Scissione ossidativa di acido oleico catalizzata da nanoparticelle di oro supportate

Questo lavoro di tesi si occupa della sintesi, caratterizzazione e applicazione in catalisi di nanoparticelle d’oro (AuNPs) supportate su silice o allumina funzionalizzate con PPTEOS. L’attività catalitica di Au/OS@Yne (OS= SiO2, Al2O3), insieme a quella del catalizzatore commerciale AUROlite™ è investigata per la reazione di ossidazione dell’acido oleico (raw material) a prodotti a più alto valore aggiunto, come l’acido azelaico e l’acido pelargonico. Sono inoltre sintetizzati i catalizzatori Au/SiO2@Yne-TMS (modificato con trimetilsilossano) e Au/SiO2@Yne-NEt3 (modificato con trietilammina), per studiare sulla stessa reazione di ossidazione l’effetto dell’acidità del supporto di SiO2. Tutti i catalizzatori sintetizzati vengono caratterizzati per mezzo di diverse tecniche complementari quali la spettroscopia di assorbimento atomico (AAS), la microscopia a trasmissione elettronica (TEM), l’analisi termogravimetrica (TGA), la spettroscopia fotoelettronica a raggi X (XPS) in modo da determinarne le caratteristiche chimiche e strutturali quali il contenuto percentuale in peso di Au(0) e il diametro delle nanoparticelle. Inoltre, sono stati condotti preliminari studi di catalisi per la reazione di scissione ossidativa dell’acido oleico tramite nanomateriali basati su film di ossidi di manganese (MnO2 e Mn3O4) sintetizzati tramite Chemical Vapor Deposition (CVD). I vari test catalitici sono stati eseguiti al fine di ricercare un’alternativa sostenibile al processo industriale di ozonolisi dell’acido oleico sfruttando ossidanti organici come il tert-butilidroperossido e inorganici come l’H2O2. Per tutti i catalizzatori sono variate diverse condizioni di reazione, quali il solvente, la temperatura, i tempi di reazione e gli equivalenti di ossidante, focalizzandosi sull’ottimizzazione della reazione di scissione ossidativa. Infine è eseguito uno studio accurato sulla migliore metodologia per la caratterizzazione dei prodotti di reazione, attraverso analisi NMR, GC-MS e GPC.

Synthesis, Characterization, and Applications of a Novel Cu(II)-MOF Based on a Propargylcarbamate-Functionalized Isophthalate Ligand

This work describes the synthesis of a propargylcarbamate-functionalized isophthalate ligand and its use in the solvothermal preparation of a new copper(II)-based metal organic framework named [Cu(1,3-YBDC)]ˑxH2O (also abbreviated as Cu-MOF. The characterization of this compound was performed using several complementary techniques such as infrared (ATR-FTIR) and Raman spectroscopy, X-ray powder diffraction spectroscopy (PXRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), atomic absorption spectroscopy (AAS) as well as thermal and surface area measurements. Synchrotron X-ray diffraction analysis revealed that this MOF contains a complex network of 5-substituted isophthalate anions bound to Cu(II) centers, arranged in pairs within paddlewheel (or “Chinese lantern”) structure with a short Cu…Cu distance of 2.633 Å. Quite unexpectedly, the apical atom in the paddlewheel structure belongs to the carbamate carbonyl oxygen atom. Such extra coordination by the propargylcarbamate groups drastically reduces the MOF porosity, a feature that was also confirmed by BET measurements. Indeed, its surface area was determined to be low (14.5 ± 0.8 m2/g) as its total pore volume (46 mm3/g). Successively the Cu-MOF was treated with HAuCl4 with the aim of studying the ability of the propargylcarbamate functionality to capture the Au(III) ion and reduce it to Au(0) to give gold nanoparticles (AuNPs). The overall amount of gold retained by the Cu-MOF/Au was determined by AAS while the amount of gold and its oxidation state on the surface of the MOF was studied by XPS. A glassy carbon (GC) electrode was drop-casted with a Cu-MOF suspension to electrochemically characterize the material through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The performance of the modified electrodes towards nitrite oxidation was tested by CV and chronoamperometry.

Organic matter deposition/resuspension in a one-dimensional physical-biogeochemical model. A modelling study

The shallow water configuration of the gulf of Trieste allows the propagation of the stress due to wind and waves along the whole water column down to the bottom. When the stress overcomes a particular threshold it produces resuspension processes of the benthic detritus. The benthic sediments in the North Adriatic are rich of organic matter, transported here by many rivers. This biological active particulate, when remaining in the water, can be transported in all the Adriatic basin by the basin-wide circulation. In this work is presented a first implementation of a resuspension/deposition submodel in the oceanographic coupled physical-biogeochemical 1-dimensional numerical model POM-BFM. At first has been considered the only climatological wind stress forcing, next has been introduced, on the surface, an annual cycle of wave motion and finally have been imposed some exceptional wave event in different periods of the year. The results show a strong relationship between the efficiency of the resuspension process and the stratification of the water column. During summer the strong stratification can contained a great quantity of suspended matter near to the bottom, while during winter even a low concentration of particulate can reach the surface and remains into the water for several months without settling and influencing the biogeochemical system. Looking at the biologic effects, the organic particulate, injected in the water column, allow a sudden growth of the pelagic bacteria which competes with the phytoplankton for nutrients strongly inhibiting its growth. This happen especially during summer when the suspended benthic detritus concentration is greater.

Catalytic reduction of organic pollutants using supported metal nanoparticles

Metal nanoparticle catalysts have in the last decades been extensively researched for their enhanced performance compared to their bulk counterpart. Properties of nanoparticles can be controlled by modifying their size and shape as well as adding a support and stabilizing agent. In this study, preformed colloidal gold nanoparticles supported on activated carbon were tested on the reduction of 4-nitrophenol by NaBH4, a model reaction for evaluating catalytic activity of metal nanoparticles and one with high significance in the remediation of industrial wastewaters. Methods of wastewater remediation are reviewed, with case studies from literature on two major reactions, ozonation and reduction, displaying the synergistic effects observed with bimetallic and trimetallic catalysts, as well as the effects of differences in metal and support. Several methods of preparation of nanoparticles are discussed, in particular, the sol immobilization technique, which was used to prepare the supported nanoparticles in this study. Different characterization techniques used in this study to evaluate the materials and spectroscopic techniques to analyze catalytic activities of the catalyst are reviewed: ultraviolet-visible (UV-Vis) spectroscopy, dynamic light scattering (DLS) analysis, X-ray diffraction (XRD) analysis and transmission electron microscopy (TEM) imaging. Optimization of catalytic parameters was carried out through modifications in the reaction setup. The effects of the molar ratio of reactants, stirring, type and amount of stabilizing agent are explored. Another important factor of an effective catalyst is its reusability and long-term stability, which was examined with suggestions for further studies. Lastly, a biochar support was newly tested for its potential as a replacement for activated carbon.