Patologie da Porcine Circovirus tipo 2 (PCV2) nel suino

The main work involved the PMWS (Post-weaning multisystemic Wasting Syndrome), caused by PCV-2 (Porcine Circovirus type 2) that involved post-weaned pigs. Merial Italy has funded a study activity in which groups of 3-5 animals were sampled for lungs, tracheo-bronchial and superficial inguinal lymph nodes, ileum and tonsils. The protocol applied can be identified as a more diagnostic potential on the individual than on the group. PNP. Another investigation has been conducted to study proliferative and necrotizing pneumonia (PNP), a form of interstitial pneumonia in weaning and post-weaning pigs characterized by hypertrophy and hyperplasia of type II pneumocytes, coagulative necrosis and granular debris within alveolar spaces. Many studies suggest porcine reproductive and respiratory syndrome virus (PRRSV) and porcine circovirus type 2 (PCV2) as the main causes of the disease, but Aujeszky disease virus (ADV) and swine influenza virus (SIV) are also considered. An immunohistochemical study was carried out to evaluate the role of these viruses in PNP lesions in Italy. PNP results primarily associated with PRRSV, even if co-infection is characterized by more severe histological features. Reproductive pathology. A major risk factor for PCV2 infection is a viraemic episode taking place in pregnant sows with low antibody titer which is transmitted by specific PCV2 products of conception. PCV2 can infect the fetus even by vehicles through infected semen or ova, or as a result of infection of the genital tract. An investigation was carried out to identify the presence and localization of PCV2 in the genital tracts of sows experimentally infected with PCV2 and in their fetuses. The results obtained suggest that: conventional sows can be infected by intrauterine exposition; low antibody titres increase the probability of infection; PCV2 infection close to insemination time reduces the pregnancy rate; placental lesions may represent an additional cause of fetal suffering.

Ruolo del Porcine Circovirus tipo 2 (PCV2) nella patologia riproduttiva del suino

La tesi è organizzata in 4 capitoli: -nel primo vengono brevemente riferite le patologie associate all’infezione da PCV2 con particolare riferimento all’iter diagnostico ed al ruolo rivestito dall’esame istologico e dalla identificazione dell’agente eziologico in situ contestualmente alle lesioni istologiche; -nel secondo viene presentato un iter diagnostico originale da applicare in condizioni di campo, qualora si voglia accertare la presenza del PCV2 nei tessuti dei prodotti di natimortalità/aborto del suino. In specifico si riferisce all’applicazione del protocollo in 2 aziende ed i risultati vengono analizzati per una revisione critica del protocollo impiegato; -nel terzo vengono presentati i risultati di un protocollo di infezione con PCV2 per via genitale tramite seme infetto. Scrofe convenzionali sono state sincronizzate per l’estro e fecondate con un’unica dose di seme PCV2 negativo alla PCR (gruppo controlli) o sperimentalmente esposto al PCV2 (gruppo infette). I risultati vengono analizzati in funzione delle ripercussioni che l’infezione precoce in gravidanza può produrre sulla scrofa (mancata gravidanza, ritorno in calore), sui feti e sugli invogli fetali. Viene stabilito il ruolo protettivo degli anticorpi circolanti al momento dell’infezione, stante l’evenienza che un basso titolo anticorpale si associa a viremia prolungata e maggiore numero di feti positivi al virus; -nel quarto viene presentato un esperimento sovrapponibile a quello riferito nel capitolo 3, però con la presenza anche di un gruppo di soggetti convenzionali vaccinati ed infettati con PCV2 durante la fecondazione artificiale usando seme sperimentalmente esposto al virus. Nella discussione dei risultati vengono enfatizzati 2 aspetti importanti nell’epidemiologia dell’infezione da PCV2: la eliminazione di virus è fortemente ridotta dalla vaccinazione, con conseguenze verosimilmente positive sulla circolazione del virus negli effettivi dell’allevamento; l’esposizione uterina è protetta dalla vaccinazione, stante la bassa percentuale di placente infette nel gruppo dei soggetti vaccinati rispetto a quelli non vaccinati e nei controlli.

The porcine animal model goes through the 3Rs: development of in vitro and ex vivo system to study vascular biology

Since the publication of the book of Russell and Burch in 1959, scientific research has never stopped improving itself with regard to the important issue of animal experimentation. The European Directive 2010/63/EU “On the protection of animals used for scientific purposes” focuses mainly on the animal welfare, fixing the Russell and Burch’s 3Rs principles as the foundations of the document. In particular, the legislator clearly states the responsibility of the scientific community to improve the number of alternative methods to animal experimentation. The swine is considered a species of relevant interest for translational research and medicine due to its biological similarities with humans. The surgical community has, in fact, recognized the swine as an excellent model replicating the human cardiovascular system. There have been several wild-type and transgenic porcine models which were produced for biomedicine and translational research. Among these, the cardiovascular ones are the most represented. The continuous involvement of the porcine animal model in the biomedical research, as the continuous advances achieved using swine in translational medicine, support the need for alternative methods to animal experimentation involving pigs. The main purpose of the present work was to develop and characterize novel porcine alternative methods for cardiovascular translational biology/medicine. The work was mainly based on two different models: the first consisted in an ex vivo culture of porcine aortic cylinders and the second consisted in an in vitro culture of porcine aortic derived progenitor cells. Both the models were properly characterized and results indicated that they could be useful to the study of vascular biology. Nevertheless, both the models aim to reduce the use of experimental animals and to refine animal based-trials. In conclusion, the present research aims to be a small, but significant, contribution to the important and necessary field of study of alternative methods to animal experimentation.

Percutaneous Cement Discoplasty: Biomechanical and clinical assessment of a minimally invasive treatment of lumbar intervertebral disc disease

With population ageing, spine diseases have an increasing prevalence and induce high economic and social costs. The development of minimally invasive surgeries allows reducing the surgery-associated risks in elderly and polymorbid patients, and save costs by treating more patients in shorter time and reducing the complications. Percutaneous Cement Discoplasty (PCD) is a minimally invasive technique developed to treat highly degenerated intervertebral discs exhibiting a vacuum phenomenon. Filling the disc with bone cement creates a stand-alone spacer which partially restores the disc height and re-opens the foraminal space. PCD has recently been introduced to clinical use. However, the spine biomechanics following this treatment remained unravelled. The aim of this PhD thesis is to bridge the clinical experience with in vitro methodologies, to provide a multilateral evaluation of PCD outcome and a better understanding of its impact on the spine biomechanics, and of its possible contraindications. Firstly, a suitable in vitro porcine model to test the biomechanics of discoplasty by comparing specimens in the preoperative and postoperative conditions was developed. The methodology was then applied to investigate the biomechanics of discoplasty in cadaveric human segments. The in vitro specimens were mechanically investigated in flexion and extension, while a DIC system quantified the range of motion, disc height, and strains on the disc surface. Then, a versatile tool to measure the impact of discoplasty on the foramen space was developed and applied both to clinical and experimental work. The vertebrae reconstructed from CT scans were registered to match the loading configuration, using ex vivo DIC measurements under loading. The foramen volumetric changes caused by PCD was measured using a 3D geometrical method clinically developed by the research group. In conclusion, this project significantly extended the understanding of PCD biomechanics, highlighting its benefits in the treatment of advanced cases of intervertebral disc degeneration.

Planning and assessment techniques for spine surgeries

The rate of diagnosis and treatment of degenerative spine disorders is increasing, increasing the need for surgical intervention. Posterior spine fusion is one surgical intervention used to treat various spine degeneration pathologies To minimize the risk of complications and provide patients with positive outcomes, preoperative planning and postsurgical assessment are necessary. This PhD aimed to investigate techniques for the surgical planning and assessment of spine surgeries. Three main techniques were assessed: stereophotogrammetric motion analysis, 3D printing of complex spine deformities and finite element analysis of the thoracolumbar spine. Upon reviewing the literature on currently available spine kinematics protocol, a comprehensive motion analysis protocol to measure the multi-segmental spine motion was developed. Using this protocol, the patterns of spine motion in patients before and after posterior spine fixation was mapped. The second part investigated the use of virtual and 3D printed spine models for the surgical planning of complex spine deformity correction. Compared to usual radiographic images, the printed model allowed optimal surgical intervention, reduced surgical time and provided better surgeon-patient communication. The third part assessed the use of polyetheretherketone rods auxiliary to titanium rods to reduce the stiffness of posterior spine fusion constructs. Using a finite element model of the thoracolumbar spine, the rods system showed a decrease in the overall stress of the uppermost instrumented vertebra when compared to regular fixation approaches. Finally, a retrospective biomechanical assessment of a lumbopelvic reconstruction technique was investigated to assess the patients' gait following the surgery, the implant deformation over the years and the extent of bony fusion between spine and implant. In conclusion, this thesis highlighted the need to provide surgeons with new planning and assessment techniques to better understand postsurgical complications. The methodologies investigated in this project can be used in the future to establish a patient-specific planning protocol.

Development of a porcine lactation model for the evaluation of mammary transfer of exogenous molecules - A contribution from the conception project

Around 5 million women give birth each year in Europe and, while breastfeeding, the majority of them may need to take medications, either occasionally or continuously. Unfortunately, there is often scarce evidence of trustworthy information about how a specific molecule might affect the physiology of lactation. This is the reason that brought a European public-private partnership to fund the development of a reliable platform to provide women and health-care professionals a helpful instrument to reduce uncertainty about the effects of medication used during breastfeeding. On April 1st 2019, the ConcePTION project (Grant Agreement n°821520) started to develop such envisaged platform. The 3rd Work Package was in charge of the validation of in vitro, in vivo and in silico lactation models. Between the numerous species currently used in preclinical studies, pigs’ similarities with humans’ anatomy, physiology and genomics make them extremely useful as translational models, when proper veterinary expertise is applied. The ASA team from the University of Bologna, went first to characterize the translational lactation model using the swine species, chosen upon literature review. The aim of this work was to lay the foundations of a porcine lactation model that could be suitable for application within pharmaceutical tests, to study drug transfer through milk prior approval and commercialization. The obtained results highlighted both strengths and critical points of the study design, allowing a significant improvement in the knowledge of pharmacokinetic physiology in lactating mammals. Lastly, this project allowed the assessment of microbial changes in gut resident bacteria of newborns through an innovative in vitro colonic model. Indeed, even if there were no evident adverse effects determined by drug residues in milk, possible alterations in the delicate microbial ecology of newborns’ gastrointestinal tract was considered pivotal, giving its possible impact on the individual health and growth.

Numerical simulations of the spine for patient-specific models of severe scoliosis

In silico methods, such as musculoskeletal modelling, may aid the selection of the optimal surgical treatment for highly complex pathologies such as scoliosis. Many musculoskeletal models use a generic, simplified representation of the intervertebral joints, which are fundamental to the flexibility of the spine. Therefore, to model and simulate the spine, a suitable representation of the intervertebral joint is crucial. The aim of this PhD was to characterise specimen-specific models of the intervertebral joint for multi-body models from experimental datasets. First, the project investigated the characterisation of a specimen-specific lumped parameter model of the intervertebral joint from an experimental dataset of a four-vertebra lumbar spine segment. Specimen-specific stiffnesses were determined with an optimisation method. The sensitivity of the parameters to the joint pose was investigate. Results showed the stiffnesses and predicted motions were highly depended on both the joint pose. Following the first study, the method was reapplied to another dataset that included six complete lumbar spine segments under three different loading conditions. Specimen-specific uniform stiffnesses across joint levels and level-dependent stiffnesses were calculated by optimisation. Specimen-specific stiffness show high inter-specimen variability and were also specific to the loading condition. Level-dependent stiffnesses are necessary for accurate kinematic predictions and should be determined independently of one another. Secondly, a framework to create subject-specific musculoskeletal models of individuals with severe scoliosis was developed. This resulted in a robust codified pipeline for creating subject-specific, severely scoliotic spine models from CT data. In conclusion, this thesis showed that specimen-specific intervertebral joint stiffnesses were highly sensitive to joint pose definition and the importance of level-dependent optimisation. Further, an open-source codified pipeline to create patient-specific scoliotic spine models from CT data was released. These studies and this pipeline can facilitate the specimen-specific characterisation of the scoliotic intervertebral joint and its incorporation into scoliotic musculoskeletal spine models.