Measurement of LSP-induced residual stresses and fatigue life on thin-walled aluminium alloys specimens

This thesis work encloses activities carried out in the Laser Center of the Polytechnic University of Madrid and the laboratories of the University of Bologna in Forlì. This thesis focuses on the superficial mechanical treatment for metallic materials called Laser Shock Peening (LSP). This process is a surface enhancement treatment which induces a significant layer of beneficial compressive residual stresses underneath the surface of metal components in order to improve the detrimental effects of the crack growth behavior rate in it. The innovation aspect of this work is the LSP application to specimens with extremely low thickness. In particular, after a bibliographic study and comparison with the main treatments used for the same purposes, this work analyzes the physics of the operation of a laser, its interaction with the surface of the material and the generation of the surface residual stresses which are fundamentals to obtain the LSP benefits. In particular this thesis work regards the application of this treatment to some Al2024-T351 specimens with low thickness. Among the improvements that can be obtained performing this operation, the most important in the aeronautic field is the fatigue life improvement of the treated components. As demonstrated in this work, a well-done LSP treatment can slow down the progress of the defects in the material that could lead to sudden failure of the structure. A part of this thesis is the simulation of this phenomenon using the program AFGROW, with which have been analyzed different geometric configurations of the treatment, verifying which was better for large panels of typical aeronautical interest. The core of the LSP process are the residual stresses that are induced on the material by the interaction with the laser light, these can be simulated with the finite elements but it is essential to verify and measure them experimentally. In the thesis are introduced the main methods for the detection of those stresses, they can be mechanical or by diffraction. In particular, will be described the principles and the detailed realization method of the Hole Drilling measure and an introduction of the X-ray Diffraction; then will be presented the results I obtained with both techniques. In addition to these two measurement techniques will also be introduced Neutron Diffraction method. The last part refers to the experimental tests of the fatigue life of the specimens, with a detailed description of the apparatus and the procedure used from the initial specimen preparation to the fatigue test with the press. Then the obtained results are exposed and discussed.

Genetic patterns in recovered specimens of Caretta caretta from the Adriatic Sea

The Adriatic Sea is considered a feeding and developmental area for Mediterranean loggerhead turtles, but this area is severely threatened by human impacts. In the Adriatic Sea loggerhead turtles are often found stranded or floating, but they are also recovered as by-catch from fishing activities. Nevertheless, information about population structuring and origin of individuals found in the Adriatic Sea are still limited. Cooperation with fishermen and a good network of voluntary collaborators are essential for understanding their distribution, ecology and for developing conservation strategies in the Adriatic Sea. In this study, a comparative analysis of biometric data and DNA sequence polymorphism of the long fragment of the mitochondrial control region was carried out on ninety-three loggerheads recovered from three feeding areas in the Adriatic Sea: North-western, North-eastern and South Adriatic. Differences in turtles body sizes (e.g. Straight Carapace Length) among the three recovery areas and relationship between SCL and the type of recovery were investigated. The origin of turtles from Mediterranean rookeries and the use of the Adriatic feeding habitats by loggerheads in different life-stages were assessed to understand the migratory pathway of the species. The analysis of biometric data revealed a significant difference in turtle sizes between the Southern and the Northern Adriatic. Moreover, size of captured turtles resulted significantly different from the size of stranded and floating individuals. Actually, neritic sub-adults and adults are more affected by incidental captures than juveniles because of their feeding behavior. The Bayesian mixed-stock analysis showed a strong genetic relationship between the Adriatic aggregates and Mediterranean rookeries, while a low pro¬portion of individuals of Atlantic origin were detected in the Adriatic feeding grounds. The presence of migratory pathways towards the Adriatic Sea due to the surface current system was reinforced by the finding of individuals bearing haplotypes endemic to the nesting populations of Libya, Greece and Israel. A relatively high contribution from Turkey and Cyprus to the Northwest and South Adriatic populations was identified when the three sampled areas were analyzed independently. These results have to be taken in account in a conservative perspective, since coastal hazards, affecting the population of turtles feeding in the Adriatic Sea may also affect the nesting populations of the Eastern Mediterranean with a unique genetic pattern.