Modeling, Component Selection and Optimization of Servo-controlled Automatic Machinery

A servo-controlled automatic machine can perform tasks that involve synchronized actuation of a significant number of servo-axes, namely one degree-of-freedom (DoF) electromechanical actuators. Each servo-axis comprises a servo-motor, a mechanical transmission and an end-effector, and is responsible for generating the desired motion profile and providing the power required to achieve the overall task. The design of a such a machine must involve a detailed study from a mechatronic viewpoint, due to its electric and mechanical nature. The first objective of this thesis is the development of an overarching electromechanical model for a servo-axis. Every loss source is taken into account, be it mechanical or electrical. The mechanical transmission is modeled by means of a sequence of lumped-parameter blocks. The electric model of the motor and the inverter takes into account winding losses, iron losses and controller switching losses. No experimental characterizations are needed to implement the electric model, since the parameters are inferred from the data available in commercial catalogs. With the global model at disposal, a second objective of this work is to perform the optimization analysis, in particular, the selection of the motor-reducer unit. The optimal transmission ratios that minimize several objective functions are found. An optimization process is carried out and repeated for each candidate motor. Then, we present a novel method where the discrete set of available motor is extended to a continuous domain, by fitting manufacturer data. The problem becomes a two-dimensional nonlinear optimization subject to nonlinear constraints, and the solution gives the optimal choice for the motor-reducer system. The presented electromechanical model, along with the implementation of optimization algorithms, forms a complete and powerful simulation tool for servo-controlled automatic machines. The tool allows for determining a wide range of electric and mechanical parameters and the behavior of the system in different operating conditions.

Asset management of wastewater networks

Asset Management (AM) is a set of procedures operable at the strategic-tacticaloperational level, for the management of the physical asset���s performance, associated risks and costs within its whole life-cycle. AM combines the engineering, managerial and informatics points of view. In addition to internal drivers, AM is driven by the demands of customers (social pull) and regulators (environmental mandates and economic considerations). AM can follow either a top-down or a bottom-up approach. Considering rehabilitation planning at the bottom-up level, the main issue would be to rehabilitate the right pipe at the right time with the right technique. Finding the right pipe may be possible and practicable, but determining the timeliness of the rehabilitation and the choice of the techniques adopted to rehabilitate is a bit abstruse. It is a truism that rehabilitating an asset too early is unwise, just as doing it late may have entailed extra expenses en route, in addition to the cost of the exercise of rehabilitation per se. One is confronted with a typical ���Hamlet-isque dilemma��� ��� ���to repair or not to repair���; or put in another way, ���to replace or not to replace���. The decision in this case is governed by three factors, not necessarily interrelated ��� quality of customer service, costs and budget in the life cycle of the asset in question. The goal of replacement planning is to find the juncture in the asset���s life cycle where the cost of replacement is balanced by the rising maintenance costs and the declining level of service. System maintenance aims at improving performance and maintaining the asset in good working condition for as long as possible. Effective planning is used to target maintenance activities to meet these goals and minimize costly exigencies. The main objective of this dissertation is to develop a process-model for asset replacement planning. The aim of the model is to determine the optimal pipe replacement year by comparing, temporally, the annual operating and maintenance costs of the existing asset and the annuity of the investment in a new equivalent pipe, at the best market price. It is proposed that risk cost provide an appropriate framework to decide the balance between investment for replacing or operational expenditures for maintaining an asset. The model describes a practical approach to estimate when an asset should be replaced. A comprehensive list of criteria to be considered is outlined, the main criteria being a vis��- vis between maintenance and replacement expenditures. The costs to maintain the assets should be described by a cost function related to the asset type, the risks to the safety of people and property owing to declining condition of asset, and the predicted frequency of failures. The cost functions reflect the condition of the existing asset at the time the decision to maintain or replace is taken: age, level of deterioration, risk of failure. The process model is applied in the wastewater network of Oslo, the capital city of Norway, and uses available real-world information to forecast life-cycle costs of maintenance and rehabilitation strategies and support infrastructure management decisions. The case study provides an insight into the various definitions of ���asset lifetime��� ��� service life, economic life and physical life. The results recommend that one common value for lifetime should not be applied to the all the pipelines in the stock for investment planning in the long-term period; rather it would be wiser to define different values for different cohorts of pipelines to reduce the uncertainties associated with generalisations for simplification. It is envisaged that more criteria the municipality is able to include, to estimate maintenance costs for the existing assets, the more precise will the estimation of the expected service life be. The ability to include social costs enables to compute the asset life, not only based on its physical characterisation, but also on the sensitivity of network areas to social impact of failures. The type of economic analysis is very sensitive to model parameters that are difficult to determine accurately. The main value of this approach is the effort to demonstrate that it is possible to include, in decision-making, factors as the cost of the risk associated with a decline in level of performance, the level of this deterioration and the asset���s depreciation rate, without looking at age as the sole criterion for making decisions regarding replacements.

Scenari finanziari e portafogli ottimi: modelli di previsione e strategie per l'asset allocation tattica

Le scelte di asset allocation costituiscono un problema ricorrente per ogni investitore. Quest���ultimo �� continuamente impegnato a combinare diverse asset class per giungere ad un investimento coerente con le proprie preferenze. L���esigenza di supportare gli asset manager nello svolgimento delle proprie mansioni ha alimentato nel tempo una vasta letteratura che ha proposto numerose strategie e modelli di portfolio construction. Questa tesi tenta di fornire una rassegna di alcuni modelli innovativi di previsione e di alcune strategie nell���ambito dell���asset allocation tattica, per poi valutarne i risvolti pratici. In primis verificheremo la sussistenza di eventuali relazioni tra la dinamica di alcune variabili macroeconomiche ed i mercati finanziari. Lo scopo �� quello di individuare un modello econometrico capace di orientare le strategie dei gestori nella costruzione dei propri portafogli di investimento. L���analisi prende in considerazione il mercato americano, durante un periodo caratterizzato da rapide trasformazioni economiche e da un���elevata volatilit�� dei prezzi azionari. In secondo luogo verr�� esaminata la validit�� delle strategie di trading momentum e contrarian nei mercati futures, in particolare quelli dell���Eurozona, che ben si prestano all���implementazione delle stesse, grazie all���assenza di vincoli sulle operazioni di shorting ed ai ridotti costi di transazione. Dall���indagine emerge che entrambe le anomalie si presentano con carattere di stabilit��. I rendimenti anomali permangono anche qualora vengano utilizzati i tradizionali modelli di asset pricing, quali il CAPM, il modello di Fama e French e quello di Carhart. Infine, utilizzando l���approccio EGARCH-M, verranno formulate previsioni sulla volatilit�� dei rendimenti dei titoli appartenenti al Dow Jones. Quest���ultime saranno poi utilizzate come input per determinare le views da inserire nel modello di Black e Litterman. I risultati ottenuti, evidenziano, per diversi valori dello scalare tau, extra rendimenti medi del new combined vector superiori al vettore degli extra rendimenti di equilibrio di mercato, seppur con livelli pi�� elevati di rischio.

Essays on asset pricing

The first chapter provides evidence that aggregate Research and Development (R&D) investment drives a persistent component in productivity growth and that this embodies a risk priced in financial markets. In a semi-endogenous growth model, this component is identified by the R&D in excess of equilibrium levels and can be approximated by the Error Correction Term in the cointegration between R&D and Total Factor Productivity. Empirically, the component results being well defined and it satisfies all key theoretical predictions: it exhibits appropriate persistency, it forecasts productivity growth, and it is associated with a cross-sectional risk premium. CAPM is the most foundational model in financial economics, but is known to empirically underestimate expected returns of low-risk assets and overestimate those with high risk. The second chapter studies how risks omission and funding tightness jointly contribute to explaining this anomaly, with the former affecting the definition of assets��� riskiness and the latter affecting how risk is remunerated. Theoretically, the two effects are shown to counteract each other. Empirically, the spread related to binding leverage constraints is found to be significant at 2% yearly. Nonetheless, average returns of portfolios that exploit this anomaly are found to mostly reflect omitted risks, in contrast to their employment in previous literature. The third chapter studies how ���sustainability��� of assets affect discount rates, which is intrinsically mediated by the risk profile of the assets themselves. This has implications for the assessment of the sustainability-related spread and for hedging changes in the sustainability concern. This mechanism is tested on the ESG-score dimension for US data, with inconclusive evidence regarding the existence of an ESG-related premium in the first place. Also, the risk profile of the long-short ESG portfolio is not likely to impact the sign of its average returns with respect to the sustainability-spread, for the time being.

Diencephalic asymmetries: morphological, immunohistochemical and ultrastructural analysis of habenular nuclei in elasmobranchs and teleosts

The habenular nuclei are diencephalic structures present in Vertebrates and they form, with the associated fiber systems, a part of the system that connects the telencephalon to the ventral mesencephalon (Concha M. L. and Wilson S. W., 2001). In representative species of almost all classes of Vertebrates the habenular nuclei are asymmetric, both in terms of size and of neuronal and neurochemical organization, although different types of asymmetry follow different evolutionary courses. Previous studies have analyzed the spread and diversity of the asymmetry in species for which data are not clear (Kemali M. et al., 1980). Notwithstanding that, it���s still not totally understood the evolution of the phenomenon, and the ontogenetic mechanisms that have led to the habenular asymmetry development are not clear (Smeets W.J. et al., 1983). For the present study 14 species of Elasmobranchs and 15 species of Teleostean have been used. Brains removed from the animals have been fixed using 4% paraformaldehyde in phosphate buffer; brains have been analyzed with different tecniques, and I used histological, immunohistochemical and ultrastructural analysis to describe this asymmetry. My results confirm data previously obtained studying other Elasmobranchs species, in which the left habenula is larger than the right one; the Teleostean show some slightly differences regarding the size of the habenular ganglia, in some species, in which the left habenular nucleus is larger than the right. In the course of studies, a correlation between the habits of life and the diencephalic asymmetry seems to emerge: among the Teleostean analyzed, the species with benthic life (like Lepidorhombus boscii, Platichthys flesus, Solea vulgaris) seem to possess a slight asymmetry, analogous to the one of the Elasmobranchs, while in the other species (like Liza aurata, Anguilla anguilla, Trisopterus minutus) the habenulae are symmetrical. However, various aspects of the neuroanatomical asymmetries of the epithalamus have not been deepened in order to obtain a complete picture of the evolution of this phenomenon, and new searches are needed to examine the species without clear asymmetry, in order to understand the spread and the diversity of the asymmetry among the habenulae between the Vertebrates.

Evaluation of bone strength: microtomographic tecniques

This thesis is a part of a larger study about the characterization of mechanical and histomorphometrical properties of bone. The main objects of this study were the bone tissue properties and its resistance to mechanical loads. Moreover, the knowledge about the equipment selected to carry out the analyses, the micro-computed tomography (micro-CT), was improved. Particular attention was given to the reliability over time of the measuring instrument. In order to understand the main characteristics of bone mechanical properties a study of the skeletal, the bones of which it is composed and biological principles that drive their formation and remodelling, was necessary. This study has led to the definition of two macro-classes describing the main components responsible for the resistance to fracture of bone: quantity and quality of bone. The study of bone quantity is the current clinical standard measure for so-called bone densitometry, and research studies have amply demonstrated that the amount of tissue is correlated with its mechanical properties of elasticity and fracture. However, the models presented in the literature, including information on the mere quantity of tissue, have often been limited in describing the mechanical behaviour. Recent investigations have underlined that also the bone-structure and the tissue-mineralization play an important role in the mechanical characterization of bone tissue. For this reason in this thesis the class defined as bone quality was mainly studied, splitting it into two sub-classes of bone structure and tissue quality. A study on bone structure was designed to identify which structural parameters, among the several presented in the literature, could be integrated with the information about quantity, in order to better describe the mechanical properties of bone. In this way, it was also possible to analyse the iteration between structure and function. It has been known for long that bone tissue is capable of remodeling and changing its internal structure according to loads, but the dynamics of these changes are still being analysed. This part of the study was aimed to identify the parameters that could quantify the structural changes of bone tissue during the development of a given disease: osteoarthritis. A study on tissue quality would have to be divided into different classes, which would require a scale of analysis not suitable for the micro-CT. For this reason the study was focused only on the mineralization of the tissue, highlighting the difference between bone density and tissue density, working in a context where there is still an ongoing scientific debate.

Expression and cellular localization of Copper transporter 2 (Ctr2) in Mus musculus

The Ctr family is an essential part of the copper homeostasis machinery and its members share sequence homology and structural and functional features. Higher eukaryotes express two members of this family Ctr1 and Ctr2. Numerous structural and functional studies are available for Ctr1, the only high affinity Cu(I) transporter thus far identified. Ctr1 holigotrimers mediate cellular copper uptake and this protein was demonstrated to be essential for embryonic development and to play a crucial role in dietary copper acquisition. Instead very little is known about Ctr2, it bears structural homology to the yeast vacuolar copper transporter, which mediates mobilization of vacuolar copper stores. Recent studies using over-expressed epitope-tagged forms of human Ctr2 suggested a function as a low affinity copper transporter that can mediate either copper uptake from the extracellular environment or mobilization of lysosomal copper stores. Using an antibody that recognizes endogenous mouse Ctr2, we studied the expression and localization of endogenous mouse Ctr2 in cell culture and in mouse models to understand its regulation and function in copper homeostasis. By immunoblot we observed a regulation of mCtr2 protein levels in a copper and Ctr1 dependent way. Our observations in cells and transgenic mice suggest that lack of Ctr1 induces a strong downregulation of Ctr2 probably by a post-translational mechanism. By indirect immunofluorescence we observed an exclusive intracellular localization in a perinuclear compartment and no co-localization with lysosomal markers. Immunofluorescence experiments in Ctr1 null cells, supported by sequence analysis, suggest that lysosomes may play a role in mCtr2 biology not as resident compartment, but as a degradation site. In appendix a LC-mass method for analysis of algal biotoxins belonging to the family of PsP (paralytic shellfish poisoning) is described.

Securitization and Special Purpose Vehicles in an International Setting: a Systemic View

The present work tries to display a comprehensive and comparative study of the different legal and regulatory problems involved in international securitization transactions. First, an introduction to securitization is provided, with the basic elements of the transaction, followed by the different varieties of it, including dynamic securitization and synthetic securitization structures. Together with this introduction to the intricacies of the structure, a insight into the influence of securitization in the financial and economic crisis of 2007-2009 is provided too; as well as an overview of the process of regulatory competition and cooperation that constitutes the framework for the international aspects of securitization. The next Chapter focuses on the aspects that constitute the foundations of structured finance: the inception of the vehicle, and the transfer of risks associated to the securitized assets, with particular emphasis on the validity of those elements, and how a securitization transaction could be threatened at its root. In this sense, special importance is given to the validity of the trust as an instrument of finance, to the assignment of future receivables or receivables in block, and to the importance of formalities for the validity of corporations, trusts, assignments, etc., and the interaction of such formalities contained in general corporate, trust and assignment law with those contemplated under specific securitization regulations. Then, the next Chapter (III) focuses on creditor protection aspects. As such, we provide some insights on the debate on the capital structure of the firm, and its inadequacy to assess the financial soundness problems inherent to securitization. Then, we proceed to analyze the importance of rules on creditor protection in the context of securitization. The corollary is in the rules in case of insolvency. In this sense, we divide the cases where a party involved in the transaction goes bankrupt, from those where the transaction itself collapses. Finally, we focus on the scenario where a substance over form analysis may compromise some of the elements of the structure (notably the limited liability of the sponsor, and/or the transfer of assets) by means of veil piercing, substantive consolidation, or recharacterization theories. Once these elements have been covered, the next Chapters focus on the regulatory aspects involved in the transaction. Chapter IV is more referred to ���market��� regulations, i.e. those concerned with information disclosure and other rules (appointment of the indenture trustee, and elaboration of a rating by a rating agency) concerning the offering of asset-backed securities to the public. Chapter V, on the other hand, focuses on ���prudential��� regulation of the entity entrusted with securitizing assets (the so-called Special Purpose vehicle), and other entities involved in the process. Regarding the SPV, a reference is made to licensing requirements, restriction of activities and governance structures to prevent abuses. Regarding the sponsor of the transaction, a focus is made on provisions on sound originating practices, and the servicing function. Finally, we study accounting and banking regulations, including the Basel I and Basel II Frameworks, which determine the consolidation of the SPV, and the de-recognition of the securitized asset from the originating company���s balance-sheet, as well as the posterior treatment of those assets, in particular by banks. Chapters VI-IX are concerned with liability matters. Chapter VI is an introduction to the different sources of liability. Chapter VII focuses on the liability by the SPV and its management for the information supplied to investors, the management of the asset pool, and the breach of loyalty (or fiduciary) duties. Chapter VIII rather refers to the liability of the originator as a result of such information and statements, but also as a result of inadequate and reckless originating or servicing practices. Chapter IX finally focuses on third parties entrusted with the soundness of the transaction towards the market, the so-called gatekeepers. In this respect, we make special emphasis on the liability of indenture trustees, underwriters and rating agencies. Chapters X and XI focus on the international aspects of securitization. Chapter X contains a conflicts of laws analysis of the different aspects of structured finance. In this respect, a study is made of the laws applicable to the vehicle, to the transfer of risks (either by assignment or by means of derivatives contracts), to liability issues; and a study is also made of the competent jurisdiction (and applicable law) in bankruptcy cases; as well as in cases where a substance-over-form is performed. Then, special attention is also devoted to the role of financial and securities regulations; as well as to their territorial limits, and extraterritoriality problems involved. Chapter XI supplements the prior Chapter, for it analyzes the limits to the States��� exercise of regulatory power by the personal and ���market��� freedoms included in the US Constitution or the EU Treaties. A reference is also made to the (still insufficient) rules from the WTO Framework, and their significance to the States��� recognition and regulation of securitization transactions.

Genomic and transcriptional analysis of allergen genes in apple (Malus x domestica)

Apple consumption is highly recomended for a healthy diet and is the most important fruit produced in temperate climate regions. Unfortunately, it is also one of the fruit that most ofthen provoks allergy in atopic patients and the only treatment available up to date for these apple allergic patients is the avoidance. Apple allergy is due to the presence of four major classes of allergens: Mal d 1 (PR-10/Bet v 1-like proteins), Mal d 2 (Thaumatine-like proteins), Mal d 3 (Lipid transfer protein) and Mal d 4 (profilin). In this work new advances in the characterization of apple allergen gene families have been reached using a multidisciplinary approach. First of all, a genomic approach was used for the characterization of the allergen gene families of Mal d 1 (task of Chapter 1), Mal d 2 and Mal d 4 (task of Chapter 5). In particular, in Chapter 1 the study of two large contiguos blocks of DNA sequences containing the Mal d 1 gene cluster on LG16 allowed to acquire many new findings on number and orientation of genes in the cluster, their physical distances, their regulatory sequences and the presence of other genes or pseudogenes in this genomic region. Three new members were discovered co-localizing with the other Mal d 1 genes of LG16 suggesting that the complexity of the genetic base of allergenicity will increase with new advances. Many retrotranspon elements were also retrieved in this cluster. Due to the developement of molecular markers on the two sequences, the anchoring of the physical and the genetic map of the region has been successfully achieved. Moreover, in Chapter 5 the existence of other loci for the Thaumatine-like protein family in apple (Mal d 2.03 on LG4 and Mal d 2.02 on LG17) respect the one reported up to now was demonstred for the first time. Also one new locus for profilins (Mal d 4.04) was mapped on LG2, close to the Mal d 4.02 locus, suggesting a cluster organization for this gene family, as is well reported for Mal d 1 family. Secondly, a methodological approach was used to set up an highly specific tool to discriminate and quantify the expression of each Mal d 1 allergen gene (task of Chapter 2). In aprticular, a set of 20 Mal d 1 gene specific primer pairs for the quantitative Real time PCR technique was validated and optimized. As a first application, this tool was used on leaves and fruit tissues of the cultivar Florina in order to identify the Mal d 1 allergen genes that are expressed in different tissues. The differential expression retrieved in this study revealed a tissue-specificity for some Mal d 1 genes: 10/20 Mal d 1 genes were expressed in fruits and, indeed, probably more involved in the allergic reactions; while 17/20 Mal d 1 genes were expressed in leaves challenged with the fungus Venturia inaequalis and therefore probably interesting in the study of the plant defense mechanism. In Chapter 3 the specific expression levels of the 10 Mal d 1 isoallergen genes, found to be expressed in fruits, were studied for the first time in skin and flesh of apples of different genotypes. A complex gene expression profile was obtained due to the high gene-, tissue- and genotype-variability. Despite this, Mal d 1.06A and Mal d 1.07 expression patterns resulted particularly associated with the degree of allergenicity of the different cultivars. They were not the most expressed Mal d 1 genes in apple but here it was hypotized a relevant importance in the determination of allergenicity for both qualitative and quantitative aspects of the Mal d 1 gene expression levels. In Chapter 4 a clear modulation for all the 17 PR-10 genes tested in young leaves of Florina after challenging with the fungus V. inaequalis have been reported but with a peculiar expression profile for each gene. Interestingly, all the Mal d 1 genes resulted up-regulated except Mal d 1.10 that was down-regulated after the challenging with the fungus. The differences in direction, timing and magnitude of induction seem to confirm the hypothesis of a subfunctionalization inside the gene family despite an high sequencce and structure similarity. Moreover, a modulation of PR-10 genes was showed both in compatible (Gala-V. inaequalis) and incompatible (Florina-V. inaequalis) interactions contribute to validate the hypothesis of an indirect role for at least some of these proteins in the induced defense responses. Finally, a certain modulation of PR-10 transcripts retrieved also in leaves treated with water confirm their abilty to respond also to abiotic stress. To conclude, the genomic approach used here allowed to create a comprehensive inventory of all the genes of allergen families, especially in the case of extended gene families like Mal d 1. This knowledge can be considered a basal prerequisite for many further studies. On the other hand, the specific transcriptional approach make it possible to evaluate the Mal d 1 genes behavior on different samples and conditions and therefore, to speculate on their involvement on apple allergenicity process. Considering the double nature of Mal d 1 proteins, as apple allergens and as PR-10 proteins, the gene expression analysis upon the attack of the fungus created the base for unravel the Mal d 1 biological functions. In particular, the knowledge acquired in this work about the PR-10 genes putatively more involved in the specific Malus-V. inaequalis interaction will be helpful, in the future, to drive the apple breeding for hypo-allergenicity genotype without compromise the mechanism of response of the plants to stress conditions. For the future, the survey of the differences in allergenicity among cultivars has to be be thorough including other genotypes and allergic patients in the tests. After this, the allelic diversity analysis with the high and low allergenic cultivars on all the allergen genes, in particular on the ones with transcription levels correlated to allergencity, will provide the genetic background of the low ones. This step from genes to alleles will allow the develop of molecular markers for them that might be used to effectively addressed the apple breeding for hypo-allergenicity. Another important step forward for the study of apple allergens will be the use of a specific proteomic approach since apple allergy is a multifactor-determined disease and only an interdisciplinary and integrated approach can be effective for its prevention and treatment.

Use of solvents and environmental friendly materials for applications in Green Chemistry

The present Thesis studies three alternative solvent groups as sustainable replacement of traditional organic solvents. Some aspects of fluorinated solvents, supercritical fluids and ionic liquids, have been analysed with a critical approach and their effective ���greenness��� has been evaluated from the points of view of the synthesis, the properties and the applications. In particular, the attention has been put on the environmental and human health issues, evaluating the eco-toxicity, the toxicity and the persistence, to underline that applicability and sustainability are subjects with equal importance. The ���green��� features of fluorous solvents and supercritical fluids are almost well-established; in particular supercritical carbon dioxide (scCO2) is probably the ���greenest��� solvent among the alternative solvent systems developed in the last years, enabling to combine numerous advantages both from the point of view of industrial/technological applications and eco-compatibility. In the Thesis the analysis of these two classes of alternative solvents has been mainly focused on their applicability, rather than the evaluation of their environmental impact. Specifically they have been evaluated as alternative media for non-aqueous biocatalysis. For this purpose, the hydrophobic ion pairing (HIP), which allows solubilising enzymes in apolar solvents by an ion pairing between the protein and a surfactant, has been investigated as effective enzymatic derivatisation technique to improve the catalytic activity under homogeneous conditions in non conventional media. The results showed that the complex enzyme-surfactant was much more active both in fluorous solvents and in supercritical carbon dioxide than the native form of the enzyme. Ionic liquids, especially imidazolium salts, have been proposed some years ago as ���fully green��� alternative solvents; however this epithet does not take into account several ���brown��� aspects such as their synthesis from petro-chemical starting materials, their considerable eco-toxicity, toxicity and resistance to biodegradation, and the difficulty of clearly outline applications in which ionic liquids are really more advantageous than traditional solvents. For all of these reasons in this Thesis a critical analysis of ionic liquids has been focused on three main topics: i) alternative synthesis by introducing structural moieties which could reduce the toxicity of the most known liquid salts, and by using starting materials from renewable resources; ii) on the evaluation of their environmental impact through eco-toxicological tests (Daphnia magna and Vibrio fischeri acute toxicity tests, and algal growth inhibition), toxicity tests (MTT test, AChE inhibition and LDH release tests) and fate and rate of aerobic biodegradation in soil and water; iii) and on the demonstration of their effectiveness as reaction media in organo-catalysis and as extractive solvents in the recovery of vegetable oil from terrestrial and aquatic biomass. The results about eco-toxicity tests with Daphnia magna, Vibrio fischeri and algae, and toxicity assay using cultured cell lines, clearly indicate that the difference in toxicity between alkyl and oxygenated cations relies in differences of polarity, according to the general trend of decreasing toxicity by decreasing the lipophilicity. Independently by the biological approach in fact, all the results are in agreement, showing a lower toxicity for compounds with oxygenated lateral chains than for those having purely alkyl lateral chains. These findings indicate that an appropriate choice of cation and anion structures is important not only to design the IL with improved and suitable chemico-physical properties but also to obtain safer and eco-friendly ILs. Moreover there is a clear indication that the composition of the abiotic environment has to be taken into account when the toxicity of ILs in various biological test systems is analysed, because, for example, the data reported in the Thesis indicate a significant influence of salinity variations on algal toxicity. Aerobic biodegradation of four imidazolium ionic liquids, two alkylated and two oxygenated, in soil was evaluated for the first time. Alkyl ionic liquids were shown to be biodegradable over the 6 months test period, and in contrast no significant mineralisation was observed with oxygenated derivatives. A different result was observed in the aerobic biodegradation of alkylated and oxygenated pyridinium ionic liquids in water because all the ionic liquids were almost completely degraded after 10 days, independently by the number of oxygen in the lateral chain of the cation. The synthesis of new ionic liquids by using renewable feedstock as starting materials, has been developed through the synthesis of furan-based ion pairs from furfural. The new ammonium salts were synthesised in very good yields, good purity of the products and wide versatility, combining low melting points with high decomposition temperatures and reduced viscosities. Regarding the possible applications as surfactants and biocides, furan-based salts could be a valuable alternative to benzyltributylammonium salts and benzalkonium chloride that are produced from non-renewable resources. A new procedure for the allylation of ketones and aldehydes with tetraallyltin in ionic liquids was developed. The reaction afforded high yields both in sulfonate-containing ILs and in ILs without sulfonate upon addition of a small amount of sulfonic acid. The checked reaction resulted in peculiar chemoselectivity favouring aliphatic substrates towards aromatic ketones and good stereoselectivity in the allylation of levoglucosenone. Finally ILs-based systems could be easily and successfully recycled, making the described procedure environmentally benign. The potential role of switchable polarity solvents as a green technology for the extraction of vegetable oil from terrestrial and aquatic biomass has been investigated. The extraction efficiency of terrestrial biomass rich in triacylglycerols, as soy bean flakes and sunflower seeds, was comparable to those of traditional organic solvents, being the yield of vegetable oils recovery very similar. Switchable polarity solvents as been also exploited for the first time in the extraction of hydrocarbons from the microalga Botryococcus braunii, demonstrating the efficiency of the process for the extraction of both dried microalgal biomass and directly of the aqueous growth medium. The switchable polarity solvents exhibited better extraction efficiency than conventional solvents, both with dried and liquid samples. This is an important issue considering that the harvest and the dewatering of algal biomass have a large impact on overall costs and energy balance.

Contributi della Geomatica nella salvaguardia e gestione dei Beni Culturali

Il territorio italiano presenta una grandissima ricchezza nel campo dei Beni Culturali, sia mobili che immobili; si tratta di un patrimonio di grande importanza che va gestito e tutelato nel migliore dei modi e con strumenti adeguati, anche in relazione ai problemi ad esso legati in termini di manutenzione e di salvaguardia dai fattori di rischio a cui pu�� essere esposto. Per una buona conoscenza del Patrimonio Culturale, �� fondamentale un���acquisizione preliminare di informazioni condotte in modo sistematico e unitario, che siano diffuse ed organiche, ma anche utili ad una valutazione preventiva e ad una successiva programmazione degli interventi di restauro di tipo conservativo. In questo ambito, l'impiego delle tecniche e tecnologie geomatiche nel campo dei Beni Culturali, pu�� fornire un valido contributo, che va dalla catalogazione e documentazione del bene culturale al suo controllo e monitoraggio. Oggigiorno il crescente sviluppo di nuove tecnologie digitali, accompagnato dai notevoli passi avanti compiuti dalle discipline della geomatica (in primo luogo topografiche e fotogrammetriche), rende possibile una efficace integrazione tra varie tecniche, favorita anche dalla diffusione di soluzioni per l���interscambio dati e per la comunicazione tra differenti dispositivi. Lo studio oggetto della presente tesi si propone, di approfondire gli aspetti legati all���uso delle tecniche e tecnologie della Geomatica, per mettere in risalto le condizioni di un bene ed il suo stato di degrado. Per la gestione e la salvaguardia di un bene culturale , si presenta il SIT Carta del Rischio che evidenzia le pericolosit�� legate al patrimonio, e come esse sommate alla vulnerabilit�� di un singolo bene, contribuiscano all���individuazione del grado di rischio. di approfondire gli aspetti legati all���uso delle tecniche e tecnologie delle Geomatica, per mettere in risalto le condizioni di un bene ed il suo stato di degrado.