Genotypic variation in Actinidia deliciosa fruit size and carbohydrate content

In a global and increasingly competitive fresh produce market, more attention is being given to fruit quality traits and consumer satisfaction. Kiwifruit occupies a niche position in the worldwide market, when compared to apples, oranges or bananas. It is a fruit with extraordinarily good nutritional traits, and its benefits to human health have been widely described. Until recently, international trade in kiwifruit was restricted to a single cultivar, but different types of kiwifruit are now becoming available in the market. Effective programmes of kiwifruit improvement start by considering the requirements of consumers, and recent surveys indicate that sweeter fruit with better flavour are generally preferred. There is a strong correlation between at-harvest dry matter and starch content, and soluble solid concentration and flavour when fruit are eating ripe. This suggests that carbon accumulation strongly influences the development of kiwifruit taste. The overall aim of the present study was to determine what factors affect carbon accumulation during Actinidia deliciosa berry development. One way of doing this is by comparing kiwifruit genotypes that differ greatly in their ability to accumulate dry matter in their fruit. Starch is the major component of dry matter content. It was hypothesized that genotypes were different in sink strength. Sink strength, by definition, is the effect of sink size and sink activity. Chapter 1 reviews fruit growth, kiwifruit growth and development and carbon metabolism. Chapter 2 describes the materials and methods used. Chapter 3, 4, 5 and 6 describes different types of experimental work. Chapter 7 contains the final discussions and the conclusions Three Actinidia deliciosa breeding populations were analysed in detail to confirm that observed differences in dry matter content were genetically determined. Fruit of the different genotypes differed in dry matter content mainly because of differences in starch concentrations and dry weight accumulation rates, irrespective of fruit size. More detailed experiments were therefore carried out on genotypes which varied most in fruit starch concentrations to determine why sink strengths were so different. The kiwifruit berry comprises three tissues which differ in dry matter content. It was initially hypothesised that observed differences in starch content could be due to a larger proportion of one or other of these tissues, for example, of the central core which is highest in dry matter content. The study results showed that this was not the case. Sink size, intended as cell number or cell size, was then investigated. The outer pericarp makes up about 60% of berry weight in ‘Hayward’ kiwifruit. The outer pericarp contains two types of parenchyma cells: large cells with low starch concentration, and small cells with high starch concentration. Large cell, small cell and total cell densities in the outer pericarp were shown to be not correlated with either dry matter content or fruit size but further investigation of volume proportion among cell types seemed justified. It was then shown that genotypes with fruit having higher dry matter contents also had a higher proportion of small cells. However, the higher proportion of small cell volume could only explain half of the observed differences in starch content. So, sink activity, intended as sucrose to starch metabolism, was investigated. In transiently starch storing sinks, such as tomato fruit and potato tubers, a pivotal role in carbon metabolism has been attributed to sucrose cleaving enzymes (mainly sucrose synthase and cell wall invertase) and to ADP-glucose pyrophosphorylase (the committed step in starch synthesis). Studies on tomato and potato genotypes differing in starch content or in final fruit soluble solid concentrations have demonstrated a strong link with either sucrose synthase or ADP-glucose pyrophosphorylase, at both enzyme activity and gene expression levels, depending on the case. Little is known about sucrose cleaving enzyme and ADP-glucose pyrophosphorylase isoforms. The HortResearch Actinidia EST database was then screened to identify sequences putatively encoding for sucrose synthase, invertase and ADP-glucose pyrophosphorylase isoforms and specific primers were designed. Sucrose synthase, invertase and ADP-glucose pyrophosphorylase isoform transcript levels were anlayzed throughout fruit development of a selection of four genotypes (two high dry matter and two low dry matter). High dry matter genotypes showed higher amounts of sucrose synthase transcripts (SUS1, SUS2 or both) and higher ADP-glucose pyrophosphorylase (AGPL4, large subunit 4) gene expression, mainly early in fruit development. SUS1- like gene expression has been linked with starch biosynthesis in several crop (tomato, potato and maize). An enhancement of its transcript level early in fruit development of high dry matter genotypes means that more activated glucose (UDP-glucose) is available for starch synthesis. This can be then correlated to the higher starch observed since soon after the onset of net starch accumulation. The higher expression level of AGPL4 observed in high dry matter genotypes suggests an involvement of this subunit in drive carbon flux into starch. Changes in both enzymes (SUSY and AGPse) are then responsible of higher starch concentrations. Low dry matter genotypes showed generally higher vacuolar invertase gene expression (and also enzyme activity), early in fruit development. This alternative cleavage strategy can possibly contribute to energy loss, in that invertases’ products are not adenylated, and further reactions and transport are needed to convert carbon into starch. Although these elements match well with observed differences in starch contents, other factors could be involved in carbon metabolism control. From the microarray experiment, in fact, several kinases and transcription factors have been found to be differentially expressed. Sink strength is known to be modified by application of regulators. In ‘Hayward’ kiwifruit, the synthetic cytokinin CPPU (N-(2-Chloro-4-Pyridyl)-N-Phenylurea) promotes a dramatic increase in fruit size, whereas dry matter content decreases. The behaviour of CPPU-treated ‘Hayward’ kiwifruit was similar to that of fruit from low dry matter genotypes: dry matter and starch concentrations were lower. However, the CPPU effect was strongly source limited, whereas in genotype variation it was not. Moreover, CPPU-treated fruit gene expression (at sucrose cleavage and AGPase levels) was similar to that in high dry matter genotypes. It was therefore concluded that CPPU promotes both sink size and sink activity, but at different “speeds” and this ends in the observed decrease in dry matter content and starch concentration. The lower “speed” in sink activity is probably due to a differential partitioning of activated glucose between starch storage and cell wall synthesis to sustain cell expansion. Starch is the main carbohydrate accumulated in growing Actinidia deliciosa fruit. Results obtained in the present study suggest that sucrose synthase and AGPase enzymes contribute to sucrose to starch conversion, and differences in their gene expression levels, mainly early in fruit development, strongly affect the rate at which starch is therefore accumulated. This results are interesting in that starch and Actinidia deliciosa fruit quality are tightly connected.

Multiwavelenght study of cluster mergers and consequences for the radio emission properties of galaxy clusters

In the present thesis a thourough multiwavelength analysis of a number of galaxy clusters known to be experiencing a merger event is presented. The bulk of the thesis consists in the analysis of deep radio observations of six merging clusters, which host extended radio emission on the cluster scale. A composite optical and X–ray analysis is performed in order to obtain a detailed and comprehensive picture of the cluster dynamics and possibly derive hints about the properties of the ongoing merger, such as the involved mass ratio, geometry and time scale. The combination of the high quality radio, optical and X–ray data allows us to investigate the implications of the ongoing merger for the cluster radio properties, focusing on the phenomenon of cluster scale diffuse radio sources, known as radio halos and relics. A total number of six merging clusters was selected for the present study: A3562, A697, A209, A521, RXCJ 1314.4–2515 and RXCJ 2003.5–2323. All of them were known, or suspected, to possess extended radio emission on the cluster scale, in the form of a radio halo and/or a relic. High sensitivity radio observations were carried out for all clusters using the Giant Metrewave Radio Telescope (GMRT) at low frequency (i.e. ≤ 610 MHz), in order to test the presence of a diffuse radio source and/or analyse in detail the properties of the hosted extended radio emission. For three clusters, the GMRT information was combined with higher frequency data from Very Large Array (VLA) observations. A re–analysis of the optical and X–ray data available in the public archives was carried out for all sources. Propriety deep XMM–Newton and Chandra observations were used to investigate the merger dynamics in A3562. Thanks to our multiwavelength analysis, we were able to confirm the existence of a radio halo and/or a relic in all clusters, and to connect their properties and origin to the reconstructed merging scenario for most of the investigated cases. • The existence of a small size and low power radio halo in A3562 was successfully explained in the theoretical framework of the particle re–acceleration model for the origin of radio halos, which invokes the re–acceleration of pre–existing relativistic electrons in the intracluster medium by merger–driven turbulence. • A giant radio halo was found in the massive galaxy cluster A209, which has likely undergone a past major merger and is currently experiencing a new merging process in a direction roughly orthogonal to the old merger axis. A giant radio halo was also detected in A697, whose optical and X–ray properties may be suggestive of a strong merger event along the line of sight. Given the cluster mass and the kind of merger, the existence of a giant radio halo in both clusters is expected in the framework of the re–acceleration scenario. • A radio relic was detected at the outskirts of A521, a highly dynamically disturbed cluster which is accreting a number of small mass concentrations. A possible explanation for its origin requires the presence of a merger–driven shock front at the location of the source. The spectral properties of the relic may support such interpretation and require a Mach number M < ∼ 3 for the shock. • The galaxy cluster RXCJ 1314.4–2515 is exceptional and unique in hosting two peripheral relic sources, extending on the Mpc scale, and a central small size radio halo. The existence of these sources requires the presence of an ongoing energetic merger. Our combined optical and X–ray investigation suggests that a strong merging process between two or more massive subclumps may be ongoing in this cluster. Thanks to forthcoming optical and X–ray observations, we will reconstruct in detail the merger dynamics and derive its energetics, to be related to the energy necessary for the particle re–acceleration in this cluster. • Finally, RXCJ 2003.5–2323 was found to possess a giant radio halo. This source is among the largest, most powerful and most distant (z=0.317) halos imaged so far. Unlike other radio halos, it shows a very peculiar morphology with bright clumps and filaments of emission, whose origin might be related to the relatively high redshift of the hosting cluster. Although very little optical and X–ray information is available about the cluster dynamical stage, the results of our optical analysis suggest the presence of two massive substructures which may be interacting with the cluster. Forthcoming observations in the optical and X–ray bands will allow us to confirm the expected high merging activity in this cluster. Throughout the present thesis a cosmology with H0 = 70 km s−1 Mpc−1, m=0.3 and =0.7 is assumed.

Study of silicon-on-insulator multiple-gate MOS structures including band-gap engineering and self heating effects

The progresses of electron devices integration have proceeded for more than 40 years following the well–known Moore’s law, which states that the transistors density on chip doubles every 24 months. This trend has been possible due to the downsizing of the MOSFET dimensions (scaling); however, new issues and new challenges are arising, and the conventional ”bulk” architecture is becoming inadequate in order to face them. In order to overcome the limitations related to conventional structures, the researchers community is preparing different solutions, that need to be assessed. Possible solutions currently under scrutiny are represented by: • devices incorporating materials with properties different from those of silicon, for the channel and the source/drain regions; • new architectures as Silicon–On–Insulator (SOI) transistors: the body thickness of Ultra-Thin-Body SOI devices is a new design parameter, and it permits to keep under control Short–Channel–Effects without adopting high doping level in the channel. Among the solutions proposed in order to overcome the difficulties related to scaling, we can highlight heterojunctions at the channel edge, obtained by adopting for the source/drain regions materials with band–gap different from that of the channel material. This solution allows to increase the injection velocity of the particles travelling from the source into the channel, and therefore increase the performance of the transistor in terms of provided drain current. The first part of this thesis work addresses the use of heterojunctions in SOI transistors: chapter 3 outlines the basics of the heterojunctions theory and the adoption of such approach in older technologies as the heterojunction–bipolar–transistors; moreover the modifications introduced in the Monte Carlo code in order to simulate conduction band discontinuities are described, and the simulations performed on unidimensional simplified structures in order to validate them as well. Chapter 4 presents the results obtained from the Monte Carlo simulations performed on double–gate SOI transistors featuring conduction band offsets between the source and drain regions and the channel. In particular, attention has been focused on the drain current and to internal quantities as inversion charge, potential energy and carrier velocities. Both graded and abrupt discontinuities have been considered. The scaling of devices dimensions and the adoption of innovative architectures have consequences on the power dissipation as well. In SOI technologies the channel is thermally insulated from the underlying substrate by a SiO2 buried–oxide layer; this SiO2 layer features a thermal conductivity that is two orders of magnitude lower than the silicon one, and it impedes the dissipation of the heat generated in the active region. Moreover, the thermal conductivity of thin semiconductor films is much lower than that of silicon bulk, due to phonon confinement and boundary scattering. All these aspects cause severe self–heating effects, that detrimentally impact the carrier mobility and therefore the saturation drive current for high–performance transistors; as a consequence, thermal device design is becoming a fundamental part of integrated circuit engineering. The second part of this thesis discusses the problem of self–heating in SOI transistors. Chapter 5 describes the causes of heat generation and dissipation in SOI devices, and it provides a brief overview on the methods that have been proposed in order to model these phenomena. In order to understand how this problem impacts the performance of different SOI architectures, three–dimensional electro–thermal simulations have been applied to the analysis of SHE in planar single and double–gate SOI transistors as well as FinFET, featuring the same isothermal electrical characteristics. In chapter 6 the same simulation approach is extensively employed to study the impact of SHE on the performance of a FinFET representative of the high–performance transistor of the 45 nm technology node. Its effects on the ON–current, the maximum temperatures reached inside the device and the thermal resistance associated to the device itself, as well as the dependence of SHE on the main geometrical parameters have been analyzed. Furthermore, the consequences on self–heating of technological solutions such as raised S/D extensions regions or reduction of fin height are explored as well. Finally, conclusions are drawn in chapter 7.

Optical Design for Automatic Identification and Portable Systems

This thesis proposes design methods and test tools, for optical systems, which may be used in an industrial environment, where not only precision and reliability but also ease of use is important. The approach to the problem has been conceived to be as general as possible, although in the present work, the design of a portable device for automatic identification applications has been studied, because this doctorate has been funded by Datalogic Scanning Group s.r.l., a world-class producer of barcode readers. The main functional components of the complete device are: electro-optical imaging, illumination and pattern generator systems. For what concerns the electro-optical imaging system, a characterization tool and an analysis one has been developed to check if the desired performance of the system has been achieved. Moreover, two design tools for optimizing the imaging system have been implemented. The first optimizes just the core of the system, the optical part, improving its performance ignoring all other contributions and generating a good starting point for the optimization of the whole complex system. The second tool optimizes the system taking into account its behavior with a model as near as possible to reality including optics, electronics and detection. For what concerns the illumination and the pattern generator systems, two tools have been implemented. The first allows the design of free-form lenses described by an arbitrary analytical function exited by an incoherent source and is able to provide custom illumination conditions for all kind of applications. The second tool consists of a new method to design Diffractive Optical Elements excited by a coherent source for large pattern angles using the Iterative Fourier Transform Algorithm. Validation of the design tools has been obtained, whenever possible, comparing the performance of the designed systems with those of fabricated prototypes. In other cases simulations have been used.

Integrated analysis and design of optimization and up-scaling of inductively coupled plasma synthesis of nanoparticles

This study is focused on radio-frequency inductively coupled thermal plasma (ICP) synthesis of nanoparticles, combining experimental and modelling approaches towards process optimization and industrial scale-up, in the framework of the FP7-NMP SIMBA European project (Scaling-up of ICP technology for continuous production of Metallic nanopowders for Battery Applications). First the state of the art of nanoparticle production through conventional and plasma routes is summarized, then results for the characterization of the plasma source and on the investigation of the nanoparticle synthesis phenomenon, aiming at highlighting fundamental process parameters while adopting a design oriented modelling approach, are presented. In particular, an energy balance of the torch and of the reaction chamber, employing a calorimetric method, is presented, while results for three- and two-dimensional modelling of an ICP system are compared with calorimetric and enthalpy probe measurements to validate the temperature field predicted by the model and used to characterize the ICP system under powder-free conditions. Moreover, results from the modeling of critical phases of ICP synthesis process, such as precursor evaporation, vapour conversion in nanoparticles and nanoparticle growth, are presented, with the aim of providing useful insights both for the design and optimization of the process and on the underlying physical phenomena. Indeed, precursor evaporation, one of the phases holding the highest impact on industrial feasibility of the process, is discussed; by employing models to describe particle trajectories and thermal histories, adapted from the ones originally developed for other plasma technologies or applications, such as DC non-transferred arc torches and powder spherodization, the evaporation of micro-sized Si solid precursor in a laboratory scale ICP system is investigated. Finally, a discussion on the role of thermo-fluid dynamic fields on nano-particle formation is presented, as well as a study on the effect of the reaction chamber geometry on produced nanoparticle characteristics and process yield.

Spatial and temporal characterisation of ground deformation recorded by geodetic techniques

A critical point in the analysis of ground displacements time series is the development of data driven methods that allow the different sources that generate the observed displacements to be discerned and characterised. A widely used multivariate statistical technique is the Principal Component Analysis (PCA), which allows reducing the dimensionality of the data space maintaining most of the variance of the dataset explained. Anyway, PCA does not perform well in finding the solution to the so-called Blind Source Separation (BSS) problem, i.e. in recovering and separating the original sources that generated the observed data. This is mainly due to the assumptions on which PCA relies: it looks for a new Euclidean space where the projected data are uncorrelated. The Independent Component Analysis (ICA) is a popular technique adopted to approach this problem. However, the independence condition is not easy to impose, and it is often necessary to introduce some approximations. To work around this problem, I use a variational bayesian ICA (vbICA) method, which models the probability density function (pdf) of each source signal using a mix of Gaussian distributions. This technique allows for more flexibility in the description of the pdf of the sources, giving a more reliable estimate of them. Here I present the application of the vbICA technique to GPS position time series. First, I use vbICA on synthetic data that simulate a seismic cycle (interseismic + coseismic + postseismic + seasonal + noise) and a volcanic source, and I study the ability of the algorithm to recover the original (known) sources of deformation. Secondly, I apply vbICA to different tectonically active scenarios, such as the 2009 L'Aquila (central Italy) earthquake, the 2012 Emilia (northern Italy) seismic sequence, and the 2006 Guerrero (Mexico) Slow Slip Event (SSE).

Contaminants of emerging concern in drinking water: assessment of the effectiveness of removal by drinking water treatments and possible risks to human health

Contaminants of emerging concern are increasingly detected in the water cycle, with endocrine-disrupting chemicals (EDCs) receiving attention due to their potential to cause adverse health effects even at low concentrations. Although the EU has recently introduced some EDCs into drinking water legislation, most drinking water treatment plants (DWTPs) are not designed to remove EDCs, making their detection and removal in DWTPs an important challenge. The aim of this doctoral project was to investigate hormones and phenolic compounds as suspected EDCs in drinking waters across the Romagna area (Italy). The main objectives were to assess the occurrence of considered contaminants in source and drinking water from three DWTPs, characterize the effectiveness of removal by different water treatment processes, and evaluate the potential biological impact on drinking water and human health. Specifically, a complementary approach of target chemical analysis and effect-based methods was adopted to explore drinking water quality, treatment efficacy, and biological potential. This study found that nonylphenol (NP) was prevalent in all samples, followed by BPA. Sporadic contamination of hormones was found only in source waters. Although the measured EDC concentrations in drinking water did not exceed threshold guideline values, the potential role of DWTPs as an additional source of EDC contamination should be considered. Significant increases in BPA and NP levels were observed during water treatment steps, which were also reflected in estrogenic and mutagenic responses in water samples after the ultrafiltration. This highlights the need to monitor water quality during various treatment processes to improve the efficiency of DWTPs. Biological assessments on finished water did not reveal any bioactivity, except for few treated water samples that exhibited estrogenic responses. Overall, the data emphasize the high quality of produced drinking water and the value of applying integrated chemical analysis and in vitro bioassays for water quality assessment.

The cosmic ray tagger of the ICARUS detector: construction, commissioning and performances in the first physics run

The Short Baseline Neutrino Program at Fermilab aims to confirm or definitely rule out the existence of sterile neutrinos at the eV mass scale. The program will perform the most sensitive search in both the nue appearance and numu disappearance channels along the Booster Neutrino Beamline. The far detector, ICARUS-T600, is a high-granularity Liquid Argon Time Projection Chamber located at 600 m from the Booster neutrino source and at shallow depth, thus exposed to a large flux of cosmic particles. Additionally, ICARUS is located 6 degrees off axis with respect to the Neutrino beam from the Main Injector. This thesis presents the construction, installation and commissioning of the ICARUS Cosmic Ray Tagger system, providing a 4 pi coverage of the active liquid argon volume. By exploiting only the precise nanosecond scale synchronization of the cosmic tagger and the PMT optical flashes it is possible to determine if an event was likely triggered by a cosmic particle. The results show that using the Top Cosmic Ray Tagger alone a conservative rejection larger than 65% of the cosmic induced background can be achieved. Additionally, by requiring the absence of hits in the whole cosmic tagger system it is possible to perform a pre-selection of contained neutrino events ahead of the full event reconstruction.

Retrieval of trace gases vertical profile in the lower atmosphere combining. Differential Optical Absorption Spectroscopy with radiative transfer models

The motivation for the work presented in this thesis is to retrieve profile information for the atmospheric trace constituents nitrogen dioxide (NO2) and ozone (O3) in the lower troposphere from remote sensing measurements. The remote sensing technique used, referred to as Multiple AXis Differential Optical Absorption Spectroscopy (MAX-DOAS), is a recent technique that represents a significant advance on the well-established DOAS, especially for what it concerns the study of tropospheric trace consituents. NO2 is an important trace gas in the lower troposphere due to the fact that it is involved in the production of tropospheric ozone; ozone and nitrogen dioxide are key factors in determining the quality of air with consequences, for example, on human health and the growth of vegetation. To understand the NO2 and ozone chemistry in more detail not only the concentrations at ground but also the acquisition of the vertical distribution is necessary. In fact, the budget of nitrogen oxides and ozone in the atmosphere is determined both by local emissions and non-local chemical and dynamical processes (i.e. diffusion and transport at various scales) that greatly impact on their vertical and temporal distribution: thus a tool to resolve the vertical profile information is really important. Useful measurement techniques for atmospheric trace species should fulfill at least two main requirements. First, they must be sufficiently sensitive to detect the species under consideration at their ambient concentration levels. Second, they must be specific, which means that the results of the measurement of a particular species must be neither positively nor negatively influenced by any other trace species simultaneously present in the probed volume of air. Air monitoring by spectroscopic techniques has proven to be a very useful tool to fulfill these desirable requirements as well as a number of other important properties. During the last decades, many such instruments have been developed which are based on the absorption properties of the constituents in various regions of the electromagnetic spectrum, ranging from the far infrared to the ultraviolet. Among them, Differential Optical Absorption Spectroscopy (DOAS) has played an important role. DOAS is an established remote sensing technique for atmospheric trace gases probing, which identifies and quantifies the trace gases in the atmosphere taking advantage of their molecular absorption structures in the near UV and visible wavelengths of the electromagnetic spectrum (from 0.25 μm to 0.75 μm). Passive DOAS, in particular, can detect the presence of a trace gas in terms of its integrated concentration over the atmospheric path from the sun to the receiver (the so called slant column density). The receiver can be located at ground, as well as on board an aircraft or a satellite platform. Passive DOAS has, therefore, a flexible measurement configuration that allows multiple applications. The ability to properly interpret passive DOAS measurements of atmospheric constituents depends crucially on how well the optical path of light collected by the system is understood. This is because the final product of DOAS is the concentration of a particular species integrated along the path that radiation covers in the atmosphere. This path is not known a priori and can only be evaluated by Radiative Transfer Models (RTMs). These models are used to calculate the so called vertical column density of a given trace gas, which is obtained by dividing the measured slant column density to the so called air mass factor, which is used to quantify the enhancement of the light path length within the absorber layers. In the case of the standard DOAS set-up, in which radiation is collected along the vertical direction (zenith-sky DOAS), calculations of the air mass factor have been made using “simple” single scattering radiative transfer models. This configuration has its highest sensitivity in the stratosphere, in particular during twilight. This is the result of the large enhancement in stratospheric light path at dawn and dusk combined with a relatively short tropospheric path. In order to increase the sensitivity of the instrument towards tropospheric signals, measurements with the telescope pointing the horizon (offaxis DOAS) have to be performed. In this circumstances, the light path in the lower layers can become very long and necessitate the use of radiative transfer models including multiple scattering, the full treatment of atmospheric sphericity and refraction. In this thesis, a recent development in the well-established DOAS technique is described, referred to as Multiple AXis Differential Optical Absorption Spectroscopy (MAX-DOAS). The MAX-DOAS consists in the simultaneous use of several off-axis directions near the horizon: using this configuration, not only the sensitivity to tropospheric trace gases is greatly improved, but vertical profile information can also be retrieved by combining the simultaneous off-axis measurements with sophisticated RTM calculations and inversion techniques. In particular there is a need for a RTM which is capable of dealing with all the processes intervening along the light path, supporting all DOAS geometries used, and treating multiple scattering events with varying phase functions involved. To achieve these multiple goals a statistical approach based on the Monte Carlo technique should be used. A Monte Carlo RTM generates an ensemble of random photon paths between the light source and the detector, and uses these paths to reconstruct a remote sensing measurement. Within the present study, the Monte Carlo radiative transfer model PROMSAR (PROcessing of Multi-Scattered Atmospheric Radiation) has been developed and used to correctly interpret the slant column densities obtained from MAX-DOAS measurements. In order to derive the vertical concentration profile of a trace gas from its slant column measurement, the AMF is only one part in the quantitative retrieval process. One indispensable requirement is a robust approach to invert the measurements and obtain the unknown concentrations, the air mass factors being known. For this purpose, in the present thesis, we have used the Chahine relaxation method. Ground-based Multiple AXis DOAS, combined with appropriate radiative transfer models and inversion techniques, is a promising tool for atmospheric studies in the lower troposphere and boundary layer, including the retrieval of profile information with a good degree of vertical resolution. This thesis has presented an application of this powerful comprehensive tool for the study of a preserved natural Mediterranean area (the Castel Porziano Estate, located 20 km South-West of Rome) where pollution is transported from remote sources. Application of this tool in densely populated or industrial areas is beginning to look particularly fruitful and represents an important subject for future studies.

Indagine sulla nozione di fatto urbano ne L'architettura della città di Aldo Rossi

Questa tesi di dottorato di ricerca ha come oggetto la nozione di fatto urbano elaborata e presentata da Aldo Rossi nel libro L’architettura della città edito nel 1966. Ne L’architettura della città sono molteplici le definizioni e le forme con cui è enunciata la nozione di fatto urbano. Nel corso della tesi si è indagato come la costruzione nel tempo di questo concetto è stata preceduta da diversi studi giovanili intrapresi dal 1953, poi riorganizzati e sintetizzati a partire dal 1963 in un quaderno manoscritto dal titolo “Manuale di urbanistica”, in diversi appunti e in due quaderni manoscritti. Il lavoro di ricerca ha ricostruito la formulazione della nozione di fatto urbano attraverso gli scritti di Rossi. In questa direzione la rilevazione della partecipazione di Rossi a dibattiti, seminari, riviste, corsi universitari o ricerche accademiche è apparsa di fondamentale importanza, per comprendere la complessità di un lavoro non riconducibile a dei concetti disciplinari, ma alla formazione di una teoria trasmissibile. Il tentativo di comprendere e spiegare la nozione di fatto urbano ha condotto ad esaminare l’accezione con cui Rossi compone L’architettura della città, che egli stesso assimila ad un trattato. L’analisi ha identificato come la composizione del libro non è direttamente riferibile ad un uso classico della stesura editoriale del trattato, la quale ha tra i riferimenti più noti nel passato la promozione di una pratica corretta come nel caso vitruviano o un’impalcatura instauratrice di una nuova categoria come nel caso dell’Alberti. La mancanza di un sistema globale e prescrittivo a differenza dei due libri fondativi e il rimando non immediato alla stesura di un trattato classico è evidente ne L’architettura della città. Tuttavia la possibilità di condurre la ricerca su una serie di documenti inediti ha permesso di rilevare come negli scritti a partire dal 1953, sia maturata una trattazione delle questioni centrali alla nozione di fatto urbano ricca di intuizioni, che aspirano ad un’autonomia, sintetizzate, seppure in modo non sistematico, nella stesura del celebre libro. Si è così cercato di mettere in luce la precisazione nel tempo della nozione di fatto urbano e della sua elaborazione nei molteplici scritti antecedenti la pubblicazione de L’architettura della città, precisando come Rossi, pur costruendo su basi teoriche la nozione di fatto urbano, ne indichi una visione progressiva, ossia un uso operativo sulla città. La ricerca si è proposta come obiettivo di comprendere le radici culturali della nozione di fatto urbano sia tramite un’esplorazione degli interessi di Rossi nel suo percorso formativo sia rispetto alla definizione della struttura materiale del fatto urbano che Rossi individua nelle permanenze e che alimenta nella sua definizione con differenti apporti derivanti da altre discipline. Compito di questa ricerca è stato rileggere criticamente il percorso formativo compiuto da Rossi, a partire dal 1953, sottolinearne gli ambiti innovativi e precisarne i limiti descrittivi che non vedranno mai la determinazione di una nozione esatta, ma piuttosto la strutturazione di una sintesi complessa e ricca di riferimenti ad altri studi. In sintesi la tesi si compone di tre parti: 1. la prima parte, dal titolo “La teoria dei fatti urbani ne L’architettura della città”, analizza il concetto di fatto urbano inserendolo all’interno del più generale contesto teorico contenuto nel libro L’architettura della città. Questo avviene tramite la scomposizione del libro, la concatenazione delle sue argomentazioni e la molteplicità delle fonti esplicitamente citate da Rossi. In questo ambito si precisa la struttura del libro attraverso la rilettura dei riferimenti serviti a Rossi per comporre il suo progetto teorico. Inoltre si ripercorre la sua vita attraverso le varie edizioni, le ristampe, le introduzioni e le illustrazioni. Infine si analizza il ruolo del concetto di fatto urbano nel libro rilevando come sia posto in un rapporto paritetico con il titolo del libro, conseguendone un’accezione di «fatto da osservare» assimilabile all’uso proposto dalla geografia urbana francese dei primi del Novecento. 2. la seconda parte, dal titolo “La formazione della nozione di fatto urbano 1953-66”, è dedicata alla presentazione dell’elaborazione teorica negli scritti di Rossi prima de L’architettura della città, ossia dal 1953 al 1966. Questa parte cerca di descrivere le radici culturali di Rossi, le sue collaborazioni e i suoi interessi ripercorrendo la progressiva definizione della concezione di città nel tempo. Si è analizzato il percorso maturato da Rossi e i documenti scritti fin dagli anni in cui era studente alla Facoltà di Architettura Politecnico di Milano. Emerge un quadro complesso in cui i primi saggi, gli articoli e gli appunti testimoniano una ricerca intellettuale tesa alla costruzione di un sapere sullo sfondo del realismo degli anni Cinquanta. Rossi matura infatti un impegno culturale che lo porta dopo la laurea ad affrontare discorsi più generali sulla città. In particolare la sua importante collaborazione con la rivista Casabella-continuità, con il suo direttore Ernesto Nathan Rogers e tutto il gruppo redazionale segnano il periodo successivo in cui compare l’interesse per la letteratura urbanistica, l’arte, la sociologia, la geografia, l’economia e la filosofia. Seguono poi dal 1963 gli anni di lavoro insieme al gruppo diretto da Carlo Aymonino all’Istituto Universitario di Architettura di Venezia, e in particolare le ricerche sulla tipologia edilizia e la morfologia urbana, che portano Rossi a compiere una sintesi analitica per la fondazione di una teoria della città. Dall’indagine si rileva infatti come gli scritti antecedenti L’architettura della città sviluppano lo studio dei fatti urbani fino ad andare a costituire il nucleo teorico di diversi capitoli del libro. Si racconta così la genesi del libro, la cui scrittura si è svolta nell’arco di due anni, e le aspirazioni che hanno portato quello che era stato concepito come un “manuale d’urbanistica” a divenire quello che Rossi definirà “l’abbozzo di un trattato” per la formulazione di una scienza urbana. 3. la terza parte, dal titolo “La struttura materiale dei fatti urbani: la teoria della permanenza”, indaga monograficamente lo studio della città come un fatto materiale, un manufatto, la cui costruzione è avvenuta nel tempo e del tempo mantiene le tracce. Sul tema della teoria della permanenza è stato importante impostare un confronto con il dibattito vivo negli anni della ricostruzione dopo la guerra intorno ai temi delle preesistenze ambientali nella ricostruzione negli ambienti storici. Sono emersi fin da subito importanti la relazione con Ernesto Nathan Rogers, le discussioni sulle pagine di Casabella-Continuità, la partecipazione ad alcuni dibatti e ricerche. Si è inoltre Rilevato l’uso di diversi termini mutuati dalle tesi filosofiche di alcune personalità come Antonio Banfi e Enzo Paci, poi elaborati dal nucleo redazionale di Casabella-Continuità, di cui faceva parte anche Rossi. Sono così emersi alcuni spostamenti di senso e la formulazione di un vocabolario di termini all’interno della complessa vicenda della cultura architettonica degli anni Cinquanta e Sessanta. 1. Si è poi affrontato questo tema analizzando le forme con cui Rossi presenta la definizione della teoria della permanenza e i contributi desunti da alcuni autori per la costruzione scientifica di una teoria dell’architettura, il cui fine è quello di essere trasmissibile e di offrire strumenti di indagine concreti. Questa ricerca ha permesso di ipotizzare come il lavoro dei geografi francesi della prima metà del XX secolo, e in particolare il contributo più rilevante di Marcel Poëte e di Pierre Lavedan, costituiscono le fonti principali e il campo d’indagine maggiormente esplorato da Rossi per definire la teoria della permanenza e i monumenti. Le permanenze non sono dunque presentate ne L’architettura della città come il “tutto”, ma emergono da un metodo che sceglie di isolare i fatti urbani permanenti, consentendo così di compiere un’ipotesi su “ciò che resta” dopo le trasformazioni continue che operano nella città. Le fonti su cui ho lavorato sono state quelle annunciate da Rossi ne L’architettura della città, e più precisamente i testi nelle edizioni da lui consultate. Anche questo lavoro ha permesso un confronto dei testi che ha fatto emergere ne L’architettura della città l’uso di termini mutuati da linguaggi appartenenti ad altre discipline e quale sia l’uso di concetti estrapolati nella loro interezza. Presupposti metodologici Della formulazione della nozione di fatto urbano si sono indagate l’originalità dell’espressione, le connessioni presunte o contenute negli studi di Rossi sulla città attraverso la raccolta di fonti dirette e indirette che sono andate a formare un notevole corpus di scritti. Le fonti dirette più rilevanti sono state trovare nelle collezioni speciali del Getty Research Institute di Los Angeles in cui sono conservati gli Aldo Rossi Papers, questo archivio comprende materiali inediti dal 1954 al 1988. La natura dei materiali si presenta sotto forma di manoscritti, dattiloscritti, quaderni, documenti ciclostilati, appunti sparsi e una notevole quantità di corrispondenza. Negli Aldo Rossi Papers si trovano anche 32 dei 47 Quaderni Azzurri, le bozze de L’architettura della città e dell’ Autobiografia Scientifica. Per quanto riguarda in particolare L’architettura della città negli Aldo Rossi Papers sono conservati: un quaderno con il titolo “Manuale d’urbanistica, giugno 1963”, chiara prima bozza del libro, degli “Appunti per libro urbanistica estate/inverno 1963”, un quaderno con la copertina rossa datato 20 settembre 1964-8 agosto 1965 e un quaderno con la copertina blu datato 30 agosto 1965-15 dicembre 1965. La possibilità di accedere a questo archivio ha permesso di incrementare la bibliografia relativa agli studi giovanili consentendo di rileggere il percorso culturale in cui Rossi si è formato. E’ così apparsa fondamentale la rivalutazione di alcune questioni relative al realismo socialista che hanno portato a formare un più preciso quadro dei primi scritti di Rossi sullo sfondo di un complesso scenario intellettuale. A questi testi si è affiancata la raccolta delle ricerche universitarie, degli articoli pubblicati su riviste specializzate e degli interventi a dibattiti e seminari. A proposito de L’architettura della città si è raccolta un’ampia letteratura critica riferita sia al testo in specifico che ad una sua collocazione nella storia dell’architettura, mettendo in discussione alcune osservazioni che pongono L’architettura della città come un libro risolutivo e definitivo. Per quanto riguarda il capitolo sulla teoria della permanenza l’analisi è stata svolta a partire dai testi che Rossi stesso indicava ne L’architettura della città rivelando i diversi apporti della letteratura urbanistica francese, e permettendo alla ricerca di precisare le relazioni con alcuni scritti centrali e al contempo colti da Rossi come opportunità per intraprendere l’elaborazione dell’idea di tipo. Per quest’ultima parte si può precisare come Rossi formuli la sua idea di tipo in un contesto culturale dove l’interesse per questo tema era fondamentale. Dunque le fonti che hanno assunto maggior rilievo in quest’ultima fase emergono da un ricco panorama in cui Rossi compie diverse ricerche sia con il gruppo redazionale di Casabella-continuità, sia all’interno della scuola veneziana negli anni Sessanta, ma anche negli studi per l’ILSES e per l’Istituto Nazionale d’Urbanistica. RESEARCH ON THE NOTION OF URBAN ARTIFACT IN THE ARCHITECTURE OF THE CITY BY ALDO ROSSI. Doctoral candidate: Letizia Biondi Tutor: Valter Balducci The present doctoral dissertation deals with the notion of urban artifact that was formulated and presented by Aldo Rossi in his book The Architecture of the City, published in 1966. In The Architecture of the City, the notion of urban artifact is enunciated through a wide range of definitions and forms. In this thesis, a research was done on how the construction of this concept over time was preceded by various studies started in 1953 during the author’s youth, then re-organized and synthesized since 1963 in a manuscript titled “Manual of urban planning” and in two more manuscripts later on. The work of research re-constructed the formulation of the notion of urban artifact through Rossi’s writings. In this sense, the examination of Rossi’s participation in debates, seminars, reviews, university courses or academic researches was of fundamental importance to understand the complexity of a work which is not to be attributed to disciplinary concepts, but to the formulation of a communicable theory. The effort to understand and to explain the notion of urban artifact led to an examination of the meaning used by Rossi to compose The Architecture of the City, which he defines as similar to a treatise. Through this analysis, it emerged that the composition of the book is not directly ascribable to the classical use of editorial writing of a treatise, whose most famous references in the past are the promotion of a correct practice as in the case of Vitruvio’s treatise, or the use of a structure that introduces a new category as in the Alberti case. Contrary to the two founding books, the lack of a global and prescriptive system and the not immediate reference to the writing of a classical treatise are evident in The Architecture of the City. However, the possibility of researching on some unpublished documents allowed to discover that in the writings starting from 1953 the analysis of the questions that are at the core of the notion of urban artifact is rich of intuitions, that aim to autonomy and that would be synthesized, even though not in a systematic way, in his famous book. The attempt was that of highlighting the specification over time of the notion of urban artifact and its elaboration in the various writings preceding the publication of The Architecture of the City. It was also specified that, despite building on theoretical grounds, Rossi indicates a progressive version of the notion of urban artifact, that is a performing use in the city. The present research aims to understand the cultural roots of the notion of urban artifact in two main directions: analyzing, firstly, Rossi’s interests along his formation path and, secondly, the definition of material structure of an urban artifact identified by Rossi in the permanences and enriched by various contributions from other disciplines. The purpose of the present research is to revise the formation path made by Rossi in a critical way, starting by 1953, underlining its innovative aspects and identifying its describing limits, which will never lead to the formulation of an exact notion, but rather to the elaboration of a complex synthesis, enriched by references to other studies. In brief, the thesis is composed of three parts: 1. The first part, titled “The Theory of urban artifacts in The Architecture of the City”, analyzes the concept of urban artifact in the more general theoretical context of the book The Architecture of the City. Such analysis is done by “disassembling” the book, and by linking together the argumentations and the multiplicity of the sources which are explicitly quoted by Rossi. In this context, the book’s structure is defined more precisely through the revision of the references used by Rossi to compose his theoretical project. Moreover, the author’s life is traced back through the various editions, re-printings, introductions and illustrations. Finally, it is specified which role the concept of urban artifact has in the book, pointing out that it is placed in an equal relation with the book’s title; by so doing, the concept of urban artifact gets the new meaning of “fact to be observed”, similar to the use that was suggested by the French urban geography at the beginning of the 20th century. 2. The second part, titled “The formation of the notion of urban artifact 1953-66”, introduces the theoretical elaboration in Rossi’s writings before The Architecture of the City, that is from 1953 to 1966. This part tries to describe Rossi’s cultural roots, his collaborations and his interests, tracing back the progressive definition of his conception of city over time. The analysis focuses on the path followed by Rossi and on the documents that he wrote since the years as a student at the Department of Architecture at the Politecnico in Milan. This leads to a complex scenario of first essays, articles and notes that bear witness to the intellectual research aiming to the construction of a knowledge on the background of the Realism of the 1950s. Rossi develops, in fact, a cultural engagement that leads him after his studies to deal with more general issues about the city. In particular, his important collaboration with the architecture magazine “Casabella-continuità”, with the director Ernesto Nathan Rogers and with the whole redaction staff mark the following period when he starts getting interested in city planning literature, art, sociology, geography, economics and philosophy. Since 1963, Rossi has worked with the group directed by Carlo Aymonino at the “Istituto Universitario di Architettura” (University Institute of Architecture) in Venice, especially researching on building typologies and urban morphology. During these years, Rossi elaborates an analytical synthesis for the formulation of a theory about the city. From the present research, it is evident that the writings preceding The Architecture of the City develop the studies on urban artifacts, which will become theoretical core of different chapters of the book. In conclusion, the genesis of the book is described; written in two years, what was conceived to be an “urban planning manual” became a “treatise draft” for the formulation of an urban science, as Rossi defines it. 3. The third part is titled “The material structure of urban artifacts: the theory of permanence”. This research is made on the study of the city as a material fact, a manufacture, whose construction was made over time, bearing the traces of time. As far as the topic of permanence is concerned, it was also important to draw a comparison with the debate about the issues of environmental pre-existence of re-construction in historical areas, which was very lively during the years of the Reconstruction. Right from the beginning, of fundamental importance were the relationship with Ernesto Nathan Rogers, the discussions on the pages of Casabella-Continuità and the participation to some debates and researches. It is to note that various terms were taken by the philosophical thesis by some personalities such as Antonio Banfi and Enzo Paci, and then re-elaborated by the redaction staff at Casabella-Continuità, which Rossi took part in as well. Through this analysis, it emerged that there were some shifts in meaning and the formulation of a vocabulary of terms within the complex area of the architectonic culture in the 1950s and 1960s. Then, I examined the shapes in which Rossi introduces the definition of the theory of permanence and the references by some authors for the scientific construction of an architecture theory whose aim is being communicable and offering concrete research tools. Such analysis allowed making a hypothesis about the significance for Rossi of the French geographers of the first half of the 20th century: in particular, the work by Marcel Poëte and by Pierre Lavedan is the main source and the research area which Rossi mostly explored to define the theory of permanence and monuments. Therefore, in The Architecture of the City, permanencies are not presented as the “whole”, but they emerge from a method which isolates permanent urban artifacts, in this way allowing making a hypothesis on “what remains” after the continuous transformations made in the city. The sources examined were quoted by Rossi in The Architecture of the City; in particular I analyzed them in the same edition which Rossi referred to. Through such an analysis, it was possible to make a comparison of the texts with one another, which let emerge the use of terms taken by languages belonging to other disciplines in The Architecture of the City and which the use of wholly extrapolated concepts is. Methodological premises As far as the formulation of the notion of urban artifact is concerned, the analysis focuses on the originality of the expression, the connections that are assumed or contained in Rossi’s writings about the city, by collecting direct and indirect sources which formed a significant corpus of writings. The most relevant direct sources were found in the special collections of the Getty Research Institute in Los Angeles, where the “Aldo Rossi Papers” are conserved. This archive contains unpublished material from 1954 to 1988, such as manuscripts, typescripts, notebooks, cyclostyled documents, scraps and notes, and several letters. In the Aldo Rossi Papers there are also 32 out of the 47 Light Blue Notebooks (Quaderni Azzurri), the rough drafts of The Architecture of the City and of the “A Scientific Autobiography”. As regards The Architecture of the City in particular, the Aldo Rossi Papers preserve: a notebook by the title of “Urban planning manual, June, 1963”, which is an explicit first draft of the book; “Notes for urban planning book summer/winter 1963”; a notebook with a red cover dated September 20th, 1964 – August 8th, 1965; and a notebook with a blue cover dated August 30th, 1965 – December 15th, 1965. The possibility of accessing this archive allowed to increase the bibliography related to the youth studies, enabling a revision of the cultural path followed by Rossi’s education. To that end, it was fundamental to re-evaluate some issues linked to the socialist realism which led to a more precise picture of the first writings by Rossi against the background of the intellectual scenario where he formed. In addition to these texts, the collection of university researches, the articles published on specialized reviews and the speeches at debates and seminars were also examined. About The Architecture of the City, a wide-ranging critical literature was collected, related both to the text specifics and to its collocation in the story of architecture, questioning some observations which define The Architecture of the City as a conclusive and definite book. As far as the chapter on the permanence theory is concerned, the analysis started by the texts that Rossi indicated in The Architecture of the City, revealing the different contributions from the French literature on urban planning. This allowed to the present research a more specific definition of the connections to some central writings which, at the same time, were seen by Rossi as an opportunity to start up the elaboration of the idea of type. For this last part, it can be specified that Rossi formulates his idea of type in a cultural context where the interest in this topic was fundamental. Therefore, the sources which played a central role in this final phase emerge from an extensive panorama in which Rossi researched not only with the redaction staff at Casablanca-continuità and within the School of Venice in the 1960s, but also in his studies for the ILSES (Institute of the Region Lombardia for Economics and Social Studies) and for the National Institute of Urban Planning.

Design methodologies of microwawe integrated circuits for satellite telecommunications

The running innovation processes of the microwave transistor technologies, used in the implementation of microwave circuits, have to be supported by the study and development of proper design methodologies which, depending on the applications, will fully exploit the technology potentialities. After the choice of the technology to be used in the particular application, the circuit designer has few degrees of freedom when carrying out his design; in the most cases, due to the technological constrains, all the foundries develop and provide customized processes optimized for a specific performance such as power, low-noise, linearity, broadband etc. For these reasons circuit design is always a “compromise”, an investigation for the best solution to reach a trade off between the desired performances. This approach becomes crucial in the design of microwave systems to be used in satellite applications; the tight space constraints impose to reach the best performances under proper electrical and thermal de-rated conditions, respect to the maximum ratings provided by the used technology, in order to ensure adequate levels of reliability. In particular this work is about one of the most critical components in the front-end of a satellite antenna, the High Power Amplifier (HPA). The HPA is the main power dissipation source and so the element which mostly engrave on space, weight and cost of telecommunication apparatus; it is clear from the above reasons that design strategies addressing optimization of power density, efficiency and reliability are of major concern. Many transactions and publications demonstrate different methods for the design of power amplifiers, highlighting the availability to obtain very good levels of output power, efficiency and gain. Starting from existing knowledge, the target of the research activities summarized in this dissertation was to develop a design methodology capable optimize power amplifier performances complying all the constraints imposed by the space applications, tacking into account the thermal behaviour in the same manner of the power and the efficiency. After a reminder of the existing theories about the power amplifier design, in the first section of this work, the effectiveness of the methodology based on the accurate control of the dynamic Load Line and her shaping will be described, explaining all steps in the design of two different kinds of high power amplifiers. Considering the trade-off between the main performances and reliability issues as the target of the design activity, we will demonstrate that the expected results could be obtained working on the characteristics of the Load Line at the intrinsic terminals of the selected active device. The methodology proposed in this first part is based on the assumption that designer has the availability of an accurate electrical model of the device; the variety of publications about this argument demonstrates that it is so difficult to carry out a CAD model capable to taking into account all the non-ideal phenomena which occur when the amplifier operates at such high frequency and power levels. For that, especially for the emerging technology of Gallium Nitride (GaN), in the second section a new approach for power amplifier design will be described, basing on the experimental characterization of the intrinsic Load Line by means of a low frequency high power measurements bench. Thanks to the possibility to develop my Ph.D. in an academic spin-off, MEC – Microwave Electronics for Communications, the results of this activity has been applied to important research programs requested by space agencies, with the aim support the technological transfer from universities to industrial world and to promote a science-based entrepreneurship. For these reasons the proposed design methodology will be explained basing on many experimental results.

Adaptive wireless multimedia communication systems

In recent years, due to the rapid convergence of multimedia services, Internet and wireless communications, there has been a growing trend of heterogeneity (in terms of channel bandwidths, mobility levels of terminals, end-user quality-of-service (QoS) requirements) for emerging integrated wired/wireless networks. Moreover, in nowadays systems, a multitude of users coexists within the same network, each of them with his own QoS requirement and bandwidth availability. In this framework, embedded source coding allowing partial decoding at various resolution is an appealing technique for multimedia transmissions. This dissertation includes my PhD research, mainly devoted to the study of embedded multimedia bitstreams in heterogenous networks, developed at the University of Bologna, advised by Prof. O. Andrisano and Prof. A. Conti, and at the University of California, San Diego (UCSD), where I spent eighteen months as a visiting scholar, advised by Prof. L. B. Milstein and Prof. P. C. Cosman. In order to improve the multimedia transmission quality over wireless channels, joint source and channel coding optimization is investigated in a 2D time-frequency resource block for an OFDM system. We show that knowing the order of diversity in time and/or frequency domain can assist image (video) coding in selecting optimal channel code rates (source and channel code rates). Then, adaptive modulation techniques, aimed at maximizing the spectral efficiency, are investigated as another possible solution for improving multimedia transmissions. For both slow and fast adaptive modulations, the effects of imperfect channel estimation errors are evaluated, showing that the fast technique, optimal in ideal systems, might be outperformed by the slow adaptive modulation, when a real test case is considered. Finally, the effects of co-channel interference and approximated bit error probability (BEP) are evaluated in adaptive modulation techniques, providing new decision regions concepts, and showing how the widely used BEP approximations lead to a substantial loss in the overall performance.

Imaging of crustal scatterers using multiple seismic arrays

Array seismology is an useful tool to perform a detailed investigation of the Earth’s interior. Seismic arrays by using the coherence properties of the wavefield are able to extract directivity information and to increase the ratio of the coherent signal amplitude relative to the amplitude of incoherent noise. The Double Beam Method (DBM), developed by Krüger et al. (1993, 1996), is one of the possible applications to perform a refined seismic investigation of the crust and mantle by using seismic arrays. The DBM is based on a combination of source and receiver arrays leading to a further improvement of the signal-to-noise ratio by reducing the error in the location of coherent phases. Previous DBM works have been performed for mantle and core/mantle resolution (Krüger et al., 1993; Scherbaum et al., 1997; Krüger et al., 2001). An implementation of the DBM has been presented at 2D large-scale (Italian data-set for Mw=9.3, Sumatra earthquake) and at 3D crustal-scale as proposed by Rietbrock & Scherbaum (1999), by applying the revised version of Source Scanning Algorithm (SSA; Kao & Shan, 2004). In the 2D application, the rupture front propagation in time has been computed. In 3D application, the study area (20x20x33 km3), the data-set and the source-receiver configurations are related to the KTB-1994 seismic experiment (Jost et al., 1998). We used 60 short-period seismic stations (200-Hz sampling rate, 1-Hz sensors) arranged in 9 small arrays deployed in 2 concentric rings about 1 km (A-arrays) and 5 km (B-array) radius. The coherence values of the scattering points have been computed in the crustal volume, for a finite time-window along all array stations given the hypothesized origin time and source location. The resulting images can be seen as a (relative) joint log-likelihood of any point in the subsurface that have contributed to the full set of observed seismograms.

L'immobilità del traduttore: la traduzione dei classici moderni inglesi in Italia

Translations, says Gideon Toury, are facts of target cultures – but the perceived status of source texts has a bearing on how these are reflected or refracted in the target language. This proposition is particularly evident in the case of classics: when translators have to work on literary creations occupying a pivotal position in the source/target cultures, they adopt strategies of literalness and ennoblement which betray a quasi-religious awe – on the one hand, a desire to ruffle the surface of the revered original as little as possible; and on the other, a determination to reproduce the supposed “classical qualities” of the classic even when they are not present in the source. In this dissertation, Paola Venturi studies how the “idea of classic” influences translation theory and practice, and substantiates her theoretical observations by looking at Italian translations of eighteenth- and nineteenth-century English classics. A marked – and historically determined – disparity between source and target readerships, and the translators’ reverence for their prestigious originals, conspire to produce Italian versions which are much more “wooden” and “elegant” than their English counterparts.