronze conservation: assessment of protective treatments by accelerated aging and of treatment removal procedures by laser cleaning

Outdoor bronzes exposed to the environment form naturally a layer called patina, which may be able to protect the metallic substrate. However, since the last century, with the appearance of acid rains, a strong change in the nature and properties of the copper based patinas occurred [1]. Studies and general observations have established that bronze corrosion patinas created by acid rain are not only disfiguring in terms of loss of detail and homogeneity, but are also unstable [2]. The unstable patina is partially leached away by rainwater. This leaching is represented by green streaking on bronze monuments [3]. Because of the instability of the patina, conservation techniques are usually required. On a bronze object exposed to the outdoor environment, there are different actions of the rainfall and other atmospheric agents as a function of the monument shape. In fact, we recognize sheltered and unsheltered areas as regards exposure to rainwater [4]. As a consequence of these different actions, two main patina types are formed on monuments exposed to the outdoor environment. These patinas have different electrochemical, morphological and compositional characteristics [1]. In the case of sheltered areas, the patina contains mainly copper products, stratified above a layer strongly enriched in insoluble Sn oxides, located at the interface with the uncorroded metal. Moreover, different colors of the patina result from the exposure geometry. The surface color may be pale green for unsheltered areas, and green and mat black for sheltered areas [4]. Thus, in real outdoor bronze monuments, the corrosion behavior is strongly influenced by the exposure geometry. This must be taken into account when designing conservation procedures, since the patina is in most cases the support on which corrosion inhibitors are applied. Presently, for protecting outdoor bronzes against atmospheric corrosion, inhibitors and protective treatments are used. BTA and its derivatives, which are the most common inhibitors used for copper and its alloy, were found to be toxic for the environment and human health [5, 6]. Moreover, it has been demonstrated that BTA is efficient when applied on bare copper but not as efficient when applied on bare bronze [7]. Thus it was necessary to find alternative compounds. Silane-based inhibitors (already successfully tested on copper and other metallic substrates [8]), were taken into consideration as a non-toxic, environmentally friendly alternative to BTA derivatives for bronze protection. The purpose of this thesis was based on the assessment of the efficiency of a selected compound, to protect the bronze against corrosion, which is the 3-mercapto-propyl-trimethoxy-silane (PropS-SH). It was selected thanks to the collaboration with the Corrosion Studies Centre “Aldo Daccò” at the Università di Ferrara. Since previous studies [9, 10, 11] demonstrated that the addition of nanoparticles to silane-based inhibitors leads to an increase of the protective efficiency, we also wanted to evaluate the influence of the addition of CeO2, La2O3, TiO2 nanoparticles on the protective efficiency of 3-mercapto-propyl-trimethoxy-silane, applied on pre-patinated bronze surfaces. This study is the first section of the thesis. Since restorers have to work on patinated bronzes and not on bare metal (except for contemporary art), it is important to be able to recreate the patina, under laboratory conditions, either in sheltered or unsheltered conditions to test the coating and to obtain reliable results. Therefore, at the University of Bologna, different devices have been designed to simulate the real outdoor conditions and to create a patina which is representative of real application conditions of inhibitor or protective treatments. In particular, accelerated ageing devices by wet & dry (simulating the action of stagnant rain in sheltered areas [12]) and by dropping (simulating the leaching action of the rain in unsheltered areas [1]) tests were used. In the present work, we used the dropping test as a method to produce pre-patinated bronze surfaces for the application of a candidate inhibitor as well as for evaluating its protective efficiency on aged bronze (unsheltered areas). In this thesis, gilded bronzes were also studied. When they are exposed to the outside environment, a corrosion phenomenon appears which is due to the electrochemical couple gold/copper where copper is the anode. In the presence of an electrolyte, this phenomenon results in the formation of corrosion products than will cause a blistering of the gold (or a break-up and loss of the film in some cases). Moreover, because of the diffusion of the copper salts to the surface, aggregates and a greenish film will be formed on the surface of the sample [13]. By coating gilded samples with PropS-SH and PropS-SH containing nano-particles and carrying out accelerated ageing by the dropping test, a discussion is possible on the effectiveness of this coating, either with nano-particles or not, against the corrosion process. This part is the section 2 of this thesis. Finally, a discussion about laser treatment aiming at the assessment of reversibility/re-applicability of the PropS-SH coating can be found in section 3 of this thesis. Because the protective layer loses its efficiency with time, it is necessary to find a way of removing the silane layer, before applying a new one on the “bare” patina. One request is to minimize the damages that a laser treatment would create on the patina. Therefore, different laser fluences (energy/surface) were applied on the sample surface during the treatment process in order to find the best range of fluence. In particular, we made a characterization of surfaces before and after removal of PropS-SH (applied on a naturally patinated surface, and subsequently aged by natural exposure) with laser methods. The laser removal treatment was done by the CNR Institute of Applied Physics “Nello Carrara” of Sesto Fiorentino in Florence. In all the three sections of the thesis, a range of non-destructive spectroscopic methods (Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM-EDS), μ-Raman spectroscopy, X-Ray diffractometry (XRD)) were used for characterizing the corroded surfaces. AAS (Atomic Absorption Spectroscopy) was used to analyze the ageing solutions from the dropping test in sections 1 and 2.

Synthesis and characterization of defective PBAs electrode material

Sodium manganese hexacyanoferrate (NaMnHCF) and its derivatives have been synthesized by simple co-precipitation method with addition of the citric and ascorbic acids respectively. The correspondent crystal structure, water content, chemical formula and a deep structural investigation of prepared samples have been performed by means of the combination of the laboratory and synchrotron techniques (PXRD, FT-IR, TGA, MP-AES and XAS). Electrochemical tests have been done using three-electrode system in sodium nitrate solution at different concentration. From cyclic voltammetry curves, Fe3+/2+ redox peak has been observed, whereas Mn3+/2+ peak was not always evident. Structural stability of the cycled samples has then been tested using 2D XRF imaging and Transmission X-ray microscopy (TXM) techniques. The intercalation of NaMnHCF after 20 cycles has been found by micro-XANES analysis of the highlighted spots which have been found in the XRF images. TXM has also confirmed the appearance of the intercalated particles after 50 cycles comparing the spectra between charged and discharged materials at three different edges (Mn, Fe and N). However, by comparison with lithium samples, it seems obvious that sodium samples are more homogeneous and intercalation is at the very beginning indicating the relative structural stability of sodium manganese hexacyanoferrate electrode material.

Organocatalytic tandem reactions of polyfunctional compounds for the synthesis of enantioenriched heterocycles. Reazioni tandem organocatalitiche di composti polifunzionali per la sintesi di eterocicli enantioarricchiti.

In questo lavoro di tesi sono state sviluppate reazioni domino, tandem e procedure one-pot per ottenere eterocicli enatioarricchiti. Lo sviluppo di queste metodologie sintetiche è molto importante perché permettono di ottenere molecole complesse partendo da prodotti semplici, senza effettuare ripetuti passaggi di purificazione (stop-and-go or step-by-step synthesis). Lo scopo di questo lavoro è di ottenere derivati tetraidrofuranici modificati e derivati ossoazzolinici enantioarrichiti tramite reazioni SN2-Michael o tramite reazioni aldolica-ciclizzazione-Michael usando la catalisi asimmetrica a trasferimento di fase (PTC). Come catalizzatori PTC per imprimere enantioselezione sono stati utilizzati sali di ammonio quaternario derivati dagli alcaloidi della Cinchona. Sono state ottimizzate le condizioni di reazione (base inorganica, temperatura, solvente, tempo di reazione) per i diversi substrati presi in considerazione. I prodotti target sono stati ottenuti con buone rese, ottime diastereoselezioni ma con bassa enantioselezione. I risultati ottenuti richiedono un’ulteriore ottimizzazione e dovranno essere valutate variazioni strutturali dei nucleofili utilizzati. In this thesis were developed domino, tandem reactions and one-pot procedures to obtained enantioenriched heterocycles. The development of these methodologies is very fundamental because they allow to obtain complex molecules starting from raw materials, without carrying out repeated purification steps (stop-and-go or step-by-step synthesis). The purpose of this work is to obtain enantioenriched tetrahydrofuran and oxazoline derivatives through a SN2-Michael reaction or a aldol- cyclization-Michael reaction using the phase-transfer asymmetric catalysis (PTC). For imprint enantioselection we used Cinchona alkaloids quaternary ammonium salts derivatives. The reaction conditions (inorganic base, temperature, solvent, reaction time) were optimised for the different substrates taken into account. The target products were obtained with good yields, excellent diastereoselections but with low enantioselections. The obtained results require further optimization and structural changes in the nucleophiles used must be evaluated.

Regio- e stereocontrollo nell'addizione viniloga di alchilidenossindoli a nitrostireni via organocatalisi.

The topic of this work is the simultaneous activation, promoted by 9-epi-NH2-DHQA-TU, of alkylideneoxindole and nistirene derivatives, respectively via base catalysis and hydrogen-bond catalysis. The chosen substrates, of high biological interest, are used as starting materials for a vinylogous Michael addition where we wish to control the stereochemistry of the two asymmetric carbons far away from the active site, respectively in γ and δ position. Due to the particular structure of the starting oxindoles, it is hereby presented the first variant of this reaction performed at its highest level of stereochemical complexity. It is possible as a matter of fact, to generate 24 isomers of the product. Specifically, given that the nucleophilic attack can occur from various, non equivalent regions of the starting molecule, our main goal was to achieve a complete regio- and stereocontrol of the reaction. We have verified that the reported organocatalyzed vinylogous reaction represents a valid integration of the metal-catalyzed one, since it affords highly stereochemically complex products in good to high yields and excellent optical purity.

Synthesis, reactivity and applications of 3,5-dimethyl-4-nitroisoxazole derivatives

3,5-dimethyl-4-nitroisoxazole derivatives are useful synthetic intermediates as the isoxazole nucleus chemically behaves as an ester, but establish better-defined interactions with chiral catalysts and lability of its N-O aromatic bond can unveil other groups such as 1,3-dicarbonyl compounds or carboxylic acids. In the present work, these features are employed in a 3,5-dimethyl-4-nitroisoxazole based synthesis of the γ-amino acid pregabalin, a medication for the treatment of epilepsy and neuropatic pain, in which this moiety is fundamental for the enantioselective formation of a chiral center by interaction with doubly-quaternized cinchona phase-transfer catalysts, whose ability of asymmetric induction will be investigated. Influence of this group in cinchona-derivatives catalysed stereoselective addition and Darzens reaction of a mono-chlorinated 3,5-dimethyl-4-nitroisoxazole and benzaldehyde will also be investigated.

Computer assisted synthesis and in-vitro cytotoxic evaluation of new pyrazole-fused isoquinolinoquinones derivatives as PI3K receptor antagonist with promising antitumoral activity

The importance of pyrazole and isoquinoline-5,8-dione scaffolds in medical chemistry is underlined by the high number of drugs currently on trading that contains these active ingredients. Due to their cytotoxic capability, the interest of medicinal chemists in these heterocyclic rings has grown exponentially especially, for cancer therapy. In this project, the first synthesis of pyrazole-fused isoquinoline-5,8-diones has been developed. 1,3-Dipolar cycloaddition followed by oxidative aromatization, established by our research group, has been employed. Screening of reaction conditions and characterization studies about the regioselectivity have been successfully performed. A remote control of regioselectivity, to achieve the two possible regioisomers has been accomplished. Through Molecular Docking studies, Structure-Activity relationship of differently substituted scaffolds containing our central core proved that a family of PI3K inhibitors have been discovered. Finally, in order to verify the promising antitumor activity, a first test of cell viability in vitro on T98G cell line of a solid brain tumor, the Glioblastoma Multiforme, showed cytotoxic inhibition comparable to currently trade anticancer drugs.