Atmospheric corrosion of quaternary bronzes (Cu-Sn-Zn-Pb): laboratory tests (accelerated ageing in wet & dry conditions)and field studies (the Bottego monument in Parma, Italy).

The interactions between outdoor bronzes and the environment, which lead to bronze corrosion, require a better understanding in order to design effective conservation strategies in the Cultural Heritage field. In the present work, investigations on real patinas of the outdoor monument to Vittorio Bottego (Parma, Italy) and laboratory studies on accelerated corrosion testing of inhibited (by silane-based films, with and without ceria nanoparticles) and non-inhibited quaternary bronzes are reported and discussed. In particular, a wet&dry ageing method was used both for testing the efficiency of the inhibitor and for patinating bronze coupons before applying the inhibitor. A wide range of spectroscopic techniques has been used, for characterizing the core metal (SEM+EDS, XRF, AAS), the corroded surfaces (SEM+EDS, portable XRF, micro-Raman, ATR-IR, Py-GC-MS) and the ageing solutions (AAS). The main conclusions were: 1. The investigations on the Bottego monument confirmed the differentiation of the corrosion products as a function of the exposure geometry, already observed in previous works, further highlighting the need to take into account the different surface features when selecting conservation procedures such as the application of inhibitors (i.e. the relative Sn enrichment in unsheltered areas requires inhibitors which effectively interact not only with Cu but also with Sn). 2. The ageing (pre-patination) cycle on coupons was able to reproduce the relative Sn enrichment that actually happens in real patinated surfaces, making the bronze specimens representative of the real support for bronze inhibitors. 3. The non-toxic silane-based inhibitors display a good protective efficiency towards pre-patinated surfaces, differently from other widely used inhibitors such as benzotriazole (BTA) and its derivatives. 4. The 3-mercapto-propyl-trimethoxy-silane (PropS-SH) additivated with CeO2 nanoparticles generally offered a better corrosion protection than PropS-SH.

Aereodynamics of dry helically-filleted bridge cables

Dry limited amplitude vibrations flow-transition induced vibrations were experienced on a helically-filleted tube, in a previous study performed by Kleissl and Georgakis (2012). These vibrations have never been reported in previous studies. A deep study on the same inclined-yawed cable configuration has been performed, in order to investigate and further understand the nature of these vibrations. The investigation has been carried out through passive-dynamic wind tunnel tests in the Climatic Wind Tunnel at FORCE Technology, Kgs. Lyngby, Denmark. The results are carried out in terms of aerodynamic damping and peak to peak amplitude at different flow velocities and different boundary conditions. The latter are done by testing the model with and without the spray system installed in the wind tunnel cross section, in order to understand and evaluate the influence of the spray system on the start of the vibrations mechanism and on the flow turbulence. The gained experiences are finally presented for the use in future testing activities with the purpose of improving the performance of passive-dynamic tests.

By-products of the dairy farming as raw material for the biotechnology production of polyhydroxyalkanoates

I Poliidrossialcanoati (PHA) sono poliesteri completamente biodegradabili, prodotti da microrganismi come fonte di energia e di carbonio per la sintesi di nuovo materiale cellulare, utilizzando come substrato materie prime rinnovabili. Questi poliesteri sono considerati potenziali candidati per la sostituzione delle materie plastiche convenzionali. Tuttavia, i più alti costi di produzione dei PHA in confronto a quelli delle materie plastiche derivanti dal petrolio, rappresentano il principale ostacolo per la parziale sostituzione di questi ultimi con i biopolimeri. Gli alti costi sono principalmente dovuti all'utilizzo di colture microbiche pure (in cui sia presente un solo ceppo batterico) e substrati puri e costosi. Nell'ultimo decennio è stato sviluppato un processo di produzione a tre stadi alternativo e potenzialmente a minor costo, basato sull'utilizzo di colture microbiche miste (Mixed Microbials Culture, MMC) e una varietà di substrati organici a costo contenuto o nullo, quali alcuni rifiuti dell’industria agro-alimentare. Il presente studio si è concentrato sulla prima fase del processo di produzione dei PHA da colture miste, la fermentazione acidogenica, utilizzando siero di latte come fonte di carbonio per produrre acidi organici. In particolare questo lavoro ha avuto come obiettivo quello di studiare come diverse condizioni operative utilizzate nella fase di fermentazione acidogenica possono influenzare la concentrazione e il profilo degli acidi organici prodotti. Sono stati valutati anche gli effetti dei diversi profili degli acidi organici sulla fase di selezione della coltura microbica, in termini di capacità di stoccaggio di PHA e composizione polimerica.