Ecological modelling of the phytoplankton dynamics in the northern Gulf of Aqaba (Red Sea)

The Gulf of Aqaba represents a small scale, easy to access, regional analogue of larger oceanic oligotrophic systems. In this Gulf, the seasonal cycles of stratification and mixing drives the seasonal phytoplankton dynamics. In summer and fall, when nutrient concentrations are very low, Prochlorococcus and Synechococcus are more abundant in the surface water. This two populations are exposed to phosphate limitation. During winter mixing, when nutrient concentrations are high, Chlorophyceae and Cryptophyceae are dominant but scarce or absent during summer. In this study it was tried to develop a simulation model based on historical data to predict the phytoplankton dynamics in the northern Gulf of Aqaba. The purpose is to understand what forces operate, and how, to determine the phytoplankton dynamics in this Gulf. To make the models data sampled in two different sampling station (Fish Farm Station and Station A) were used. The data of chemical, biological and physical factors, are available from 14th January 2007 to 28th December 2009. The Fish Farm Station point was near a Fish Farm that was operational until 17th June 2008, complete closure date of the Fish Farm, about halfway through the total sampling time. The Station A sampling point is about 13 Km away from the Fish Farm Station. To build the model, the MATLAB software was used (version 7.6.0.324 R2008a), in particular a tool named Simulink. The Fish Farm Station models shows that the Fish Farm activity has altered the nutrient concentrations and as a consequence the normal phytoplankton dynamics. Despite the distance between the two sampling stations, there might be an influence from the Fish Farm activities also in the Station A ecosystem. The models about this sampling station shows that the Fish Farm impact appears to be much lower than the impact in the Fish Farm Station, because the phytoplankton dynamics appears to be driven mainly by the seasonal mixing cycle.

Design methods and geometric modelling of scaffolds for bone tissue engineering

Every year, thousand of surgical treatments are performed in order to fix up or completely substitute, where possible, organs or tissues affected by degenerative diseases. Patients with these kind of illnesses stay long times waiting for a donor that could replace, in a short time, the damaged organ or the tissue. The lack of biological alternates, related to conventional surgical treatments as autografts, allografts, e xenografts, led the researchers belonging to different areas to collaborate to find out innovative solutions. This research brought to a new discipline able to merge molecular biology, biomaterial, engineering, biomechanics and, recently, design and architecture knowledges. This discipline is named Tissue Engineering (TE) and it represents a step forward towards the substitutive or regenerative medicine. One of the major challenge of the TE is to design and develop, using a biomimetic approach, an artificial 3D anatomy scaffold, suitable for cells adhesion that are able to proliferate and differentiate themselves as consequence of the biological and biophysical stimulus offered by the specific tissue to be replaced. Nowadays, powerful instruments allow to perform analysis day by day more accurateand defined on patients that need more precise diagnosis and treatments.Starting from patient specific information provided by TC (Computed Tomography) microCT and MRI(Magnetic Resonance Imaging), an image-based approach can be performed in order to reconstruct the site to be replaced. With the aid of the recent Additive Manufacturing techniques that allow to print tridimensional objects with sub millimetric precision, it is now possible to practice an almost complete control of the parametrical characteristics of the scaffold: this is the way to achieve a correct cellular regeneration. In this work, we focalize the attention on a branch of TE known as Bone TE, whose the bone is main subject. Bone TE combines osteoconductive and morphological aspects of the scaffold, whose main properties are pore diameter, structure porosity and interconnectivity. The realization of the ideal values of these parameters represents the main goal of this work: here we'll a create simple and interactive biomimetic design process based on 3D CAD modeling and generative algorithmsthat provide a way to control the main properties and to create a structure morphologically similar to the cancellous bone. Two different typologies of scaffold will be compared: the first is based on Triply Periodic MinimalSurface (T.P.M.S.) whose basic crystalline geometries are nowadays used for Bone TE scaffolding; the second is based on using Voronoi's diagrams and they are more often used in the design of decorations and jewellery for their capacity to decompose and tasselate a volumetric space using an heterogeneous spatial distribution (often frequent in nature). In this work, we will show how to manipulate the main properties (pore diameter, structure porosity and interconnectivity) of the design TE oriented scaffolding using the implementation of generative algorithms: "bringing back the nature to the nature".

Experimental characterization and modelling of a servo-pneumatic system for a knee loading apparatus

The new knee test rig developed in University of Bologna used pneumatic cylinder as actuator system. Specific characterization and modelling about the pneumatic cylinder and the related devices are needed in better controlling the test rig. In this thesis, an experimental environment for the related device is set up with data acquisition system using Real-time Windows Target, Simulink, MatLab. Based on the experimental data, a fitted model for the pneumatic cylinder friction is found.

Outdoor production of Isochrysis galbana (T-iso) in industrial scale photobioreactors and modelling of its photosynthesis and respiration rate

Isochrysis galbana is a widely-used strain in aquaculture in spite of its low productivity. To maximize the productivity of processes based on this microalgae strain, a model was developed considering the influence of irradiance, temperature, pH and dissolved oxygen concentration on the photosynthesis and respiration rate. Results demonstrate that this strain tolerates temperatures up to 35ºC but it is highly sensitive to irradiances higher than 500 µE·m-2·s-1 and dissolved oxygen concentrations higher than 11 mg·l-1. With the researcher group of the “Universidad de Almeria”, the developed model was validated using data from an industrial-scale outdoor tubular photobioreactor demonstrating that inadequate temperature and dissolved oxygen concentrations reduce productivity to half that which is maximal, according to light availability under real outdoor conditions. The developed model is a useful tool for managing working processes, especially in the development of new processes based on this strain and to take decisions regarding optimal control strategies. Also the outdoor production of Isochrysis galbana T-iso in industrial size tubular photobioreactors (3.0 m3) has been studied. Experiments were performed modifying the dilution rate and evaluating the biomass productivity and quality, in addition to the overall performance of the system. Results confirmed that T-iso can be produced outdoor at commercial scale in continuous mode, productivities up to 20 g·m-2·day-1 of biomass rich in proteins (45%) and lipids (25%) being obtained. The utilization of this type of photobioreactors allows controlling the contamination and pH of the cultures, but daily variation of solar radiation imposes the existence of inadequate dissolved oxygen concentration and temperature at which the cells are exposed to inside the reactor. Excessive dissolved oxygen reduced the biomass productivity to 68% of maximal, whereas inadequate temperature reduces to 63% of maximal. Thus, optimally controlling these parameters the biomass productivity can be duplicated. These results confirm the potential to produce this valuable strain at commercial scale in optimally designed/operated tubular photobioreactors as a biotechnological industry.

Mathematical modelling of integrin-like receptors systems

Nel presente lavoro, ho studiato e trovato le soluzioni esatte di un modello matematico applicato ai recettori cellulari della famiglia delle integrine. Nel modello le integrine sono considerate come un sistema a due livelli, attivo e non attivo. Quando le integrine si trovano nello stato inattivo possono diffondere nella membrana, mentre quando si trovano nello stato attivo risultano cristallizzate nella membrana, incapaci di diffondere. La variazione di concentrazione nella superficie cellulare di una sostanza chiamata attivatore dà luogo all’attivazione delle integrine. Inoltre, questi eterodimeri possono legare una molecola inibitrice con funzioni di controllo e regolazione, che chiameremo v, la quale, legandosi al recettore, fa aumentare la produzione della sostanza attizzatrice, che chiameremo u. In questo modo si innesca un meccanismo di retroazione positiva. L’inibitore v regola il meccanismo di produzione di u, ed assume, pertanto, il ruolo di modulatore. Infatti, grazie a questo sistema di fine regolazione il meccanismo di feedback positivo è in grado di autolimitarsi. Si costruisce poi un modello di equazioni differenziali partendo dalle semplici reazioni chimiche coinvolte. Una volta che il sistema di equazioni è impostato, si possono desumere le soluzioni per le concentrazioni dell’inibitore e dell’attivatore per un caso particolare dei parametri. Infine, si può eseguire un test per vedere cosa predice il modello in termini di integrine. Per farlo, ho utilizzato un’attivazione del tipo funzione gradino e l’ho inserita nel sistema, valutando la dinamica dei recettori. Si ottiene in questo modo un risultato in accordo con le previsioni: le integrine legate si trovano soprattutto ai limiti della zona attivata, mentre le integrine libere vengono a mancare nella zona attivata.

Analytic modelling of the galactic fountain in the Milky Way potential

Le galassie a spirale, come la Via Lattea, sono caratterizzate dalla presenza di gas freddo e formazione stellare e vengono perciò chiamate star-forming. Per creare nuove stelle è necessaria una sufficiente riserva di gas, la cui disponibilità governa l’evoluzione della galassia stessa. Finora, non è stato individuato con certezza un meccanismo che possa alimentare la formazione di nuove stelle nelle galassie star-forming. Una delle possibili sorgenti di tale gas è l’alone galattico caldo (corona galattica) il cui raffreddamento e successivo accrescimento possono essere stimolati dal processo di fontana galattica. L’esplosione di supernovae porta nubi di gas freddo in orbita al di sopra del disco stellare; queste nubi raggiungono altezze dell’ordine del kiloparsec, interagendo con la corona di gas caldo. Il moto delle nubi all’interno di un mezzo meno denso comporta l’instaurarsi dell’instabilità di Kelvin-Helmholtz, che ’strappa’ gas dalle nubi e causa la condensazione di materia coronale. Quest’ultima viene quindi accresciuta e, ricadendo sul disco, trasferisce nuovo materiale alla galassia e ne alimenta la formazione stellare. Lo scopo di questa tesi è derivare un modello analitico di fontana galattica che consenta di ottenere una formulazione analitica per il tempo orbitale, cioè il tempo richiesto alle nubi per ricadere sul disco galattico. Infatti, più u tempo le nubi impiegano per attraversare il materiale coronale caldo e ricadere sul disco, più materiale viene accresciuto durante l’orbita. Conoscendo i tempi orbitali sarebbe possibile calcolare il tasso di accrescimento legato al fenomeno di fontana e studiarne l’andamento con il raggio del disco. Questo modello potrebbe rivelarsi utile per lo studio dell’impatto della fontana nell’evoluzione globale del disco galattico e della chimica dell’intera galassia.

Experimentally and coupled CFD/CSD assisted structural and aeroelastic modelling of the Javelin UAV outboard wing section

This study presents the procedure followed to make a prediction of the critical flutter speed for a composite UAV wing. At the beginning of the study, there was no information available on the materials used for the construction of the wing, and the wing internal structure was unknown. Ground vibration tests were performed in order to detect the structure’s natural frequencies and mode shapes. From tests, it was found that the wing possesses a high stiffness, presenting well separated first bending and torsional natural frequencies. Two finite element models were developed and matched to experimental results. It has been necessary to introduce some assumptions, due to the uncertainties regarding the structure. The matching process was based on natural frequencies’ sensitivity with respect to a change in the mechanical properties of the materials. Once experimental results were met, average material properties were also found. Aerodynamic coefficients for the wing were obtained by means of a CFD software. The same analysis was also conducted when the wing is deformed in its first four mode shapes. A first approximation for flutter critical speed was made with the classical V - g technique. Finally, wing’s aeroelastic behavior was simulated using a coupled CFD/CSD method, obtaining a more accurate flutter prediction. The CSD solver is based on the time integration of modal dynamic equations, requiring the extraction of mode shapes from the previously performed finite-element analysis. Results show that flutter onset is not a risk for the UAV, occurring at velocities well beyond its operative range.

Metabolism modelling of the Urban Water System of Oslo using the package UWOT

Oslo, capitale della Norvegia, sta sperimentando un’improvvisa crescita della popolazione e secondo le stime fornite da Statistics Norway si prevede un aumento di 200 000 abitanti entro il 2040. La crescita della popolazione comporterà un rilevante aumento di domanda di acqua e, insieme ad altri fattori quali l’età delle infrastrutture e i cambiamenti climatici, sarà responsabile di una notevole pressione sulle infrastrutture idriche presenti. In risposta alla necessità di tempestivi cambiamenti, il gestore del servizio idrico della città (Oslo VAV) ha deciso di finanziare progetti per migliorare la robustezza delle infrastrutture idriche. Il lavoro di tesi si inserisce all’interno del progetto E3WDM, istituito nel 2005 con lo scopo di definire una gestione più efficiente della risorsa idrica di Oslo. L’obiettivo generale della tesi è la creazione di un modello metabolico attraverso il software UWOT (Makropoulos et al., 2008) con lo scopo di rappresentare i consumi idrici di due tipiche tipologie abitative nella città di Oslo. L’innovazione di questo studio consiste nella definizione e nella modellazione della domanda idrica all’interno delle abitazioni ad un livello di dettaglio molto elevato. Il nuovo approccio fornito da UWOT consente la simulazione di differenti strategie di intervento e la successiva gestione ottimale della risorsa idrica in grado di minimizzare i consumi di acqua, di energia e i costi, compatibilmente con la domanda idrica richiesta. Il lavoro di tesi comprende: -La descrizione del software UWOT, in particolare lo scopo del modello, l’innovativo approccio adottato, la struttura e il procedimento per creare un modello del sistema idrico urbano. -La definizione dei dati richiesti per la simulazione dei consumi idrici all’interno delle abitazioni nella città di Oslo e i metodi utilizzati per raccoglierli -L’applicazione del modello UWOT per la definizione dei trend di consumi idrici e la successiva analisi dei risultati

Geometrico-static modelling of continuum parallel robots

In this thesis, we explore three methods for the geometrico-static modelling of continuum parallel robots. Inspired by biological trunks, tentacles and snakes, continuum robot designs can reach confined spaces, manipulate objects in complex environments and conform to curvilinear paths in space. In addition, parallel continuum manipulators have the potential to inherit some of the compactness and compliance of continuum robots while retaining some of the precision, stability and strength of rigid-links parallel robots. Subsequently, the foundation of our work is performed on slender beam by applying the Cosserat rod theory, appropriate to model continuum robots. After that, three different approaches are developed on a case study of a planar parallel continuum robot constituted of two connected flexible links. We solve the forward and inverse geometrico-static problem namely by using (a) shooting methods to obtain a numerical solution, (b) an elliptic method to find a quasi-analytical solution, and (c) the Corde model to perform further model analysis. The performances of each of the studied methods are evaluated and their limits are highlighted. This thesis is divided as follows. Chapter one gives the introduction on the field of the continuum robotics and introduce the parallel continuum robots that is studied in this work. Chapter two describe the geometrico-static problem and gives the mathematical description of this problem. Chapter three explains the numerical approach with the shooting method and chapter four introduce the quasi-analytical solution. Then, Chapter five introduce the analytic method inspired by the Corde model and chapter six gives the conclusions of this work.

Numerical modelling of hydrodinamics and morphodynamics for the Friuli Venezia Giulia coast

Integrated Coastal Zone Management (ICZM) should be considered as one of the main components to be able to implement sustainable development. Friuli Venezia Giulia region with its 93 km of coastline is committed to investing its resources in projects aimed at studying the evolution of the coast. In this report, reference will be made to the area in front of the municipality of Grado, where the Banco della Mula di Muggia is located. Starting from previous studies and surveys, morphology of the coastal stretch between the municipality of Grado and the mouth of the Isonzo river will be reproduced through numerical modeling tools, to simulate its hydrodynamic behavior on an annual basis and also as a function of significant events such as storms, calm events or floods of the Isonzo river. The software employed will be the MIKE by DHI with in particular the implementation of "Littoral Drift" and "MIKE 21/3" Coupled models. The first to calculate net and gross longshore transport on an annual basis along a transverse profile, the latter is a modelling system for coastal application that will be used for the analysis of significant events effects. Although not primary focus of this work, there will be included an initial review of finger bars. These particular sand formations are present at the south-western border of the Banco della Mula di Muggia and may have an impact on it. This work could form the starting point of future investigations to build on the findings of this report.

Numerical modelling of axially loaded piled foundations with physical tests validation

L'oggetto della tesi è la modellazione numerica di pali di fondazione per turbine eoliche in ambiente offshore. Il metodo di modellazione comprende l'interpretazione di prove CPT per l'estrapolazione dei parametri geotecnici del terreno, la creazione di un modello dell'interazione tra struttura e terreno tramite il software agli elementi finiti Abaqus, la sua verifica, l'ottimizzazione dell'estensione del modello del terreno e della mesh e la simulazione numerica del comportamento di pali caricati assialmente in compressione. Grazie al confronto con i risultati di test su modelli fisici, eseguiti nel laboratorio dell'istituto Fraunhofer IWES di Hannover, di tre pali aventi la stessa geometria ma installati in punti con diverse condizioni di compattazione della sabbia, è stata possibile la messa a punto di una strategia di simulazione più accurata possibile e la sua validazione. A conclusione del lavoro è stato eseguito un esempio di design di una fondazione jacket per una turbina eolica offshore.

Non-linear modelling of microwave devices embedding nano-ferroelectric materials for real-time reconfigurable transmitarray

In this thesis work a nonlinear model for Interdigitated Capacitors (IDCs) based on ferroelectric materials, is proposed. Through the properties of materials such as Hafnium-Zirconium Oxide (HfZrO2), it is possible to realize tunable radiofrequency (RF) circuits. In particular, the model proposed in this thesis describes the use of an IDC, realized on a High-Resistivity silicon substrate, as a phase shifter for beam-steering applications. The model is obtained starting from already present experimental measurements, through which it is possible to identify a circuit model. The model is tested for both low power values and other power values using Harmonic Balance simulations, which show an excellent convergence of the model up to 40 dBm of input power. Furthermore, an array composed by two patches operating both at 2.55 GHz, which exploits the tunable properties of the HfZrO-based IDC is proposed. At 0dBm the model shows a 47° phase shift with polarization -1 V and 1 V which leads to a 11° steering of the main lobe of the array.

Gyrokinetic modelling of plasma transport and investigation on test particle dynamics

Turbulent plasmas inside tokamaks are modeled and studied using guiding center theory, applied to charged test particles, in a Hamiltonian framework. The equations of motion for the guiding center dynamics, under the conditions of a constant and uniform magnetic field and turbulent electrostatic field are derived by averaging over the fast gyroangle, for the first and second order in the guiding center potential, using invertible changes of coordinates such as Lie transforms. The equations of motion are then made dimensionless, exploiting temporal and spatial periodicities of the model chosen for the electrostatic potential. They are implemented numerically in Python. Fast Fourier Transform and its inverse are used. Improvements to the original Python scripts are made, notably the introduction of a power-law curve fitting to account for anomalous diffusion, the possibility to integrate the equations in two steps to save computational time by removing trapped trajectories, and the implementation of multicolored stroboscopic plots to distinguish between trapped and untrapped guiding centers. The post-processing of the results is made in MATLAB. The values and ranges of the parameters chosen for the simulations are selected based on numerous simulations used as feedback tools. In particular, a recurring value for the threshold to detect trapped trajectories is evidenced. Effects of the Larmor radius, the amplitude of the guiding center potential and the intensity of its second order term are studied by analyzing their diffusive regimes, their stroboscopic plots and the shape of guiding center potentials. The main result is the identification of cases anomalous diffusion depending on the values of the parameters (mostly the Larmor radius). The transitions between diffusive regimes are identified. The presence of highways for the super-diffusive trajectories are unveiled. The influence of the charge on these transitions from diffusive to ballistic behaviors is analyzed.

Optimized methods to digital survey and 3D modelling of cultural heritage assets

Currently making digital 3D models and replicas of the cultural heritage assets play an important role in the preservation and having a high detail source for future research and intervention. In this dissertation, it is tried to assess different methods for digital surveying and making 3D replicas of cultural heritage assets in different scales of size. The methodologies vary in devices, software, workflow, and the amount of skill that is required. The three phases of the 3D modelling process are data acquisition, modelling, and model presentation. Each of these sections is divided into sub-sections and there are several approaches, methods, devices, and software that may be employed, furthermore, the selection process should be based on the operation's goal, available facilities, the scale and properties of the object or structure to be modeled, as well as the operators' expertise and experience. The most key point to remember is that the 3D modelling operation should be properly accurate, precise, and reliable; therefore, there are so many instructions and pieces of advice on how to perform 3D modelling effectively. It is an attempt to compare and evaluate the various ways of each phase in order to explain and demonstrate their differences, benefits, and drawbacks in order to serve as a simple guide for new and/or inexperienced users.