Analytical challenges in the fields of Nanobioscience and Nanobiotecnology: integrated methods for separation and characterization

Nano(bio)science and nano(bio)technology play a growing and tremendous interest both on academic and industrial aspects. They are undergoing rapid developments on many fronts such as genomics, proteomics, system biology, and medical applications. However, the lack of characterization tools for nano(bio)systems is currently considered as a major limiting factor to the final establishment of nano(bio)technologies. Flow Field-Flow Fractionation (FlFFF) is a separation technique that is definitely emerging in the bioanalytical field, and the number of applications on nano(bio)analytes such as high molar-mass proteins and protein complexes, sub-cellular units, viruses, and functionalized nanoparticles is constantly increasing. This can be ascribed to the intrinsic advantages of FlFFF for the separation of nano(bio)analytes. FlFFF is ideally suited to separate particles over a broad size range (1 nm-1 μm) according to their hydrodynamic radius (rh). The fractionation is carried out in an empty channel by a flow stream of a mobile phase of any composition. For these reasons, fractionation is developed without surface interaction of the analyte with packing or gel media, and there is no stationary phase able to induce mechanical or shear stress on nanosized analytes, which are for these reasons kept in their native state. Characterization of nano(bio)analytes is made possible after fractionation by interfacing the FlFFF system with detection techniques for morphological, optical or mass characterization. For instance, FlFFF coupling with multi-angle light scattering (MALS) detection allows for absolute molecular weight and size determination, and mass spectrometry has made FlFFF enter the field of proteomics. Potentialities of FlFFF couplings with multi-detection systems are discussed in the first section of this dissertation. The second and the third sections are dedicated to new methods that have been developed for the analysis and characterization of different samples of interest in the fields of diagnostics, pharmaceutics, and nanomedicine. The second section focuses on biological samples such as protein complexes and protein aggregates. In particular it focuses on FlFFF methods developed to give new insights into: a) chemical composition and morphological features of blood serum lipoprotein classes, b) time-dependent aggregation pattern of the amyloid protein Aβ1-42, and c) aggregation state of antibody therapeutics in their formulation buffers. The third section is dedicated to the analysis and characterization of structured nanoparticles designed for nanomedicine applications. The discussed results indicate that FlFFF with on-line MALS and fluorescence detection (FD) may become the unparallel methodology for the analysis and characterization of new, structured, fluorescent nanomaterials.

Arte e design in Italia dalla metà degli anni Sessanta alle ultime tendenze

Il lavoro di ricerca è rivolto ad indagare l’emersione di schemi di variazione comuni all’arte e al design, limitatamente al contesto italiano e in un arco di tempo che va dalla metà degli anni Sessanta del secolo scorso a oggi. L’analisi vuole rintracciare, mediante l’applicazione della metodologia fenomenologica, un sentire condiviso tra le due discipline e, nel pieno rispetto dei relativi linguaggi e con nessuna volontà di sudditanza degli uni rispetto agli altri, individuare i rapporti di corrispondenza omologica capaci di mettere in luce lo spirito del tempo che le ha generate. La ricerca si pone l’obiettivo di estendere gli studi sul contemporaneo attraverso un’impostazione che intende applicare gli strumenti metodologici della critica d’arte all’evoluzione stilistica delle tendenze del design italiano. Non si è voluto redigere una “storia” del design italiano ma, considerata anche l’ampiezza dell’argomento, si è necessariamente proceduto a delimitare il territorio di applicazione scegliendo di prendere in considerazione il solo settore del design dell’arredo. Si è dunque optato per una visione globale delle vicende del design del prodotto, tesa ad indagare gli snodi principali, concentrando pertanto l’analisi su alcuni protagonisti della cultura del progetto, ossia su quelle figure risultate dominanti nel proprio tempo perché capaci con il loro lavoro di dare un contribuito determinante alla comprensione delle fasi evolutive del design italiano. Gli strumenti utili a condurre l’analisi provengono principalmente dalla metodologia binaria individuata dallo storico dell’arte Heinrich Wölfflin e dagli studi di Renato Barilli, il cui impianto culturologico ha fornito un indispensabile contributo al processo di sistematizzazione dei meccanismi di variazione interni alle arti; sia quelli di tipo orizzontale, di convergenza reciproca con gli altri saperi, che di tipo verticale, in rapporto cioè con le scoperte scientifiche e tecnologiche della coeva cultura materiale.

Integration of cognitive and affective processes in perception and decision-making

The relationship between emotion and cognition is a topic that raises great interest in research. Recently, a view of these two processes as interactive and mutually influencing each other has become predominant. This dissertation investigates the reciprocal influences of emotion and cognition, both at behavioral and neural level, in two specific fields, such as attention and decision-making. Experimental evidence on how emotional responses may affect perceptual and attentional processes has been reported. In addition, the impact of three factors, such as personality traits, motivational needs and social context, in modulating the influence that emotion exerts on perception and attention has been investigated. Moreover, the influence of cognition on emotional responses in decision-making has been demonstrated. The current experimental evidence showed that cognitive brain regions such as the dorsolateral prefrontal cortex are causally implicated in regulation of emotional responses and that this has an effect at both pre and post decisional stages. There are two main conclusions of this dissertation: firstly, emotion exerts a strong influence on perceptual and attentional processes but, at the same time, this influence may also be modulated by other factors internal and external to the individuals. Secondly, cognitive processes may modulate emotional prepotent responses, by serving a regulative function critical to driving and shaping human behavior in line with current goals.

Integrated analysis and design of optimization and up-scaling of inductively coupled plasma synthesis of nanoparticles

This study is focused on radio-frequency inductively coupled thermal plasma (ICP) synthesis of nanoparticles, combining experimental and modelling approaches towards process optimization and industrial scale-up, in the framework of the FP7-NMP SIMBA European project (Scaling-up of ICP technology for continuous production of Metallic nanopowders for Battery Applications). First the state of the art of nanoparticle production through conventional and plasma routes is summarized, then results for the characterization of the plasma source and on the investigation of the nanoparticle synthesis phenomenon, aiming at highlighting fundamental process parameters while adopting a design oriented modelling approach, are presented. In particular, an energy balance of the torch and of the reaction chamber, employing a calorimetric method, is presented, while results for three- and two-dimensional modelling of an ICP system are compared with calorimetric and enthalpy probe measurements to validate the temperature field predicted by the model and used to characterize the ICP system under powder-free conditions. Moreover, results from the modeling of critical phases of ICP synthesis process, such as precursor evaporation, vapour conversion in nanoparticles and nanoparticle growth, are presented, with the aim of providing useful insights both for the design and optimization of the process and on the underlying physical phenomena. Indeed, precursor evaporation, one of the phases holding the highest impact on industrial feasibility of the process, is discussed; by employing models to describe particle trajectories and thermal histories, adapted from the ones originally developed for other plasma technologies or applications, such as DC non-transferred arc torches and powder spherodization, the evaporation of micro-sized Si solid precursor in a laboratory scale ICP system is investigated. Finally, a discussion on the role of thermo-fluid dynamic fields on nano-particle formation is presented, as well as a study on the effect of the reaction chamber geometry on produced nanoparticle characteristics and process yield.

Understanding the Combined Role of Internal and External Factors in New Service Development Process within the Professional Knowledge Intensive Business Service Firms

Our research asked the following main questions: how the characteristics of professionals service firms allow them to successfully innovate in exploiting through exploring by combining internal and external factors of innovation and how these ambidextrous organisations perceive these factors; and how do successful innovators in professional service firms use corporate entrepreneurship models in their new service development processes? With a goal to shed light on innovation in professional knowledge intensive business service firms’ (PKIBS), we concluded a qualitative analysis of ten globally acting law firms, providing business legal services. We analyse the internal and factors of innovation that are critical for PKIBS’ innovation. We suggest how these firms become ambidextrous in changing environment. Our findings show that this kind of firms has particular type of ambidexterity due to their specific characteristics. As PKIBS are very dependant on its human capital, governance structure, and the high expectations of their clients, their ambidexterity is structural, but also contextual at the same time. In addition, we suggest 3 types of corporate entrepreneurship models that international PKIBS use to enhance innovation in turbulent environments. We looked at how law firms going through turbulent environments were using corporate entrepreneurship activities as a part of their strategies to be more innovative. Using visual mapping methodology, we developed three types of innovation patterns in the law firms. We suggest that corporate entrepreneurship models depend on successful application of mainly three elements: who participates in corporate entrepreneurship initiatives; what are the formal processes that enhances these initiatives; and what are the policies applied to this type of behaviour.

Identification and genetic diversity in phytoplasmas associated with diseases of cassava and other agronomic relevant crops in south-east Asia and Latin America

Identification and genetic diversity of phytoplasmas infecting tropical plant species, selected among those most agronomically relevant in South-east Asia and Latin America were studied. Correlation between evolutionary divergence of relevant phytoplasma strains and their geographic distribution by comparison on homologous genes of phytoplasma strains detected in the same or related plant species in other geographical areas worldwide was achieved. Molecular diversity was studied on genes coding ribosomal proteins, groEL, tuf and amp besides phytoplasma 16S rRNA. Selected samples infected by phytoplasmas belonging to diverse ribosomal groups were also studied by in silico RFLP followed by phylogenetic analyses. Moreover a partial genome annotation of a ‘Ca. P. brasiliense’ strain was done towards future application for epidemiological studies. Phytoplasma presence in cassava showing frog skin (CFSD) and witches’ broom (CWB) diseases in Costa Rica - Paraguay and in Vietnam – Thailand, respectively, was evaluated. In both cases, the diseases were associated with phytoplasmas related to aster yellows, apple proliferation and “stolbur” groups, while only phytoplasma related to X-disease group in CFSD, and to hibiscus witches’ broom, elm yellows and clover proliferation groups in CWB. Variability was found among strains belonging to the same ribosomal group but having different geographic origin and associated with different disease. Additionally, a dodder transmission assay to elucidate the role of phytoplasmas in CWB disease was carried out, and resulted in typical phytoplasma symptoms in periwinkle plants associated with the presence of aster yellows-related strains. Lethal wilt disease, a severe disease of oil palm in Colombia that is spreading throughout South America was also studied. Phytoplasmas were detected in symptomatic oil palm and identified as ‘Ca. P. asteris’, ribosomal subgroup 16SrI-B, and were distinguished from other aster yellows phytoplasmas used as reference strains; in particular, from an aster yellows strain infecting corn in the same country.

The twofold role of Cloud Computing in Digital Forensics: target of investigations and helping hand to evidence analysis

This PhD thesis discusses the impact of Cloud Computing infrastructures on Digital Forensics in the twofold role of target of investigations and as a helping hand to investigators. The Cloud offers a cheap and almost limitless computing power and storage space for data which can be leveraged to commit either new or old crimes and host related traces. Conversely, the Cloud can help forensic examiners to find clues better and earlier than traditional analysis applications, thanks to its dramatically improved evidence processing capabilities. In both cases, a new arsenal of software tools needs to be made available. The development of this novel weaponry and its technical and legal implications from the point of view of repeatability of technical assessments is discussed throughout the following pages and constitutes the unprecedented contribution of this work