Development Aid to Water Management in Mali: The Actors, ‘Global’ Paradigms, and ‘Local’ Translations

Development aid involves a complex network of numerous and extremely heterogeneous actors. Nevertheless, all actors seem to speak the same ‘development jargon’ and to display a congruence that extends from the donor over the professional consultant to the village chief. And although the ideas about what counts as ‘good’ and ‘bad’ aid have constantly changed over time —with new paradigms and policies sprouting every few years— the apparent congruence between actors more or less remains unchanged. How can this be explained? Is it a strategy of all actors to get into the pocket of the donor, or are the social dynamics in development aid more complex? When a new development paradigm appears, where does it come from and how does it gain support? Is this support really homogeneous? To answer the questions, a multi-sited ethnography was conducted in the sector of water-related development aid, with a focus on 3 paradigms that are currently hegemonic in this sector: Integrated Water Resources Management, Capacity Building, and Adaptation to Climate Change. The sites of inquiry were: the headquarters of a multilateral organization, the headquarters of a development NGO, and the Inner Niger Delta in Mali. The research shows that paradigm shifts do not happen overnight but that new paradigms have long lines of descent. Moreover, they require a lot of work from actors in order to become hegemonic; the actors need to create a tight network of support. Each actor, however, interprets the paradigms in a slightly different way, depending on the position in the network. They implant their own interests in their interpretation of the paradigm (the actors ‘translate’ their interests), regardless of whether they constitute the donor, a mediator, or the aid recipient. These translations are necessary to cement and reproduce the network.

The Right to Voice: Its Realization by Estonian and American Parents in Public Schools

Investigating parents’ formal engagement opportunities in public schools serves well to characterize the relationship between states and societies. While the relationship between parental involvement and students’ academic success has been thoroughly investigated, rarely has it been seen to indicate countries’ governing regimes. The researcher was curious to see whether and how does parents’ voice differ in different democracies. The hypothesis was that in mature regimes, institutional opportunities for formal parental engagement are plenty and parents are actively involved; while in young democracies there are less opportunities and the engagement is lower. The assumption was also that parental deliberation in expressing their dissatisfaction with schools differs across democracies: where it is more intense, there it translates to higher engagement. Parents’ informedness on relevant regulations and agendas was assumed to be equally average, and their demographic background to have similar effects on engagement. The comparative, most different systems design was employed where public middle schools last graders’ parents in Tartu, Estonia and in Huntsville, Alabama the United States served as a sample. The multidimensional study includes the theoretical review, country and community analyses, institutional analysis in terms of formal parental involvement, and parents’ survey. The findings revealed sizeable differences between parents’ engagement levels in Huntsville and Tartu. The results indicate passivity in both communities, while in Tartu the engagement seems to be alarmingly low. Furthermore, Tartu parents have much less institutional opportunities to engage. In the United States, multilevel efforts to engage parents are visible from local to federal level, in Estonia similar intentions seem to be missing and meaningful parental organizations do not exist. In terms of civic education there is much room for development in both countries. The road will be longer for a young democracy Estonia in transforming its institutional systems from formally democratic to inherently inclusive.

Sulla progettazione in zona sismica di strutture dotate di dissipatori fluido-viscosi: proposta di una metodologia

CHAPTER 1:FLUID-VISCOUS DAMPERS In this chapter the fluid-viscous dampers are introduced. The first section is focused on the technical characteristics of these devices, their mechanical behavior and the latest evolution of the technology whose they are equipped. In the second section we report the definitions and the guide lines about the design of these devices included in some international codes. In the third section the results of some experimental tests carried out by some authors on the response of these devices to external forces are discussed. On this purpose we report some technical schedules that are usually enclosed to the devices now available on the international market. In the third section we show also some analytic models proposed by various authors, which are able to describe efficiently the physical behavior of the fluid-viscous dampers. In the last section we propose some cases of application of these devices on existing structures and on new-construction structures. We show also some cases in which these devices have been revealed good for aims that lies outside the reduction of seismic actions on the structures. CHAPTER 2:DESIGN METHODS PROPOSED IN LITERATURE In this chapter the more widespread design methods proposed in literature for structures equipped by fluid-viscous dampers are introduced. In the first part the response of sdf systems in the case of harmonic external force is studied, in the last part the response in the case of random external force is discussed. In the first section the equations of motion in the case of an elastic-linear sdf system equipped with a non-linear fluid-viscous damper undergoing a harmonic force are introduced. This differential problem is analytically quite complex and it’s not possible to be solved in a closed form. Therefore some authors have proposed approximate solution methods. The more widespread methods are based on equivalence principles between a non-linear device and an equivalent linear one. Operating in this way it is possible to define an equivalent damping ratio and the problem becomes linear; the solution of the equivalent problem is well-known. In the following section two techniques of linearization, proposed by some authors in literature, are described: the first technique is based on the equivalence of the energy dissipated by the two devices and the second one is based on the equivalence of power consumption. After that we compare these two techniques by studying the response of a sdf system undergoing a harmonic force. By introducing the equivalent damping ratio we can write the equation of motion of the non-linear differential problem in an implicit form, by dividing, as usual, for the mass of the system. In this way, we get a reduction of the number of variables, by introducing the natural frequency of the system. The equation of motion written in this form has two important properties: the response is linear dependent on the amplitude of the external force and the response is dependent on the ratio of the frequency of the external harmonic force and the natural frequency of the system only, and not on their single values. All these considerations, in the last section, are extended to the case of a random external force. CHAPTER 3: DESIGN METHOD PROPOSED In this chapter the theoretical basis of the design method proposed are introduced. The need to propose a new design method for structures equipped with fluid-viscous dampers arises from the observation that the methods reported in literature are always iterative, because the response affects some parameters included in the equation of motion (such as the equivalent damping ratio). In the first section the dimensionless parameterε is introduced. This parameter has been obtained from the definition of equivalent damping ratio. The implicit form of the equation of motion is written by introducing the parameter ε, instead of the equivalent damping ratio. This new implicit equation of motions has not any terms affected by the response, so that once ε is known the response can be evaluated directly. In the second section it is discussed how the parameter ε affects some characteristics of the response: drift, velocity and base shear. All the results described till this point have been obtained by keeping the non-linearity of the behavior of the dampers. In order to get a linear formulation of the problem, that is possible to solve by using the well-known methods of the dynamics of structures, as we did before for the iterative methods by introducing the equivalent damping ratio, it is shown how the equivalent damping ratio can be evaluated from knowing the value of ε. Operating in this way, once the parameter ε is known, it is quite easy to estimate the equivalent damping ratio and to proceed with a classic linear analysis. In the last section it is shown how the parameter ε could be taken as reference for the evaluation of the convenience of using non-linear dampers instead of linear ones on the basis of the type of external force and the characteristics of the system. CHAPTER 4: MULTI-DEGREE OF FREEDOM SYSTEMS In this chapter the design methods of a elastic-linear mdf system equipped with non-linear fluidviscous dampers are introduced. It has already been shown that, in the sdf systems, the response of the structure can be evaluated through the estimation of the equivalent damping ratio (ξsd) assuming the behavior of the structure elastic-linear. We would to mention that some adjusting coefficients, to be applied to the equivalent damping ratio in order to consider the actual behavior of the structure (that is non-linear), have already been proposed in literature; such coefficients are usually expressed in terms of ductility, but their treatment is over the aims of this thesis and we does not go into further. The method usually proposed in literature is based on energy equivalence: even though this procedure has solid theoretical basis, it must necessary include some iterative process, because the expression of the equivalent damping ratio contains a term of the response. This procedure has been introduced primarily by Ramirez, Constantinou et al. in 2000. This procedure is reported in the first section and it is defined “Iterative Method”. Following the guide lines about sdf systems reported in the previous chapters, it is introduced a procedure for the assessment of the parameter ε in the case of mdf systems. Operating in this way the evaluation of the equivalent damping ratio (ξsd) can be done directly without implementing iterative processes. This procedure is defined “Direct Method” and it is reported in the second section. In the third section the two methods are analyzed by studying 4 cases of two moment-resisting steel frames undergoing real accelerogramms: the response of the system calculated by using the two methods is compared with the numerical response obtained from the software called SAP2000-NL, CSI product. In the last section a procedure to create spectra of the equivalent damping ratio, affected by the parameter ε and the natural period of the system for a fixed value of exponent α, starting from the elasticresponse spectra provided by any international code, is introduced.

Il Fantastico e gli Oggetti del primo Novecento

La ricerca si propone di inquisire il modo in cui il fantastico del primo Novecento utilizza la rappresentazione finzionale degli oggetti ai fini della propria emersione. Si ipotizza che certi schemi rappresentativi elaborati da autori fantastici come Hoffmann, Poe o Maupassant siano riscontrabili anche nella letteratura del XX secolo, e vengano reimpiegati per rispondere a una mutata situazione socioculturale. La tesi è bipartita: la prima parte, che è a sua volta suddivisa in due capitoli, funziona da cornice teorica e storica alle analisi testuali. Vi si discute del concetto di immagine; e da tale discussione viene derivata una precisa idea di spazio e di oggetto letterari. In seguito si procede a una ricostruzione della storia del fantastico ottocentesco (dalla quale non sono assenti riflessioni teoriche e in particolare genologiche), che da un lato è volta a storicizzare l’idea di “genere fantastico”; dall’altro ha come obiettivo l’identificazione di una tipologia di oggetti strutturalmente legata a quel genere narrativo. Due sono le classi di oggetti così individuate, e altrettanti i capitoli che compongono la seconda parte del lavoro. Entrambi i tipi di oggetto, che per semplicità si possono chiamare oggetti-feticcio e oggetti spettrali, stanno a metà strada tra immaginario e reale; ma mentre l’oggetto-feticcio ha qualcosa in più rispetto a un oggetto descritto realisticamente, l’oggetto spettrale ha un che di deficitario, e non giunge al risultato di una completa materializzazione. Tra gli autori affrontati compaiono Papini, Pirandello, Bontempelli, Savinio, Landolfi; né mancano riferimenti ad autori di altre nazioni da Kafka a Sartre, da James a Virginia Woolf, in ottemperanza all’idea di considerare il fantastico italiano all’interno di una più ampia geografia letteraria.

Azione e Riferimento

Che cos’è il riferimento? La risposta che difendo è che il riferimento è un atto che coinvolge un parlante, un’espressione linguistica e uno specifico oggetto, in una data occasione d’uso. Nel primo capitolo, inquadro storicamente il dibattito sul riferimento opponendo il modello soddisfazionale à la Russell a quello referenziale à la Donnellan. Introduco la teoria russelliana su nomi propri e descrizioni definite e difendo la tesi che gli usi referenziali siano caratterizzati da una direzione di adattamento inversa rispetto al modello soddisfazionale. Nel secondo capitolo, sostengo che il riferimento è un’azione che può essere felice o infelice, a seconda che il parlante ne rispetti i vincoli o meno. Analizzo due condizioni necessarie del riferimento: che vi sia un legame causale tra parlante, espressione e referente, e che le parole siano usate convenzionalmente. Normalmente, si parla di fallimento referenziale solo quando il presunto referente non esiste, mentre io propongo di usare l’espressione per i riferimenti infelici. Secondo e terzo capitolo equiparano più tipi di espressioni in merito al riferimento. Insisto sulla dipendenza contestuale di nomi propri e descrizioni definite (sia usate referenzialmente che attributivamente). Due degli argomenti usati sono basati sui nomi omofoni e omografi e sulle descrizioni definite incomplete. Infine sintetizzo i punti precedenti in una proposta originale. L’atto referenziale, di cui ho difeso la possibilità che fallisca, è dipendente anche dall’essere teso verso la comunicazione. Per illustrare il punto confronto il processo di istituzione di una convenzione con l’uso di una convenzione già istituita. Il progetto è di dare un resoconto del riferimento bilanciato tra l’uso del linguaggio incentrato sul soggetto e i suoi legami con il mondo, da una parte, e le espressioni linguistiche, strumenti per ottenere risultati all’interno di una data comunità, dall’altra parte. L’atto referenziale, sostengo, ha diverse gradazioni di efficacia dipendenti da tutti questi elementi.

Strategie nutrizionali finalizzate alla modulazione del microbiota intestinale del cane e del gatto

Il microbiota intestinale riveste un ruolo importantissimo nell’influenzare la salute dell’ospite. È stato dimostrato come la composizione della dieta possa condizionare lo stato di benessere dell’animale, inducendo importanti cambiamenti tra le popolazioni batteriche che coabitano l’intestino; l’uso di prebiotici rappresenta una delle strategie maggiormente impiegate per modulare positivamente la composizione ed il metabolismo dell’ecosistema gastroenterico. Il presente progetto di dottorato si è proposto di indagare gli effetti sul microbiota intestinale del cane e del gatto di diete a diverso tenore proteico e contenenti proteine di diversa digeribilità in presenza o meno di sostanze prebiotiche. Inoltre, sono stati valutati gli effetti della presenza di un estratto di Yucca schidigera e di tannini sulla microflora intestinale del gatto. In ultima istanza, sono state valutate le conseguenze di dosi crescenti di lattosio sul benessere intestinale del cane. I risultati del presente studio hanno rilevato come le sostanze prebiotiche influiscono sulla composizione e sul metabolismo della microflora del cane e del gatto, e come l’impiego di diete ricche di proteine possa avere conseguenze negative sull’ambiente intestinale. Tuttavia, la presenza di oligosaccaridi non sembra contrastare gli effetti negativi che diete ad alto tenore proteico potrebbero avere sull’ecosistema intestinale dell’animale. Nella successiva prova è stato evidenziato come l’inclusione nella dieta di estratti di Yucca e tannini possa contribuire a mitigare l’emanazione di sostanze maleodoranti dalle deiezioni degli animali da compagnia. Nel corso dell’ultima prova, nonostante non siano state osservate differenze tra le popolazioni microbiche intestinali, la somministrazione di dosi crescenti di lattosio ha indotto una certa riduzione delle fermentazioni proteolitiche microbiche. Ulteriori studi sono necessari per stabilire in che misura la dieta e gli alimenti “funzionali” possano influire sul microbiota intestinale del cane e del gatto e come queste informazioni possono essere utilizzate per migliorare miratamente l’alimentazione e lo stato di salute degli animali da compagnia.