N-Heterocyclic carbene complexes of silver, rhodium and iron: structures, dynamics and catalysis

The research performed in the framework of this Master Thesis has been directly inspired by the recent work of an organometallic research group led by Professor Maria Cristina Cassani on a topic related to the structures, dynamics and catalytic activity of N-heterocyclic carbene-amide rhodium(I) complexes1. A series of [BocNHCH2CH2ImR]X (R = Me, X = I, 1a’; R = Bz, X = Br, 1b’; R = trityl, X = Cl, 1c’) amide-functionalized imidazolium salts bearing increasingly bulky N-alkyl substituents were synthetized and characterized. Subsequently, these organic precursors were employed in the synthesis of silver(I) complexes as intermediate compounds on a way to rhodium(I) complexes [Rh(NBD)X(NHC)] (NHC = 1-(2-NHBoc-ethyl)-3-R-imidazolin-2-ylidene; X = Cl, R = Me (3a’), R = Bz (3b’), R = trityl (3c’); X = I, R = Me (4a’)). VT NMR studies of these complexes revealed a restricted rotation barriers about the metal-carbene bond. However, while the rotation barriers calculated for the complexes in which R = Me, Bz (3a’,b’ and 4a) matched the experimental values, this was not true in the trityl case 3c’, where the experimental value was very similar to that obtained for compound 3b’ and much smaller with respect to the calculated one. In addition, the energy barrier derived for 3c’ from line shape simulation showed a strong dependence on the temperature, while the barriers measured for 3a’,b’ did not show this effect. In view of these results and in order to establish the reasons for the previously found inconsistency between calculated and experimental thermodynamic data, the first objective of this master thesis was the preparation of a series of rhodium(I) complexes [Rh(NBD)X(NHC)] (NHC = 1-benzyl-3-R-imidazolin-2-ylidene; X = Cl, R = Me, Bz, trityl, tBu), containing the benzyl substituent as a chiral probe, followed by full characterization. The second objective of this work was to investigate the catalytic activity of the new rhodium compounds in the hydrosilylation of terminal alkynes for comparison purposes with the reported complexes. Another purpose of this work was to employ the prepared N-heterocyclic ligands in the synthesis of iron(II)-NHC complexes.

Bidentate N-heterocyclic carbene complex of Manganese as catalyst for hydrosilylation and hydroboration of double and triple bonds

Scopo del presente lavoro di tesi è la sintesi di un complesso di manganese contenente un legante bis N-eterociclico e la sua applicazione come catalizzatore nelle reazioni di idrosililazione e idroborazione di doppi e tripli legami. I composti organici sililati e borilati sono importanti prodotti intermedi in diversi settori della chimica fine grazie alla loro stabilità e alla loro capacità di essere ampiamente funzionalizzati. Idroborazione e idrosililazione, grazie allo sviluppo di catalizzatori appositi, permettono di ottenere questi composti riducendo coprodotti, sottoprodotti e condizioni operative estreme. Generalmente i catalizzatori impiegati industrialmente contengono metalli di transizione costosi, rari e non biocompatibili. Per questo motivo negli ultimi anni la ricerca si è concentrata sullo sviluppo di nuovi catalizzatori a base di metalli della prima serie di transizione tra cui il manganese, noto per essere abbondante sulla crosta terrestre, economico e biocompatibile. I composti N-eterociclici (NHC) sono una classe di leganti tra le più utilizzate poiché oltre a una grossa variabilità di caratteristiche steriche ed elettroniche, consentono di stabilizzare la specie metallica. I complessi N-eterociclici di manganese sono stati scarsamente applicati nelle reazioni di idroborazione e idrosililazione. Per questo motivo, il gruppo dove ho svolto il mio tirocinio si è dedicato a questo tipo di ricerca, sintetizzando e testando un complesso bis-NHC di manganese nell’idrosililazione di carbonili e solfossidi. Il mio lavoro si inserisce all’interno di questo ampio progetto, applicando nuovamente lo stesso complesso su una serie di substrati e reazioni differenti. In particolare, l’idrosililazione è stata applicata su alchini, alcheni e su carbonili (in questo caso attivando il complesso con la luce visibile). Inoltre, si è testata l’attività catalitica del complesso nell’idroborazione di alchini.

Synthesis of novel cobalt and iron complexes for sustainable catalytic hydrogenations

Aim of the present work of thesis is to synthesize new non-noble metal based complexes to be employ in redox reactions by a metal-ligand cooperative mechanism. The need of replacing toxic and expensive precious metal complexes with more available and benign metals, has led to the development of new compounds based on cobalt and iron, which are the metals investigated in this study. A carbonyl-tetrahydroborato-bis[(2-diisopropylphosphino)ethyl]amine-cobalt complex bearing a PNP-type ligand is synthesized by a three-step route. Optimization attempt of reaction route were assessed in order to lowering reaction times and solvent waste. New cobalt complex has been tested in esters hydrogenation as well as in acceptorless dehydrogenative coupling of ethanol. Other varieties of substrates were also tested in order to evaluate any possible applications. Concerning iron complex, dicarbonyl-(η4-3,4-bis(4-methoxyphenyl)-2,5-diphenylcyclopenta-2,4-dienone)(1,3-dimethyl-ilidene)iron is synthesized by a three steps route, involving transmetallation of a silver complex, derived from an imidazolium salt, to iron complex. In order to avoid solvent waste, optimization is assessed. Studies were performed to assess activity of triscarbonyl iron precursor toward imidazolium salt and silver complexes.

Sintesi e Caratterizzazione di Elettrodi Modificati Chimicamente con nuovi complessi Carbenici del Ferro

The Chemically Modified Electrodes (CME) are widely used in electroanalytical chemistry as chemical sensors. The interest in the covalent anchoring of a redox mediator on the electrode surface is increasing, because it allows the sensibility and the selectivity of this kind of systems to improve. My work is situated in this field of research and involves the synthesis of new Iron(0) complexes that contain cyclopentadienone, N-heterocyclic carbene (NHC) and carbonyl ancillary ligands. These complexes have shown electrochemical properties similar to those of ferrocene (organometallic compound widely used as electrochemical sensor). These complexes have been properly functionalized with a EDOT group in the NHC ligand side chain that it was after used for the realization of Electrochemically Modified PEDOT thanks to copolymerization reaction between the functionalized complex and the EDOT in different amounts. All the synthetic steps were assisted by suitable characterizations (NMR, IR, ESI-MS, cyclic voltammetry and X-ray for the monomeric compound as imidazolium salt and NHC functionalized complexes; cyclic voltammetry, IR e SEM for the copolymers). The properties of the polymer as a selective sensor was preliminarily investigated for dopamine and 2-propanol.

I) Improving low photocurrent of pseudorotaxane based solar cell II) Synthesis and characterization of new Fe(0) cyclopentadienone complexes

Next to conventional solar panels that harvest direct sunlight, p-type dye-sensitized solar cells (DSSCs) have been developed, which are able to harvest diffuse sunlight. Due to unwanted charge recombination events p-type DSSCs exhibit low power conversion efficiencies (PCEs). Previous research has shown that dye-redox mediator (RM) interactions can prevent these recombination events, resulting in higher PCEs. It is unknown how the nature of dye-RM interactions affects the PCEs of pseudorotaxane-based solar cells. In this research this correlation is investigated by comparing one macrocycle, the 3-NDI, in combination with the three dyes that contains a recognition sites. 2D-DOSY-NMR experiments have been conducted to evaluate the diffusion constants (LogD) of the three couple. The research project has been stopped due to the coronavirus pandemic. The continuation of this thesis would have been to synthesize a dye on the basis of the data obtained from the diffusion tests and attempt the construction of a solar cell to then evaluate its effectiveness. During my training period I synthetized new Fe(0) cyclopentadienone compounds bearing a N-Heterocyclic Carbene ligand. The aim of the thesis was to achieve water solubility by modifications of the cyclopentadienone ligand. These new complexes have been modified using a sulfonation reaction, replacing an hydroxyl with a sulfate group, on the alkyl backbone of the cyclopentadienone ligand. All the complexes were characterized with IR, ESI-MS and NMR spectroscopy, and a new Fe(0) cyclopentadienone complex, involved as an intermediate, was obtained as a single crystal and was characterized also with X-Ray spectroscopy.

Synthesis of manganese organometallic complexes

Il presente lavoro di tesi si inserisce in un progetto di ricerca volto alla sintesi di nuovi complessi di metalli di transizione per lo sviluppo di catalizzatori da impiegare in reazioni di catalisi omogenea. In particolare il mio progetto si è concentrato sulla sintesi di complessi organometallici di manganese con leganti carbenici N-eterociclici (NHC). La scelta dei leganti è stata effettuata in modo tale da poter avere leganti chelanti NHC di tipo MIC (mesoionic carbene) sintetizzati tramite cicloaddizione tra un alchino ed un azide catalizzata da rame (CuAAC) e N-alchilazione. Lo studio di questi complessi a base di manganese è ancora tutt’oggi agli albori, leganti NHC vengono molto utilizzati grazie alla possibilità di variarne le proprietà steriche ed elettroniche e alla possibilità di formare legami forti con quasi tutti i metalli. Il manganese è stato scelto poiché un elemento abbondante, poco tossico e poco costoso. The present thesis work is part of a research project aimed at the synthesis of new transition metal complexes to be used in homogeneous catalysis reactions. In particular my project focused on the synthesis of manganese organometallic complexes with N-heterocyclic carbene ligands (NHC). The choice of ligands was carried out to have NHC chelating ligands of the class of MIC (mesoionic carbene). These ligands are synthesized by cycloaddition between alkyl and azide with a copper-catalyzed reaction (CuAAC) and N-alkylation in order to obtain MIC after deprotonation. The study of these manganese-based complexes is still in its infancy today, NHC ligands are widely used thanks to the possibility of varying their steric and electronic properties and the possibility of forming strong bonds with almost all metals. The choice of manganese was made because is an abundant, low-toxic and inexpensive element.

Theoretical and experimental investigations on homologation of ethanol to butanol using a ruthenium-based catalyst

The mechanism of homologation of bioethanol to butanol and higher alcohols via the Guerbet reaction was computationally and experimentally investigated. The catalytic pathway involves a ruthenium-based complex and a base co-catalyst which work simultaneously. Due to selectivity issues, secondary products were formed and high competition between main pathway and side reactions was recorded. Herein, the overall catalytic mechanism for all the processes involved in was investigated, also considering the principal side reactions, using density functional theory (DFT) methods and experiments to confirm theoretical outcomes. Due to the complexity of the reaction network, kinetic simulations were established from DFT results, confirming experimental products distribution and giving insights into the factors governing the reaction mechanism.

Characterization of in-gap electronic states in two-dimensional single crystal PEA2PbBr4 perovskite for X-ray detection

Hybrid Organic-Inorganic Halide Perovskites (HOIPs) include a large class of materials described with the general formula ABX3, where A is an organic cation, B an inorganic cation and X an halide anion. HOIPs show excellent optoelectronic characteristics such as tunable band gap, high adsorption coefficient and great mobility life-time. A subclass of these materials, the so-called two- dimensional (2D) layered HOIPs, have emerged as potential alternatives to traditional 3D analogs to enhance the stability and increase performance of perovskite devices, with particular regard in the area of ionizing radiation detectors, where these materials have reached truly remarkable milestones. One of the key challenges for future development of efficient and stable 2D perovskite X-ray detector is a complete understanding of the nature of defects that lead to the formation of deep states. Deep states act as non-radiative recombination centers for charge carriers and are one of the factors that most hinder the development of efficient 2D HOIPs-based X-ray detectors. In this work, deep states in PEA2PbBr4 were studied through Photo-Induced Current Transient Spectroscopy (PICTS), a highly sensitive spectroscopic technique capable of detecting the presence of deep states in highly resistive ohmic materials, and characterizing their activation energy, capture cross section and, under stringent conditions, the concentration of these states. The evolution of deep states in PEA 2 PbBr 4 was evaluated after exposure of the material to high doses of ionizing radiation and during aging (one year). The data obtained allowed us to evaluate the contribution of ion migration in PEA2PbBr4. This work represents an important starting point for a better understanding of transport and recombination phenomena in 2D perovskites. To date, the PICTS technique applied to 2D perovskites has not yet been reported in the scientific literature.