Compatibilità aeronautica. Definizione dei vincoli fisici per le aree limitrofe all'Aeroporto "G. Marconi" di Bologna

Per garantire la sicurezza di tutte le operazioni in volo (avvicinamento, decollo, holding, ecc..) il decreto legge del 15 marzo del 2006 n. 151 ha imposto la redazione di opportune cartografie basate sul Regolamento ENAC per la Costruzione e l’Esercizio degli Aeroporti e sulla normativa internazionale ICAO così da poterle annettere agli Strumenti Urbanistici del territorio e governare lo sviluppo delle costruzioni. La sicurezza delle operazioni in volo è garantita attraverso delle Superfici di Delimitazione Ostacoli che impongono dei vincoli plano-altimetrici nelle aree limitrofe agli Aeroporti, quindi costruzioni, alberi e lo stesso terreno non devono forare queste superfici altrimenti diventerebbero “Ostacoli” alla navigazione aerea. Per gli ostacoli già presenti sono definiti dei provvedimenti da adottarsi in funzione della superficie che questi forano: potranno essere abbattuti se ricadenti in aree critiche come in prossimità delle piste oppure essere segnalati in mappe in uso ai piloti e anche con segnali visivi posizionati sugli stessi. Per quanto riguarda le future costruzioni, queste non potranno mai diventare Ostacolo in quanto sarà obbligatorio rispettare i vincoli plano-altimetrici. La tesi di laurea in questione vuole illustrare come si è arrivati alla redazione delle sopraccitate mappe nel caso specifico dell'Aeroporto Guglielmo Marconi di Bologna; sono analizzate nel primo capitolo le caratteristiche fisiche degli Aeroporti per acquisire una certa padronanza su termini tecnici che compaiono nei capitoli successivi (è inoltre presente un glossario). Nel secondo capitolo è individuato il percorso normativo che ha portato alla redazione dell’ultima revisione al Codice della Navigazione. Il capitolo 3 introduce le superfici di delimitazione ostacoli secondo quanto esposto nel Regolamento per la Costruzione e l’Esercizio degli Aeroporti di ENAC; il capitolo 4 è dedicato al lay-out dell’Aeroporto Guglielmo Marconi di Bologna. Infine la tesi si conclude con il capitoli 5 nel quale sono esposte le fasi e le metodologie usate per la realizzazione delle planimetrie e con il capitolo 6 in cui si discute delle problematiche sorte a causa dell’orografia del territorio che deve tenersi nella giusta considerazione per la definizione dei suddetti vincoli aeronautici.

Bioremediation of PAHs - Limitations and soultions

Introduction 1.1 Occurrence of polycyclic aromatic hydrocarbons (PAH) in the environment Worldwide industrial and agricultural developments have released a large number of natural and synthetic hazardous compounds into the environment due to careless waste disposal, illegal waste dumping and accidental spills. As a result, there are numerous sites in the world that require cleanup of soils and groundwater. Polycyclic aromatic hydrocarbons (PAHs) are one of the major groups of these contaminants (Da Silva et al., 2003). PAHs constitute a diverse class of organic compounds consisting of two or more aromatic rings with various structural configurations (Prabhu and Phale, 2003). Being a derivative of benzene, PAHs are thermodynamically stable. In addition, these chemicals tend to adhere to particle surfaces, such as soils, because of their low water solubility and strong hydrophobicity, and this results in greater persistence under natural conditions. This persistence coupled with their potential carcinogenicity makes PAHs problematic environmental contaminants (Cerniglia, 1992; Sutherland, 1992). PAHs are widely found in high concentrations at many industrial sites, particularly those associated with petroleum, gas production and wood preserving industries (Wilson and Jones, 1993). 1.2 Remediation technologies Conventional techniques used for the remediation of soil polluted with organic contaminants include excavation of the contaminated soil and disposal to a landfill or capping - containment - of the contaminated areas of a site. These methods have some drawbacks. The first method simply moves the contamination elsewhere and may create significant risks in the excavation, handling and transport of hazardous material. Additionally, it is very difficult and increasingly expensive to find new landfill sites for the final disposal of the material. The cap and containment method is only an interim solution since the contamination remains on site, requiring monitoring and maintenance of the isolation barriers long into the future, with all the associated costs and potential liability. A better approach than these traditional methods is to completely destroy the pollutants, if possible, or transform them into harmless substances. Some technologies that have been used are high-temperature incineration and various types of chemical decomposition (for example, base-catalyzed dechlorination, UV oxidation). However, these methods have significant disadvantages, principally their technological complexity, high cost , and the lack of public acceptance. Bioremediation, on the contrast, is a promising option for the complete removal and destruction of contaminants. 1.3 Bioremediation of PAH contaminated soil & groundwater Bioremediation is the use of living organisms, primarily microorganisms, to degrade or detoxify hazardous wastes into harmless substances such as carbon dioxide, water and cell biomass Most PAHs are biodegradable unter natural conditions (Da Silva et al., 2003; Meysami and Baheri, 2003) and bioremediation for cleanup of PAH wastes has been extensively studied at both laboratory and commercial levels- It has been implemented at a number of contaminated sites, including the cleanup of the Exxon Valdez oil spill in Prince William Sound, Alaska in 1989, the Mega Borg spill off the Texas coast in 1990 and the Burgan Oil Field, Kuwait in 1994 (Purwaningsih, 2002). Different strategies for PAH bioremediation, such as in situ , ex situ or on site bioremediation were developed in recent years. In situ bioremediation is a technique that is applied to soil and groundwater at the site without removing the contaminated soil or groundwater, based on the provision of optimum conditions for microbiological contaminant breakdown.. Ex situ bioremediation of PAHs, on the other hand, is a technique applied to soil and groundwater which has been removed from the site via excavation (soil) or pumping (water). Hazardous contaminants are converted in controlled bioreactors into harmless compounds in an efficient manner. 1.4 Bioavailability of PAH in the subsurface Frequently, PAH contamination in the environment is occurs as contaminants that are sorbed onto soilparticles rather than in phase (NAPL, non aqueous phase liquids). It is known that the biodegradation rate of most PAHs sorbed onto soil is far lower than rates measured in solution cultures of microorganisms with pure solid pollutants (Alexander and Scow, 1989; Hamaker, 1972). It is generally believed that only that fraction of PAHs dissolved in the solution can be metabolized by microorganisms in soil. The amount of contaminant that can be readily taken up and degraded by microorganisms is defined as bioavailability (Bosma et al., 1997; Maier, 2000). Two phenomena have been suggested to cause the low bioavailability of PAHs in soil (Danielsson, 2000). The first one is strong adsorption of the contaminants to the soil constituents which then leads to very slow release rates of contaminants to the aqueous phase. Sorption is often well correlated with soil organic matter content (Means, 1980) and significantly reduces biodegradation (Manilal and Alexander, 1991). The second phenomenon is slow mass transfer of pollutants, such as pore diffusion in the soil aggregates or diffusion in the organic matter in the soil. The complex set of these physical, chemical and biological processes is schematically illustrated in Figure 1. As shown in Figure 1, biodegradation processes are taking place in the soil solution while diffusion processes occur in the narrow pores in and between soil aggregates (Danielsson, 2000). Seemingly contradictory studies can be found in the literature that indicate the rate and final extent of metabolism may be either lower or higher for sorbed PAHs by soil than those for pure PAHs (Van Loosdrecht et al., 1990). These contrasting results demonstrate that the bioavailability of organic contaminants sorbed onto soil is far from being well understood. Besides bioavailability, there are several other factors influencing the rate and extent of biodegradation of PAHs in soil including microbial population characteristics, physical and chemical properties of PAHs and environmental factors (temperature, moisture, pH, degree of contamination). Figure 1: Schematic diagram showing possible rate-limiting processes during bioremediation of hydrophobic organic contaminants in a contaminated soil-water system (not to scale) (Danielsson, 2000). 1.5 Increasing the bioavailability of PAH in soil Attempts to improve the biodegradation of PAHs in soil by increasing their bioavailability include the use of surfactants , solvents or solubility enhancers.. However, introduction of synthetic surfactant may result in the addition of one more pollutant. (Wang and Brusseau, 1993).A study conducted by Mulder et al. showed that the introduction of hydropropyl-ß-cyclodextrin (HPCD), a well-known PAH solubility enhancer, significantly increased the solubilization of PAHs although it did not improve the biodegradation rate of PAHs (Mulder et al., 1998), indicating that further research is required in order to develop a feasible and efficient remediation method. Enhancing the extent of PAHs mass transfer from the soil phase to the liquid might prove an efficient and environmentally low-risk alternative way of addressing the problem of slow PAH biodegradation in soil.

Carbon footprint, stato dell'arte ed applicazione pilota

Lo strumento in esame è il carbon footprint che ha lo scopo primario di calcolare l’impronta rilasciata in atmosfera dalle emissioni di gas ad effetto serra. Il carbon footprint è stato descritto ed esaminato in ogni suo aspetto pratico, strutturale e funzionale evidenziandone sia pregi da tenere in considerazione sia limiti da colmare anche attraverso il ventaglio di strumenti di misurazione ambientale che si hanno a disposizione. Il carbon footprint non verrà descritto unicamente come strumento di contabilità ambientale ma anche come mezzo di sensibilizzazione del pubblico o dei cittadini ai temi ambientali. Questo lavoro comprende un’indagine online degli strumenti di misura e rendicontazione delle emissioni di CO2 che sono sotto il nome di carbon footprint o carbon calculator. Nell’ultima parte della tesi si è applicato ad un caso reale tutto quello che è stato appreso dalla letteratura. Il lavoro è consistito nell’applicare lo strumento del carbon footprint ad un’azienda italiana di servizi seguendo la metodologia di calcolo prevista dalla norma ISO 14064. Di essa sono state contabilizzate le emissioni di CO2 generate dalle attività quotidiane e straordinarie sulle quali l’azienda ha un controllo diretto o comunque una responsabilità indiretta.