Fault detection in rotating machines by vibration signal processing techniques

Machines with moving parts give rise to vibrations and consequently noise. The setting up and the status of each machine yield to a peculiar vibration signature. Therefore, a change in the vibration signature, due to a change in the machine state, can be used to detect incipient defects before they become critical. This is the goal of condition monitoring, in which the informations obtained from a machine signature are used in order to detect faults at an early stage. There are a large number of signal processing techniques that can be used in order to extract interesting information from a measured vibration signal. This study seeks to detect rotating machine defects using a range of techniques including synchronous time averaging, Hilbert transform-based demodulation, continuous wavelet transform, Wigner-Ville distribution and spectral correlation density function. The detection and the diagnostic capability of these techniques are discussed and compared on the basis of experimental results concerning gear tooth faults, i.e. fatigue crack at the tooth root and tooth spalls of different sizes, as well as assembly faults in diesel engine. Moreover, the sensitivity to fault severity is assessed by the application of these signal processing techniques to gear tooth faults of different sizes.

Phytoremediation by poplar: polyphenols polyamines and oxidative damage in the response to heavy metals in in vitro and in hydroponic cultures.

Poplar is considered a good candidate for phytoremediation, but its tolerance to heavy metals has not been fully investigated yet. In the present work, two different culture systems (in vitro and aeroponic/hydroponic) and two different stress tolerant clones of Populus alba (AL22 and Villafranca) were investigated for their total polyphenol and flavonoid content, individual phenolic compounds, polyamine, lipid peroxidation and hydrogen peroxide levels in response to Cu. In AL22 poplar plants cultured in vitro in the presence or absence of 50 μM Cu, total leaves polyphenol and flavonoid content was higher in treated samples than in controls but unaltered in the roots. Equally the same clone, grown under aeroponic conditions and hydroponically treated for 72 h with 100 μM Cu, displayed increased amount of polyphenols and flavonoids in the leaves, in particular chlorogenic acid and quercetin, and no differences in the roots. In exudates from treated roots total polyphenols and flavonoids, in particular catechin and epicatechin, were more abundant than in controls. Polyamine levels show an increase in conjugated putrescine (Put) and spermidine (Spd) was found. In the Villafranca clone, treated with 100 μM Cu for 6, 24 and 72 h, the pattern of polyphenol and flavonoid accumulation was the same as in AL22; in Cu-treated roots these compounds decreased compared with controls while they increased in root exudates. Free polyamine levels rose at 24 and 72 h while only conjugated Put increased at 24 h. Cu-treated Villafranca plants exhibited a higher malondialdehyde production than controls indicative of membrane lipid peroxidation and, therefore, oxidative stress. An in vitro experiment was carried to investigate the antioxidant effect of the polyamine spermidine (Spd). Exogenous Spd, supplied together with 100 μM Cu, reduced the accumulation of polyphenols and flavonoids, MDA and hydrogen peroxide induced by Cu.

L'evoluzione della tutela cautelare nel processo amministrativo

L’effettività della tutela cautelare, intesa come tutela tempestiva, adeguata e piena, è stata la linea cardine dell’evoluzione della giustizia amministrativa, che, nel corso di un periodo durato più di un secolo, grazie all’opera della giurisprudenza e della dottrina, si è strutturata oggi su un vero processo. Approdo recente, e allo stesso tempo, simbolo di questa evoluzione, è sicuramente il Codice del processo amministrativo emanato con il d. lgs. 2 luglio 2010, n. 104. La ricerca, di cui questo contributo costituisce un resoconto, è iniziata contestualmente all’entrata in vigore del nuovo testo, e quindi è stata anche l’occasione per vederne le prime applicazioni giurisprudenziali. In particolare la lettura del Codice, prescindendo da una mera ricognizione di tutto il suo lungo articolato, è stata fatta alla luce di una ponderazione, nell’attualità, non solo del principio di effettività, ma anche del principio di strumentalità che lega tradizionalmente la fase cautelare con la fase di merito. I risultati della ricerca manifestano la volontà del legislatore di confermare questo rapporto strumentale, per fronteggiare una deriva incontrollata verso una cautela dagli effetti alle volte irreversibili, quale verificatasi nell’applicazione giurisprudenziale, ma contestualmente evidenziano la volontà di estendere la portata della tutela cautelare. Guardando a cosa sia diventata oggi la tutela cautelare, si è assistito ad un rafforzamento degli effetti conformativi, tipici delle sentenze di merito ma che si sono estesi alla fase cautelare. I giudici, pur consapevoli che la tutela cautelare non sia una risposta a cognizione piena, bensì sommaria, intendono comunque garantire una tutela tempestiva ed effettiva, anche per il tramite di tecniche processuali particolari, come quella del remand, cui, all’interno della ricerca, viene dedicato ampio spazio. Nella sua ultima parte la ricerca si è focalizzata, sempre volendo guardare in maniera globale agli effetti della tutela cautelare, sul momento dell’esecuzione e quindi sul giudizio di ottemperanza.

Study and implementation of control strategies for polymerization processes assisted by atmospheric pressure plasma jets

In recent years, polymerization processes assisted by atmospheric pressure plasma jets (APPJs) have received increasing attention in numerous industrially relevant sectors since they allow to coat complex 3D substrates without requiring expensive vacuum systems. Therefore, advancing the comprehension of these processes has become a high priority topic of research. This PhD dissertation is focused on the study and the implementation of control strategies for a polymerization process assisted by an atmospheric pressure single electrode plasma jet. In the first section, a study of the validity of the Yasuda parameter (W/FM) as controlling parameter in the polymerization process assisted by the plasma jet and an aerosolized fluorinated silane precursor is proposed. The surface characterization of coatings deposited under different W/FM values reveals the presence of two very well-known deposition domains, thus suggesting the validity of W/FM as controlling parameter. In addition, the key role of the Yasuda parameter in the process is further demonstrated since coatings deposited under the same W/FM exhibit similar properties, regardless of how W/FM is obtained. In the second section, the development of a methodology for measuring the energy of reactions in the polymerization process assisted by the plasma jet and vaporized hexamethyldisiloxane is presented. The values of energy per precursor molecule are calculated through the identification and resolution of a proper equivalent electrical circuit. To validate the methodology, these energy values are correlated to the bond energies in the precursor molecule and to the properties of deposited thin films. It is shown that the precursor fragmentation in the discharge and the coating characteristics can be successfully explained according to the obtained values of energy per molecule. Through a detailed discussion of the limits and the potentialities of both the control strategies, this dissertation provides useful insights into the control of polymerization processes assisted by APPJs.

Sviluppo di metodologie di localizzazione nel contesto del Comprehensive Nuclear Test-Ban Treaty

Since the first underground nuclear explosion, carried out in 1958, the analysis of seismic signals generated by these sources has allowed seismologists to refine the travel times of seismic waves through the Earth and to verify the accuracy of the location algorithms (the ground truth for these sources was often known). Long international negotiates have been devoted to limit the proliferation and testing of nuclear weapons. In particular the Treaty for the comprehensive nuclear test ban (CTBT), was opened to signatures in 1996, though, even if it has been signed by 178 States, has not yet entered into force, The Treaty underlines the fundamental role of the seismological observations to verify its compliance, by detecting and locating seismic events, and identifying the nature of their sources. A precise definition of the hypocentral parameters represents the first step to discriminate whether a given seismic event is natural or not. In case that a specific event is retained suspicious by the majority of the State Parties, the Treaty contains provisions for conducting an on-site inspection (OSI) in the area surrounding the epicenter of the event, located through the International Monitoring System (IMS) of the CTBT Organization. An OSI is supposed to include the use of passive seismic techniques in the area of the suspected clandestine underground nuclear test. In fact, high quality seismological systems are thought to be capable to detect and locate very weak aftershocks triggered by underground nuclear explosions in the first days or weeks following the test. This PhD thesis deals with the development of two different seismic location techniques: the first one, known as the double difference joint hypocenter determination (DDJHD) technique, is aimed at locating closely spaced events at a global scale. The locations obtained by this method are characterized by a high relative accuracy, although the absolute location of the whole cluster remains uncertain. We eliminate this problem introducing a priori information: the known location of a selected event. The second technique concerns the reliable estimates of back azimuth and apparent velocity of seismic waves from local events of very low magnitude recorded by a trypartite array at a very local scale. For the two above-mentioned techniques, we have used the crosscorrelation technique among digital waveforms in order to minimize the errors linked with incorrect phase picking. The cross-correlation method relies on the similarity between waveforms of a pair of events at the same station, at the global scale, and on the similarity between waveforms of the same event at two different sensors of the try-partite array, at the local scale. After preliminary tests on the reliability of our location techniques based on simulations, we have applied both methodologies to real seismic events. The DDJHD technique has been applied to a seismic sequence occurred in the Turkey-Iran border region, using the data recorded by the IMS. At the beginning, the algorithm was applied to the differences among the original arrival times of the P phases, so the cross-correlation was not used. We have obtained that the relevant geometrical spreading, noticeable in the standard locations (namely the locations produced by the analysts of the International Data Center (IDC) of the CTBT Organization, assumed as our reference), has been considerably reduced by the application of our technique. This is what we expected, since the methodology has been applied to a sequence of events for which we can suppose a real closeness among the hypocenters, belonging to the same seismic structure. Our results point out the main advantage of this methodology: the systematic errors affecting the arrival times have been removed or at least reduced. The introduction of the cross-correlation has not brought evident improvements to our results: the two sets of locations (without and with the application of the cross-correlation technique) are very similar to each other. This can be commented saying that the use of the crosscorrelation has not substantially improved the precision of the manual pickings. Probably the pickings reported by the IDC are good enough to make the random picking error less important than the systematic error on travel times. As a further justification for the scarce quality of the results given by the cross-correlation, it should be remarked that the events included in our data set don’t have generally a good signal to noise ratio (SNR): the selected sequence is composed of weak events ( magnitude 4 or smaller) and the signals are strongly attenuated because of the large distance between the stations and the hypocentral area. In the local scale, in addition to the cross-correlation, we have performed a signal interpolation in order to improve the time resolution. The algorithm so developed has been applied to the data collected during an experiment carried out in Israel between 1998 and 1999. The results pointed out the following relevant conclusions: a) it is necessary to correlate waveform segments corresponding to the same seismic phases; b) it is not essential to select the exact first arrivals; and c) relevant information can be also obtained from the maximum amplitude wavelet of the waveforms (particularly in bad SNR conditions). Another remarkable point of our procedure is that its application doesn’t demand a long time to process the data, and therefore the user can immediately check the results. During a field survey, such feature will make possible a quasi real-time check allowing the immediate optimization of the array geometry, if so suggested by the results at an early stage.

Development of quantitative methods for sustainability assessment in process industry

The increasing aversion to technological risks of the society requires the development of inherently safer and environmentally friendlier processes, besides assuring the economic competitiveness of the industrial activities. The different forms of impact (e.g. environmental, economic and societal) are frequently characterized by conflicting reduction strategies and must be holistically taken into account in order to identify the optimal solutions in process design. Though the literature reports an extensive discussion of strategies and specific principles, quantitative assessment tools are required to identify the marginal improvements in alternative design options, to allow the trade-off among contradictory aspects and to prevent the “risk shift”. In the present work a set of integrated quantitative tools for design assessment (i.e. design support system) was developed. The tools were specifically dedicated to the implementation of sustainability and inherent safety in process and plant design activities, with respect to chemical and industrial processes in which substances dangerous for humans and environment are used or stored. The tools were mainly devoted to the application in the stages of “conceptual” and “basic design”, when the project is still open to changes (due to the large number of degrees of freedom) which may comprise of strategies to improve sustainability and inherent safety. The set of developed tools includes different phases of the design activities, all through the lifecycle of a project (inventories, process flow diagrams, preliminary plant lay-out plans). The development of such tools gives a substantial contribution to fill the present gap in the availability of sound supports for implementing safety and sustainability in early phases of process design. The proposed decision support system was based on the development of a set of leading key performance indicators (KPIs), which ensure the assessment of economic, societal and environmental impacts of a process (i.e. sustainability profile). The KPIs were based on impact models (also complex), but are easy and swift in the practical application. Their full evaluation is possible also starting from the limited data available during early process design. Innovative reference criteria were developed to compare and aggregate the KPIs on the basis of the actual sitespecific impact burden and the sustainability policy. Particular attention was devoted to the development of reliable criteria and tools for the assessment of inherent safety in different stages of the project lifecycle. The assessment follows an innovative approach in the analysis of inherent safety, based on both the calculation of the expected consequences of potential accidents and the evaluation of the hazards related to equipment. The methodology overrides several problems present in the previous methods proposed for quantitative inherent safety assessment (use of arbitrary indexes, subjective judgement, build-in assumptions, etc.). A specific procedure was defined for the assessment of the hazards related to the formations of undesired substances in chemical systems undergoing “out of control” conditions. In the assessment of layout plans, “ad hoc” tools were developed to account for the hazard of domino escalations and the safety economics. The effectiveness and value of the tools were demonstrated by the application to a large number of case studies concerning different kinds of design activities (choice of materials, design of the process, of the plant, of the layout) and different types of processes/plants (chemical industry, storage facilities, waste disposal). An experimental survey (analysis of the thermal stability of isomers of nitrobenzaldehyde) provided the input data necessary to demonstrate the method for inherent safety assessment of materials.

Profilo molecolare dei linfomi post-trapianto

Fifty-two cases of monomorphic post-transplant lymphoproliferative disorders (M-PTLD), developed in patients undergone solid organ or bone marrow transplantation, were studied by the application of the tissue micro-array (TMA) technology. They included 50 cases of diffuse large B-cell lymphomas (DLBCL) and 2 Burkitt lymphomas (BL). In order to evaluate the immune-profile a large panel of antibodies was applied including several new markers (Cyclin D2, Cyclin D3, p27, PKC-β, FOXP-1 and Survivin) identified as negative prognostic factors in DLBCL of the immunocompetent patient. Out of 50 DLBCL, 23 cases (46%) had an Activated B Cell (ABC) phenotype, 8 (16%) a Germinal Centre B-cell (GCB) phenotype, and 11 (22%) an Unclassified (UC) phenotype. In 8 cases (16%) the subtype was not demonstrable due to sub-optimal preservation or loss of the tissue core. FISH analysis detected BCL2 gene amplification and MYC rearrangement. EBV was identified in 32 cases (64%) performing immunohistochemistry (LMP-1) and in situ hybridization (EBER). Clinical data and follow-up were available in all cases of malignant lymphomas but one. Thirty-two patients died for progression of disease or complications related to transplant (bleeding, bacterial infections, and multi-organ failure); 17 patients are actually alive and disease-free. M-PTLD are aggressive lymphomas characterized by very poor outcome. The neoplastic process is stimulated by a prolonged immunosuppressive status which is capable to induce alterations of the immune system and allow EBV reactivation in previously infected patients. Indeed EBV infection seems to be the most significant risk factor to predict the development of a PTLD while age, sex, site of involvement and type of transplant do not have significant correlation. Furthermore DLBCL arisen in a setting of immunodeficiency share phenotypic and molecular features with DLBCL of the immunocompetent patient. In particular, the former shows a high incidence of BCL2 gene amplification and this aberration typically correlates with “non-GCB” phenotype. Also M-PTLD do express prognostic markers (PKC-β, cyclin D2, FOXP-1, and Survivin): notably, in our study, PKC-β and FOXP-1 were frequently expressed and they were predictive of a shorter overall survival even in lymphomas recognized to have a good prognosis (GCB-type). Given the fact that such molecules are detectable at the time of the diagnosis, we postulate whether a “tailored” or more specific therapy might be applied in the management of the immune-compromised patient.

Design and Computation of Warped Time-Frequency Transforms

In this work we introduce an analytical approach for the frequency warping transform. Criteria for the design of operators based on arbitrary warping maps are provided and an algorithm carrying out a fast computation is defined. Such operators can be used to shape the tiling of time-frequency plane in a flexible way. Moreover, they are designed to be inverted by the application of their adjoint operator. According to the proposed mathematical model, the frequency warping transform is computed by considering two additive operators: the first one represents its nonuniform Fourier transform approximation and the second one suppresses aliasing. The first operator is known to be analytically characterized and fast computable by various interpolation approaches. A factorization of the second operator is found for arbitrary shaped non-smooth warping maps. By properly truncating the operators involved in the factorization, the computation turns out to be fast without compromising accuracy.

Ovidio e Marziale tra poesia e retorica

This 
study
 participates 
of
 the 
vivacious
 and
 recent 
interest
 for
 the 
Martial’s
 work, 
that
 has
 brought
 to
 discover
 a
 wealth
 and 
a 
complexity,
 remained 
for 
a
long
 time
 hidden, 
of 
the 
epigrammatic
 kind.
 Of
 this
 complexity
 is
 an
 important
 part
 the
 refined
 allusive
 game
 with
 the
 preceding
 tradition,
 as
 that
 with 
Ovid.
 My 
work
 is
 divided
 in
 two
 sections: 
the 
first
 one
 is dedicated
 to 
the 
passages 
in 
which
 Martial
 quotes
 Ovid
 and
 to
 the
 surest
 and
 more
 important
 recalls.
 The
 single
 chapters
 are
 dedicated
 to
 a
 detail
 theme
 (the
 apostrophe
 to
 the
 book;
 the
 mythology;
 the
 love;
 the
 exile).
 The
 second
 section, 
instead, 
is
 dedicated 
to 
the 
rhetoric,
 with
 an 
analysis 
of
 the
 structure 
of 
the 
poetic
 discourse
 in
 the
 elegy
 and
 in
 the
 epigram,
 and
 to
 the study
 of
 some
 rhetorical
 figures,
 in
 primis
 the
 sententia,
 key‐element
 in
 the
 Martial’s
 work,
 but
 also
 decisive
 in
 the
 innovative
 poetic process
 begun by
 Ovid.


Rapporto tra struttura e funzione della cistatina B e dei suoi mutanti in relazione all'epilessia mioclonica progressiva di tipo 1 (EPM1)

This work shows for the first time that native CSTB polymerizes on addition of Cu2+ and DnaK (Hsp70). Cysteines are involved in the polymerization process and in particular at least one cysteine is necessary. We propose that Cu2+ interacts with the thiol group of cysteine and oxidize it. The oxidized cysteine modifies the CSTB structure allowing interaction with DnaK/Hsp70 to occur. Thus, Cu2+ binding to CSTB exposes a site for DnaK and such interaction allows the polymerization of CSTB. The polymers generated from native CSTB monomers, are DTT sensitive and they may represent physiological polymers. Denatured CSTB does not require Cu2+ and polymerizes simply on addition of DnaK. The polymers generated from denatured CSTB do not respond to DTT. They have characteristics similar to those of the CSTB toxic aggregates described in vivo in eukaryotic cells following CSTB over-expression. Interaction between CSTB and Hsp70 is shown by IP experiments. The interaction occurs with WT CSTB and not with the cys mutant. This suggests that disulphur bonds are involved. Methal-cathalyzed oxidation of proteins involves reduction of the metal ion(s) bound to the protein itself and oxidation of neighboring ammino acid residues resulting in structural modification and de-stabilization of the molecule. In this work we propose that the cysteine thyol residue of CSTB in the presence of Cu2+ is oxidized, and cathalyzes the formation of disulphide bonds with Hsp70, that, once bound to CSTB, mediates its polymerization. In vivo this molecular mechanism of CSTB polymerization could be regulated by redox environment through the cysteine residue. This may imply that CSTB physiological polymers have a specific cellular function, different from that of the protease inhibitor known for the CSTB monomer. This hypothesis is interesting in relation to Progressive Myoclonus Epilepsy of type 1 (EPM1). This pathology is usually caused by mutations in the CSTB gene. CSTB is a ubiquitous protein, but EPM1 patients have problems only in the central nervous system. Maybe physiological CSTB polymers have a specific function altered in people affected by EPM1.

Dynamic identification of structures: experimental assessment of modal parameteres through methods in frequency domain, in time-frequency domain and model updating

Among the experimental methods commonly used to define the behaviour of a full scale system, dynamic tests are the most complete and efficient procedures. A dynamic test is an experimental process, which would define a set of characteristic parameters of the dynamic behaviour of the system, such as natural frequencies of the structure, mode shapes and the corresponding modal damping values associated. An assessment of these modal characteristics can be used both to verify the theoretical assumptions of the project, to monitor the performance of the structural system during its operational use. The thesis is structured in the following chapters: The first introductive chapter recalls some basic notions of dynamics of structure, focusing the discussion on the problem of systems with multiply degrees of freedom (MDOF), which can represent a generic real system under study, when it is excited with harmonic force or in free vibration. The second chapter is entirely centred on to the problem of dynamic identification process of a structure, if it is subjected to an experimental test in forced vibrations. It first describes the construction of FRF through classical FFT of the recorded signal. A different method, also in the frequency domain, is subsequently introduced; it allows accurately to compute the FRF using the geometric characteristics of the ellipse that represents the direct input-output comparison. The two methods are compared and then the attention is focused on some advantages of the proposed methodology. The third chapter focuses on the study of real structures when they are subjected to experimental test, where the force is not known, like in an ambient or impact test. In this analysis we decided to use the CWT, which allows a simultaneous investigation in the time and frequency domain of a generic signal x(t). The CWT is first introduced to process free oscillations, with excellent results both in terms of frequencies, dampings and vibration modes. The application in the case of ambient vibrations defines accurate modal parameters of the system, although on the damping some important observations should be made. The fourth chapter is still on the problem of post processing data acquired after a vibration test, but this time through the application of discrete wavelet transform (DWT). In the first part the results obtained by the DWT are compared with those obtained by the application of CWT. Particular attention is given to the use of DWT as a tool for filtering the recorded signal, in fact in case of ambient vibrations the signals are often affected by the presence of a significant level of noise. The fifth chapter focuses on another important aspect of the identification process: the model updating. In this chapter, starting from the modal parameters obtained from some environmental vibration tests, performed by the University of Porto in 2008 and the University of Sheffild on the Humber Bridge in England, a FE model of the bridge is defined, in order to define what type of model is able to capture more accurately the real dynamic behaviour of the bridge. The sixth chapter outlines the necessary conclusions of the presented research. They concern the application of a method in the frequency domain in order to evaluate the modal parameters of a structure and its advantages, the advantages in applying a procedure based on the use of wavelet transforms in the process of identification in tests with unknown input and finally the problem of 3D modeling of systems with many degrees of freedom and with different types of uncertainty.

Mastocitosi cutanee: il mastocitoma in età pediatrica

Background: Mastocytosis is a rare disease involving mast cells (MC) and their CD34+ progenitors. According to the WHO consensus classification, cutaneous mastocytosis (CM) is considered a benign disease confined to the skin, preferentially seen in young children with a marked tendency to regress spontaneously. Aim of our study was the long-term assessment of the outcome of solitary (SM) and multiple (MM) mastocytomas in a pediatric population. Materials and methods: From January 1996 to December 2010, 241 pediatric patients with a diagnosis of CM were followed-up at the outpatient division of pediatric dermatology of the University of Bologna. We focused our retrospective evaluation on patients affected by SM or MM. We collected, through the analysis of medical records and with a telephone questionnaire for patients and their families, information on clinical aspects of the disease evolution and on the efficacy of topical steroid therapy. Results: Over the 241 considered patients we recorded: SM or MM in 176 (73%) pts., urticaria pigmentosa in 53 (22%) pts., telangiectasia macularis eruptiva perstans in 9 (4%) pts., diffuse CM in 2 (0,9%) pts. and polymorph CM in 1 (0,4%) pt. On 176 children affected by SM or MM (97 M vs. 79 F), 130 (74%) patients were followed-up with a mean of 56,3 (r. 4-142) months. A satisfactory outcome was recorded in 99 (76%) cases of whom 52 (53%) treated with topic steroids. Mean time to complete regression was 16.4 m. on treated patients vs. 34.7 m. on non treated patients (p=0,001). Conclusions: From our study emerged that resolution of the disease is independent from therapy, but the time to regression and to complete recovery of the coetaneous lesions is faster and favored by the application of topic steroid with an improvement of the quality of life for children and their families.

The Domon Family of Plant Plasma Membrane B-Type Cytochromes: Heterologous Expression, Biochemical Characterization and Physiological Roles in Vivo

The DOMON domain is a domain widespread in nature, predicted to fold in a β-sandwich structure. In plants, AIR12 is constituted by a single DOMON domain located in the apoplastic space and is GPI-modified for anchoring to the plasma membrane. Arabidopsis thaliana AIR12 has been heterologously expressed as a recombinant protein (recAtAIR12) in Pichia pastoris. Spectrophotometrical analysis of the purified protein showed that recAtAir12 is a cytochrome b. RecAtAIR12 is highly glycosylated, it is reduced by ascorbate, superoxide and naftoquinones, oxidised by monodehydroascorbate and oxygen and insensitive to hydrogen peroxide. The addition of recAtAIR12 to permeabilized plasma membranes containing NADH, FeEDTA and menadione, caused a statistically significant increase in hydroxyl radicals as detected by electron paramagnetic resonance. In these conditions, recAtAIR12 has thus a pro-oxidant role. Interestingly, AIR12 is related to the cytochrome domain of cellobiose dehydrogenase which is involved in lignin degradation, possibly via reactive oxygen species (ROS) production. In Arabidopsis the Air12 promoter is specifically activated at sites where cell separations occur and ROS, including •OH, are involved in cell wall modifications. air12 knock-out plants infected with Botrytis cinerea are more resistant than wild-type and air12 complemented plants. Also during B. cinerea infection, cell wall modifications and ROS are involved. Our results thus suggest that AIR12 could be involved in cell wall modifying reactions by interacting with ROS and ascorbate. CyDOMs are plasma membrane redox proteins of plants that are predicted to contain an apoplastic DOMON fused with a transmembrane cytochrome b561 domain. CyDOMs have never been purified nor characterised. The trans-membrane portion of a soybean CyDOM was expressed in E. coli but purification could not be achieved. The DOMON domain was expressed in P. pastoris and shown to be itself a cytochrome b that could be reduced by ascorbate.

Ruolo del test da sforzo cardiopolmonare nei pazienti affetti da cardiomiopatia ipertrofica in età pediatrica

Background Decreased exercise capacity, and reduction in peak oxygen uptake are present in most patients affected by hypertrophic cardiomyopathy (HCM) . In addition an abnormal blood pressure response during a maximal exercise test was seen to be associated with high risk for sudden cardiac death in adult patients affected by HCM. Therefore exercise test (CPET) has become an important part of the evaluation of the HCM patients, but data on its role in patients with HCM in the pediatric age are quite limited. Methods and results Between 2004 and 2010, using CPET and echocardiography, we studied 68 children (mean age 13.9 ± 2 years) with HCM. The exercise test was completed by all the patients without adverse complications. The mean value of achieved VO2 max was 31.4 ± 8.3 mL/Kg/min which corresponded to 77.5 ± 16.9 % of predicted range. 51 patients (75%) reached a subnormal value of VO2max. On univariate analysis the achieved VO2 as percentage of predicted and the peak exercise systolic blood pressure (BP) Z score were inversely associated with max left ventricle (LV) wall thickness, with E/Ea ratio, and directly related with Ea and Sa wave velocities No association was found with the LV outflow tract gradient. During a mean follow up of 2.16 ± 1.7 years 9 patients reached the defined clinical end point of death, transplantation, implanted cardioverter defibrillator (ICD) shock, ICD implantation for secondary prevention or myectomy. Patients with peak VO2 < 52% or with peak systolic BP Z score < -5.8 had lower event free survival at follow up. Conclusions Exercise capacity is decreased in patients with HCM in pediatric age and global ventricular function seems being the most important determinant of exercise capacity in these patients. CPET seems to play an important role in prognostic stratification of children affected by HCM.

Analisi climatica ad alta risoluzione delle precipitazioni sul nord Italia (1961-2005)

L’obiettivo di questo lavoro di tesi è di ottenere un’analisi climatica giornaliera ad alta risoluzione della precipitazione sul territorio del nord Italia realizzata con tecniche di controllo statistico, di analisi e di strumenti di descrizione dei risultati presentati nella recente letteratura. A tal fine, sono stati utilizzati i dati dell’Archivio ARCIS. In seguito alle fasi di controllo qualità, omogeneità e sincronicità i dati sono stati utilizzati per realizzare un’analisi giornaliera su grigliato regolare a 10 km di risoluzione utile alla rappresentazione della variabilità spazio-temporale della precipitazione sul Nord Italia per il periodo 1961-2005. I risultati di tale analisi mettono in evidenza dei valori medi di precipitazione annuale abbastanza intensi sulla parte centrale dell’arco Alpino, con massimi (oltre 2000 mm) sull’estremità orientale e sull’Appennino Ligure. Valori minimi (500 – 600 mm) sono osservati lungo le aree prospicienti il fiume Po, in Val d’Aosta ed in Alto Adige. La corrispondente analisi del trend temporale indica la presenza di lievi cali statisticamente significativi solo in aree limitate del territorio. In coerenza con questi risultati, la variazione nel tempo della precipitazione annuale mediata su tutto il territorio mette in evidenza un’intensa variabilità decennale, ma solo una lieve flessione lineare sull’intero periodo. Il numero annuo di giorni piovosi ed il 90° percentile della precipitazione giornaliera presentano invece trend lineari un po’ più pronunciati. In particolare, sul periodo considerato si nota un calo del numero di giorni piovosi su gran parte del territorio e solo su alcune aree del territorio un aumento dell’intensità del 90° percentile, sia a scala annuale che stagionale. Nell’ultima parte di questo lavoro è stato realizzato uno studio della relazione fra la forzante climatica e l’evoluzione della morfologia dell’Appennino Emiliano-Romagnolo. I risultati mostrano che a parità di quota, di pendenza e di litologia, la franosità è influenzata dalle precipitazioni.