Experimentally and coupled CFD/CSD assisted structural and aeroelastic modelling of the Javelin UAV outboard wing section

This study presents the procedure followed to make a prediction of the critical flutter speed for a composite UAV wing. At the beginning of the study, there was no information available on the materials used for the construction of the wing, and the wing internal structure was unknown. Ground vibration tests were performed in order to detect the structure’s natural frequencies and mode shapes. From tests, it was found that the wing possesses a high stiffness, presenting well separated first bending and torsional natural frequencies. Two finite element models were developed and matched to experimental results. It has been necessary to introduce some assumptions, due to the uncertainties regarding the structure. The matching process was based on natural frequencies’ sensitivity with respect to a change in the mechanical properties of the materials. Once experimental results were met, average material properties were also found. Aerodynamic coefficients for the wing were obtained by means of a CFD software. The same analysis was also conducted when the wing is deformed in its first four mode shapes. A first approximation for flutter critical speed was made with the classical V - g technique. Finally, wing’s aeroelastic behavior was simulated using a coupled CFD/CSD method, obtaining a more accurate flutter prediction. The CSD solver is based on the time integration of modal dynamic equations, requiring the extraction of mode shapes from the previously performed finite-element analysis. Results show that flutter onset is not a risk for the UAV, occurring at velocities well beyond its operative range.

Nonlinear modelling of non-structural masonry walls under a low-intensity earthquake motion: calibration through a parametric study

This thesis aims to understand the behavior of a low-rise unreinforced masonry building (URM), the typical residential house in the Netherlands, when subjected to low-intensity earthquakes. In fact, in the last decades, the Groningen region was hit by several shallow earthquakes caused by the extraction of natural gas. In particular, the focus is addressed to the internal non-structural walls and to their interaction with the structural parts of the building. A simple and cost-efficient 2D FEM model is developed, focused on the interfaces representing mortar layers that are present between the non-structural walls and the rest of the structure. As a reference for geometries and materials, it has been taken into consideration a prototype that was built in full-scale at the EUCENTRE laboratory of Pavia (Italy). Firstly, a quasi-static analysis is performed by gradually applying a prescribed displacement on the roof floor of the structure. Sensitivity analyses are conducted on some key parameters characterizing mortar. This analysis allows for the calibration of their values and the evaluation of the reliability of the model. Successively, a transient analysis is performed to effectively subject the model to a seismic action and hence also evaluate the mechanical response of the building over time. Moreover, it was possible to compare the results of this analysis with the displacements recorded in the experimental tests by creating a model representing the entire considered structure. As a result, some conditions for the model calibration are defined. The reliability of the model is then confirmed by both the reasonable results obtained from the sensitivity analysis and the compatibility of the values obtained for the top displacement of the roof floor of the experimental test, and the same value acquired from the structural model.

Ecological modelling for next generation sequencing data

Le tecniche di next generation sequencing costituiscono un potente strumento per diverse applicazioni, soprattutto da quando i loro costi sono iniziati a calare e la qualità dei loro dati a migliorare. Una delle applicazioni del sequencing è certamente la metagenomica, ovvero l'analisi di microorganismi entro un dato ambiente, come per esempio quello dell'intestino. In quest'ambito il sequencing ha permesso di campionare specie batteriche a cui non si riusciva ad accedere con le tradizionali tecniche di coltura. Lo studio delle popolazioni batteriche intestinali è molto importante in quanto queste risultano alterate come effetto ma anche causa di numerose malattie, come quelle metaboliche (obesità, diabete di tipo 2, etc.). In questo lavoro siamo partiti da dati di next generation sequencing del microbiota intestinale di 5 animali (16S rRNA sequencing) [Jeraldo et al.]. Abbiamo applicato algoritmi ottimizzati (UCLUST) per clusterizzare le sequenze generate in OTU (Operational Taxonomic Units), che corrispondono a cluster di specie batteriche ad un determinato livello tassonomico. Abbiamo poi applicato la teoria ecologica a master equation sviluppata da [Volkov et al.] per descrivere la distribuzione dell'abbondanza relativa delle specie (RSA) per i nostri campioni. La RSA è uno strumento ormai validato per lo studio della biodiversità dei sistemi ecologici e mostra una transizione da un andamento a logserie ad uno a lognormale passando da piccole comunità locali isolate a più grandi metacomunità costituite da più comunità locali che possono in qualche modo interagire. Abbiamo mostrato come le OTU di popolazioni batteriche intestinali costituiscono un sistema ecologico che segue queste stesse regole se ottenuto usando diverse soglie di similarità nella procedura di clustering. Ci aspettiamo quindi che questo risultato possa essere sfruttato per la comprensione della dinamica delle popolazioni batteriche e quindi di come queste variano in presenza di particolari malattie.