Advanced 4DT flight guidance and control software system

The work presented in this thesis has been part of a Cranfield University research project. This thesis aims to design a flight control law for large cargo aircraft by using predictive control, which can assure flight motion along the flight path exactly and on time. In particular this work involves the modelling of a Boeing C-17 Globemaster III 6DOF model (used as study case), by using DATCOM and Matlab Simulink software. Then a predictive control algorithm has been developed. The majority of the work is done in a Matlab/Simulink environment. Finally the predictive control algorithm has been applied on the aircraft model and its performances, in tracking given trajectory optimized through a 4DT Research Software, have been evaluated.

Design of compliant mechanisms and their application to morphing wing technology

This thesis describes a study conducted for the development of a new approach for the design of compliant mechanisms. Currently compliant mechanisms are based on a 2.5D design method. The applications for which compliant mechanisms can be used this way, is limited. The proposed research suggests to use a 3D approach for the design of CM’s, to better exploit its useful properties. To test the viability of this method, a practical application was chosen. The selected application is related to morphing wings. During this project a working prototype of a variable sweep and variable AoA system was designed and made for an SUAV. A compliant hinge allows the system to achieve two DOF. This hinge has been designed using the proposed 3D design approach. To validate the capabilities of the design, two methods were used. One of these methods was by simulation. By using analysis software, a basic idea could be provided of the stress and deformation of the designed mechanism. The second validation was done by means of AM. Using FDM and material jetting technologies, several prototypes were manufactured. The result of the first model showed that the DOF could be achieved. Models manufactured using material jetting technology, proved that the designed model could provide the desired motion and exploit the positive characteristics of CM. The system could be manufactured successfully in one part. Being able to produce the system in one part makes the need for an extensive assembly process redundant. This improves its structural quality. The materials chosen for the prototypes were PLA, VeroGray and Rigur. The material properties were suboptimal for its final purpose, but successful results were obtained. The prototypes proved tough and were able to provide the desired motion. This proves that the proposed design method can be a useful tool for the design of improved CM’s. Furthermore, the variable sweep & AoA system could be used to boost the flight performance of SUAV’s.

Design for uncertainty of aerospace structures

The aim of this work is to present a general overview of state-of-the-art related to design for uncertainty with a focus on aerospace structures. In particular, a simulation on a FCCZ lattice cell and on the profile shape of a nozzle will be performed. Optimization under uncertainty is characterized by the need to make decisions without complete knowledge of the problem data. When dealing with a complex problem, non-linearity, or optimization, two main issues are raised: the uncertainty of the feasibility of the solution and the uncertainty of the objective value of the function. In the first part, the Design Of Experiments (DOE) methodologies, Uncertainty Quantification (UQ), and then Uncertainty optimization will be deepened. The second part will show an application of the previous theories on through a commercial software. Nowadays multiobjective optimization on high non-linear problem can be a powerful tool to approach new concept solutions or to develop cutting-edge design. In this thesis an effective improvement have been reached on a rocket nozzle. Future work could include the introduction of multi scale modelling, multiphysics approach and every strategy useful to simulate as much possible real operative condition of the studied design.

GUI design for in-car message diagnosis

Electronics needs communication to serve the vehicular world, to let all ECUs to com- municate with each other are needed buses, each bus serves different stuffs and is able to communicate. In the evolution of automotive architecture, integration of multiple func- tionalities in a single ECU will be one of the key aspects. The analysis of in-vehicle data, both for diagnosis and study-case of a particular behaviour, is the basis for future’s technologies and applications. Starting from these ideas, the need of creating a correlation between the Vehicle state and the anomaly. In order to create a link among them, has been created an interface able to simplify the in-car diagnosis and creating a link among vehicle stateand anomaly, looking also to the study-case of the driver's behaviour.

Structural steel design with BIM technology - interventions on a three buildings block in Deruta (PG)

The aim of this thesis is to use the developments, advantages and applications of "Building Information Modelling" (BIM) with emphasis on the discipline of structural design for steel building located in Perugia. BIM was mainly considered as a new way of planning, constructing and operating buildings or infrastructures. It has been found to offer greater opportunities for increased efficiency, optimization of resources and generally better management throughout the life cycle of a facility. BIM increases the digitalization of processes and offers integrated and collaborative technologies for design, construction and operation. To understand BIM and its benefits, one must consider all phases of a project. Higher initial design costs often lead to lower construction and operation costs. Creating data-rich digital models helps to better predict and coordinate the construction phases and operation of a building. One of the main limitations identified in the implementation of BIM is the lack of knowledge and qualified professionals. Certain disciplines such as structural and mechanical design depend on whether the main contractor, owner, general contractor or architect need to use or apply BIM to their projects. The existence of a supporting or mandatory BIM guideline may then eventually lead to its adoption. To test the potential of the BIM adoption in the steel design process, some models were developed taking advantage of a largely diffuse authoring software (Autodesk Revit), to produce construction drawings and also material schedule that were needed in order to estimate quantities and features of a real steel building. Once the model has been built the whole process has been analyzed and then compared with the traditional design process of steel structure. Many relevant aspect in term of clearness and also in time spent were shown and lead to final conclusions about the benefits from BIM methodology.

Design e simulazione di un convertitore DC-DC per applicazioni automotive implementato mediante tecnologia GaN

L’obiettivo dell’elaborato è quello di presentare una soluzione di collegamento ed interfacciamento tra il supercondensatore (SC) dell’HESS (sistema ibrido di accumulo dell’energia situato all’interno di un veicolo elettrico) e il DC-link (bus che fornisce la potenza necessaria all’inverter che pilota il motore elettrico) attraverso un convertitore DC-DC ad alta efficienza che utilizzi tecnologie di potenza al nitruro di gallio (GaN). Il convertitore presentato è un convertitore DC-DC bidirezionale in configurazione Half-Bridge, esso dovrà funzionare in modalità Boost, ogni qualvolta il motore richieda energia extra dal SC, in modalità Buck per ricaricare il SC durante la frenata rigenerativa. In seguito ad un’introduzione ai veicoli elettrici, alla loro architettura e al perché il SC è così fondamentale, verrà presentata una breve introduzione ai convertitori di potenza (Capitolo 1). Si passerà poi alla presentazione delle tecnologie GaN mostrando come esse rappresentino il futuro dell’elettronica di potenza grazie ai loro numerosi vantaggi (Capitolo 2). Nel capitolo 3 si entrerà nel vivo della progettazione, è qui che sarà progettata ed implementata la soluzione proposta. Verrà effettuata una prima simulazione del circuito, tenendo conto degli effetti parassiti dei soli componenti, attraverso l’ausilio del software LTSpice. Il Capitolo 4 prevede una breve introduzione alle tecniche di layout, utili nella costruzione del circuito stampato presentata all’interno del medesimo capitolo. Il PCB sarà modellato mediante un secondo software denominato KiCAD. Infine, nel Capitolo 5, si procederà con la simulazione elettromagnetica del circuito stampato, essa permetterà di individuare gli effetti parassiti dovuti alle non idealità del layout e di mostrare l’effettiva differenza di efficienza tra un caso semi-ideale e un caso semi-reale.

BIM-FEM model interoperability for the design of a prestressed concrete bridge deck

In questa tesi ho analizzato il passaggio dall'ambiente BIM a quello FEM di un impalcato da ponte a travata precompressa, identificando criteri e applicando una metodologia che hanno consentito lo sviluppo di un modello FEM utilizzabile per l'analisi strutturale. Nella tesi si descrive l'opera e il suo dimensionamento, con l'analisi statica e le verifiche strutturali eseguite sia a mano sia sul modello in ambiente FEM importato dall'ambiente BIM. Oltre a ciò, viene modellata l'opera nella sua interezza ed inserita in un contesto reale. La tesi discute l'interoperabilità tra i due software evidenziando vantaggi (modello geometrico di partenza in ambiente FEM, trasferimento di informazioni inserite in ambiente BIM, riduzione dei tempi di modellazione e inserimento proprietà dei materiali e caratteristiche degli oggetti, inserimento armature di precompressione) e criticità (implementazione manuale di alcuni elementi nel modello geometrico, perdita di alcune informazioni, definizione di alcuni parametri, limitata interoperabilità FEM-BIM) della metodologia applicata.

Analysis and development of interface components and procedures for the design and commissioning toolchains in automation systems

The objective of the thesis project, developed within the Line Control & Software Engineering team of G.D company, is to analyze and identify the appropriate tool to automate the HW configuration process using Beckhoff technologies by importing data from an ECAD tool. This would save a great deal of time, since the I/O topology created as part of the electrical planning is presently imported manually in the related SW project of the machine. Moreover, a manual import is more error-prone because of human mistake than an automatic configuration tool. First, an introduction about TwinCAT 3, EtherCAT and Automation Interface is provided; then, it is analyzed the official Beckhoff tool, XCAD Interface, and the requirements on the electrical planning to use it: the interface is realized by means of the AutomationML format. Finally, due to some limitations observed, the design and implementation of a company internal tool is performed. Tests and validation of the tool are performed on a sample production line of the company.

La User Experience nel design di applicazioni Web - Il modulo diete Nutribook

In epoca contemporanea, la tecnologia ha subito una diffusione massiva e ha pervaso ogni ambito della vita dell’uomo, che sia esso scolastico, lavorativo, o ludico, cambiandone così radicalmente lo stile di vita sotto tutti i punti di vista. Sono infatti numerosissimi gli strumenti informatici che ad oggi supportano l'esercizio della maggior parte delle professioni, e che risultano peraltro ogni giorno più accurati e potenti: questo è il caso di Nutribook, un software gestionale in-cloud pensato per assistere i professionisti del mondo della nutrizione (Biologi Nutrizionisti, Dietologi, Dietisti) nelle attività quotidiane di visita dei pazienti e nell’organizzazione della propria agenda. Nell'ottica di poter offrire agli utenti un servizio sempre più esteso, il presente elaborato riporta il progetto di tesi svolto presso Deasoft s.r.l., azienda proprietaria di Nutribook, volto ad integrare tale software con un modulo dedicato all’attività di elaborazione di diete e piani alimentari. L'obiettivo principale del progetto presentato nell’elaborato risiede non solo nell'aspetto realizzativo del prodotto, ma anche nel tentativo di renderne la fruizione da parte dell'utente target il più possibile semplice, intuitiva e soddisfacente, mediante tecniche di potenziamento della User Experience. Il tirocinio per la redazione della presente tesi, nato a partire dall’esperienza di tirocinio curricolare, ha previsto come attività principali la conduzione di studi approfonditi in materia di User Experience, la partecipazione alla fase di analisi del dominio e dei requisiti e, infine, la collaborazione al design delle interfacce da realizzare mediante prototipi.

Analysis, Design, and Hardware-in-the-Loop Validation of Multi-Active Bridge Converters

This master's thesis investigates different aspects of Dual-Active-Bridge (DAB) Converter and extends aspects further to Multi-Active-Bridges (MAB). The thesis starts with an overview of the applications of the DAB and MAB and their importance. The analytical part of the thesis includes the derivation of the peak and RMS currents, which is required for finding the losses present in the system. The power converters, considered in this thesis are DAB, Triple-Active Bridge (TAB) and Quad-Active Bridge (QAB). All the theoretical calculations are compared with the simulation results from PLECS software for identifying the correctness of the reviewed and developed theory. The Hardware-in-the-Loop (HIL) simulation is conducted for checking the control operation in real-time with the help of the RT box from the Plexim. Additionally, as in real systems digital signal processor (DSP), system-on-chip or field programmable gate array is employed for the control of the power electronic systems, and the execution of the control in the real-time simulation (RTS) conducted is performed by DSP.

Fatigue Design Challenges of Transition Pieces from Decommissioned Platforms for Offshore Wind Energy

All structures are subjected to various loading conditions and combinations. For offshore structures, these loads include permanent loads, hydrostatic pressure, wave, current, and wind loads. Typically, sea environments in different geographical regions are characterized by the 100-year wave height, surface currents, and velocity speeds. The main problems associated with the commonly used, deterministic method is the fact that not all waves have the same period, and that the actual stochastic nature of the marine environment is not taken into account. Offshore steel structure fatigue design is done using the DNVGL-RP-0005:2016 standard which takes precedence over the DNV-RP-C203 standard (2012). Fatigue analysis is necessary for oil and gas producing offshore steel structures which were first constructed in the Gulf of Mexico North Sea (the 1930s) and later in the North Sea (1960s). Fatigue strength is commonly described by S-N curves which have been obtained by laboratory experiments. The rapid development of the Offshore wind industry has caused the exploration into deeper ocean areas and the adoption of new support structural concepts such as full lattice tower systems amongst others. The optimal design of offshore wind support structures including foundation, turbine towers, and transition piece components putting into consideration, economy, safety, and even the environment is a critical challenge. In this study, fatigue design challenges of transition pieces from decommissioned platforms for offshore wind energy are proposed to be discussed. The fatigue resistance of the material and structural components under uniaxial and multiaxial loading is introduced with the new fatigue design rules whilst considering the combination of global and local modeling using finite element analysis software programs.

Design and Implementation of Single phase 230V to Three Phase Inverter Based on the Embedded System STM-32 Applied to motor control

In the field of Power Electronics, several types of motor control systems have been developed using STM microcontroller and power boards. In both industrial power applications and domestic appliances, power electronic inverters are widely used. Inverters are used to control the torque, speed, and position of the rotor in AC motor drives. An inverter delivers constant-voltage and constant-frequency power in uninterruptible power sources. Because inverter power supplies have a high-power consumption and low transfer efficiency rate, a three-phase sine wave AC power supply was created using the embedded system STM32, which has low power consumption and efficient speed. It has the capacity of output frequency of 50 Hz and the RMS of line voltage. STM32 embedded based Inverter is a power supply that integrates, reduced, and optimized the power electronics application that require hardware system, software, and application solution, including power architecture, techniques, and tools, approaches capable of performance on devices and equipment. Power inverters are currently used and implemented in green energy power system with low energy system such as sensors or microcontroller to perform the operating function of motors and pumps. STM based power inverter is efficient, less cost and reliable. My thesis work was based on STM motor drives and control system which can be implemented in a gas analyser for operating the pumps and motors. It has been widely applied in various engineering sectors due to its ability to respond to adverse structural changes and improved structural reliability. The present research was designed to use STM Inverter board on low power MCU such as NUCLEO with some practical examples such as Blinking LED, and PWM. Then we have implemented a three phase Inverter model with Steval-IPM08B board, which converter single phase 230V AC input to three phase 380 V AC output, the output will be useful for operating the induction motor.

VRSDE: implementazione di tecnologie AR e VR all'interno dei processi di Car Design. Caso Studio: Maserati Gran Turismo

Con il seguente elaborato ci si è posti come oggetto di ricerca il valutare e mostrare come l’implementazione delle nuove tecnologie di realtà virtuale e aumentata possano portare un miglioramento al metodo di studio e lavoro dello Stylistic Design Engineering nello sviluppo di un concept design di un nuovo veicolo. Si illustreranno i cambiamenti apportati dall’utilizzo di un software di modellazione in realtà virtuale lungo tutto il processo di sviluppo, mettendo in evidenza la grande potenzialità di poter essere un forte strumento di condivisione e integrazione in ogni fase del progetto di tutte le figure professionali coinvolte nello sviluppo del prodotto.

Design di leggi di controllo per attività di Pick and Place con Robot Delta

Il seguente elaborato, frutto dell’attività di tirocinio presso il laboratorio del DIN di Montecuccolino, si prefigge di presentare un’architettura software contenente tutte le leggi di controllo necessarie allo svolgimento di un’attività di Pick and Place con un Robot Delta. L’elaborato si articola in una prima fase di analisi del Robot, una seconda fase di calibrazione del sistema in struttura e una terza fase di sviluppo del software di controllo con successiva validazione sperimentale dei risultati ottenuti.

Innovative layout design and radiated harmonic analysis for advanced frequency-diverse array solutions

Wireless power transfer is becoming a crucial and demanding task in the IoT world. Despite the already known solutions exploiting a near-field powering approach, far-field WPT is definitely more challenging, and commercial applications are not available yet. This thesis proposes the recent frequency-diverse array technology as a potential candidate for realizing smart and reconfigurable far-field WPT solutions. In the first section of this work, an analysis on some FDA systems is performed, identifying the planar array with circular geometry as the most promising layout in terms of radiation properties. Then, a novel energy aware solution to handle the critical time variability of the FDA beam pattern is proposed. It consists on a time-control strategy through a triangular pulse, and it allows to achieve ad-hoc and real time WPT. Moreover, an essential frequency domain analysis of the radiating behaviour of a pulsed FDA system is presented. This study highlights the benefits of exploiting the intrinsic pulse harmonics for powering purposes, thus minimising the power loss. Later, the electromagnetic design of a radial FDA architecture is addressed. In this context, an exhaustive investigation on miniaturization techniques is carried out; the use of multiple shorting pins together with a meandered feeding network has been selected as a powerful solution to halve the original prototype dimension. Finally, accurate simulations of the designed radial FDA system are performed, and the obtained results are given.