Polymer-liquid crystal interface: a molecular dynamics study

Liquid crystals (LCs) are an interesting class of soft condensed matter systems characterized by an unusual combination of fluidity and long-range order, mainly known for their applications in displays (LCDs). However, the interest in LC continues to grow pushed by their application in new technologies in medicine, optical imaging, micro and nano technologies etc. In LCDs uniaxial alignment of LCs is mainly achieved by a rubbing process. During this treatment, the surfaces of polymer coated display substrates are rubbed in one direction by a rotating cylinder covered with a rubbing cloth. Basically, LC alignment involves two possible aligning directions: uniaxial planar (homogeneous) and vertical (homeotropic) to the display substrate. An interesting unresolved question concerning LCs regards the origin of their alignment on rubbed surfaces, and in particular on the polymeric ones used in the display industry. Most studies have shown that LCs on the surface of the rubbed polymer film layer are lying parallel to the rubbing direction. In these systems, micrometric grooves are generated on the film surface along the rubbing direction and also the polymer chains are stretched in this direction. Both the parallel aligned microgrooves and the polymer chains at the film surface may play a role in the LC alignment and it is not easy to quantify the effect of each contribution. The work described in this thesis is an attempt to find new microscopic evidences on the origin of LC alignment on polymeric surfaces through molecular dynamics (MD) simulations, which allow the investigation of the phenomenon with atomic detail. The importance of the arrangement of the polymeric chains in LCs alignment was studied by performing MD simulations of a thin film of a typical nematic LC, 4-cyano-4’-pentylbiphenyl (5CB), in contact with two different polymers: poly(methyl methacrylate)(PMMA) and polystyrene (PS). At least four factors are believed to influence the LC alignment: 1. the interactions of LCs with the backbone vinyl chains; 2. the interactions of LCs with the oriented side groups; 3. the anisotropic interactions of LCs with nanometric grooves; 4. the presence of static surface charges. Here we exclude the effect of microgrooves and of static surface charges from our virtual experiment, by using flat and neutral polymer surfaces, with the aim of isolating the chemical driving factors influencing the alignment of LC phases on polymeric surfaces.

Sintesi di PNA a libertà conformazionale ridotta

The present work started a research project aimed at the synthesis of conformationally “locked” PNA (Peptide Nucleic Acids) monomers. Compared to classic aeg-PNA, this structural modification would result in an improvement in the pairing properties with natural nucleic acids, due to entropic variations in the process. Specifically, an attempt was made to build a PNA monomer around a β-lactam ring. That ring could be imagined as obtained by linking the methylene groups in α position of both the nucleobase and the carboxyl function. These structural properties would imply pre-organization of the final oligomer, improving the pairing process in biological systems. The first step of this work was the investigation of the Staudinger reaction for the ciclization of the lactam ring, and in particular the activation method of the carboxylic group of the nucleobase derivatives. Use of triazine chloride led to the synthesis of the adenine-based β-lactam-PNA. Attempts to synthesize the same monomer based on cytosine, guanine and thymine were unsuccessful, so alternative methods for carboxylic group activation were investigated. Conversion of carboxylic acids to acyl chlorides led to a partial result: despite the method worked well with analogues of the final reactants, it didn’t worked with substrates needed for lactam based PNAs. Search for a valid activation process continued involving carbonyl diimidazole, Mukayama reagent, and LDA (with methylester derivative of nucelobase) without good results. Last, it was investigated a different synthetic approach by first synthesizing a proper backbone with a chlorine in the β- lactam ring. This chlorine ring should undergo substitution by a nucleobase anion to give the desired PNA monomer. Unluckily also this synthetic route didn’t lead to the desired monomers.

Synthesis in millireactor system and stability of intermediates for the functionalization of imidazole

This Master thesis presents the results obtained in the curricular traineeship, carried out within the laboratories of the Department of Chemistry of the University of Bergen, during the Erasmus period, and within the Department of Industrial Chemistry of the University of Bologna. The project followed in Bergen concerned the synthesis of key intermediates used for the functionalization of the backbone of imidazole, using N,N'- diiodo-5,5-dimethylhydantoin (“DIH”) as an iodinating agent, and employing an innovative kind of chemical reactor: the “Multijet Oscillating Disc Millireactor” (MJOD Reactor). Afterwards, the work performed in Bologna consisted in verifying the stability in solution of the above mentioned N,N'-diiodo-5,5-dimethylhydantoin utilising spectrophotometric techniques and High Performance Liquid Chromatography analyses (HPLC).