Forecasts on the dark energy anisotropic stress for the esa euclid survey

The cosmological constant Λ seems to be a not satisfactory explanation of the late-time accelerated expansion of the Universe, for which a number of experimental evidences exist; therefore, it has become necessary in the last years to consider alternative models of dark energy, meant as cause of the accelerated expansion. In the study of dark energy models, it is important to understand which quantities can be determined starting from observational data, without assuming any hypothesis on the cosmological model; such quantities have been determined in Amendola, Kunz et al., 2012. In the same paper it has been further shown that it is possible to estabilish a relation between the model-independent parameters and the anisotropic stress η, which can be also expressed as a combination of the functions appearing in the most general Lagrangian for the scalar-tensor theories, the Horndeski Lagrangian. In the present thesis, the Fisher matrix formalism is used to perform a forecast on the constraints that will be possible to make on the anisotropic stress η in the future, starting from the estimated uncertainties for the galaxy clustering and weak lensing measurements which will be performed by the European Space Agency Euclid mission, to be launched in 2020. Further, constraints coming from supernovae-Ia observations are considered. The forecast is performed for two cases in which (a) η is considered as depending from redshift only and (b) η is constant and equal to one, as in the ΛCDM model.

Properties of cosmic voids in dark energy simulations

The last decade has witnessed the establishment of a Standard Cosmological Model, which is based on two fundamental assumptions: the first one is the existence of a new non relativistic kind of particles, i. e. the Dark Matter (DM) that provides the potential wells in which structures create, while the second one is presence of the Dark Energy (DE), the simplest form of which is represented by the Cosmological Constant Λ, that sources the acceleration in the expansion of our Universe. These two features are summarized by the acronym ΛCDM, which is an abbreviation used to refer to the present Standard Cosmological Model. Although the Standard Cosmological Model shows a remarkably successful agreement with most of the available observations, it presents some longstanding unsolved problems. A possible way to solve these problems is represented by the introduction of a dynamical Dark Energy, in the form of the scalar field ϕ. In the coupled DE models, the scalar field ϕ features a direct interaction with matter in different regimes. Cosmic voids are large under-dense regions in the Universe devoided of matter. Being nearby empty of matter their dynamics is supposed to be dominated by DE, to the nature of which the properties of cosmic voids should be very sensitive. This thesis work is devoted to the statistical and geometrical analysis of cosmic voids in large N-body simulations of structure formation in the context of alternative competing cosmological models. In particular we used the ZOBOV code (see ref. Neyrinck 2008), a publicly available void finder algorithm, to identify voids in the Halos catalogues extraxted from CoDECS simulations (see ref. Baldi 2012 ). The CoDECS are the largest N-body simulations to date of interacting Dark Energy (DE) models. We identify suitable criteria to produce voids catalogues with the aim of comparing the properties of these objects in interacting DE scenarios to the standard ΛCDM model, at different redshifts. This thesis work is organized as follows: in chapter 1, the Standard Cosmological Model as well as the main properties of cosmic voids are intro- duced. In chapter 2, we will present the scalar field scenario. In chapter 3 the tools, the methods and the criteria by which a voids catalogue is created are described while in chapter 4 we discuss the statistical properties of cosmic voids included in our catalogues. In chapter 5 the geometrical properties of the catalogued cosmic voids are presented by means of their stacked profiles. In chapter 6 we summarized our results and we propose further developments of this work.

One-loop quantum gravity in arbitrary dimensions

In the context of perturbative quantum gravity, the first three Seeley-DeWitt coefficients represent the counterterms needed to renormalize the graviton one-loop effective action in $D=4$ dimensions. A standard procedure to compute them is by means of the traditional heat kernel method. However, these coefficients can be studied also from a first quantization perspective through the so-called $\mathcal{N} = 4$ spinning particle model. It relies on four supersymmetries on the worldline and a set of worldline gauge invariances. In the present work, a different worldline model, able to reproduce correctly the Seeley-DeWitt coefficients in arbitrary dimensions, is developed. After a covariant gauge-fixing procedure of the Einstein-Hilbert action with cosmological constant, a worldline representation of the kinetic operators identified by its quadratic approximation is found. This quantum mechanical representation can be presented in different but equivalent forms. Some of these different forms are discussed and their equivalence is verified by deriving the gauge invariant counterterms needed to renormalize quantum gravity with cosmological constant at one-loop.

A next-to-leading order calculation of the impact of primordial magnetic fields into cosmological observables

In this thesis, we perform a next-to-leading order calculation of the impact of primordial magnetic fields (PMF) into the evolution of scalar cosmological perturbations and the cosmic microwave background (CMB) anisotropy. Magnetic fields are everywhere in the Universe at all scales probed so far, but their origin is still under debate. The current standard picture is that they originate from the amplification of initial seed fields, which could have been generated as PMFs in the early Universe. The most robust way to test their presence and constrain their features is to study how they impact on key cosmological observables, in particular the CMB anisotropies. The standard way to model a PMF is to consider its contribution (quadratic in the magnetic field) at the same footing of first order perturbations, under the assumptions of ideal magneto-hydrodynamics and compensated initial conditions. In the perspectives of ever increasing precision of CMB anisotropies measurements and of possible uncounted non-linear effects, in this thesis we study effects which go beyond the standard assumptions. We study the impact of PMFs on cosmological perturbations and CMB anisotropies with adiabatic initial conditions, the effect of Alfvén waves on the speed of sound of perturbations and possible non-linear behavior of baryon overdensity for PMFs with a blue spectral index, by modifying and improving the publicly available Einstein-Boltzmann code SONG, which has been written in order to take into account all second-order contributions in cosmological perturbation theory. One of the objectives of this thesis is to set the basis to verify by an independent fully numerical analysis the possibility to affect recombination and the Hubble constant.

Gravitational waves as dark sirens: an astrophysical and cosmological analysis

Despite the success of the ΛCDM model in describing the Universe, a possible tension between early- and late-Universe cosmological measurements is calling for new independent cosmological probes. Amongst the most promising ones, gravitational waves (GWs) can provide a self-calibrated measurement of the luminosity distance. However, to obtain cosmological constraints, additional information is needed to break the degeneracy between parameters in the gravitational waveform. In this thesis, we exploit the latest LIGO-Virgo-KAGRA Gravitational Wave Transient Catalog (GWTC-3) of GW sources to constrain the background cosmological parameters together with the astrophysical properties of Binary Black Holes (BBHs), using information from their mass distribution. We expand the public code MGCosmoPop, previously used for the application of this technique, by implementing a state-of-the-art model for the mass distribution, needed to account for the presence of non-trivial features, i.e. a truncated power law with two additional Gaussian peaks, referred to as Multipeak. We then analyse GWTC-3 comparing this model with simpler and more commonly adopted ones, both in the case of fixed and varying cosmology, and assess their goodness-of-fit with different model selection criteria, and their constraining power on the cosmological and population parameters. We also start to explore different sampling methods, namely Markov Chain Monte Carlo and Nested Sampling, comparing their performances and evaluating the advantages of both. We find concurring evidence that the Multipeak model is favoured by the data, in line with previous results, and show that this conclusion is robust to the variation of the cosmological parameters. We find a constraint on the Hubble constant of H0 = 61.10+38.65−22.43 km/s/Mpc (68% C.L.), which shows the potential of this method in providing independent constraints on cosmological parameters. The results obtained in this work have been included in [1].

Cosmological predictions for a scalar tensor dark energy model by a dedicated Einstein-Boltzmann code

We have extended the Boltzmann code CLASS and studied a specific scalar tensor dark energy model: Induced Gravity

Thermal inflation and the cosmological moduli problem

Ho studiato la possibilità di soluzione per il problema cosmologico dei moduli (CMP) presente a causa della compattificazione delle dimensioni extra tramite un periodo di inflazione a basse energie (Thermal Inflation). L'elaborato consta di cinque capitoli. Il primo introduce il lettore alla problematica dei moduli partendo dalla teoria Kaluza-Klein. Il secondo riguarda interamente il CMP e altri problemi cosmologici associati ai moduli. Nel terzo viene descritta la thermal inflation e le condizioni di funzionamento. Nel quarto capitolo viene preso in esame il problema di stabilizzazione dei moduli nella teoria di stringa tipo IIB: vengono descritti sia il meccanismo KKTL che il LVS. L'ultimo capitolo consiste nel calcolo della diluizione dei moduli, enunciata prima in un contesto generale e infine applicata al LVS, tramite la thermal inflation. Viene altresì presa in esame la possibilità di due epoche di thermal inflation, al fine di ottenere una diluizione più efficiente dei moduli. In LVS sono presenti due moduli, differenti per massa e vita media. Il più leggero è soggetto al CMP e si trova che, anche dopo due periodi di thermal inflation vi è ancora un numero eccessivo di tali campi, in quanto se da un lato la thermal inflation ne diliusca la densità iniziale, dall'altro ne causa una forte riproduzione, dovuta essenzialmente alle caratteristiche del modulo

Bispectrum of cosmological models with massive neutrinos

Uno dei più importanti campi di ricerca che coinvolge gli astrofisici è la comprensione della Struttura a Grande Scala dell'universo. I principi della Formazione delle Strutture sono ormai ben saldi, e costituiscono la base del cosiddetto "Modello Cosmologico Standard". Fino agli inizi degli anni 2000, la teoria che spiegava con successo le proprietà statistiche dell'universo era la cosiddetta "Teoria Perturbativa Standard". Attraverso simulazioni numeriche e osservazioni di qualità migliore, si è evidenziato il limite di quest'ultima teoria nel descrivere il comportamento dello spettro di potenza su scale oltre il regime lineare. Ciò spinse i teorici a trovare un nuovo approccio perturbativo, in grado di estendere la validità dei risultati analitici. In questa Tesi si discutono le teorie "Renormalized Perturbation Theory"e"Multipoint Propagator". Queste nuove teorie perturbative sono la base teorica del codice BisTeCca, un codice numerico originale che permette il calcolo dello spettro di potenza a 2 loop e del bispettro a 1 loop in ordine perturbativo. Come esempio applicativo, abbiamo utilizzato BisTeCca per l'analisi dei bispettri in modelli di universo oltre la cosmologia standard LambdaCDM, introducendo una componente di neutrini massicci. Si mostrano infine gli effetti su spettro di potenza e bispettro, ottenuti col nostro codice BisTeCca, e si confrontano modelli di universo con diverse masse di neutrini.

Zoomed simulations of Halo segregation in cosmological models with two species of coupled dark matter

La materia ordinaria copre soli pochi punti percentuali della massa-energia totale dell'Universo, che è invece largamente dominata da componenti “oscure”. Il modello standard usato per descriverle è il modello LambdaCDM. Nonostante esso sembri consistente con la maggior parte dei dati attualmente disponibili, presenta alcuni problemi fondamentali che ad oggi restano irrisolti, lasciando spazio per lo studio di modelli cosmologici alternativi. Questa Tesi mira a studiare un modello proposto recentemente, chiamato “Multi-coupled Dark Energy” (McDE), che presenta interazioni modificate rispetto al modello LambdaCDM. In particolare, la Materia Oscura è composta da due diversi tipi di particelle con accoppiamento opposto rispetto ad un campo scalare responsabile dell'Energia Oscura. L'evoluzione del background e delle perturbazioni lineari risultano essere indistinguibili da quelle del modello LambdaCDM. In questa Tesi viene presentata per la prima volta una serie di simulazioni numeriche “zoomed”. Esse presentano diverse regioni con risoluzione differente, centrate su un singolo ammasso di interesse, che permettono di studiare in dettaglio una singola struttura senza aumentare eccessivamente il tempo di calcolo necessario. Un codice chiamato ZInCo, da me appositamente sviluppato per questa Tesi, viene anch'esso presentato per la prima volta. Il codice produce condizioni iniziali adatte a simulazioni cosmologiche, con differenti regioni di risoluzione, indipendenti dal modello cosmologico scelto e che preservano tutte le caratteristiche dello spettro di potenza imposto su di esse. Il codice ZInCo è stato usato per produrre condizioni iniziali per una serie di simulazioni numeriche del modello McDE, le quali per la prima volta mostrano, grazie all'alta risoluzione raggiunta, che l'effetto di segregazione degli ammassi avviene significativamente prima di quanto stimato in precedenza. Inoltre, i profili radiale di densità ottenuti mostrano un appiattimento centrale nelle fasi iniziali della segregazione. Quest'ultimo effetto potrebbe aiutare a risolvere il problema “cusp-core” del modello LambdaCDM e porre limiti ai valori dell'accoppiamento possibili.

Modelling the Halo mass number counts in modified gravity cosmological scenarios

In this Thesis work we investigate some of different cosmological background scenarios using one of the main probes used in cosmology: the halo mass function. The observed abundance of galaxy clusters (or similarly DM haloes) can indeed be compared to its theoretical predictions to derive fundamental constrains on the cosmological scenario assumed. Given the importance of exploring and constraining models degenerate with the ΛCDM one, we test the applicability of some notable halo mass function models to these scenarios. To this purpose, we made use of the DUSTGRAIN-pathfinder N-body simulations, which assume cosmological scenarios that include modified gravity in the form of f(R) models and massive neutrinos. We carried on the analysis of 3 simulation snapshots at different redshifts, z = 0, 0.5, 1, building multiple samples of dark matter haloes by applying different overdensity thresholds during the procedure of halo identification. We started our analysis by considering the halo mass function model introduced by Despali et al. (2016), who proposed a parametrization that encapsulates the effect of the different halo mass definitions and the relative evolution with the redshift. We calibrated the main parameters of this relation by using the ΛCDM halo catalogues extracted from the DUSTGRAIN-pathfinder simulations, fitting the measured halo abundances at all redshifts and density thresholds. Afterwards we tested the same model parametrization with halo catalogues extracted from the simulations implementing both modified gravity and massive neutrinos. We repeated therefore the calibration procedure on these data to search for discrepancies with respect to the ΛCDM model. Finally we focused the analysis on the cosmological models implementing modified gravity only. We took our ΛCDM calibrated halo mass function and we modified it with the additional f (R) gravity form proposed by Gupta et al. (2022).

Exploiting the clustering of cosmic voids as a novel cosmological probe

The investigations of the large-scale structure of our Universe provide us with extremely powerful tools to shed light on some of the open issues of the currently accepted Standard Cosmological Model. Until recently, constraining the cosmological parameters from cosmic voids was almost infeasible, because the amount of data in void catalogues was not enough to ensure statistically relevant samples. The increasingly wide and deep fields in present and upcoming surveys have made the cosmic voids become promising probes, despite the fact that we are not yet provided with a unique and generally accepted definition for them. In this Thesis we address the two-point statistics of cosmic voids, in the very first attempt to model its features with cosmological purposes. To this end, we implement an improved version of the void power spectrum presented by Chan et al. (2014). We have been able to build up an exceptionally robust method to tackle with the void clustering statistics, by proposing a functional form that is entirely based on first principles. We extract our data from a suite of high-resolution N-body simulations both in the LCDM and alternative modified gravity scenarios. To accurately compare the data to the theory, we calibrate the model by accounting for a free parameter in the void radius that enters the theory of void exclusion. We then constrain the cosmological parameters by means of a Bayesian analysis. As far as the modified gravity effects are limited, our model is a reliable method to constrain the main LCDM parameters. By contrast, it cannot be used to model the void clustering in the presence of stronger modification of gravity. In future works, we will further develop our analysis on the void clustering statistics, by testing our model on large and high-resolution simulations and on real data, also addressing the void clustering in the halo distribution. Finally, we also plan to combine these constraints with those of other cosmological probes.

Amplification mechanisms of inflationary spectra in induced gravity

Inflation is the primordial stage of accelerated expansion of the Universe which solves the issues of the initial conditions of a decelerating Universe (horizon, flatness and entropy problems). Moreover, it is supposed that quantum fluctuations originated during the first moments after the Big Bang gave rise to the formation of galaxies and other structures of the Universe when inflation ends. Among these structures also primordial black holes (PBHs) may have been generated. The interest in PBHs relies on their possible connection with dark matter: they could constitute a portion or even the whole dark matter content of our Universe.\\ In this work we consider inflation in the Induced Gravity (IR) context and study possible mechanisms of amplification of the curvature perturbations generated during the cosmic acceleration. In particular we consider the possibility of a period of Constant Roll (CR). Starting from the previous work of Starobinsky et al. Our final purpose is to analyse the power spectrum of the scalar perturbations and to find in which conditions there is an enhancement of the power spectrum possibly leading to PBHs formation.

Relativistic Hydrodynamics in Isotropic and Anisotropic Cosmological Backgrounds

A seguito di recenti risultati nel campo dell’Astrofisica, con questo elaborato ci si propone di approfondire il ruolo della viscosità in una classe di modelli cosmologici. La discussione ha lo scopo di generalizzare delle tecniche applicate con successo nello studio dei fluidi ideali a sistemi dove anche la viscosità é un parametro che necessita di essere largamente preso in considerazione. Nello specifico, ci si serve di strumenti computazionali e geometrici e di teoria delle equazioni differenziali alle derivate parziali per comprendere, da un punto di vista matematico, come associare le Equazioni di Einstein ai fluidi in specifici background cosmologici. Questo elaborato parte dallo studio dei fluidi ideali in un background di tipo FLRW al fine di generalizzarlo a fluidi viscosi che scorrono in un background di tipo Bianchi I. Infine si indicano alcuni problemi ancora aperti relativi al caso dissipativo e le possibili strategie risolutive di tali questioni.