Chemical composition modification of casting aluminium alloys for engine applications

The research activities were focused on evaluating the effect of Mo addition to mechanical properties and microstructure of A354 aluminium casting alloy. Samples, with increasing amount of Mo, were produced and heat treated. After heat treatment and exposition to high temperatures samples underwent microstructural and chemical analyses, hardness and tensile tests. The collected data led to the optimization of both casting parameters, for obtaining a homogeneous Mo distribution in the alloy, and heat treatment parameters, allowing the formation of Mo based strengthening precipitates stable at high temperature. Microstructural and chemical analyses highlighted how Mo addition in percentage superior to 0.1% wt. can modify the silicon eutectic morphology and hinder the formation of iron based β intermetallics. High temperature exposure curves, instead, showed that after long exposition hardness is slightly influenced by heat treatment while the effect of Mo addition superior to 0,3% is negligible. Tensile tests confirmed that the addition of 0.3%wt Mo induces an increase of about 10% of ultimate tensile strength after high temperature exposition (250°C for 100h) while heat treatments have slight influence on mechanical behaviour. These results could be exploited for developing innovative heat treatment sequence able to reduce residual stresses in castings produced with A354 modified with Mo.

Preparazione e proprietà di trasporto di gas di membrane a base di polimeri e nanoplatelets grafenici per la cattura di CO2 da processi energetici

Lo scopo di questo studio sperimentale è stato quello di determinare l’effetto dell’aggiunta di piccole quantità (1wt%) di grafene e ossido di grafene al poli(1-trimetilsilil-1-propino) (PTMSP). Il PTMSP è uno dei polimeri più promettenti per la separazione di gas tramite membrane polimeriche grazie al suo elevato volume libero (26%). Sono state studiate sia membrane spesse (60-180 micron) preparate per solvent casting che sottili (2-10 micron) preparate per spin coating supportate su un film poroso di polipropilene commerciale. L’ossido di grafene aumenta la permeabilità del PTMSP, mentre il grafene ha mostrato un comportamento variabile in funzione del protocollo di preparazione che è risultato dipendere fortemente dalla velocità di evaporazione del solvente. Le membrane così ottenute sono state testate al permeometro. È stata osservata una dipendenza della permeabilità in funzione dello spessore del film e del grado di invecchiamento. In particolare, la presenza di nanofiller riduce il grado di invecchiamento dei film di PTMSP. Nel caso specifico della coppia di gas permeanti He/CO2, i campioni hanno mostrato un comportamento intercambiabile di selettività all’He o alla CO2, modulabile in funzione della temperatura tra 30-60°C e del filler utilizzato.

Mechanochemical solvent-free synthesis of Sn-β Zeolite and Ag2O/TiO2 catalysts

Preparations of heterogeneous catalysts are usually complex processes that involve several procedures as precipitation, crystallization and hydrothermal treatments. This processes are really dependent by the operative conditions such as temperature, pH, concentration etc. Hence the resulting product is extremely affected by any possible variations in these parameters making this synthesis really fragile. With the aim to improve these operations has been decided to exploit a new possible strong environment-respectful process by mechanochemical treatment, which permits to carry out solvent free-solvent synthesis exploiting the Mixer Mill MM400 (Retsch) in order to have reproducible results. Two different systems have been studied in this kind of synthesis: a tin β -zeolite tested in a H-trasnfer reaction of cyclohexanone and a silver on titania catalyst used in the fluorination of 2,2 dimethyl glucaric acid. Each catalyst has been characterized by different techniques in order to understand the transformations involved in the mechanochemical treatment.