Environmental impact assessment of the School of Engineering and Architecture (Lazzaretto) - A pathway towards LEED certification

The current work has for object the improvement and the maintenance of the School of Engineering and Architecture in Via Terracini 28 (Bologna), with the prospective to maximize the operative efficiency reducing to the minimum the environmental impact and the costs. In order to realize this work the LEED certification has been used. LEED (Leadership in Energy and Environmental Design) is a certification system of the buildings. It was born in United States by the U.S. Green Building Council (USGBC)

Outdoor production of Isochrysis galbana (T-iso) in industrial scale photobioreactors and modelling of its photosynthesis and respiration rate

Isochrysis galbana is a widely-used strain in aquaculture in spite of its low productivity. To maximize the productivity of processes based on this microalgae strain, a model was developed considering the influence of irradiance, temperature, pH and dissolved oxygen concentration on the photosynthesis and respiration rate. Results demonstrate that this strain tolerates temperatures up to 35ºC but it is highly sensitive to irradiances higher than 500 µE·m-2·s-1 and dissolved oxygen concentrations higher than 11 mg·l-1. With the researcher group of the “Universidad de Almeria”, the developed model was validated using data from an industrial-scale outdoor tubular photobioreactor demonstrating that inadequate temperature and dissolved oxygen concentrations reduce productivity to half that which is maximal, according to light availability under real outdoor conditions. The developed model is a useful tool for managing working processes, especially in the development of new processes based on this strain and to take decisions regarding optimal control strategies. Also the outdoor production of Isochrysis galbana T-iso in industrial size tubular photobioreactors (3.0 m3) has been studied. Experiments were performed modifying the dilution rate and evaluating the biomass productivity and quality, in addition to the overall performance of the system. Results confirmed that T-iso can be produced outdoor at commercial scale in continuous mode, productivities up to 20 g·m-2·day-1 of biomass rich in proteins (45%) and lipids (25%) being obtained. The utilization of this type of photobioreactors allows controlling the contamination and pH of the cultures, but daily variation of solar radiation imposes the existence of inadequate dissolved oxygen concentration and temperature at which the cells are exposed to inside the reactor. Excessive dissolved oxygen reduced the biomass productivity to 68% of maximal, whereas inadequate temperature reduces to 63% of maximal. Thus, optimally controlling these parameters the biomass productivity can be duplicated. These results confirm the potential to produce this valuable strain at commercial scale in optimally designed/operated tubular photobioreactors as a biotechnological industry.

Night Vision Imaging System (NVIS) certification requirements analysis of an Airbus Helicopters H135

The safe operation of nighttime flight missions would be enhanced using Night Vision Imaging Systems (NVIS) equipment. This has been clear to the military since 1970s and to the civil helicopters since 1990s. In these last months, even Italian Emergency Medical Service (EMS) operators require Night Vision Goggles (NVG) devices that therefore amplify the ambient light. In order to fly with this technology, helicopters have to be NVIS-approved. The author have supported a company, to quantify the potentiality of undertaking the certification activity, through a feasibility study. Even before, NVG description and working principles have been done, then specifications analysis about the processes to make a helicopter NVIS-approved has been addressed. The noteworthy difference between military specifications and the civilian ones highlights non-irrevelant lacks in the latter. The activity of NVIS certification could be a good investment because the following targets have been achieved: Reductions of the certification cost, of the operating time and of the number of non-compliance.

Consapevolezza e qualità in process: applicazine della UNI ISO/TS 16949:2009 nel reparto produttivo di pressatura in Sinteris Spa

Lo studio nasce dalla necessità di verificare l’applicazione di alcuni punti della ISO/TS 16949:2009 nel reparto di pressatura dell’azienda. Era importante valutare il livello di consapevolezza dei dipendenti relativamente al problema qualità in un’azienda automotive. Perciò, a partire dalla normativa, è stata fatta un’Indagine di Consapevolezza tra tutti i dipendenti il cui lavoro ha influenza sulla qualità del processo produttivo e del prodotto realizzato. Inoltre, serviva controllare se la logistica del reparto di pressatura fosse adeguata per permettere agli operatori di svolgere al meglio l’ autocontrollo, ossia un controllo in process delle quote geometriche e dimensionali durante la produzione di serie. È stata verificata l’adeguatezza delle unità di carico per la movimentazione dei prodotti, sia a livello logistico che di carico di lavoro per chi le deve movimentare. È risultato che le UdC attualmente in uso, ossia carrelli mossi manualmente, non possono essere sostituite, ma le si può rendere più maneggevoli cambiandone le ruote. Si è studiato il carico di lavoro del reparto di pressatura, per valutare se fosse possibile introdurre misure che diano la possibilità agli operatori di reparto di svolgere i controlli in process con più accuratezza, ipotizzando l’introduzione di una figura specifica, l’Operatore dell’Autocontrollo, che possa occuparsi solo di questo incarico, sollevando gli altri operatori da tale incombenza. Infine, ci si è posti il problema di ridurre l’utilizzo dei carrelli elevatori all’interno del reparto. È risultato necessario mantenerne l’uso per poter garantire la grande flessibilità nella produzione di quest’azienda, ma si è ipotizzato di separare il reparto in due diverse zone al momento del rinnovo del parco macchine, in modo da eliminarne l’utilizzo in una delle due zone e concentrarlo nell’altra, rendendoli indispensabili solo per un determinato tipo di produzione che si svolga in un settore ben definito del reparto.