Giunzione mediante laser di materiali difficili, ibridi ed a struttura cellulare

Lo studio presentato in questa sede concerne applicazioni di saldatura LASER caratterizzate da aspetti di non-convenzionalità ed è costituito da tre filoni principali. Nel primo ambito di intervento è stata valutata la possibilità di effettuare saldature per fusione, con LASER ad emissione continua, su pannelli Aluminum Foam Sandwich e su tubi riempiti in schiuma di alluminio. Lo studio ha messo in evidenza numerose linee operative riguardanti le problematiche relative alla saldatura delle pelli esterne dei componenti ed ha dimostrato la fattibilità relativa ad un approccio di giunzione LASER integrato (saldatura seguita da un post trattamento termico) per la realizzazione della giunzione completa di particolari tubolari riempiti in schiuma con ripristino della struttura cellulare all’interfaccia di giunzione. Il secondo ambito di intervento è caratterizzato dall’applicazione di una sorgente LASER di bassissima potenza, operante in regime ad impulsi corti, nella saldatura di acciaio ad elevato contenuto di carbonio. Lo studio ha messo in evidenza come questo tipo di sorgente, solitamente applicata per lavorazioni di ablazione e marcatura, possa essere applicata anche alla saldatura di spessori sub-millimetrici. In questa fase è stato messo in evidenza il ruolo dei parametri di lavoro sulla conformazione del giunto ed è stata definita l’area di fattibilità del processo. Lo studio è stato completato investigando la possibilità di applicare un trattamento LASER dopo saldatura per addolcire le eventuali zone indurite. In merito all’ultimo ambito di intervento l’attività di studio si è focalizzata sull’utilizzo di sorgenti ad elevata densità di potenza (60 MW/cm^2) nella saldatura a profonda penetrazione di acciai da costruzione. L’attività sperimentale e di analisi dei risultati è stata condotta mediante tecniche di Design of Experiment per la valutazione del ruolo preciso di tutti i parametri di processo e numerose considerazioni relative alla formazione di cricche a caldo sono state suggerite.

L'a(rche)tipico Brian O'Nolan. Comico e riso dalla tradizione al post-

This study aims at analysing Brian O'Nolans literary production in the light of a reconsideration of the role played by his two most famous pseudonyms ,Flann Brien and Myles na Gopaleen, behind which he was active both as a novelist and as a journalist. We tried to establish a new kind of relationship between them and their empirical author following recent cultural and scientific surveys in the field of Humour Studies, Psychology, and Sociology: taking as a starting point the appreciation of the comic attitude in nature and in cultural history, we progressed through a short history of laughter and derision, followed by an overview on humour theories. After having established such a frame, we considered an integration of scientific studies in the field of laughter and humour as a base for our study scheme, in order to come to a definition of the comic author as a recognised, powerful and authoritative social figure who acts as a critic of conventions. The history of laughter and comic we briefly summarized, based on the one related by the French scholar Georges Minois in his work (Minois 2004), has been taken into account in the view that humorous attitude is one of man’s characteristic traits always present and witnessed throughout the ages, though subject in most cases to repression by cultural and political conservative power. This sort of Super-Ego notwithstanding, or perhaps because of that, comic impulse proved irreducible exactly in its influence on the current cultural debates. Basing mainly on Robert R. Provine’s (Provine 2001), Fabio Ceccarelli’s (Ceccarelli 1988), Arthur Koestler’s (Koestler 1975) and Peter L. Berger’s (Berger 1995) scientific essays on the actual occurrence of laughter and smile in complex social situations, we underlined the many evidences for how the use of comic, humour and wit (in a Freudian sense) could be best comprehended if seen as a common mind process designed for the improvement of knowledge, in which we traced a strict relation with the play-element the Dutch historian Huizinga highlighted in his famous essay, Homo Ludens (Huizinga 1955). We considered comic and humour/wit as different sides of the same coin, and showed how the demonstrations scientists provided on this particular subject are not conclusive, given that the mental processes could not still be irrefutably shown to be separated as regards graduations in comic expression and reception: in fact, different outputs in expressions might lead back to one and the same production process, following the general ‘Economy Rule’ of evolution; man is the only animal who lies, meaning with this that one feeling is not necessarily biuniquely associated with one and the same outward display, so human expressions are not validation proofs for feelings. Considering societies, we found that in nature they are all organized in more or less the same way, that is, in élites who govern over a community who, in turn, recognizes them as legitimate delegates for that task; we inferred from this the epistemological possibility for the existence of an added ruling figure alongside those political and religious: this figure being the comic, who is the person in charge of expressing true feelings towards given subjects of contention. Any community owns one, and his very peculiar status is validated by the fact that his place is within the community, living in it and speaking to it, but at the same time is outside it in the sense that his action focuses mainly on shedding light on ideas and objects placed out-side the boundaries of social convention: taboos, fears, sacred objects and finally culture are the favourite targets of the comic person’s arrow. This is the reason for the word a(rche)typical as applied to the comic figure in society: atypical in a sense, because unconventional and disrespectful of traditions, critical and never at ease with unblinkered respect of canons; archetypical, because the “village fool”, buffoon, jester or anyone in any kind of society who plays such roles, is an archetype in the Jungian sense, i.e. a personification of an irreducible side of human nature that everybody instinctively knows: a beginner of a tradition, the perfect type, what is most conventional of all and therefore the exact opposite of an atypical. There is an intrinsic necessity, we think, of such figures in societies, just like politicians and priests, who should play an elitist role in order to guide and rule not for their own benefit but for the good of the community. We are not naïve and do know that actual owners of power always tend to keep it indefinitely: the ‘social comic’ as a role of power has nonetheless the distinctive feature of being the only job whose tension is not towards stability. It has got in itself the rewarding permission of contradiction, for the very reason we exposed before that the comic must cast an eye both inside and outside society and his vision may be perforce not consistent, then it is satisfactory for the popularity that gives amongst readers and audience. Finally, the difference between governors, priests and comic figures is the seriousness of the first two (fundamentally monologic) and the merry contradiction of the third (essentially dialogic). MPs, mayors, bishops and pastors should always console, comfort and soothe popular mood in respect of the public convention; the comic has the opposite task of provoking, urging and irritating, accomplishing at the same time a sort of control of the soothing powers of society, keepers of the righteousness. In this view, the comic person assumes a paramount importance in the counterbalancing of power administration, whether in form of acting in public places or in written pieces which could circulate for private reading. At this point comes into question our Irish writer Brian O'Nolan(1911-1966), real name that stood behind the more famous masks of Flann O'Brien, novelist, author of At Swim-Two-Birds (1939), The Hard Life (1961), The Dalkey Archive (1964) and, posthumously, The Third Policeman (1967); and of Myles na Gopaleen, journalist, keeper for more than 25 years of the Cruiskeen Lawn column on The Irish Times (1940-1966), and author of the famous book-parody in Irish An Béal Bocht (1941), later translated in English as The Poor Mouth (1973). Brian O'Nolan, professional senior civil servant of the Republic, has never seen recognized his authorship in literary studies, since all of them concentrated on his alter egos Flann, Myles and some others he used for minor contributions. So far as we are concerned, we think this is the first study which places the real name in the title, this way acknowledging him an unity of intents that no-one before did. And this choice in titling is not a mere mark of distinction for the sake of it, but also a wilful sign of how his opus should now be reconsidered. In effect, the aim of this study is exactly that of demonstrating how the empirical author Brian O'Nolan was the real Deus in machina, the master of puppets who skilfully directed all of his identities in planned directions, so as to completely fulfil the role of the comic figure we explained before. Flann O'Brien and Myles na Gopaleen were personae and not persons, but the impression one gets from the critical studies on them is the exact opposite. Literary consideration, that came only after O'Nolans death, began with Anne Clissmann’s work, Flann O'Brien: A Critical Introduction to His Writings (Clissmann 1975), while the most recent book is Keith Donohue’s The Irish Anatomist: A Study of Flann O'Brien (Donohue 2002); passing through M.Keith Booker’s Flann O'Brien, Bakhtin and Menippean Satire (Booker 1995), Keith Hopper’s Flann O'Brien: A Portrait of the Artist as a Young Post-Modernist (Hopper 1995) and Monique Gallagher’s Flann O'Brien, Myles et les autres (Gallagher 1998). There have also been a couple of biographies, which incidentally somehow try to explain critical points his literary production, while many critical studies do the same on the opposite side, trying to found critical points of view on the author’s restless life and habits. At this stage, we attempted to merge into O'Nolan's corpus the journalistic articles he wrote, more than 4,200, for roughly two million words in the 26-year-old running of the column. To justify this, we appealed to several considerations about the figure O'Nolan used as writer: Myles na Gopaleen (later simplified in na Gopaleen), who was the equivalent of the street artist or storyteller, speaking to his imaginary public and trying to involve it in his stories, quarrels and debates of all kinds. First of all, he relied much on language for the reactions he would obtain, playing on, and with, words so as to ironically unmask untrue relationships between words and things. Secondly, he pushed to the limit the convention of addressing to spectators and listeners usually employed in live performing, stretching its role in the written discourse to come to a greater effect of involvement of readers. Lastly, he profited much from what we labelled his “specific weight”, i.e. the potential influence in society given by his recognised authority in determined matters, a position from which he could launch deeper attacks on conventional beliefs, so complying with the duty of a comic we hypothesised before: that of criticising society even in threat of losing the benefits the post guarantees. That seemingly masochistic tendency has its rationale. Every representative has many privileges on the assumption that he, or she, has great responsibilities in administrating. The higher those responsibilities are, the higher is the reward but also the severer is the punishment for the misfits done while in charge. But we all know that not everybody accepts the rules and many try to use their power for their personal benefit and do not want to undergo law’s penalties. The comic, showing in this case more civic sense than others, helped very much in this by the non-accessibility to the use of public force, finds in the role of the scapegoat the right accomplishment of his task, accepting the punishment when his breaking of the conventions is too stark to be forgiven. As Ceccarelli demonstrated, the role of the object of laughter (comic, ridicule) has its very own positive side: there is freedom of expression for the person, and at the same time integration in the society, even though at low levels. Then the banishment of a ‘social’ comic can never get to total extirpation from society, revealing how the scope of the comic lies on an entirely fictional layer, bearing no relation with facts, nor real consequences in terms of physical health. Myles na Gopaleen, mastering these three characteristics we postulated in the highest way, can be considered an author worth noting; and the oeuvre he wrote, the whole collection of Cruiskeen Lawn articles, is rightfully a novel because respects the canons of it especially regarding the authorial figure and his relationship with the readers. In addition, his work can be studied even if we cannot conduct our research on the whole of it, this proceeding being justified exactly because of the resemblances to the real figure of the storyteller: its ‘chapters’ —the daily articles— had a format that even the distracted reader could follow, even one who did not read each and every article before. So we can critically consider also a good part of them, as collected in the seven volumes published so far, with the addition of some others outside the collections, because completeness in this case is not at all a guarantee of a better precision in the assessment; on the contrary: examination of the totality of articles might let us consider him as a person and not a persona. Once cleared these points, we proceeded further in considering tout court the works of Brian O'Nolan as the works of a unique author, rather than complicating the references with many names which are none other than well-wrought sides of the same personality. By putting O'Nolan as the correct object of our research, empirical author of the works of the personae Flann O'Brien and Myles na Gopaleen, there comes out a clearer literary landscape: the comic author Brian O'Nolan, self-conscious of his paramount role in society as both a guide and a scourge, in a word as an a(rche)typical, intentionally chose to differentiate his personalities so as to create different perspectives in different fields of knowledge by using, in addition, different means of communication: novels and journalism. We finally compared the newly assessed author Brian O'Nolan with other great Irish comic writers in English, such as James Joyce (the one everybody named as the master in the field), Samuel Beckett, and Jonathan Swift. This comparison showed once more how O'Nolan is in no way inferior to these authors who, greatly celebrated by critics, have nonetheless failed to achieve that great public recognition O’Nolan received alias Myles, awarded by the daily audience he reached and influenced with his Cruiskeen Lawn column. For this reason, we believe him to be representative of the comic figure’s function as a social regulator and as a builder of solidarity, such as that Raymond Williams spoke of in his work (Williams 1982), with in mind the aim of building a ‘culture in common’. There is no way for a ‘culture in common’ to be acquired if we do not accept the fact that even the most functional society rests on conventions, and in a world more and more ‘connected’ we need someone to help everybody negotiate with different cultures and persons. The comic gives us a worldly perspective which is at the same time comfortable and distressing but in the end not harmful as the one furnished by politicians could be: he lets us peep into parallel worlds without moving too far from our armchair and, as a consequence, is the one who does his best for the improvement of our understanding of things.

Trasmissione post-natale del citomegalovirus attraverso il latte materno al neonato VLBW

Introduction Postnatal human cytomegalovirus (CMV) infection is usually asymptomatic in term babies, while preterm infants are more susceptible to symptomatic CMV infection. Breastfeeding plays a dominant role in the epidemiology of transmission of postnatal CMV infection, but the risk factors of symptomatic CMV infection in preterm infants are unknown. Patients and Methods Between December 2003 and August 2006, eighty Very Low Birth Weight (VLBW) preterm infants (gestational age ≤ 32 weeks and birth weight < 1500 g), admitted to the Neonatal Intensive Care Unit of St Orsola-Malpighi General Hospital, Bologna were recruited. All of them were breastfed for at least one month. During the first week of life, serological test for CMV was performed on maternal blood. Furthermore, urinary CMV culture was performed in all the infants in order to exclude a congenital CMV infection. Urine samples from each infant were collected and processed for CMV culture once a week. Once every 15 days a blood sample was taken from each infant to evaluate the complete blood count, the hepatic function and the C reactive protein. In addition, samples of fresh breast milk were processed weekly for CMV culture. A genetic analysis of virus variant was performed in the urine of the infected infants and in their mother’s milk to confirm the origin of infection. Results We evaluated 80 VLBW infants and their 68 mothers. Fifty-three mothers (78%) were positive for CMV IgG antibodies, and 15 (22%) were seronegative. In the seronegative group, CMV was never isolated in breast milk, and none of the 18 infants developed viruria; in the seropositive group, CMV was isolated in 21 out of 53 (40%) mother’s milk. CMV was detected in the urine samples of 9 out of 26 (35%) preterm infants, who were born from 21 virolactia positive mothers. Six of these infants had clinically asymptomatic CMV infection, while 3 showed a sepsis-like illness with bradycardia, tachypnea and repeated desaturations. Eight out of nine infants showed abnormal hematologic values. The detection of neutropenia was strictly related to CMV infection (8/9 infected infants vs 17/53 non infected infants, P<.005), such as the detection of an increase in conjugated bilirubin (3/9 infected infants vs 2/53 non infected infants, P<.05). The degree of neutropenia was not different between the two groups (infected/non infected). The use of hemoderivatives (plasma and/or IgM–enriched immunoglobulin) in order to treat a suspected/certain infection in newborn with GE< 28 ws was seen as protective against CMV infection (1/4 infected infants vs 18/20 non infected infants [GE<28 ws]; P<.05). Furthermore, bronchopulmonary dysplasia (defined both as oxygen-dependency at 30 days of life and 36 ws of postmenstrual age) correlated with symptomatic infection (3/3 symptomatic vs 0/6 asymptomatic: P<.05). Conclusion Our data suggest that CMV infection transmitted to preterm newborn through human milk is always asymptomatic when newborns are clinically stable. Otherwise, the infection can worsen a preexisting disease such as bronchopulmonary dysplasia. Human milk offers many nutritional and psychological advantages to preterm newborns: according to our data, there’s no reason to contraindicate it neither to pasteurize the milk of all the mothers of preterm infants who are CMV seropositive.

Biomass Gasification - Process analysis and dimensioning aspects for downdraft units and gas cleaning lines

In such territories where food production is mostly scattered in several small / medium size or even domestic farms, a lot of heterogeneous residues are produced yearly, since farmers usually carry out different activities in their properties. The amount and composition of farm residues, therefore, widely change during year, according to the single production process periodically achieved. Coupling high efficiency micro-cogeneration energy units with easy handling biomass conversion equipments, suitable to treat different materials, would provide many important advantages to the farmers and to the community as well, so that the increase in feedstock flexibility of gasification units is nowadays seen as a further paramount step towards their wide spreading in rural areas and as a real necessity for their utilization at small scale. Two main research topics were thought to be of main concern at this purpose, and they were therefore discussed in this work: the investigation of fuels properties impact on gasification process development and the technical feasibility of small scale gasification units integration with cogeneration systems. According to these two main aspects, the present work was thus divided in two main parts. The first one is focused on the biomass gasification process, that was investigated in its theoretical aspects and then analytically modelled in order to simulate thermo-chemical conversion of different biomass fuels, such as wood (park waste wood and softwood), wheat straw, sewage sludge and refuse derived fuels. The main idea is to correlate the results of reactor design procedures with the physical properties of biomasses and the corresponding working conditions of gasifiers (temperature profile, above all), in order to point out the main differences which prevent the use of the same conversion unit for different materials. At this scope, a gasification kinetic free model was initially developed in Excel sheets, considering different values of air to biomass ratio and the downdraft gasification technology as particular examined application. The differences in syngas production and working conditions (process temperatures, above all) among the considered fuels were tried to be connected to some biomass properties, such elementary composition, ash and water contents. The novelty of this analytical approach was the use of kinetic constants ratio in order to determine oxygen distribution among the different oxidation reactions (regarding volatile matter only) while equilibrium of water gas shift reaction was considered in gasification zone, by which the energy and mass balances involved in the process algorithm were linked together, as well. Moreover, the main advantage of this analytical tool is the easiness by which the input data corresponding to the particular biomass materials can be inserted into the model, so that a rapid evaluation on their own thermo-chemical conversion properties is possible to be obtained, mainly based on their chemical composition A good conformity of the model results with the other literature and experimental data was detected for almost all the considered materials (except for refuse derived fuels, because of their unfitting chemical composition with the model assumptions). Successively, a dimensioning procedure for open core downdraft gasifiers was set up, by the analysis on the fundamental thermo-physical and thermo-chemical mechanisms which are supposed to regulate the main solid conversion steps involved in the gasification process. Gasification units were schematically subdivided in four reaction zones, respectively corresponding to biomass heating, solids drying, pyrolysis and char gasification processes, and the time required for the full development of each of these steps was correlated to the kinetics rates (for pyrolysis and char gasification processes only) and to the heat and mass transfer phenomena from gas to solid phase. On the basis of this analysis and according to the kinetic free model results and biomass physical properties (particles size, above all) it was achieved that for all the considered materials char gasification step is kinetically limited and therefore temperature is the main working parameter controlling this step. Solids drying is mainly regulated by heat transfer from bulk gas to the inner layers of particles and the corresponding time especially depends on particle size. Biomass heating is almost totally achieved by the radiative heat transfer from the hot walls of reactor to the bed of material. For pyrolysis, instead, working temperature, particles size and the same nature of biomass (through its own pyrolysis heat) have all comparable weights on the process development, so that the corresponding time can be differently depending on one of these factors according to the particular fuel is gasified and the particular conditions are established inside the gasifier. The same analysis also led to the estimation of reaction zone volumes for each biomass fuel, so as a comparison among the dimensions of the differently fed gasification units was finally accomplished. Each biomass material showed a different volumes distribution, so that any dimensioned gasification unit does not seem to be suitable for more than one biomass species. Nevertheless, since reactors diameters were found out quite similar for all the examined materials, it could be envisaged to design a single units for all of them by adopting the largest diameter and by combining together the maximum heights of each reaction zone, as they were calculated for the different biomasses. A total height of gasifier as around 2400mm would be obtained in this case. Besides, by arranging air injecting nozzles at different levels along the reactor, gasification zone could be properly set up according to the particular material is in turn gasified. Finally, since gasification and pyrolysis times were found to considerably change according to even short temperature variations, it could be also envisaged to regulate air feeding rate for each gasified material (which process temperatures depend on), so as the available reactor volumes would be suitable for the complete development of solid conversion in each case, without even changing fluid dynamics behaviour of the unit as well as air/biomass ratio in noticeable measure. The second part of this work dealt with the gas cleaning systems to be adopted downstream the gasifiers in order to run high efficiency CHP units (i.e. internal engines and micro-turbines). Especially in the case multi–fuel gasifiers are assumed to be used, weightier gas cleaning lines need to be envisaged in order to reach the standard gas quality degree required to fuel cogeneration units. Indeed, as the more heterogeneous feed to the gasification unit, several contaminant species can simultaneously be present in the exit gas stream and, as a consequence, suitable gas cleaning systems have to be designed. In this work, an overall study on gas cleaning lines assessment is carried out. Differently from the other research efforts carried out in the same field, the main scope is to define general arrangements for gas cleaning lines suitable to remove several contaminants from the gas stream, independently on the feedstock material and the energy plant size The gas contaminant species taken into account in this analysis were: particulate, tars, sulphur (in H2S form), alkali metals, nitrogen (in NH3 form) and acid gases (in HCl form). For each of these species, alternative cleaning devices were designed according to three different plant sizes, respectively corresponding with 8Nm3/h, 125Nm3/h and 350Nm3/h gas flows. Their performances were examined on the basis of their optimal working conditions (efficiency, temperature and pressure drops, above all) and their own consumption of energy and materials. Successively, the designed units were combined together in different overall gas cleaning line arrangements, paths, by following some technical constraints which were mainly determined from the same performance analysis on the cleaning units and from the presumable synergic effects by contaminants on the right working of some of them (filters clogging, catalysts deactivation, etc.). One of the main issues to be stated in paths design accomplishment was the tars removal from the gas stream, preventing filters plugging and/or line pipes clogging At this scope, a catalytic tars cracking unit was envisaged as the only solution to be adopted, and, therefore, a catalytic material which is able to work at relatively low temperatures was chosen. Nevertheless, a rapid drop in tars cracking efficiency was also estimated for this same material, so that an high frequency of catalysts regeneration and a consequent relevant air consumption for this operation were calculated in all of the cases. Other difficulties had to be overcome in the abatement of alkali metals, which condense at temperatures lower than tars, but they also need to be removed in the first sections of gas cleaning line in order to avoid corrosion of materials. In this case a dry scrubber technology was envisaged, by using the same fine particles filter units and by choosing for them corrosion resistant materials, like ceramic ones. Besides these two solutions which seem to be unavoidable in gas cleaning line design, high temperature gas cleaning lines were not possible to be achieved for the two larger plant sizes, as well. Indeed, as the use of temperature control devices was precluded in the adopted design procedure, ammonia partial oxidation units (as the only considered methods for the abatement of ammonia at high temperature) were not suitable for the large scale units, because of the high increase of reactors temperature by the exothermic reactions involved in the process. In spite of these limitations, yet, overall arrangements for each considered plant size were finally designed, so that the possibility to clean the gas up to the required standard degree was technically demonstrated, even in the case several contaminants are simultaneously present in the gas stream. Moreover, all the possible paths defined for the different plant sizes were compared each others on the basis of some defined operational parameters, among which total pressure drops, total energy losses, number of units and secondary materials consumption. On the basis of this analysis, dry gas cleaning methods proved preferable to the ones including water scrubber technology in al of the cases, especially because of the high water consumption provided by water scrubber units in ammonia adsorption process. This result is yet connected to the possibility to use activated carbon units for ammonia removal and Nahcolite adsorber for chloride acid. The very high efficiency of this latter material is also remarkable. Finally, as an estimation of the overall energy loss pertaining the gas cleaning process, the total enthalpy losses estimated for the three plant sizes were compared with the respective gas streams energy contents, these latter obtained on the basis of low heating value of gas only. This overall study on gas cleaning systems is thus proposed as an analytical tool by which different gas cleaning line configurations can be evaluated, according to the particular practical application they are adopted for and the size of cogeneration unit they are connected to.