Biomass Gasification - Process analysis and dimensioning aspects for downdraft units and gas cleaning lines

In such territories where food production is mostly scattered in several small / medium size or even domestic farms, a lot of heterogeneous residues are produced yearly, since farmers usually carry out different activities in their properties. The amount and composition of farm residues, therefore, widely change during year, according to the single production process periodically achieved. Coupling high efficiency micro-cogeneration energy units with easy handling biomass conversion equipments, suitable to treat different materials, would provide many important advantages to the farmers and to the community as well, so that the increase in feedstock flexibility of gasification units is nowadays seen as a further paramount step towards their wide spreading in rural areas and as a real necessity for their utilization at small scale. Two main research topics were thought to be of main concern at this purpose, and they were therefore discussed in this work: the investigation of fuels properties impact on gasification process development and the technical feasibility of small scale gasification units integration with cogeneration systems. According to these two main aspects, the present work was thus divided in two main parts. The first one is focused on the biomass gasification process, that was investigated in its theoretical aspects and then analytically modelled in order to simulate thermo-chemical conversion of different biomass fuels, such as wood (park waste wood and softwood), wheat straw, sewage sludge and refuse derived fuels. The main idea is to correlate the results of reactor design procedures with the physical properties of biomasses and the corresponding working conditions of gasifiers (temperature profile, above all), in order to point out the main differences which prevent the use of the same conversion unit for different materials. At this scope, a gasification kinetic free model was initially developed in Excel sheets, considering different values of air to biomass ratio and the downdraft gasification technology as particular examined application. The differences in syngas production and working conditions (process temperatures, above all) among the considered fuels were tried to be connected to some biomass properties, such elementary composition, ash and water contents. The novelty of this analytical approach was the use of kinetic constants ratio in order to determine oxygen distribution among the different oxidation reactions (regarding volatile matter only) while equilibrium of water gas shift reaction was considered in gasification zone, by which the energy and mass balances involved in the process algorithm were linked together, as well. Moreover, the main advantage of this analytical tool is the easiness by which the input data corresponding to the particular biomass materials can be inserted into the model, so that a rapid evaluation on their own thermo-chemical conversion properties is possible to be obtained, mainly based on their chemical composition A good conformity of the model results with the other literature and experimental data was detected for almost all the considered materials (except for refuse derived fuels, because of their unfitting chemical composition with the model assumptions). Successively, a dimensioning procedure for open core downdraft gasifiers was set up, by the analysis on the fundamental thermo-physical and thermo-chemical mechanisms which are supposed to regulate the main solid conversion steps involved in the gasification process. Gasification units were schematically subdivided in four reaction zones, respectively corresponding to biomass heating, solids drying, pyrolysis and char gasification processes, and the time required for the full development of each of these steps was correlated to the kinetics rates (for pyrolysis and char gasification processes only) and to the heat and mass transfer phenomena from gas to solid phase. On the basis of this analysis and according to the kinetic free model results and biomass physical properties (particles size, above all) it was achieved that for all the considered materials char gasification step is kinetically limited and therefore temperature is the main working parameter controlling this step. Solids drying is mainly regulated by heat transfer from bulk gas to the inner layers of particles and the corresponding time especially depends on particle size. Biomass heating is almost totally achieved by the radiative heat transfer from the hot walls of reactor to the bed of material. For pyrolysis, instead, working temperature, particles size and the same nature of biomass (through its own pyrolysis heat) have all comparable weights on the process development, so that the corresponding time can be differently depending on one of these factors according to the particular fuel is gasified and the particular conditions are established inside the gasifier. The same analysis also led to the estimation of reaction zone volumes for each biomass fuel, so as a comparison among the dimensions of the differently fed gasification units was finally accomplished. Each biomass material showed a different volumes distribution, so that any dimensioned gasification unit does not seem to be suitable for more than one biomass species. Nevertheless, since reactors diameters were found out quite similar for all the examined materials, it could be envisaged to design a single units for all of them by adopting the largest diameter and by combining together the maximum heights of each reaction zone, as they were calculated for the different biomasses. A total height of gasifier as around 2400mm would be obtained in this case. Besides, by arranging air injecting nozzles at different levels along the reactor, gasification zone could be properly set up according to the particular material is in turn gasified. Finally, since gasification and pyrolysis times were found to considerably change according to even short temperature variations, it could be also envisaged to regulate air feeding rate for each gasified material (which process temperatures depend on), so as the available reactor volumes would be suitable for the complete development of solid conversion in each case, without even changing fluid dynamics behaviour of the unit as well as air/biomass ratio in noticeable measure. The second part of this work dealt with the gas cleaning systems to be adopted downstream the gasifiers in order to run high efficiency CHP units (i.e. internal engines and micro-turbines). Especially in the case multi–fuel gasifiers are assumed to be used, weightier gas cleaning lines need to be envisaged in order to reach the standard gas quality degree required to fuel cogeneration units. Indeed, as the more heterogeneous feed to the gasification unit, several contaminant species can simultaneously be present in the exit gas stream and, as a consequence, suitable gas cleaning systems have to be designed. In this work, an overall study on gas cleaning lines assessment is carried out. Differently from the other research efforts carried out in the same field, the main scope is to define general arrangements for gas cleaning lines suitable to remove several contaminants from the gas stream, independently on the feedstock material and the energy plant size The gas contaminant species taken into account in this analysis were: particulate, tars, sulphur (in H2S form), alkali metals, nitrogen (in NH3 form) and acid gases (in HCl form). For each of these species, alternative cleaning devices were designed according to three different plant sizes, respectively corresponding with 8Nm3/h, 125Nm3/h and 350Nm3/h gas flows. Their performances were examined on the basis of their optimal working conditions (efficiency, temperature and pressure drops, above all) and their own consumption of energy and materials. Successively, the designed units were combined together in different overall gas cleaning line arrangements, paths, by following some technical constraints which were mainly determined from the same performance analysis on the cleaning units and from the presumable synergic effects by contaminants on the right working of some of them (filters clogging, catalysts deactivation, etc.). One of the main issues to be stated in paths design accomplishment was the tars removal from the gas stream, preventing filters plugging and/or line pipes clogging At this scope, a catalytic tars cracking unit was envisaged as the only solution to be adopted, and, therefore, a catalytic material which is able to work at relatively low temperatures was chosen. Nevertheless, a rapid drop in tars cracking efficiency was also estimated for this same material, so that an high frequency of catalysts regeneration and a consequent relevant air consumption for this operation were calculated in all of the cases. Other difficulties had to be overcome in the abatement of alkali metals, which condense at temperatures lower than tars, but they also need to be removed in the first sections of gas cleaning line in order to avoid corrosion of materials. In this case a dry scrubber technology was envisaged, by using the same fine particles filter units and by choosing for them corrosion resistant materials, like ceramic ones. Besides these two solutions which seem to be unavoidable in gas cleaning line design, high temperature gas cleaning lines were not possible to be achieved for the two larger plant sizes, as well. Indeed, as the use of temperature control devices was precluded in the adopted design procedure, ammonia partial oxidation units (as the only considered methods for the abatement of ammonia at high temperature) were not suitable for the large scale units, because of the high increase of reactors temperature by the exothermic reactions involved in the process. In spite of these limitations, yet, overall arrangements for each considered plant size were finally designed, so that the possibility to clean the gas up to the required standard degree was technically demonstrated, even in the case several contaminants are simultaneously present in the gas stream. Moreover, all the possible paths defined for the different plant sizes were compared each others on the basis of some defined operational parameters, among which total pressure drops, total energy losses, number of units and secondary materials consumption. On the basis of this analysis, dry gas cleaning methods proved preferable to the ones including water scrubber technology in al of the cases, especially because of the high water consumption provided by water scrubber units in ammonia adsorption process. This result is yet connected to the possibility to use activated carbon units for ammonia removal and Nahcolite adsorber for chloride acid. The very high efficiency of this latter material is also remarkable. Finally, as an estimation of the overall energy loss pertaining the gas cleaning process, the total enthalpy losses estimated for the three plant sizes were compared with the respective gas streams energy contents, these latter obtained on the basis of low heating value of gas only. This overall study on gas cleaning systems is thus proposed as an analytical tool by which different gas cleaning line configurations can be evaluated, according to the particular practical application they are adopted for and the size of cogeneration unit they are connected to.

Celti e Reti tra V e I sec. a.C. Oggetti tipo LaTène all'interno della cerchia culturale Fritzens-Sanzeno (arco alpino centro-orientale)

The study of the objects LaTène type found in middle-eastern alpine region (Trentino Alto Adige-Südtirol, Engadina, North Tirol, Voralberg and Villach basin) is aimed to a better comprehension of the complex net of relationships established among the Celts, settled both in the central Europe territories and, since the IV century b.C., in the Po Plain, and the local populations. The ancient authors, who called the inhabitants of this area Raeti, propose for this territory the usual pattern according to which, the population of a region was formed consequently to a migration or was caused by the hunting of pre-existing peoples. The archaeologists, in the last thirty years, recognized a cultural facies typical of the middle-eastern alpine territory during the second Iron Age, and defined that as Fritzens-Sanzeno culture (from the sites of Fritzens, Inn valley, and Sanzeno, Non Valley). The so-called Fritzens-Sanzeno culture spread out without breaks from the material culture of the final Bronze Age and the first Iron Age. This local substratum, characterized by a ceramic repertoire strongly standardized, by peculiar architectural solutions and by a particular typology of rural sacred places (Brandopferplätze), accepted, above all during the second Iron Age, the strong influences coming from the Etruscan world and from the Celtic one (evident in the presence of objects of ornament, of glass artefacts, of elements of the weaponry and of coins). The objects LaTène type become, with different degrees of reliability, important markers of the relationships existing between the Celts and the Raeti, although the ways of interaction (cultural influence, people's movements, commercial exchanges, gifts among élites etc.) is not still clear. The revision of published data and the study of unpublished materials allows to define a rich and articulated picture both to chronological level and to territorial one.

Studio della Peste dei Piccoli Ruminanti nei territori saharawi

La Peste dei Piccoli Ruminanti (PPR) è una patologia virale ed acuta che colpisce i piccoli ruminanti, diffusa in Africa Sub-Sahariana, in Medio Oriente ed in Asia Meridionale. Questo lavoro si propone di effettuare il primo studio epidemiologico sulla PPR nella Repubblica Araba Saharawi Democratica (RASD), che comprende i Campi Profughi Saharawi, in territorio algerino, ed i “Territori Liberati” del Sahara Occidentale, valutando la potenziale presenza, prevalenza e distribuzione del virus della PPR in questi territori. Lo studio si è basato su una metodica di campionamento “a cluster” secondo la tecnica “a due stadi”. Sono stati individuati 23 siti di campionamento dai quali sono stati raccolti un totale di 976 campioni di siero prelevati da pecore, capre e cammelli. I campioni sono stati prelevati in Marzo ed Aprile 2008. I risultati dei test Competitive-Elisa hanno evidenziato una sieroprevalenza nel 28,26% degli animali testati, benché durante la raccolta dei campioni nessun animale abbia presentato sintomi clinici riferibili alla PPR. Tra Gennaio e Maggio 2010, in seguito ad episodi di aumentata mortalità nella popolazione ovi-caprina presente nei Campi Profughi, le autorità veterinarie locali sospettarono un outbreak di PPR. Tra Maggio ed Ottobre 2010 è stato sviluppato un outbreak investigation nei Campi Profughi Saharawi con lo scopo di confermare la circolazione del PPRV. I risultati di laboratorio hanno confermato la presenza del virus nel 33,33% dei campioni. Il sequenziamento del genoma virale ha rivelato che il virus apparteneva al Lignaggio 4 e le analisi filogenetiche hanno indicato una stretta relazione (99.3%) con il PPRV isolato durante l'epidemia di PPR in Marocco del 2008.

Le variazioni anatomiche: La vera immagine dell'anatomia dell'uomo

La studio dell’Anatomia umana presenta una varietà di sfaccettature, che sono alla base della reale comprensione del corpo umano; ovvero la vera anatomia non è quella rappresentata nei testi ma quella che appare durante la dissezione o nelle più sofisticate analisi di immagine. Lo scopo di questa tesi è stato quello di rivisitare alcune situazioni vascolari che possono andare incontro a variazioni e cercare di comprendere, anche con l’aiuto della bibliografia, se tali variazioni possono essere causa o epifenomeni di patologie a carico delle arterie affette dalle variazioni stesse o di territori da esse dipendenti per l’afflusso sanguigno. E’ stata condotta una analisi su preparati cadaverici in particolare in tre distretti: a) addome e tripode celiaco/mesenterica superiore; b) circolo cerebrale; d) orco aortico.

Sviluppo di mezzi e sistemi di sorveglianza e monitoraggio dei ditteri culicidi di importanza sanitaria

Nel corso degli ultimi anni le problematiche legate al ruolo vettore delle zanzare stanno emergendo sia per quanto riguarda l’uomo che gli animali allevati e selvatici. Diversi arbovirus come West Nile, Chikungunya, Usutu e Dengue, possono facilmente spostarsi a livello planetario ed essere introdotti anche nei nostri territori dove possono dare avvio a episodi epidemici. Le tecniche di monitoraggio e sorveglianza dei Culicidi possono essere convenientemente utilizzate per il rilevamento precoce dell’attività virale sul territorio e per la stima del rischio di epidemie al fine dell’adozione delle opportune azioni di Sanità Pubblica. Io scopo della ricerca del dottorato è inserito nel contesto dei temi di sviluppo del Piano regionale sorveglianza delle malattie trasmesse da vettori in Emilia Romagna. La ricerca condotta è inquadrata prevalentemente sotto l’aspetto entomologico applicativo di utilizzo di dispositivi (trappole) che possano catturare efficacemente possibili insetti vettori. In particolare questa ricerca è stata mirata allo studio comparativo in campo di diversi tipi di trappole per la cattura di adulti di zanzara, cercando di interpretare i dati per capire un potenziale valore di efficacia/efficienza nel rilevamento della circolazione virale e come supporto alla pianificazione della rete di sorveglianza dal punto di vista operativo mediante dispositivi adeguati alle finalità d’indagine. Si è cercato di trovare un dispositivo idoneo, approfondendone gli aspetti operativi/funzionali, ai fini di cattura del vettore principale del West Nile Virus, cioè la zanzara comune, da affiancare all’unica tipologia di trappola usata in precedenza. Le prove saranno svolte sia in campo che presso il laboratorio di Entomologia Medica Veterinaria del Centro Agricoltura Ambiente “G. Nicoli” di Crevalcore, in collaborazione con il Dipartimento di Scienze e Tecnologie Agroambientali della Facoltà di Agraria dell’Università di Bologna.

Cultura materiale ed espansione di Roma: Il caso dell'Ager Gallicus

Lo scritto ha l’obiettivo di definire dinamiche e cronologie di quel complesso processo espansionistico che portò Roma alla conquista dei territori dell’Ager Gallicus, partendo dall’analisi dettagliata della cultura materiale e dei rispettivi contesti di provenienza emersi dalle recenti indagini archeologiche realizzate dal Dipartimento di Storia Culture Civiltà dell’Università degli Studi di Bologna nella città di Senigallia. In armonia con quanto testimoniato dalle sequenze stratigrafiche documentate, si delineano quattro principali fasi di vita dell’abitato: la prima preromana, la seconda riferibile alla prima fase di romanizzazione del sito, la terza inerente allo sviluppo dell’insediamento con la fondazione della colonia romana e l’ultima riferibile all’età repubblicana. Emerge con chiarezza la presenza già dalla fine del IV-inizio III a.C., di un insediamento romano nel territorio della città, sviluppatosi con la fondazione di un’area sacra e la predisposizione di un’area produttiva. La scelta del sito di Sena Gallica fu strategica: un territorio idoneo allo sfruttamento agricolo e utile come testa di ponte per la conquista dei territori del Nord Italia. Inoltre, questo centro aveva già intrecciato rapporti commerciali con gli insediamenti costieri adriatici e mediterranei. La presenza di ceramica di produzione locale, il rinvenimento di elementi distanziatori e le caratteristiche geomorfologiche del sito, fanno ipotizzare la presenza in loco di un’officina ceramica. Ciò risulta di grande importanza dato che tutte le attestazioni ceramiche prodotte localmente e rinvenute nel territorio, fino ad oggi sono attribuite alle officine di Aesis e Ariminum. Dunque Sena Gallica sarebbe stata un centro commerciale e produttivo. La precoce presenza di ceramica a Vernice Nera di tipo romano-laziale prodotte localmente prima dell’istituzione ufficiale della colonia, che permette di ipotizzare uno stanziamento di piccoli gruppi di Romani in territori appena conquistati ma non ancora colonizzati, attestata a Sena Gallica, trova riscontro anche in altri centri adriatici come Ariminum, Aesis, Pisaurum, Suasa e Cattolica.

The Making of a Shiite Bourgeoisie in Lebanon Political Mobilisation, Economic Resources and Formation of a Social Group

The thesis analyses the making of the Shiite middle- and upper/entrepreneurial-class in Lebanon from the 1960s till the present day. The trajectory explores the historical, political and social (internal and external) factors that brought a sub-proletariat to mobilise and become an entrepreneurial bourgeoisie in the span of less than three generations. This work proposes the main theoretical hypothesis to unpack and reveal the trajectory of a very recent social class that through education, diaspora, political and social mobilisation evolved in a few years into a very peculiar bourgeoisie: whereas Christian-Maronite middle class practically produced political formations and benefited from them and from Maronite’s state supremacy (National Pact, 1943) reinforcing the community’s status quo, Shiites built their own bourgeoisie from within, and mobilised their “cadres” (Boltanski) not just to benefit from their renovated presence at the state level, but to oppose to it. The general Social Movement Theory (SMT), as well as a vast amount of the literature on (middle) class formation are therefore largely contradicted, opening up new territories for discussion on how to build a bourgeoisie without the state’s support (Social Mobilisation Theory, Resource Mobilisation Theory) and if, eventually, the middle class always produces democratic movements (the emergence of a social group out of backwardness and isolation into near dominance of a political order). The middle/upper class described here is at once an economic class related to the control of multiple forms of capital, and produced by local, national, and transnational networks related to flows of services, money, and education, and a culturally constructed social location and identity structured by economic as well as other forms of capital in relation to other groups in Lebanon.