Damping and Thermomechanical behaviour of CFRP laminates modified with rubbery nanofibers

Nanofibrous membranes are a promising material for tailoring the properties of laminated CFRP composites by embedding them into the structure. This project aimed to understand the effect of number, position and thickness of nanofibrous modifications specifically on the damping behaviour of the resulting nano-modified CFRP composite with an epoxy matrix. An improvement of damping capacity is expected to improve a composites lifetime and fatigue resistance by prohibiting the formation of microcracks and consequently hindering delamination, it also promises a rise in comfort for a range of final products by intermission of vibration propagation and therefore diminution of noise. Electrospinning was the technique employed to produce nanofibrous membranes from a blend of polymeric solutions. SEM, WAXS and DSC were utilised to evaluate the quality of the obtained membranes before they were introduced, following a specific stacking sequence, in the production process of the laminate. A suitable curing cycle in an autoclave was applied to mend the modifications together with the matrix material, ensuring full crosslinking of the matrix and therefore finalising the production process. DMA was exercised in order to gain an understanding about the effects of the different modifications on the properties of the composite. During this investigation it became apparent that a high number of modifications of laminate CFRP composites, with an epoxy matrix, with thick rubbery nanofibrous membranes has a positive effect on the damping capacity and the temperature range the effect applies in. A suggestion for subsequent studies as well as a recommendation for the production of nano-modified CFRP structures is included at the end of this document.

Assessing the influence of dam construction on the spatial and temporal evolution of population density across the United States of America

Finding the optimum location for placing a dam on a river is usually a complicated process which generally forces thousands of people to flee their homes because they will be inundated during the filling of the dam. Dams could also attract people living in the surrounding area after their construction. The goal of this research is to check for dam attractiveness for people by comparing growth rates of population density in surrounding areas after dam construction to those associated with the period antecedent to the dam construction. To this aim, 1859 dams across the United States of America and high-resolution population distribution from 1790 to 2010 are examined. By grouping dams as a function of their main purpose, water supply dams are found to be, as expected, the most attractive dams for people, with the biggest growth in population density. Irrigation dams are next, followed by hydroelectricity, flood control, Navigation, and finally Recreation dams. Fishery dams and dams for other uses suffered a decrease in population in the years after their construction. The regions with the greatest population growth were found approximately 40-45 km from the dam and at distances greater than 90 km, whereas the regions with the greatest population decline or only a modest gain were located within 10-15 km of the dam.

Caratterizzazione di sensori Low Gain Avalanche Detector (LGAD) per il sistema di tempo di volo dell'esperimento ALICE 3 a LHC

Il lavoro presentato in questa tesi analizza il comportamento elettrico di prototipi di sensori Low-Gain Avalanche Detector (LGAD) ultrasottili. L'analisi consiste in una verifica sperimentale delle caratteristiche attese di questi sensori, che sono stati selezionati come possibili candidati per la realizzazione del sistema di Time-Of-Flight (TOF) nell'esperimento ALICE 3. Concepito come evoluzione dell'esperimento ALICE attualmente in funzione al CERN, ALICE 3 rappresenta l'archetipo di una nuova generazione di esperimenti nella fisica delle collisioni di ioni pesanti, ed è previsto iniziare la propria attività di presa dati per LHC Run 5 nel 2032. Sono stati presi in considerazione 22 campioni di LGAD, di cui 11 provenienti dal wafer di produzione 5 (spessore 25 um) e gli altri 11 dal wafer 6 (spessore 35 um). In entrambi i casi, di questi 11 sensori, 6 sono campioni in configurazione LGAD-PIN e 5 sono matrici. Tutti e 22 i campioni sono stati sottoposti a misure di corrente in funzione del voltaggio, mentre solo quelli appartenenti al wafer 5 anche a misure di capacità. L'obiettivo è quello di misurare la caratteristica IV e CV per ognuno dei campioni e da queste estrarre, rispettivamente, tensione di breakdown e profilo di doping.