Real-time PMU monitoring of an IEEE 5-Bus Network implemented on OPAL system

This thesis studies the state-of-the-art of phasor measurement units (PMUs) as well as their metrological requirements stated in the IEEE C37.118.1 and C37.118.2 Standards for guaranteeing correct measurement performances. Communication systems among PMUs and their possible applicability in the field of power quality (PQ) assessment are also investigated. This preliminary study is followed by an analysis of the working principle of real-time (RT) simulators and the importance of hardware-in-the-loop (HIL) implementation, examining the possible case studies specific for PMUs, including compliance tests which are one of the most important parts. The core of the thesis is focused on the implementation of a PMU model in the IEEE 5-bus network in Simulink and in the validation of the results using OPAL RT-4510 as a real-time simulator. An initial check allows one to get an idea about the goodness of the results in Simulink, comparing the PMU data with respect to the load-flow steady-state information. In this part, accuracy indices are also calculated for both voltage and current synchrophasors. The following part consists in the implementation of the same code in OPAL-RT 4510 simulator, after which an initial analysis is carried out in a qualitative way in order to get a sense of the goodness of the outcomes. Finally, the confirmation of the results is based on an examination of the attained voltage and current synchrophasors and accuracy indices coming from Simulink models and from OPAL system, using a Matlab script. This work also proposes suggestions for an upcoming operation of PMUs in a more complex system as the Digital Twin (DT) in order to improve the performances of the already-existing protection devices of the distribution system operator (DSO) for a future enhancement of power systems reliability.

Le reti di distribuzione idrica nella sicurezza antincendio - Verifiche con il codice INFOWORKS WS

Le reti di distribuzione idrica conservano un ruolo importante ed irrinunciabile nella sicurezza antincendio, ma diversi fattori sul piano normativo e strutturale limitano la loro potenzialità  nelle fasi di estinzione dell'incendio. Ma in che modo si è evoluta in Italia negli ultimi anni la lotta all'incendio? E' ormai noto che non esistono incendi standard, quelli per i quali è possibile definire procedure d'intervento e modalità  di estinzione; non è quindi banale identificare le portate antincendio necessarie (Needed Fire Flow) e il tempo per il quale esse devono essere garantite. In certi contesti è possibile ipotizzare un certo standard d'incendio ma ciò presuppone che edifici, strutture e tutto ciò che è sottoposto ad incendio, possano essere considerati fabbricati a "regola d'arte", ovvero realizzati attraverso procedure esecutive aventi standard di qualità  certificata. Ciò è stato affrontato nei criteri di realizzazione delle nuove costruzioni, ma le vecchie costruzioni, soprattutto gli edifici presenti nei centri storici, sono evidentemente più vulnerabili e sfuggono alla possibilità  di identificare affidabili valori del NFF. Il quadro che si presenta coinvolge quindi carenze normative, contesti urbani con differente vulnerabilità  e una sostanziale disomogeneità  prestazionale delle reti di distribuzione idrica presenti nel territorio nazionale, legata non solo alla disponibilità  idrica ma, anche e soprattutto, alla conformazione della rete, ai livelli di pressione ed alla specifica capacità della rete nel sostenere incrementi di flusso dovuto al prelievo dagli idranti stradali. La scarsa conoscenza di questi aspetti, piuttosto che tradursi in miglioramenti della rete idrica e della sua efficienza ai fini antincendio, ha portato nel tempo ad adottare soluzioni alternative che agiscono principalmente sulle modalità operative di utilizzo dei mezzi dei VV.F. e sul fronte dei dispositivi antincendio privati, quali una migliore protezione passiva, legata all'uso di materiali la cui risposta all'incendio fosse la minore possibile, e protezioni attive alternative, quali impianti sprinkler, di tipo aerosol o misti. Rimangono tutte le problematiche legate alla caratterizzazione nell'area urbanizzata in termini di risposta al prelievo per incendio dagli idranti pubblici sui quali la normativa vigente non impone regole circa le prestazioni e la loro dislocazione sul territorio. Questa incertezza spesso si traduce in un maggiore dispiego di mezzi rispetto all'entità dell'incendio ed ad una scarsa possibilità  di ottimizzare l'allocazione delle unità  operative dei VV.F., con un evidente incremento del rischio nel caso in cui si verifichino più eventi di incendio contemporaneamente. La simulazione numerica avanzata, su modelli opportunamente calibrati delle reti di distribuzione, può consentire una maggiore comprensione quantitativa del livello di sicurezza antincendio offerto da una rete di distribuzione idrica.

A multi-objective genetic algorithm optimisation using variable speed pumps in water distribution systems

Due to its practical importance and inherent complexity, the optimisation of distribution networks for supplying drinking water has been the subject of extensive study for the past 30 years. The optimization is governed by sizing the pipes in the water distribution network (WDN) and / or optimises specific parts of the network such as pumps, tanks etc. or try to analyse and optimise the reliability of a WDN. In this thesis, the author has analysed two different WDNs (Anytown City and Cabrera city networks), trying to solve and optimise a multi-objective optimisation problem (MOOP). The main two objectives in both cases were the minimisation of Energy Cost (€) or Energy consumption (kWh), along with the total Number of pump switches (TNps) during a day. For this purpose, a decision support system generator for Multi-objective optimisation used. Its name is GANetXL and has been developed by the Center of Water System in the University of Exeter. GANetXL, works by calling the EPANET hydraulic solver, each time a hydraulic analysis has been fulfilled. The main algorithm used, was a second-generation algorithm for multi-objective optimisation called NSGA_II that gave us the Pareto fronts of each configuration. The first experiment that has been carried out was the network of Anytown city. It is a big network with a pump station of four fixed speed parallel pumps that are boosting the water dynamics. The main intervention was to change these pumps to new Variable speed driven pumps (VSDPs), by installing inverters capable to diverse their velocity during the day. Hence, it’s been achieved great Energy and cost savings along with minimisation in the number of pump switches. The results of the research are thoroughly illustrated in chapter 7, with comments and a variety of graphs and different configurations. The second experiment was about the network of Cabrera city. The smaller WDN had a unique FS pump in the system. The problem was the same as far as the optimisation process was concerned, thus, the minimisation of the energy consumption and in parallel the minimisation of TNps. The same optimisation tool has been used (GANetXL).The main scope was to carry out several and different experiments regarding a vast variety of configurations, using different pump (but this time keeping the FS mode), different tank levels, different pipe diameters and different emitters coefficient. All these different modes came up with a large number of results that were compared in the chapter 8. Concluding, it should be said that the optimisation of WDNs is a very interested field that has a vast space of options to deal with. This includes a large number of algorithms to choose from, different techniques and configurations to be made and different support system generators. The researcher has to be ready to “roam” between these choices, till a satisfactory result will convince him/her that has reached a good optimisation point.

Feasibility study and flow scheduling optimization of a multi-product pipeline system

The first goal of this study is to analyse a real-world multiproduct onshore pipeline system in order to verify its hydraulic configuration and operational feasibility by constructing a simulation model step by step from its elementary building blocks that permits to copy the operation of the real system as precisely as possible. The second goal is to develop this simulation model into a user-friendly tool that one could use to find an “optimal” or “best” product batch schedule for a one year time period. Such a batch schedule could change dynamically as perturbations occur during operation that influence the behaviour of the entire system. The result of the simulation, the ‘best’ batch schedule is the one that minimizes the operational costs in the system. The costs involved in the simulation are inventory costs, interface costs, pumping costs, and penalty costs assigned to any unforeseen situations. The key factor to determine the performance of the simulation model is the way time is represented. In our model an event based discrete time representation is selected as most appropriate for our purposes. This means that the time horizon is divided into intervals of unequal lengths based on events that change the state of the system. These events are the arrival/departure of the tanker ships, the openings and closures of loading/unloading valves of storage tanks at both terminals, and the arrivals/departures of trains/trucks at the Delivery Terminal. In the feasibility study we analyse the system’s operational performance with different Head Terminal storage capacity configurations. For these alternative configurations we evaluated the effect of different tanker ship delay magnitudes on the number of critical events and product interfaces generated, on the duration of pipeline stoppages, the satisfaction of the product demand and on the operative costs. Based on the results and the bottlenecks identified, we propose modifications in the original setup.