L'utilizzo dei casi di studio per favorire l'apprendimento di metodologie e strumenti per lo sviluppo organizzativo o di percorsi di cura nelle aziende sanitarie

La formazione, in ambito sanitario, è considerata una grande leva di orientamento dei comportamenti, ma la metodologia tradizionale di formazione frontale non è la più efficace, in particolare nella formazione continua o “long-life education”. L’obiettivo primario della tesi è verificare se l’utilizzo della metodologia dello “studio di caso”, di norma utilizzata nella ricerca empirica, può favorire, nel personale sanitario, l’apprendimento di metodi e strumenti di tipo organizzativo-gestionale, partendo dalla descrizione di processi, decisioni, risultati conseguiti in contesti reali. Sono stati progettati e realizzati 4 studi di caso con metodologia descrittiva, tre nell’Azienda USL di Piacenza e uno nell’Azienda USL di Bologna, con oggetti di studio differenti: la continuità di cura in una coorte di pazienti con stroke e l’utilizzo di strumenti di monitoraggio delle condizioni di autonomia; l’adozione di un approccio “patient-centred” nella presa in carico domiciliare di una persona con BPCO e il suo caregiver; la percezione che caregiver e Medici di Medicina Generale o altri professionisti hanno della rete aziendale Demenze e Alzheimer; la ricaduta della formazione di Pediatri di Libera Scelta sull’attività clinica. I casi di studio sono stati corredati da note di indirizzo per i docenti e sono stati sottoposti a quattro referee per la valutazione dei contenuti e della metodologia. Il secondo caso è stato somministrato a 130 professionisti sanitari all’interno di percorso di valutazione delle competenze e dei potenziali realizzato nell’AUSL di Bologna. I referee hanno commentato i casi e gli strumenti di lettura organizzativa, sottolineando la fruibilità, approvando la metodologia utilizzata, la coniugazione tra ambiti clinico-assistenziali e organizzativi, e le teaching note. Alla fine di ogni caso è presente la valutazione di ogni referee.

Ultra-Low Power and Non-intrusive Wireless Monitoring for Smart Buildings

Wireless Sensor Networks (WSNs) offer a new solution for distributed monitoring, processing and communication. First of all, the stringent energy constraints to which sensing nodes are typically subjected. WSNs are often battery powered and placed where it is not possible to recharge or replace batteries. Energy can be harvested from the external environment but it is a limited resource that must be used efficiently. Energy efficiency is a key requirement for a credible WSNs design. From the power source's perspective, aggressive energy management techniques remain the most effective way to prolong the lifetime of a WSN. A new adaptive algorithm will be presented, which minimizes the consumption of wireless sensor nodes in sleep mode, when the power source has to be regulated using DC-DC converters. Another important aspect addressed is the time synchronisation in WSNs. WSNs are used for real-world applications where physical time plays an important role. An innovative low-overhead synchronisation approach will be presented, based on a Temperature Compensation Algorithm (TCA). The last aspect addressed is related to self-powered WSNs with Energy Harvesting (EH) solutions. Wireless sensor nodes with EH require some form of energy storage, which enables systems to continue operating during periods of insufficient environmental energy. However, the size of the energy storage strongly restricts the use of WSNs with EH in real-world applications. A new approach will be presented, which enables computation to be sustained during intermittent power supply. The discussed approaches will be used for real-world WSN applications. The first presented scenario is related to the experience gathered during an European Project (3ENCULT Project), regarding the design and implementation of an innovative network for monitoring heritage buildings. The second scenario is related to the experience with Telecom Italia, regarding the design of smart energy meters for monitoring the usage of household's appliances.

Intelligent Sensor Systems for Structural Health Monitoring Applications

The convergence between the recent developments in sensing technologies, data science, signal processing and advanced modelling has fostered a new paradigm to the Structural Health Monitoring (SHM) of engineered structures, which is the one based on intelligent sensors, i.e., embedded devices capable of stream processing data and/or performing structural inference in a self-contained and near-sensor manner. To efficiently exploit these intelligent sensor units for full-scale structural assessment, a joint effort is required to deal with instrumental aspects related to signal acquisition, conditioning and digitalization, and those pertaining to data management, data analytics and information sharing. In this framework, the main goal of this Thesis is to tackle the multi-faceted nature of the monitoring process, via a full-scale optimization of the hardware and software resources involved by the {SHM} system. The pursuit of this objective has required the investigation of both: i) transversal aspects common to multiple application domains at different abstraction levels (such as knowledge distillation, networking solutions, microsystem {HW} architectures), and ii) the specificities of the monitoring methodologies (vibrations, guided waves, acoustic emission monitoring). The key tools adopted in the proposed monitoring frameworks belong to the embedded signal processing field: namely, graph signal processing, compressed sensing, ARMA System Identification, digital data communication and TinyML.

Exploiting the environment for structural health monitoring: Strategies, algorithms, and technologies

A densely built environment is a complex system of infrastructure, nature, and people closely interconnected and interacting. Vehicles, public transport, weather action, and sports activities constitute a manifold set of excitation and degradation sources for civil structures. In this context, operators should consider different factors in a holistic approach for assessing the structural health state. Vibration-based structural health monitoring (SHM) has demonstrated great potential as a decision-supporting tool to schedule maintenance interventions. However, most excitation sources are considered an issue for practical SHM applications since traditional methods are typically based on strict assumptions on input stationarity. Last-generation low-cost sensors present limitations related to a modest sensitivity and high noise floor compared to traditional instrumentation. If these devices are used for SHM in urban scenarios, short vibration recordings collected during high-intensity events and vehicle passage may be the only available datasets with a sufficient signal-to-noise ratio. While researchers have spent efforts to mitigate the effects of short-term phenomena in vibration-based SHM, the ultimate goal of this thesis is to exploit them and obtain valuable information on the structural health state. First, this thesis proposes strategies and algorithms for smart sensors operating individually or in a distributed computing framework to identify damage-sensitive features based on instantaneous modal parameters and influence lines. Ordinary traffic and people activities become essential sources of excitation, while human-powered vehicles, instrumented with smartphones, take the role of roving sensors in crowdsourced monitoring strategies. The technical and computational apparatus is optimized using in-memory computing technologies. Moreover, identifying additional local features can be particularly useful to support the damage assessment of complex structures. Thereby, smart coatings are studied to enable the self-sensing properties of ordinary structural elements. In this context, a machine-learning-aided tomography method is proposed to interpret the data provided by a nanocomposite paint interrogated electrically.