Analisi del comportamento a caldo dell'acciaio AISI - H11 per la stima della vita utile di matrici per estrusione

The effect of process parameters on the creep-fatigue behavior of a hot-work tool steel for aluminum extrusion die was investigated through a technological test in which the specimen geometry resembled the mandrel of a hollow extrusion die. Tests were performed on a Gleeble thermomechanical simulator by heating the specimen using joule’s effect and by applying cyclic loading up to 6.30 h or till specimen failure. Displacements during the tests at 380, 490, 540 and 580°C and under the average stresses of 400, 600 and 800 MPa were determined. In the first set of test a dwell time of 3 min was introduced during each of the tests to understand the creep behavior. The results showed that the test could indeed physically simulate the cyclic loading on the hollow die during extrusion and reveal all the mechanisms of creep-fatigue interaction. In the second set a pure fatigue laod were induced and in the third set a static creep load were induced in the specimens. Furher type of tests, finite element and microstructural analysis were presented.

Struttura di età di nasello (Merluccius merluccius, Linnaeus, 1758) in alto-medio Adriatico mediante analisi degli otoliti e frequenza di taglia

The aim of present study is to define the general framework of Merluccius merluccius population structure, to estimate the growth rate and to assess the recruitment dynamics of juveniles from Northern and Central Adriatic, through otoliths analysis. The otoliths of hake specimens collected during the MedITS trawl survey in the 2012 in GSA 17, were cleaned and 102 otoliths out of 506 were embedded, sectioned, grindined and polished to obtain frontal and sagittal sections. The whole sample were analysed under stereomicroscope and optical microscope, with camera and connected to PC provided of an image analyses program. The frequency analysis of size classes and age revealed that the species is dominated by hake with >200mm TL and > one year old. The fish average size of M. merluccius at the end of the first year of life is about 199 mm TL. Allometrics analyses between fish TL and Feret (major axis), MiniFeret (minor axis), Area, Perimeter, showed a direct proportionality among lengths. Among the 88 otoliths sections analysed, the number of daily increments read ranged from 86 to 206, within 55 and 175mm TL range. The age estimate ranged from about 2-3 to 9 months and the growth rate from 20.99 to 27.15mm TL. The hatch-date distribution, obtained by back calculation, showed that the hatching occurs in November-March. In conclusion, strong preventive measures are needed for hake adults because the success of this species seems to be linked to deep water ecosystem protection where big spawners dwell.