Gilded bronze conservation: assessment of protective treatments by accelerated ageing and of treatment removal procedures by laser cleaning

In the current study, we analyze the effectiveness of an organosilane compound, 3-mercapto-propyl-tri-methoxy-silane (abbreviated PropS-SH), in the corrosion protection of fire-gilded bronzes. Firstly, the coating was applied on as-gilded bronze. Subsequently, it was also applied on pre-patinated bronze, because the substrate on which protective coatings are applied in real conservation interventions are corroded artifacts (cleaning procedures never remove all the corrosion products). Aiming to obtain results that simulate the situation of real artifacts, a dropping test that simulates outdoor exposure in runoff conditions (unsheltered areas of monuments) was employed in order to prepatinate the gilded bronze samples, which are the substrate for applying the protective coating. The preparation of the samples by applying the protective coating was performed in collaboration with the Corrosion Studies Centre “Aldo Daccò” from Ferrara University. After the artificial exposure cycles the samples underwent investigations through a variety of spectroscopic methods including SEM, Raman, FIB, AAS and color measurements. In order to evaluate the possible removal of the organosilane coating, protected samples were subjected to laser cleaning tests and characterized by SEM/EDS so as to assess the changes in composition and morphology of the treated surfaces. The laser cleaning treatment was performed at the Institute of Applied Physics “Nello Carrara” (CNR Sesto Fiorentino (FI)). The morphology and chemical composition of the samples was observed before and after the operation in order to obtain information about the fluence and type of laser which are best suited to the removal of this type of coating.

The Scrum approach to software development

Agile methodologies have become the standard approach to software development. The most popular and used one is Scrum. Scrum is a very simple and flexible framework that respond to unpredictability in a really effective way. However, his implementation must be correct, and since Scrum tells you what to do but not how to do it, this is not trivial. In this thesis I will describe the Scrum Framework, how to implement it and a tool that can help to do this. The thesis is divided into three parts. The first part is called Scrum. Here I will introduce the framework itself, its key concepts and its components. In Scrum there are three components: roles, meetings and artifacts. Each of these is meant to accomplish a series of specific tasks. After describing the “what to do”, in the second part, Best Practices, I will focus on the “how to do it”. For example, how to decide which items should be included in the next sprint, how to estimate tasks, and how should the team workspace be. Finally, in the third part called Tools, I will introduce Visual Studio Online, a cloud service from Microsoft that offers Git and TFVC repositories and the opportunity to manage projects with Scrum. == Versione italiana: I metodi Agile sono diventati l’approccio standard per lo sviluppo di software. Il più famoso ed utilizzato è Scrum. Scrum è un framework molto semplice e flessibile che risponde ai cambiamenti in una maniera molto efficace. La sua implementazione deve però essere corretta, e visto che Scrum ci dice cosa fare ma non come farlo, questo non risulta essere immediato. In questa tesi descriverò Scrum, come implementarlo ed uno strumento che ci può aiutare a farlo. La tesi è divisa in tre parti. La prima parte è chiamata Scrum. Qui introdurrò il framework, i suoi concetti base e le sue componenti. In Scrum ci sono tre componenti: i ruoli, i meeting e gli artifact. Ognuno di questi è studiato per svolgere una serie di compiti specifici. Dopo aver descritto il “cosa fare”, nella seconda parte, Best Practices, mi concentrerò sul “come farlo”. Ad esempio, come decidere quali oggetti includere nella prossima sprint, come stimare ogni task e come dovrebbe essere il luogo di lavoro del team. Infine, nella terza parte chiamata Tools, introdurrò Visual Studio Online, un servizio cloud della Microsoft che offre repository Git e TFVC e l’opportunità di gestire un progetto con Scrum.

Analysis of retrieved shoulder prostheses

In the last years the number of shoulder arthroplasties has been increasing. Simultaneously the study of their shape, size and strength and the reasons that bring to a possible early explantation have not yet been examined in detail. The research carried out directly on explants is practically nonexistent, this means a poor understanding of the mechanisms leading the patient and so the surgeon, to their removal. The analysis of the mechanisms which are the cause of instability, dislocation, broken, fracture, etc, may lead to a change in the structure or design of the shoulder prostheses and lengthen the life of the implant in situ. The idea was to analyze 22 explants through three methods in order to find roughness, corrosion and surface wear. In the first method, the humeral heads and/or the glenospheres were examined with the interferometer, a machine that through electromagnetic waves gives information about the roughness of the surfaces under examination. The output of the device was a total profile containing both roughness and information on the waves (representing the spatial waves most characteristic on the surface). The most important value is called "roughness average" and brings the average value of the peaks found in the local defects of the surfaces. It was found that 42% of the prostheses had considerable peak values in the area where the damage was caused by the implant and not only by external events, such as possibly the surgeon's hand. One of the problems of interest in the use of metallic biomaterials is their resistance to corrosion. The clinical significance of the degradation of metal implants has been the purpose of the second method; the interaction between human body and metal components is critical to understand how and why they arrive to corrosion. The percentage of damage in the joints of the prosthetic components has been calculated via high resolution photos and the software ImageJ. The 40% and 50% of the area appeared to have scratches or multiple lines due to mechanical artifacts. The third method of analysis has been made through the use of electron microscopy to quantify the wear surface in polyethylene components. Different joint movements correspond to different mechanisms of damage, which were imprinted in the parts of polyethylene examined. The most affected area was located mainly in the side edges. The results could help the manufacturers to modify the design of the prostheses and thus reduce the number of explants. It could also help surgeons in choosing the model of the prosthesis to be implanted in the patient.

Applications of advanced and dual energy computed tomography in proton therapy

This thesis focuses on advanced reconstruction methods and Dual Energy (DE) Computed Tomography (CT) applications for proton therapy, aiming at improving patient positioning and investigating approaches to deal with metal artifacts. To tackle the first goal, an algorithm for post-processing input DE images has been developed. The outputs are tumor- and bone-canceled images, which help in recognising structures in patient body. We proved that positioning error is substantially reduced using contrast enhanced images, thus suggesting the potential of such application. If positioning plays a key role in the delivery, even more important is the quality of planning CT. For that, modern CT scanners offer possibility to tackle challenging cases, like treatment of tumors close to metal implants. Possible approaches for dealing with artifacts introduced by such rods have been investigated experimentally at Paul Scherrer Institut (Switzerland), simulating several treatment plans on an anthropomorphic phantom. In particular, we examined the cases in which none, manual or Iterative Metal Artifact Reduction (iMAR) algorithm were used to correct the artifacts, using both Filtered Back Projection and Sinogram Affirmed Iterative Reconstruction as image reconstruction techniques. Moreover, direct stopping power calculation from DE images with iMAR has also been considered as alternative approach. Delivered dose measured with Gafchromic EBT3 films was compared with the one calculated in Treatment Planning System. Residual positioning errors, daily machine dependent uncertainties and film quenching have been taken into account in the analyses. Although plans with multiple fields seemed more robust than single field, results showed in general better agreement between prescribed and delivered dose when using iMAR, especially if combined with DE approach. Thus, we proved the potential of these advanced algorithms in improving dosimetry for plans in presence of metal implants.