Sensitivity of the Top quark mass measurement with the CMS experiment at LHC using t-tbar multijet simulated events

This thesis comes after a strong contribution on the realization of the CMS computing system, which can be seen as a relevant part of the experiment itself. A physics analysis completes the road from Monte Carlo production and analysis tools realization to the final physics study which is the actual goal of the experiment. The topic of physics work of this thesis is the study of tt events fully hadronic decay in the CMS experiment. A multi-jet trigger has been provided to fix a reasonable starting point, reducing the multi-jet sample to the nominal trigger rate. An offline selection has been provided to reduce the S/B ratio. The b-tag is applied to provide a further S/B improvement. The selection is applied to the background sample and to the samples generated at different top quark masses. The top quark mass candidate is reconstructed for all those samples using a kinematic fitter. The resulting distributions are used to build p.d.f.’s, interpolating them with a continuous arbitrary curve. These curves are used to perform the top mass measurement through a likelihood comparison

Organocatalytic asymmetric mannich-type reactions: an easy approach to optically active amine derivatives

The topics I came across during the period I spent as a Ph.D. student are mainly two. The first concerns new organocatalytic protocols for Mannich-type reactions mediated by Cinchona alkaloids derivatives (Scheme I, left); the second topic, instead, regards the study of a new approach towards the enantioselective total synthesis of Aspirochlorine, a potent gliotoxin that recent studies indicate as a highly selective and active agent against fungi (Scheme I, right). At the beginning of 2005 I had the chance to join the group of Prof. Alfredo Ricci at the Department of Organic Chemistry of the University of Bologna, starting my PhD studies. During the first period I started to study a new homogeneous organocatalytic aza-Henry reaction by means of Cinchona alkaloid derivatives as chiral base catalysts with good results. Soon after we introduced a new protocol which allowed the in situ synthesis of N-carbamoyl imines, scarcely stable, moisture sensitive compounds. For this purpose we used α-amido sulfones, bench stable white crystalline solids, as imine precursors (Scheme II). In particular we were able to obtain the aza-Henry adducts, by using chiral phase transfer catalysis, with a broad range of substituents as R-group and excellent results, unprecedented for Mannich-type transformations (Scheme II). With the optimised protocol in hand we have extended the methodology to the other Mannich-type reactions. We applied the new method to the Mannich, Strecker and Pudovik (hydrophosphonylation of imines) reactions with very good results in terms of enantioselections and yields, broadening the usefulness of this novel protocol. The Mannich reaction was certainly the most extensively studied work in this thesis (Scheme III). Initially we developed the reaction with α-amido sulfones as imine precursors and non-commercially available malonates with excellent results in terms of yields and enantioselections.3 In this particular case we recorded 1 mol% of catalyst loading, very low for organocatalytic processes. Then we thought to develop a new Mannich reaction by using simpler malonates, such as dimethyl malonate.4 With new optimised condition the reaction provided slightly lower enantioselections than the previous protocol, but the Mannich adducts were very versatile for the obtainment of β3-amino acids. Furthermore we performed the first addition of cyclic β-ketoester to α-amido sulfones obtaining the corresponding products in good yield with high level of diastereomeric and enantiomeric excess (Scheme III). Further studies were done about the Strecker reaction mediated by Cinchona alkaloid phase-transfer quaternary ammonium salt derivatives, using acetone cyanohydrin, a relatively harmless cyanide source (Scheme IV). The reaction proceeded very well providing the corresponding α-amino nitriles in good yields and enantiomeric excesses. Finally, we developed two new complementary methodologies for the hydrophosphonylation of imines (Scheme V). As a result of the low stability of the products derived from aromatic imines, we performed the reactions in mild homogeneous basic condition by using quinine as a chiral base catalyst giving the α-aryl-α-amido phosphonic acid esters as products (Scheme V, top).6 On the other hand, we performed the addition of dialkyl phosphite to aliphatic imines by using chiral Cinchona alkaloid phase transfer quaternary ammonium salt derivatives using our methodology based on α-amido sulfones (Scheme V, bottom). The results were good for both procedures covering a broad range of α-amino phosphonic acid ester. During the second year Ph.D. studies, I spent six months in the group of Prof. Steven V. Ley, at the Department of Chemistry of the University of Cambridge, in United Kingdom. During this fruitful period I have been involved in a project concerning the enantioselective synthesis of Aspirochlorine. We provided a new route for the synthesis of a key intermediate, reducing the number of steps and increasing the overall yield. Then we introduced a new enantioselective spirocyclisation for the synthesis of a chiral building block for the completion of the synthesis (Scheme VI).

Biomeccanica del servizio e del diritto nel tennis: confronto fra atleti di livello di gioco differente

Il tennis è uno sport molto diffuso che negli ultimi trent’anni ha subito molti cambiamenti. Con l’avvento di nuovi materiali più leggeri e maneggevoli la velocità della palla è aumentata notevolmente, rendendo così necessario una modifica a livello tecnico dei colpi fondamentali. Dalla ricerca bibliografica sono emerse interessanti indicazioni su angoli e posizioni corporee ideali da mantenere durante le varie fasi dei colpi, confrontando i giocatori di altissimo livello. Non vi sono invece indicazioni per i maestri di tennis su quali siano i parametri più importanti da allenare a seconda del livello di gioco del proprio atleta. Lo scopo di questa tesi è quello di individuare quali siano le variabili tecniche che influenzano i colpi del diritto e del servizio confrontando atleti di genere differente, giocatori di livello di gioco diverso (esperti, intermedi, principianti) e dopo un anno di attività programmata. Confrontando giocatori adulti di genere diverso, è emerso che le principali differenze sono legate alle variabili di prestazione (velocità della palla e della racchetta) per entrambi i colpi. Questi dati sono simili a quelli riscontrati nel test del lancio della palla, un gesto non influenzato dalla tecnica del colpo. Le differenze tecniche di genere sono poco rilevanti ed attribuibili alla diversa interpretazione dei soggetti. Nel confronto di atleti di vario livello di gioco le variabili di prestazione presentano evidenti differenze, che possono essere messe in relazione con alcune differenze tecniche rilevate nei gesti specifici. Nel servizio i principianti tendono a direzionare l’arto superiore dominante verso la zona bersaglio, abducendo maggiormente la spalla ed avendo il centro della racchetta più a destra rispetto al polso. Inoltre, effettuano un caricamento minore degli arti inferiori, del tronco e del gomito. Per quanto riguarda il diritto si possono evidenziare queste differenze: l’arto superiore è sempre maggiormente esteso per il gruppo dei principianti; il tronco, nei giocatori più abili viene utilizzato in maniera più marcata, durante la fase di caricamento, in movimenti di torsione e di inclinazione laterale. Gli altri due gruppi hanno maggior difficoltà nell’eseguire queste azioni preparatorie, in particolare gli atleti principianti. Dopo un anno di attività programmata sono stati evidenziati miglioramenti prestativi. Anche dal punto di vista tecnico sono state notate delle differenze che possono spiegare il miglioramento della performance nei colpi. Nel servizio l’arto superiore si estende maggiormente per colpire la palla più in alto possibile. Nel diritto sono da sottolineare soprattutto i miglioramenti dei movimenti del tronco in torsione ed in inclinazione laterale. Quindi l’atleta si avvicina progressivamente ad un’esecuzione tecnica corretta. In conclusione, dal punto di vista tecnico non sono state rilevate grosse differenze tra i due generi che possano spiegare le differenze di performance. Perciò questa è legata più ad un fattore di forza che dovrà essere allenata con un programma specifico. Nel confronto fra i vari livelli di gioco e gli effetti di un anno di pratica si possono individuare variabili tecniche che mostrano differenze significative tra i gruppi sperimentali. Gli evoluti utilizzano tutto il corpo per effettuare dei colpi più potenti, utilizzando in maniera tecnicamente più valida gli arti inferiori, il tronco e l’arto superiore. I principianti utilizzano prevalentemente l’arto superiore con contributi meno evidenti degli altri segmenti. Dopo un anno di attività i soggetti esaminati hanno dimostrato di saper utilizzare meglio il tronco e l’arto superiore e ciò può spiegare il miglioramento della performance. Si può ipotizzare che, per il corretto utilizzo degli arti inferiori, sia necessario un tempo più lungo di apprendimento oppure un allenamento più specifico.

Measurement of top quark pairs production cross-section in the semi-leptonic channel with the ATLAS experiment

This thesis is about three major aspects of the identification of top quarks. First comes the understanding of their production mechanism, their decay channels and how to translate theoretical formulae into programs that can simulate such physical processes using Monte Carlo techniques. In particular, the author has been involved in the introduction of the POWHEG generator in the framework of the ATLAS experiment. POWHEG is now fully used as the benchmark program for the simulation of ttbar pairs production and decay, along with MC@NLO and AcerMC: this will be shown in chapter one. The second chapter illustrates the ATLAS detectors and its sub-units, such as calorimeters and muon chambers. It is very important to evaluate their efficiency in order to fully understand what happens during the passage of radiation through the detector and to use this knowledge in the calculation of final quantities such as the ttbar production cross section. The last part of this thesis concerns the evaluation of this quantity deploying the so-called "golden channel" of ttbar decays, yielding one energetic charged lepton, four particle jets and a relevant quantity of missing transverse energy due to the neutrino. The most important systematic errors arising from the various part of the calculation are studied in detail. Jet energy scale, trigger efficiency, Monte Carlo models, reconstruction algorithms and luminosity measurement are examples of what can contribute to the uncertainty about the cross-section.

Static analysis of functionally graded cylindrical and conical shells or panels using the generalized unconstrained third order theory coupled with the stress recovery

A 2D Unconstrained Third Order Shear Deformation Theory (UTSDT) is presented for the evaluation of tangential and normal stresses in moderately thick functionally graded conical and cylindrical shells subjected to mechanical loadings. Several types of graded materials are investigated. The functionally graded material consists of ceramic and metallic constituents. A four parameter power law function is used. The UTSDT allows the presence of a finite transverse shear stress at the top and bottom surfaces of the graded shell. In addition, the initial curvature effect included in the formulation leads to the generalization of the present theory (GUTSDT). The Generalized Differential Quadrature (GDQ) method is used to discretize the derivatives in the governing equations, the external boundary conditions and the compatibility conditions. Transverse and normal stresses are also calculated by integrating the three dimensional equations of equilibrium in the thickness direction. In this way, the six components of the stress tensor at a point of the conical or cylindrical shell or panel can be given. The initial curvature effect and the role of the power law functions are shown for a wide range of functionally conical and cylindrical shells under various loading and boundary conditions. Finally, numerical examples of the available literature are worked out.

Strategic decision making in international firms: effect of top management team internationalization on international strategic decision process

In this research project, I have integrated two research streams on international strategic decisions making in international firms: upper echelons or top management teams (TMT) internationalization research and international strategic decision making process research. Both research streams in international business literature have evolved independently, but there is a potential in combining these two streams of research. The first empirical paper “TMT internationalization and international strategic decision making process: a decision level analysis of rationality, speed, and performance” explores the influence of TMT internationalization on strategic decision rationality and speed and, subsequently, their effect on international strategic decision effectiveness (performance). The results show that the internationalization of TMT is positively related to decision effectiveness and this relationship is mediated by decision rationality while the hypotheses regarding the association between TMT internationalization and decision speed, and the mediating effect of speed were not supported. The second paper “TMT internationalization and international strategic decision rationality: the mediating role of international information” of my thesis is a simple but logical extension of first paper. The first paper showed that TMT Internationalization has a significant positive effect on international strategic decision rationality. The second paper explicitly showed that TMT internationalization affect on international strategic decision rationality comes from two sources: international experience (personal international knowledge and information) and international information collected from managerial international contacts. For this research project, I have collected data from international software firms in Pakistan. My research contributes to the literature on upper echelons theory and strategic decision making in context of international business and international firms by explicitly examining the link between TMT internationalization and characteristics of strategic decisions making process (i.e. rationality and speed) in international firms and their possible mediating effect on performance.