Structured P2P Video Streaming and Collaborative Failure Detection

Il video streaming in peer-to-peer sta diventando sempre più popolare e utiliz- zato. Per tali applicazioni i criteri di misurazione delle performance sono: - startup delay: il tempo che intercorre tra la connessione e l’inizio della ripro- duzione dello stream (chiamato anche switching delay), - playback delay: il tempo che intercorre tra l’invio da parte della sorgente e la riproduzione dello stream da parte di un peer, - time lag: la differenza tra i playback delay di due diversi peer. Tuttavia, al giorno d’oggi i sistemi P2P per il video streaming sono interessati da considerevoli ritardi, sia nella fase di startup che in quella di riproduzione. Un recente studio su un famoso sistema P2P per lo streaming, ha mostrato che solitamente i ritardi variano tra i 10 e i 60 secondi. Gli autori hanno osservato anche che in alcuni casi i ritardi superano i 4 minuti! Si tratta quindi di gravi inconvenienti se si vuole assistere a eventi in diretta o se si vuole fruire di applicazioni interattive. Alcuni studi hanno mostrato che questi ritardi sono la conseguenza della natura non strutturata di molti sistemi P2P. Ogni stream viene suddiviso in blocchi che vengono scambiati tra i peer. A causa della diffusione non strutturata del contenuto, i peer devono continuamente scambiare informazioni con i loro vicini prima di poter inoltrare i blocchi ricevuti. Queste soluzioni sono estremamente re- sistenti ai cambiamenti della rete, ma comportano una perdita notevole in termini di prestazioni, rendendo complicato raggiungere l’obiettivo di un broadcast in realtime. In questo progetto abbiamo lavorato su un sistema P2P strutturato per il video streaming che ha mostrato di poter offrire ottimi risultati con ritardi molto vicini a quelli ottimali. In un sistema P2P strutturato ogni peer conosce esattamente quale blocchi inviare e a quali peer. Siccome il numero di peer che compongono il sistema potrebbe essere elevato, ogni peer dovrebbe operare possedendo solo una conoscenza limitata dello stato del sistema. Inoltre il sistema è in grado di gestire arrivi e partenze, anche raggruppati, richiedendo una riorganizzazione limitata della struttura. Infine, in questo progetto abbiamo progettato e implementato una soluzione personalizzata per rilevare e sostituire i peer non più in grado di cooperare. Anche per questo aspetto, l’obiettivo è stato quello di minimizzare il numero di informazioni scambiate tra peer.

In-situ detection of defect formation in organic flexible electronics by Kelvin Probe Force Microscopy

Organic semiconductor technology has attracted considerable research interest in view of its great promise for large area, lightweight, and flexible electronics applications. Owing to their advantages in processing and unique physical properties, organic semiconductors can bring exciting new opportunities for broad-impact applications requiring large area coverage, mechanical flexibility, low-temperature processing, and low cost. In order to achieve highly flexible device architecture it is crucial to understand on a microscopic scale how mechanical deformation affects the electrical performance of organic thin film devices. Towards this aim, I established in this thesis the experimental technique of Kelvin Probe Force Microscopy (KPFM) as a tool to investigate the morphology and the surface potential of organic semiconducting thin films under mechanical strain. KPFM has been employed to investigate the strain response of two different Organic Thin Film Transistor with active layer made by 6,13-bis(triisopropylsilylethynyl)-pentacene (TIPS-Pentacene), and Poly(3-hexylthiophene-2,5-diyl) (P3HT). The results show that this technique allows to investigate on a microscopic scale failure of flexible TFT with this kind of materials during bending. I find that the abrupt reduction of TIPS-pentacene device performance at critical bending radii is related to the formation of nano-cracks in the microcrystal morphology, easily identified due to the abrupt variation in surface potential caused by local increase in resistance. Numerical simulation of the bending mechanics of the transistor structure further identifies the mechanical strain exerted on the TIPS-pentacene micro-crystals as the fundamental origin of fracture. Instead for P3HT based transistors no significant reduction in electrical performance is observed during bending. This finding is attributed to the amorphous nature of the polymer giving rise to an elastic response without the occurrence of crack formation.

Near Real-Time Detection Of Pipe Bursts in Water Distribution Systems

The research work presented in the thesis describes a new methodology for the automated near real-time detection of pipe bursts in Water Distribution Systems (WDSs). The methodology analyses the pressure/flow data gathered by means of SCADA systems in order to extract useful informations that go beyond the simple and usual monitoring type activities and/or regulatory reporting , enabling the water company to proactively manage the WDSs sections. The work has an interdisciplinary nature covering AI techniques and WDSs management processes such as data collection, manipulation and analysis for event detection. Indeed, the methodology makes use of (i) Artificial Neural Network (ANN) for the short-term forecasting of future pressure/flow signal values and (ii) Rule-based Model for bursts detection at sensor and district level. The results of applying the new methodology to a District Metered Area in Emilia- Romagna’s region, Italy have also been reported in the thesis. The results gathered illustrate how the methodology is capable to detect the aforementioned failure events in fast and reliable manner. The methodology guarantees the water companies to save water, energy, money and therefore enhance them to achieve higher levels of operational efficiency, a compliance with the current regulations and, last but not least, an improvement of customer service.

A Reliable Downscaling of ECG Signals for the Detection of T wave Heterogeneity Features

In cardiovascular disease the definition and the detection of the ECG parameters related to repolarization dynamics in post MI patients is still a crucial unmet need. In addition, the use of a 3D sensor in the implantable medical devices would be a crucial mean in the assessment or prediction of Heart Failure status, but the inclusion of such feature is limited by hardware and firmware constraints. The aim of this thesis is the definition of a reliable surrogate of the 500 Hz ECG signal to reach the aforementioned objective. To evaluate the worsening of reliability due to sampling frequency reduction on delineation performance, the signals have been consecutively down sampled by a factor 2, 4, 8 thus obtaining the ECG signals sampled at 250, 125 and 62.5 Hz, respectively. The final goal is the feasibility assessment of the detection of the fiducial points in order to translate those parameters into meaningful clinical parameter for Heart Failure prediction, such as T waves intervals heterogeneity and variability of areas under T waves. An experimental setting for data collection on healthy volunteers has been set up at the Bakken Research Center in Maastricht. A 16 – channel ambulatory system, provided by TMSI, has recorded the standard 12 – Leads ECG, two 3D accelerometers and a respiration sensor. The collection platform has been set up by the TMSI property software Polybench, the data analysis of such signals has been performed with Matlab. The main results of this study show that the 125 Hz sampling rate has demonstrated to be a good candidate for a reliable detection of fiducial points. T wave intervals proved to be consistently stable, even at 62.5 Hz. Further studies would be needed to provide a better comparison between sampling at 250 Hz and 125 Hz for areas under the T waves.