New catalytic processes for the synthesis of adipic acid

The aim of my Ph.D. research was to study the new synthetic ways for the production of adipic acid. Three different pathways were studied: i) oxidation of cyclohexanone with molecular oxygen using Keggin – heteropolycompounds as the catalyst, ii) Baeyer – Villiger oxidation of cyclohexanone with hydrogen peroxide in the presence of two different heterogeneous catalysts, titanium silicalite and silica grafted decatungstate, iii) two step synthesis of adipic acid starting from cyclohexene via 1,2-cyclohexanediol. The first step was catalyzed by H2WO4 in the presence of the phase transfer catalyst, the oxidant was hydrogen peroxide. The second step, oxidation of 1,2 – cyclohexanediol was performed in the presence of oxygen and the heterogeneous catalyst – ruthenium on alumina. The results of my research showed that: i) Oxidation of cyclohexanone with molecular oxygen using Keggin heteropolycompounds is possible, anyway the conversion of ketone is low and the selectivity to adipic acid is lowered by the consecutive reaction to from lower diacids. Moreover it was found out, that there are two mechanisms involved: redox type and radicalic chain-reaction autoxidation. The presence of the different mechanism is influenced by the reaction condition. ii) It is possible to perform thermally activated oxidation of cyclohexanone and obtain non negligible amount of the products (caprolactone and adipic acid). Performing the catalyzed reaction it was demonstrated that the choice of the reaction condition and of the catalyst plays a crucial role in the product selectivity, explaining the discrepancies between the literature and our research. iii) Interesting results can be obtained performing the two step oxidation of cyclohexene via 1,2-cyclohexanediol. In the presence of phase transfer catalyst it is possible to obtain high selectivity to alcohol with stoichiometric amount of oxidant. In the second step of the synthesis, the conversion of alcohol is rather low with modest selectivity to adipic acid

'A Distortion in the mirror of being': verso un modello liquido di personaggio. Da Nabokov alle sperimentazioni contemporanee in ambito slavo

La tesi mira a ridefinire lo statuto del personaggio nell’ambito del self-conscious novel postmoderno, alla luce delle più recenti tendenze narratologiche, con particolare riferimento all’unnatural narratology. Per poter presentare un modello scientificamente valido si è fatto ricorso alla comparazione della produzione letteraria di due macro-aree: quella britannica e quella slava (Russia - Unione Sovietica - e Polonia). Come figura di mediazione tra queste due culture si pone senza dubbio Vladimir V. Nabokov, cardine e personalità di spicco della ricerca. Tra le analisi testuali proposte sono stati presi in considerazione i seguenti autori: Julian Barnes, Vladimir Nabokov, Daniil Charms, Konstantin Vaginov, Andrej Bitov, Saša Sokolov, Bruno Schulz e Tadeusz Kantor.

Subject-specific musculoskeletal models of the lower limbs for the prediction of skeletal loads during motion

The determination of skeletal loading conditions in vivo and their relationship to the health of bone tissues, remain an open question. Computational modeling of the musculoskeletal system is the only practicable method providing a valuable approach to muscle and joint loading analyses, although crucial shortcomings limit the translation process of computational methods into the orthopedic and neurological practice. A growing attention focused on subject-specific modeling, particularly when pathological musculoskeletal conditions need to be studied. Nevertheless, subject-specific data cannot be always collected in the research and clinical practice, and there is a lack of efficient methods and frameworks for building models and incorporating them in simulations of motion. The overall aim of the present PhD thesis was to introduce improvements to the state-of-the-art musculoskeletal modeling for the prediction of physiological muscle and joint loads during motion. A threefold goal was articulated as follows: (i) develop state-of-the art subject-specific models and analyze skeletal load predictions; (ii) analyze the sensitivity of model predictions to relevant musculotendon model parameters and kinematic uncertainties; (iii) design an efficient software framework simplifying the effort-intensive phases of subject-specific modeling pre-processing. The first goal underlined the relevance of subject-specific musculoskeletal modeling to determine physiological skeletal loads during gait, corroborating the choice of full subject-specific modeling for the analyses of pathological conditions. The second goal characterized the sensitivity of skeletal load predictions to major musculotendon parameters and kinematic uncertainties, and robust probabilistic methods were applied for methodological and clinical purposes. The last goal created an efficient software framework for subject-specific modeling and simulation, which is practical, user friendly and effort effective. Future research development aims at the implementation of more accurate models describing lower-limb joint mechanics and musculotendon paths, and the assessment of an overall scenario of the crucial model parameters affecting the skeletal load predictions through probabilistic modeling.

Influence of plant structure, cultural pratices and environmental conditions on the development of the bacterial canker of kiwifruits

Italy has a preeminent rank in kiwifruit industry, being the first exporter and the second largest producer after China. However, in the last years kiwifruit yields and the total cultivated area considerably decreased, due to the pandemic spread of the bacterial canker caused by Pseudomonas syringae pv. actinidiae (Psa). Several climatic conditions and cultural practices affect the development of the bacterial canker. This research work focused on the impact of agricultural practices and microclimate conditions on the incidence and epidemiology of Psa in the orchard. Therefore, the effect of fertilization, irrigation, use of bio-regulators, rootstock, training system and pruning were examined. The effect of different tunnel systems was analyzed as well, to study the plant-pathogen interaction. Considering the importance of insects as vectors in other pathosystems, the role of Metcalfa pruinosa in the spread of the bacterial canker was investigated in controlled conditions. In addition, quality and storage properties of fruits from infected plants were assessed. The study of all these aspects of the agronomic practices is useful to define a strategy to limit the bacterial diffusion in the orchard. Overall, excess nitrogen fertilization, water stress, stagnant water supplies, pruning before summer and the high number of Metcalfa pruinosa increased the Psa incidence. In contrast, tunnel covers may be useful for the control of the disease, with special attention to the kind of material.

Development and chemo-mechanical characterization of eco-compatible extenders containing REOB and recycled tyres’ rubber for the production of greener bituminous binders

The concepts of circular economy and sustainability are the basis of the present experimental research that seeks to reduce the environmental impact of traditional road construction materials. This study mainly focuses on the development and the chemo-mechanical characterization of bitumen extenders containing rubber (R) from end-of-life tyres (ELTs) and re-refined engine oil bottoms (REOBs) for the production of innovative and eco-friendly extended bitumens (i.e. bituminous binders containing 25%wt. of recycled products) and asphalt mixtures. In order to create more sustainable asphalt mixes, also recycled aggregates are used for partial replacement of virgin natural aggregates in the aggregate skeleton. The experimental program encompassed five successive steps: (i) the evaluation of physicochemical properties of R and REOB, (ii) the definition of the optimal extenders by the development of a new protocol and their characterizations, (iii) the realization and investigation of the chemo-rheological responses of the extended bitumens at different boundary conditions, (iv) the assessment of the effectiveness of analytical method to predict the rheological parameters of extended bitumens and, finally, (v) the analysis of the mechanical performances of the corresponding asphalt mixtures. A standard 50/70 penetration grade bitumen was chosen as a reference material and the main constituent of the innovative bituminous products. The results of this study underlined the importance of material characterization. The incorporation of R-REOB extenders strongly affects the chemo-rheological responses of the resulting extended bitumens and asphalt mixtures overall the boundary conditions. While the presence of R and the consequent formation of a polymer network improves the elasticity of the final products, especially at high test temperatures; the addition of REOB, softens the bituminous binders and asphalt mixes increasing their response at low test temperatures. Nonetheless, the use of recycled products increased the susceptibility of bituminous material under damaging conditions, which would need further investigations.

The effect of cross-linker on endogenous enzymatic activity within radicular dentin and bond strength between intraradicular post and radicular dentin

The primary aim was to evaluate the effect of 1-ethyl-3-(3-dimethylamino-propyl) carbodiimide (EDC) on endogenous enzymatic activity within radicular dentin and push-out bond strength of adhesively luted fiber posts, at baseline and after artificial aging. Additionally, the effect of different cementation strategies on endogenous enzymatic activity and fiber post retention was evaluated. The experiment was carried out on extracted human teeth, following endodontic treatment and fiber post cementation. Three cementation strategies were performed: resin cement in combination with etch-and-rinse (EAR) adhesive system, with self-etch (SE) system and self-adhesive (SE) cement. Each of the mentioned strategies had a control and experimental (EDC) group in which root canal was irrigated with 0.3M EDC for 1 minute. The push-out bond strength test was performed 24h after cementation and after 40.000 thermocycles. In order to investigate the effect of EDC and different cementation strategies, in situ zymography analyses of the resin-dentin interfaces were conducted. Statistical analyses were conducted with the software Stata 12.0 (Stata Corp, College Station, Texas, USA) and the significance was set for p<0.05. The results of statistical analysis (ANOVA) showed that the variables “EDC”, “root region” and “artificial aging” significantly influenced fiber posts’ retention to root canal (p<0.05). The highest values were observed in coronal third. The mean values observed after artificial aging were lower when compared to baseline, however EDC was effective in preserving bond strength. The level of enzymatic activity varied between the groups and EDC had a beneficial effect on silencing the enzymatic activity. Within the limitations of the study, it was concluded that the choice of cementation strategy did not influence posts’ retention, while EDC contributed to the preservation of bond strength after artificial aging and reduced enzymatic activity within radicular dentin. In vivo trials are necessary to confirm the results of this in vitro study.

1° level of automation: the effectiveness of adaptive cruise control on driving and visual behaviour

The research activities have allowed the analysis of the driver assistance systems, called Advanced Driver Assistance Systems (ADAS) in relation to road safety. The study is structured according to several evaluation steps, related to definite on-site tests that have been carried out with different samples of users, according to their driving experience with the ACC. The evaluation steps concern: •The testing mode and the choice of suitable instrumentation to detect the driver’s behaviour in relation to the ACC. •The analysis modes and outputs to be obtained, i.e.: - Distribution of attention and inattention; - Mental workload; - The Perception-Reaction Time (PRT), the Time To Collision (TTC) and the Time Headway (TH). The main purpose is to assess the interaction between vehicle drivers and ADAS, highlighting the inattention and variation of the workloads they induce regarding the driving task. The research project considered the use of a system for monitoring visual behavior (ASL Mobile Eye-XG - ME), a powerful GPS that allowed to record the kinematic data of the vehicle (Racelogic Video V-BOX) and a tool for reading brain activity (Electroencephalographic System - EEG). Just during the analytical phase, a second and important research objective was born: the creation of a graphical interface that would allow exceeding the frame count limit, making faster and more effective the labeling of the driver’s points of view. The results show a complete and exhaustive picture of the vehicle-driver interaction. It has been possible to highlight the main sources of criticalities related to the user and the vehicle, in order to concretely reduce the accident rate. In addition, the use of mathematical-computational methodologies for the analysis of experimental data has allowed the optimization and verification of analytical processes with neural networks that have made an effective comparison between the manual and automatic methodology.

La costruzione razionale della casa. Scritti e progetti di Giuseppe Pagano

The rational construction of the house. The writings and projects of Giuseppe Pagano Description, themes and research objectives The research aims at analysing the architecture of Giuseppe Pagano, which focuses on the theme of dwelling, through the reading of 3 of his house projects. On the one hand, these projects represent “minor” works not thoroughly known by Pagano’s contemporary critics; on the other they emphasise a particular methodological approach, which serves the author to explore a theme closely linked to his theoretical thought. The house project is a key to Pagano’s research, given its ties to the socio-cultural and political conditions in which the architect was working, so that it becomes a mirror of one of his specific and theoretical path, always in a state of becoming. Pagano understands architecture as a “servant of the human being”, subject to a “utilitarian slavery” since it is a clear, essential and “modest” answer to specific human needs, free from aprioristic aesthetic and formal choices. It is a rational architecture in sensu stricto; it constitutes a perfect synthesis between cause and effect and between function and form. The house needs to accommodate these principles because it is closely intertwined with human needs and intimately linked to a specific place, climatic conditions and technical and economical possibilities. Besides, differently from his public and common masterpieces such as the Palazzo Gualino, the Istituto di Fisica and the Università Commerciale Bocconi, the house projects are representative of a precise project will, which is expressed in a more authentic way, partially freed from political influences and dogmatic preoccupations and, therefore, far from the attempt to research a specific expressive language. I believe that the house project better represents that “ingenuity”, freshness and “sincerity” that Pagano identifies with the minor architecture, thereby revealing a more authentic expression of his understanding of a project. Therefore, the thesis, by tracing the theoretical research of Pagano through the analysis of some of his designed and built works, attempts to identify a specific methodological approach to Pagano’s project, which, developed through time, achieves a certain clarity in the 1930s. In fact, this methodological approach becomes more evident in his last projects, mainly regarding the house and the urban space. These reflect the attempt to respond to the new social needs and, at the same time, they also are an expression of a freer idea of built architecture, closely linked with the place and with the human being who dwells it. The three chosen projects (Villa Colli, La Casa a struttura d’acciaio and Villa Caraccio) make Pagano facing different places, different customers and different economic and technical conditions, which, given the author’s biography, correspond to important historical and political conditions. This is the reason why the projects become apparently distant works, both linguistically and conceptually, to the point that one can define them as ”eclectic”. However, I argue that this eclecticism is actually an added value to the architectural work of Pagano, steaming from the use of a method which, having as a basis the postulate of a rational architecture as essence and logic of building, finds specific variations depending on the multiple variables to be addressed by the project. This is the methodological heritage that Pagano learns from the tradition, especially that of the rural residential architecture, defined by Pagano as a “dictionary of the building logic of man”, as an “a-stylistic background”. For Pagano this traditional architecture is a clear expression of the relationships between a theme and its development, an architectural “fact” that is resolved with purely technical and utilitarian aims and with a spontaneous development far from any aprioristic theoretical principle. Architecture, therefore, cannot be an invention for Pagano and the personal contribution of each architect has to consider his/her close relationship with the specific historical context, place and new building methods. These are basic principles in the methodological approach that drives a great deal of his research and that also permits his thought to be modern. I argue that both ongoing and new collaborations with younger protagonists of the culture and architecture of the period are significant for the development of his methodology. These encounters represent the will to spread his own understanding of the “new architecture” as well as a way of self-renewal by confronting the self with new themes and realities and by learning from his collaborators. Thesis’ outline The thesis is divided in two principal parts, each articulated in four chapters attempting to offer a new reading of the theory and work of Pagano by emphasising the central themes of the research. The first chapter is an introduction to the thesis and to the theme of the rational house, as understood and developed in its typological and technical aspects by Pagano and by other protagonists of the Italian rationalism of the 1930s. Here the attention is on two different aspects defining, according to Pagano, the house project: on the one hand, the typological renewal, aimed at defining a “standard form” as a clear and essential answer to certain needs and variables of the project leading to different formal expressions. On the other, it focuses on the building, understood as a technique to “produce” architecture, where new technologies and new materials are not merely tools but also essential elements of the architectural work. In this way the villa becomes different from the theme of the common house or from that of the minimalist house, by using rules in the choice of material and in the techniques that are every time different depending on the theme under exploration and on the contingency of place. It is also visible the rigorous rationalism that distinguishes the author's appropriation of certain themes of rural architecture. The pages of “Casabella” and the events of the contemporary Triennali form the preliminary material for the writing of this chapter given that they are primary sources to individuate projects and writings produced by Pagano and contemporary architects on this theme. These writings and projects, when compared, reconstruct the evolution of the idea of the rational house and, specifically, of the personal research of Pagano. The second part regards the reading of three of Pagano’s projects of houses as a built verification of his theories. This section constitutes the central part of the thesis since it is aimed at detecting a specific methodological approach showing a theoretical and ideological evolution expressed in the vast edited literature. The three projects that have been chosen explore the theme of the house, looking at various research themes that the author proposes and that find continuity in the affirmation of a specific rationalism, focussed on concepts such as essentiality, utility, functionality and building honesty. These concepts guide the thought and the activities of Pagano, also reflecting a social and cultural period. The projects span from the theme of the villa moderna, Villa Colli, which, inspired by the architecture of North Europe, anticipates a specific rationalism of Pagano based on rigour, simplicity and essentiality, to the theme of the common house, Casa a struttura d’acciaio, la casa del domani, which ponders on the definition of new living spaces and, moreover, on new concepts of standardisation, economical efficiency and new materials responding to the changing needs of the modern society. Finally, the third project returns to the theme of the, Villa Caraccio, revisiting it with new perspectives. These perspectives find in the solution of the open plant, in the openness to nature and landscape and in the revisiting of materials and local building systems that idea of the freed house, which express clearly a new theoretical thought. Methodology It needs to be noted that due to the lack of an official Archive of Pagano’s work, the analysis of his work has been difficult and this explains the necessity to read the articles and the drawings published in the pages of «Casabella» and «Domus». As for the projects of Villa Colli and Casa a struttura d’acciaio, parts of the original drawings have been consulted. These drawings are not published and are kept in private archives of the collaborators of Pagano. The consultation of these documents has permitted the analysis of the cited works, which have been subject to a more complete reading following the different proposed solutions, which have permitted to understand the project path. The projects are analysed thought the method of comparison and critical reading which, specifically, means graphical elaborations and analytical schemes, mostly reconstructed on the basis of original projects but, where possible, also on a photographic investigation. The focus is on the project theme which, beginning with a specific living (dwelling) typology, finds variations because of the historico-political context in which Pagano is embedded and which partially shapes his research and theoretical thought, then translated in the built work. The analysis of the work follows, beginning, where possible, from a reconstruction of the evolution of the project as elaborated on the basis of the original documents and ending on an analysis of the constructive principles and composition. This second phase employs a methodology proposed by Pagano in his article Piante di ville, which, as expected, focuses on the plant as essential tool to identify the “true practical and poetic qualities of the construction”(Pagano, «Costruzioni-Casabella», 1940, p. 2). The reading of the project is integrated with the constructive analyses related to the technical aspects of the house which, in the case of Casa a struttura d’acciaio, play an important role in the project, while in Villa Colli and in Villa Caraccio are principally linked to the choice of materials for the construction of the different architectural elements. These are nonetheless key factors in the composition of the work. Future work could extend this reading to other house projects to deepen the research that could be completed with the consultation of Archival materials, which are missing at present. Finally, in the appendix I present a critical selection of the Pagano’s writings, which recall the themes discussed and embodied by the three projects. The texts have been selected among the articles published in Casabella and in other journals, completing the reading of the project work which cannot be detached from his theoretical thought. Moving from theory to project, we follow a path that brings us to define and deepen the central theme of the thesis: rational building as the principal feature of the architectural research of Pagano, which is paraphrased in multiple ways in his designed and built works.

Elastic Propagation in random media: applications to the imaging of volcano structures

High-frequency seismograms contain features that reflect the random inhomogeneities of the earth. In this work I use an imaging method to locate the high contrast small- scale heterogeneity respect to the background earth medium. This method was first introduced by Nishigami (1991) and than applied to different volcanic and tectonically active areas (Nishigami, 1997, Nishigami, 2000, Nishigami, 2006). The scattering imaging method is applied to two volcanic areas: Campi Flegrei and Mt. Vesuvius. Volcanic and seismological active areas are often characterized by complex velocity structures, due to the presence of rocks with different elastic properties. I introduce some modifications to the original method in order to make it suitable for small and highly complex media. In particular, for very complex media the single scattering approximation assumed by Nishigami (1991) is not applicable as the mean free path becomes short. The multiple scattering or diffusive approximation become closer to the reality. In this thesis, differently from the ordinary Nishigami’s method (Nishigami, 1991), I use the mean of the recorded coda envelope as reference curve and calculate the variations from this average envelope. In this way I implicitly do not assume any particular scattering regime for the "average" scattered radiation, whereas I consider the variations as due to waves that are singularly scattered from the strongest heterogeneities. The imaging method is applied to a relatively small area (20 x 20 km), this choice being justified by the small length of the analyzed codas of the low magnitude earthquakes. I apply the unmodified Nishigami’s method to the volcanic area of Campi Flegrei and compare the results with the other tomographies done in the same area. The scattering images, obtained with frequency waves around 18 Hz, show the presence of high scatterers in correspondence with the submerged caldera rim in the southern part of the Pozzuoli bay. Strong scattering is also found below the Solfatara crater, characterized by the presence of densely fractured, fluid-filled rocks and by a strong thermal anomaly. The modified Nishigami’s technique is applied to the Mt. Vesuvius area. Results show a low scattering area just below the central cone and a high scattering area around it. The high scattering zone seems to be due to the contrast between the high rigidity body located beneath the crater and the low rigidity materials located around it. The central low scattering area overlaps the hydrothermal reservoirs located below the central cone. An interpretation of the results in terms of geological properties of the medium is also supplied, aiming to find a correspondence of the scattering properties and the geological nature of the material. A complementary result reported in this thesis is that the strong heterogeneity of the volcanic medium create a phenomenon called "coda localization". It has been verified that the shape of the seismograms recorded from the stations located at the top of the volcanic edifice of Mt. Vesuvius is different from the shape of the seismograms recorded at the bottom. This behavior is justified by the consideration that the coda energy is not uniformly distributed within a region surrounding the source for great lapse time.

Application of Pulsed Electric Fields for the Modulation of Chemico-Physical Properties of Different Foods

Pulsed electric field technology is one of the most attractive new non-thermal technology thanks to its lower energy consumption and short treatment times. It consists of an electric treatment of short duration (from several ns to several ms) with electric field strengths from 0.1 to 80 kV/cm that lead to an increase in the permeability of the cell membrane. In this PhD thesis, PEF technology was investigated with the aim of improving mass transfer in plant and animal foods by using it alone or in combination with conventional food processes. Different methods of evaluating electroporation for optimizing PEF processing parameters were investigated. In this respect, the degree of membrane permeabilization in plant and animal food matrices was investigated using electrical impedance spectroscopy, current-voltage measurements and magnetic resonance imaging. The research findings provided useful insights and calls for critical choice of electroporation assessment methods for the selection of adequate PEF treatment conditions. It was outlined that the effect of electroporation is highly dependent on the properties of the food matrix and secondary phenomena occurring in the cell structure undergoing PEF treatment, such as the water re-distribution in the tissue due to the exchange of fluids between intra- and extra-cellular environments. This study also confirmed the great potential of combining PEF technology with conventional food processes, with the main purpose of improving the quality of the food material and accelerating the kinetics of mass transfers, in both plant and animal tissues. Consistent reduction of acrylamide formation in potato crisps was achieved by monitoring key PEF process parameters and subsequent manufacturing steps. Kiwifruit snacks showed a significant reduction in drying kinetics when pre-treated with PEF, while their quality was well maintained. Finally, the research results showed that PEF pre-treatments can shorten the brine process as well as the rehydration kinetics of fish muscles.