Evaluation of a multi variated analysis for the selection of t-tbar multijet events in the current CMS implemented environment at LHC

In the present study we are using multi variate analysis techniques to discriminate signal from background in the fully hadronic decay channel of ttbar events. We give a brief introduction to the role of the Top quark in the standard model and a general description of the CMS Experiment at LHC. We have used the CMS experiment computing and software infrastructure to generate and prepare the data samples used in this analysis. We tested the performance of three different classifiers applied to our data samples and used the selection obtained with the Multi Layer Perceptron classifier to give an estimation of the statistical and systematical uncertainty on the cross section measurement.

Tecnologie appropriate per la gestione delle georisorse nei paesi in via di sviluppo e nei paesi dell'America Latina. Creazione di una metodologia multi criteria per la valutazione dei progetti di sviluppo umano

Benessere delle popolazioni, gestione sostenibile delle risorse, povertà e degrado ambientale sono dei concetti fortemente connessi in un mondo in cui il 20% della popolazione mondiale consuma più del 75% delle risorse naturali. Sin dal 1992 al Summit della Terra a Rio de Janeiro si è affermato il forte legame tra tutela dell’ambiente e riduzione della povertà, ed è anche stata riconosciuta l’importanza di un ecosistema sano per condurre una vita dignitosa, specialmente nelle zone rurali povere dell’Africa, dell’Asia e dell’America Latina. La natura infatti, soprattutto per le popolazioni rurali, rappresenta un bene quotidiano e prezioso, una forma essenziale per la sussistenza ed una fonte primaria di reddito. Accanto a questa constatazione vi è anche la consapevolezza che negli ultimi decenni gli ecosistemi naturali si stanno degradando ad un ritmo impressionate, senza precedenti nella storia della specie umana: consumiamo le risorse più velocemente di quanto la Terra sia capace di rigenerarle e di “metabolizzare” i nostri scarti. Allo stesso modo aumenta la povertà: attualmente ci sono 1,2 miliardi di persone che vivono con meno di un dollaro al giorno, mentre circa metà della popolazione mondiale sopravvive con meno di due dollari al giorno (UN). La connessione tra povertà ed ambiente non dipende solamente dalla scarsità di risorse che rende più difficili le condizioni di vita, ma anche dalla gestione delle stesse risorse naturali. Infatti in molti paesi o luoghi dove le risorse non sono carenti la popolazione più povera non vi ha accesso per motivi politici, economici e sociali. Inoltre se si paragona l’impronta ecologica con una misura riconosciuta dello “sviluppo umano”, l’Indice dello Sviluppo Umano (HDI) delle Nazioni Unite (Cfr. Cap 2), il rapporto dimostra chiaramente che ciò che noi accettiamo generalmente come “alto sviluppo” è molto lontano dal concetto di sviluppo sostenibile accettato universalmente, in quanto i paesi cosiddetti “sviluppati” sono quelli con una maggior impronta ecologica. Se allora lo “sviluppo” mette sotto pressione gli ecosistemi, dal cui benessere dipende direttamente il benessere dell’uomo, allora vuol dire che il concetto di “sviluppo” deve essere rivisitato, perché ha come conseguenza non il benessere del pianeta e delle popolazioni, ma il degrado ambientale e l’accrescimento delle disuguaglianze sociali. Quindi da una parte vi è la “società occidentale”, che promuove l’avanzamento della tecnologia e dell’industrializzazione per la crescita economica, spremendo un ecosistema sempre più stanco ed esausto al fine di ottenere dei benefici solo per una ristretta fetta della popolazione mondiale che segue un modello di vita consumistico degradando l’ambiente e sommergendolo di rifiuti; dall’altra parte ci sono le famiglie di contadini rurali, i “moradores” delle favelas o delle periferie delle grandi metropoli del Sud del Mondo, i senza terra, gli immigrati delle baraccopoli, i “waste pickers” delle periferie di Bombay che sopravvivono raccattando rifiuti, i profughi di guerre fatte per il controllo delle risorse, gli sfollati ambientali, gli eco-rifugiati, che vivono sotto la soglia di povertà, senza accesso alle risorse primarie per la sopravvivenza. La gestione sostenibile dell’ambiente, il produrre reddito dalla valorizzazione diretta dell’ecosistema e l’accesso alle risorse naturali sono tra gli strumenti più efficaci per migliorare le condizioni di vita degli individui, strumenti che possono anche garantire la distribuzione della ricchezza costruendo una società più equa, in quanto le merci ed i servizi dell’ecosistema fungono da beni per le comunità. La corretta gestione dell’ambiente e delle risorse quindi è di estrema importanza per la lotta alla povertà ed in questo caso il ruolo e la responsabilità dei tecnici ambientali è cruciale. Il lavoro di ricerca qui presentato, partendo dall’analisi del problema della gestione delle risorse naturali e dal suo stretto legame con la povertà, rivisitando il concetto tradizionale di “sviluppo” secondo i nuovi filoni di pensiero, vuole suggerire soluzioni e tecnologie per la gestione sostenibile delle risorse naturali che abbiano come obiettivo il benessere delle popolazioni più povere e degli ecosistemi, proponendo inoltre un metodo valutativo per la scelta delle alternative, soluzioni o tecnologie più adeguate al contesto di intervento. Dopo l’analisi dello “stato del Pianeta” (Capitolo 1) e delle risorse, sia a livello globale che a livello regionale, il secondo Capitolo prende in esame il concetto di povertà, di Paese in Via di Sviluppo (PVS), il concetto di “sviluppo sostenibile” e i nuovi filoni di pensiero: dalla teoria della Decrescita, al concetto di Sviluppo Umano. Dalla presa di coscienza dei reali fabbisogni umani, dall’analisi dello stato dell’ambiente, della povertà e delle sue diverse facce nei vari paesi, e dalla presa di coscienza del fallimento dell’economia della crescita (oggi visibile più che mai) si può comprendere che la soluzione per sconfiggere la povertà, il degrado dell’ambiente, e raggiungere lo sviluppo umano, non è il consumismo, la produzione, e nemmeno il trasferimento della tecnologia e l’industrializzazione; ma il “piccolo e bello” (F. Schumacher, 1982), ovvero gli stili di vita semplici, la tutela degli ecosistemi, e a livello tecnologico le “tecnologie appropriate”. Ed è proprio alle Tecnologie Appropriate a cui sono dedicati i Capitoli successivi (Capitolo 4 e Capitolo 5). Queste sono tecnologie semplici, a basso impatto ambientale, a basso costo, facilmente gestibili dalle comunità, tecnologie che permettono alle popolazioni più povere di avere accesso alle risorse naturali. Sono le tecnologie che meglio permettono, grazie alle loro caratteristiche, la tutela dei beni comuni naturali, quindi delle risorse e dell’ambiente, favorendo ed incentivando la partecipazione delle comunità locali e valorizzando i saperi tradizionali, grazie al coinvolgimento di tutti gli attori, al basso costo, alla sostenibilità ambientale, contribuendo all’affermazione dei diritti umani e alla salvaguardia dell’ambiente. Le Tecnologie Appropriate prese in esame sono quelle relative all’approvvigionamento idrico e alla depurazione dell’acqua tra cui: - la raccolta della nebbia, - metodi semplici per la perforazione di pozzi, - pompe a pedali e pompe manuali per l’approvvigionamento idrico, - la raccolta dell’acqua piovana, - il recupero delle sorgenti, - semplici metodi per la depurazione dell’acqua al punto d’uso (filtro in ceramica, filtro a sabbia, filtro in tessuto, disinfezione e distillazione solare). Il quinto Capitolo espone invece le Tecnolocie Appropriate per la gestione dei rifiuti nei PVS, in cui sono descritte: - soluzioni per la raccolta dei rifiuti nei PVS, - soluzioni per lo smaltimento dei rifiuti nei PVS, - semplici tecnologie per il riciclaggio dei rifiuti solidi. Il sesto Capitolo tratta tematiche riguardanti la Cooperazione Internazionale, la Cooperazione Decentrata e i progetti di Sviluppo Umano. Per progetti di sviluppo si intende, nell’ambito della Cooperazione, quei progetti che hanno come obiettivi la lotta alla povertà e il miglioramento delle condizioni di vita delle comunità beneficiarie dei PVS coinvolte nel progetto. All’interno dei progetti di cooperazione e di sviluppo umano gli interventi di tipo ambientale giocano un ruolo importante, visto che, come già detto, la povertà e il benessere delle popolazioni dipende dal benessere degli ecosistemi in cui vivono: favorire la tutela dell’ambiente, garantire l’accesso all’acqua potabile, la corretta gestione dei rifiuti e dei reflui nonché l’approvvigionamento energetico pulito sono aspetti necessari per permettere ad ogni individuo, soprattutto se vive in condizioni di “sviluppo”, di condurre una vita sana e produttiva. È importante quindi, negli interventi di sviluppo umano di carattere tecnico ed ambientale, scegliere soluzioni decentrate che prevedano l’adozione di Tecnologie Appropriate per contribuire a valorizzare l’ambiente e a tutelare la salute della comunità. I Capitoli 7 ed 8 prendono in esame i metodi per la valutazione degli interventi di sviluppo umano. Un altro aspetto fondamentale che rientra nel ruolo dei tecnici infatti è l’utilizzo di un corretto metodo valutativo per la scelta dei progetti possibili che tenga presente tutti gli aspetti, ovvero gli impatti sociali, ambientali, economici e che si cali bene alle realtà svantaggiate come quelle prese in considerazione in questo lavoro; un metodo cioè che consenta una valutazione specifica per i progetti di sviluppo umano e che possa permettere l’individuazione del progetto/intervento tecnologico e ambientale più appropriato ad ogni contesto specifico. Dall’analisi dei vari strumenti valutativi si è scelto di sviluppare un modello per la valutazione degli interventi di carattere ambientale nei progetti di Cooperazione Decentrata basato sull’Analisi Multi Criteria e sulla Analisi Gerarchica. L’oggetto di questa ricerca è stato quindi lo sviluppo di una metodologia, che tramite il supporto matematico e metodologico dell’Analisi Multi Criteria, permetta di valutare l’appropriatezza, la sostenibilità degli interventi di Sviluppo Umano di carattere ambientale, sviluppati all’interno di progetti di Cooperazione Internazionale e di Cooperazione Decentrata attraverso l’utilizzo di Tecnologie Appropriate. Nel Capitolo 9 viene proposta la metodologia, il modello di calcolo e i criteri su cui si basa la valutazione. I successivi capitoli (Capitolo 10 e Capitolo 11) sono invece dedicati alla sperimentazione della metodologia ai diversi casi studio: - “Progetto ambientale sulla gestione dei rifiuti presso i campi Profughi Saharawi”, Algeria, - “Programa 1 milhão de Cisternas, P1MC” e - “Programa Uma Terra e Duas Águas, P1+2”, Semi Arido brasiliano.

Techniques and Methods for a multi-scale analysis of neuromuscular fatigue

This thesis proposes an integrated holistic approach to the study of neuromuscular fatigue in order to encompass all the causes and all the consequences underlying the phenomenon. Starting from the metabolic processes occurring at the cellular level, the reader is guided toward the physiological changes at the motorneuron and motor unit level and from this to the more general biomechanical alterations. In Chapter 1 a list of the various definitions for fatigue spanning several contexts has been reported. In Chapter 2, the electrophysiological changes in terms of motor unit behavior and descending neural drive to the muscle have been studied extensively as well as the biomechanical adaptations induced. In Chapter 3 a study based on the observation of temporal features extracted from sEMG signals has been reported leading to the need of a more robust and reliable indicator during fatiguing tasks. Therefore, in Chapter 4, a novel bi-dimensional parameter is proposed. The study on sEMG-based indicators opened a scenario also on neurophysiological mechanisms underlying fatigue. For this purpose, in Chapter 5, a protocol designed for the analysis of motor unit-related parameters during prolonged fatiguing contractions is presented. In particular, two methodologies have been applied to multichannel sEMG recordings of isometric contractions of the Tibialis Anterior muscle: the state-of-the-art technique for sEMG decomposition and a coherence analysis on MU spike trains. The importance of a multi-scale approach has been finally highlighted in the context of the evaluation of cycling performance, where fatigue is one of the limiting factors. In particular, the last chapter of this thesis can be considered as a paradigm: physiological, metabolic, environmental, psychological and biomechanical factors influence the performance of a cyclist and only when all of these are kept together in a novel integrative way it is possible to derive a clear model and make correct assessments.

Un modello multicriteriale di supporto alla pianificazione territoriale finalizzato alla classificazione del territorio rurale e alla caratterizzazione dell’Impronta Agro ambientale delle aree agricole periurbane.

La ricerca proposta si pone l’obiettivo di definire e sperimentare un metodo per un’articolata e sistematica lettura del territorio rurale, che, oltre ad ampliare la conoscenza del territorio, sia di supporto ai processi di pianificazione paesaggistici ed urbanistici e all’attuazione delle politiche agricole e di sviluppo rurale. Un’approfondita disamina dello stato dell’arte riguardante l’evoluzione del processo di urbanizzazione e le conseguenze dello stesso in Italia e in Europa, oltre che del quadro delle politiche territoriali locali nell’ambito del tema specifico dello spazio rurale e periurbano, hanno reso possibile, insieme a una dettagliata analisi delle principali metodologie di analisi territoriale presenti in letteratura, la determinazione del concept alla base della ricerca condotta. E’ stata sviluppata e testata una metodologia multicriteriale e multilivello per la lettura del territorio rurale sviluppata in ambiente GIS, che si avvale di algoritmi di clustering (quale l’algoritmo IsoCluster) e classificazione a massima verosimiglianza, focalizzando l’attenzione sugli spazi agricoli periurbani. Tale metodo si incentra sulla descrizione del territorio attraverso la lettura di diverse componenti dello stesso, quali quelle agro-ambientali e socio-economiche, ed opera una sintesi avvalendosi di una chiave interpretativa messa a punto allo scopo, l’Impronta Agroambientale (Agro-environmental Footprint - AEF), che si propone di quantificare il potenziale impatto degli spazi rurali sul sistema urbano. In particolare obiettivo di tale strumento è l’identificazione nel territorio extra-urbano di ambiti omogenei per caratteristiche attraverso una lettura del territorio a differenti scale (da quella territoriale a quella aziendale) al fine di giungere ad una sua classificazione e quindi alla definizione delle aree classificabili come “agricole periurbane”. La tesi propone la presentazione dell’architettura complessiva della metodologia e la descrizione dei livelli di analisi che la compongono oltre che la successiva sperimentazione e validazione della stessa attraverso un caso studio rappresentativo posto nella Pianura Padana (Italia).

Natural patterns and anthropogenic disturbance in north Adriatic marine benthic assemblages: descriptive and methodological studies

Marine soft bottom systems show a high variability across multiple spatial and temporal scales. Both natural and anthropogenic sources of disturbance act together in affecting benthic sedimentary characteristics and species distribution. The description of such spatial variability is required to understand the ecological processes behind them. However, in order to have a better estimate of spatial patterns, methods that take into account the complexity of the sedimentary system are required. This PhD thesis aims to give a significant contribution both in improving the methodological approaches to the study of biological variability in soft bottom habitats and in increasing the knowledge of the effect that different process (both natural and anthropogenic) could have on the benthic communities of a large area in the North Adriatic Sea. Beta diversity is a measure of the variability in species composition, and Whittaker’s index has become the most widely used measure of beta-diversity. However, application of the Whittaker index to soft bottom assemblages of the Adriatic Sea highlighted its sensitivity to rare species (species recorded in a single sample). This over-weighting of rare species induces biased estimates of the heterogeneity, thus it becomes difficult to compare assemblages containing a high proportion of rare species. In benthic communities, the unusual large number of rare species is frequently attributed to a combination of sampling errors and insufficient sampling effort. In order to reduce the influence of rare species on the measure of beta diversity, I have developed an alternative index based on simple probabilistic considerations. It turns out that this probability index is an ordinary Michaelis-Menten transformation of Whittaker's index but behaves more favourably when species heterogeneity increases. The suggested index therefore seems appropriate when comparing patterns of complexity in marine benthic assemblages. Although the new index makes an important contribution to the study of biodiversity in sedimentary environment, it remains to be seen which processes, and at what scales, influence benthic patterns. The ability to predict the effects of ecological phenomena on benthic fauna highly depends on both spatial and temporal scales of variation. Once defined, implicitly or explicitly, these scales influence the questions asked, the methodological approaches and the interpretation of results. Problem often arise when representative samples are not taken and results are over-generalized, as can happen when results from small-scale experiments are used for resource planning and management. Such issues, although globally recognized, are far from been resolved in the North Adriatic Sea. This area is potentially affected by both natural (e.g. river inflow, eutrophication) and anthropogenic (e.g. gas extraction, fish-trawling) sources of disturbance. Although few studies in this area aimed at understanding which of these processes mainly affect macrobenthos, these have been conducted at a small spatial scale, as they were designated to examine local changes in benthic communities or particular species. However, in order to better describe all the putative processes occurring in the entire area, a high sampling effort performed at a large spatial scale is required. The sedimentary environment of the western part of the Adriatic Sea was extensively studied in this thesis. I have described, in detail, spatial patterns both in terms of sedimentary characteristics and macrobenthic organisms and have suggested putative processes (natural or of human origin) that might affect the benthic environment of the entire area. In particular I have examined the effect of off shore gas platforms on benthic diversity and tested their effect over a background of natural spatial variability. The results obtained suggest that natural processes in the North Adriatic such as river outflow and euthrophication show an inter-annual variability that might have important consequences on benthic assemblages, affecting for example their spatial pattern moving away from the coast and along a North to South gradient. Depth-related factors, such as food supply, light, temperature and salinity play an important role in explaining large scale benthic spatial variability (i.e., affecting both the abundance patterns and beta diversity). Nonetheless, more locally, effects probably related to an organic enrichment or pollution from Po river input has been observed. All these processes, together with few human-induced sources of variability (e.g. fishing disturbance), have a higher effect on macrofauna distribution than any effect related to the presence of gas platforms. The main effect of gas platforms is restricted mainly to small spatial scales and related to a change in habitat complexity due to a natural dislodgement or structure cleaning of mussels that colonize their legs. The accumulation of mussels on the sediment reasonably affects benthic infauna composition. All the components of the study presented in this thesis highlight the need to carefully consider methodological aspects related to the study of sedimentary habitats. With particular regards to the North Adriatic Sea, a multi-scale analysis along natural and anthopogenic gradients was useful for detecting the influence of all the processes affecting the sedimentary environment. In the future, applying a similar approach may lead to an unambiguous assessment of the state of the benthic community in the North Adriatic Sea. Such assessment may be useful in understanding if any anthropogenic source of disturbance has a negative effect on the marine environment, and if so, planning sustainable strategies for a proper management of the affected area.

The use of Ground Penetrating Radar and alternative geophysical techniques for assessing embankments and dykes safety

The research is part of a survey for the detection of the hydraulic and geotechnical conditions of river embankments funded by the Reno River Basin Regional Technical Service of the Region Emilia-Romagna. The hydraulic safety of the Reno River, one of the main rivers in North-Eastern Italy, is indeed of primary importance to the Emilia-Romagna regional administration. The large longitudinal extent of the banks (several hundreds of kilometres) has placed great interest in non-destructive geophysical methods, which, compared to other methods such as drilling, allow for the faster and often less expensive acquisition of high-resolution data. The present work aims to experience the Ground Penetrating Radar (GPR) for the detection of local non-homogeneities (mainly stratigraphic contacts, cavities and conduits) inside the Reno River and its tributaries embankments, taking into account supplementary data collected with traditional destructive tests (boreholes, cone penetration tests etc.). A comparison with non-destructive methodologies likewise electric resistivity tomography (ERT), Multi-channels Analysis of Surface Waves (MASW), FDEM induction, was also carried out in order to verify the usability of GPR and to provide integration of various geophysical methods in the process of regular maintenance and check of the embankments condition. The first part of this thesis is dedicated to the explanation of the state of art concerning the geographic, geomorphologic and geotechnical characteristics of Reno River and its tributaries embankments, as well as the description of some geophysical applications provided on embankments belonging to European and North-American Rivers, which were used as bibliographic basis for this thesis realisation. The second part is an overview of the geophysical methods that were employed for this research, (with a particular attention to the GPR), reporting also their theoretical basis and a deepening of some techniques of the geophysical data analysis and representation, when applied to river embankments. The successive chapters, following the main scope of this research that is to highlight advantages and drawbacks in the use of Ground Penetrating Radar applied to Reno River and its tributaries embankments, show the results obtained analyzing different cases that could yield the formation of weakness zones, which successively lead to the embankment failure. As advantages, a considerable velocity of acquisition and a spatial resolution of the obtained data, incomparable with respect to other methodologies, were recorded. With regard to the drawbacks, some factors, related to the attenuation losses of wave propagation, due to different content in clay, silt, and sand, as well as surface effects have significantly limited the correlation between GPR profiles and geotechnical information and therefore compromised the embankment safety assessment. Recapitulating, the Ground Penetrating Radar could represent a suitable tool for checking up river dike conditions, but its use has significantly limited by geometric and geotechnical characteristics of the Reno River and its tributaries levees. As a matter of facts, only the shallower part of the embankment was investigate, achieving also information just related to changes in electrical properties, without any numerical measurement. Furthermore, GPR application is ineffective for a preliminary assessment of embankment safety conditions, while for detailed campaigns at shallow depth, which aims to achieve immediate results with optimal precision, its usage is totally recommended. The cases where multidisciplinary approach was tested, reveal an optimal interconnection of the various geophysical methodologies employed, producing qualitative results concerning the preliminary phase (FDEM), assuring quantitative and high confidential description of the subsoil (ERT) and finally, providing fast and highly detailed analysis (GPR). Trying to furnish some recommendations for future researches, the simultaneous exploitation of many geophysical devices to assess safety conditions of river embankments is absolutely suggested, especially to face reliable flood event, when the entire extension of the embankments themselves must be investigated.

I beni relazionali nella ricerca sociologica: che cosa sono e quali effetti producono

This paper studies relational goods as immaterial assets creating real effects in society. The work starts answering to this question: what kind of effects do relational goods produce? After an accurate literature examination we suppose relational goods are social relations of second order. In the hypotesis they come from the emergence of two distinct social relations: interpersonal and reflexive relations. We describe empirical evidences of these emergent assets in social life and we test the effects they produce with a model. In the work we focus on four targets. First of all we describe the emergence of relational goods through a mathematical model. Then we individualize social realities where relational goods show evident effects and we outline our scientific hypotesis. The following step consists in the formulation of empirical tests. At last we explain final results. Our aim is to set apart the constitutive structure of relational goods into a checkable model coherently with the empirical evidences shown in the research. In the study we use multi-variate analysis techniques to see relational goods in a new way and we use qualitative and quantitative strategies. Relational goods are analysed both as dependent and independent variable in order to consider causative factors acting in a black-box model. Moreover we analyse effects of relational goods inside social spheres, especially in third sector and capitalistic economy. Finally we attain to effective indexes of relational goods in order to compare them with some performance indexes.

Caratterizzazione meccanica multiscala di materiali rocciosi strutturalmente complessi

The research work was aimed at studying, with a deterministic approach, the relationships between the rock’s texture and its mechanical properties determined at the laboratory scale. The experimentation was performed on a monomineralic crystalline rock, varying in texture, i.e. grains shape. Multi-scale analysis has been adopted to determine the elasto-mechanical properties of the crystals composing the rock and its strength and deformability at the macro-scale. This let us to understand how the structural variability of the investigated rock affects its macromechanical behaviour. Investigations have been performed on three different scales: nano-scale (order of nm), micro-scale (tens of m) and macro-scale (cm). Innovative techniques for rock mechanics, i.e. Depth Sensing Indentation (DSI), have been applied, in order to determine the elasto-mechanical properties of the calcite grains. These techniques have also allowed to study the influence of grain boundaries on the mechanical response of calcite grains by varying the indents’ sizes and to quantify the effect of the applied load on the hardness and elastic modulus of the grain (indentation size effect, ISE). The secondary effects of static indentation Berkovich, Vickers and Knoop were analyzed by SEM, and some considerations on the rock’s brittle behaviour and the effect of microcracks can be made.

Characterization of fold-related fractures in the carbonate rocks of the Cingoli anticline, northern Apennines, Italy

Thrust fault-related folds in carbonate rocks are characterized by deformation accommodated by different structures, such as joints, faults, pressure solution seams, and deformation bands. Defining the development of fracture systems related to the folding process is significant both for theoretical and practical purposes. Fracture systems are useful constrains in order to understand the kinematical evolution of the fold. Furthermore, understanding the relationships between folding and fracturing provides a noteworthy contribution for reconstructing the geodynamic and the structural evolution of the studied area. Moreover, as fold-related fractures influence fluid flow through rocks, fracture systems are relevant for energy production (geothermal studies, methane and CO2 , storage and hydrocarbon exploration), environmental and social issues (pollutant distribution, aquifer characterization). The PhD project shows results of a study carried out in a multilayer carbonate anticline characterized by different mechanical properties. The aim of this study is to understand the factors which influence the fracture formation and to define their temporal sequence during the folding process. The studied are is located in the Cingoli anticline (Northern Apennines), which is characterized by a pelagic multilayer characterized by sequences with different mechanical stratigraphies. A multi-scale analysis has been made in several outcrops located in different structural positions. This project shows that the conceptual sketches proposed in literature and the strain distribution models outline well the geometrical orientation of most of the set of fractures observed in the Cingoli anticline. On the other hand, the present work suggests the relevance of the mechanical stratigraphy in particular controlling the type of fractures formed (e.g. pressure solution seams, joints or shear fractures) and their subsequent evolution. Through a multi-scale analysis, and on the basis of the temporal relationship between fracture sets and their orientation respect layering, I also suggest a conceptual model for fracture systems formation.

Development Of New Toolkits For Orbit Determination Codes For Precise Radio Tracking Experiments

This thesis describes the developments of new models and toolkits for the orbit determination codes to support and improve the precise radio tracking experiments of the Cassini-Huygens mission, an interplanetary mission to study the Saturn system. The core of the orbit determination process is the comparison between observed observables and computed observables. Disturbances in either the observed or computed observables degrades the orbit determination process. Chapter 2 describes a detailed study of the numerical errors in the Doppler observables computed by NASA's ODP and MONTE, and ESA's AMFIN. A mathematical model of the numerical noise was developed and successfully validated analyzing against the Doppler observables computed by the ODP and MONTE, with typical relative errors smaller than 10%. The numerical noise proved to be, in general, an important source of noise in the orbit determination process and, in some conditions, it may becomes the dominant noise source. Three different approaches to reduce the numerical noise were proposed. Chapter 3 describes the development of the multiarc library, which allows to perform a multi-arc orbit determination with MONTE. The library was developed during the analysis of the Cassini radio science gravity experiments of the Saturn's satellite Rhea. Chapter 4 presents the estimation of the Rhea's gravity field obtained from a joint multi-arc analysis of Cassini R1 and R4 fly-bys, describing in details the spacecraft dynamical model used, the data selection and calibration procedure, and the analysis method followed. In particular, the approach of estimating the full unconstrained quadrupole gravity field was followed, obtaining a solution statistically not compatible with the condition of hydrostatic equilibrium. The solution proved to be stable and reliable. The normalized moment of inertia is in the range 0.37-0.4 indicating that Rhea's may be almost homogeneous, or at least characterized by a small degree of differentiation.

A Web GIS Decision Support System For Coastal Risk Assessment and Mitigation Planning

Coastal flooding poses serious threats to coastal areas around the world, billions of dollars in damage to property and infrastructure, and threatens the lives of millions of people. Therefore, disaster management and risk assessment aims at detecting vulnerability and capacities in order to reduce coastal flood disaster risk. In particular, non-specialized researchers, emergency management personnel, and land use planners require an accurate, inexpensive method to determine and map risk associated with storm surge events and long-term sea level rise associated with climate change. This study contributes to the spatially evaluation and mapping of social-economic-environmental vulnerability and risk at sub-national scale through the development of appropriate tools and methods successfully embedded in a Web-GIS Decision Support System. A new set of raster-based models were studied and developed in order to be easily implemented in the Web-GIS framework with the purpose to quickly assess and map flood hazards characteristics, damage and vulnerability in a Multi-criteria approach. The Web-GIS DSS is developed recurring to open source software and programming language and its main peculiarity is to be available and usable by coastal managers and land use planners without requiring high scientific background in hydraulic engineering. The effectiveness of the system in the coastal risk assessment is evaluated trough its application to a real case study.

Procedures of quality control and data analysis of multi-site ground-based observations for the absolute flux calibration of Gaia

The Gaia space mission is a major project for the European astronomical community. As challenging as it is, the processing and analysis of the huge data-flow incoming from Gaia is the subject of thorough study and preparatory work by the DPAC (Data Processing and Analysis Consortium), in charge of all aspects of the Gaia data reduction. This PhD Thesis was carried out in the framework of the DPAC, within the team based in Bologna. The task of the Bologna team is to define the calibration model and to build a grid of spectro-photometric standard stars (SPSS) suitable for the absolute flux calibration of the Gaia G-band photometry and the BP/RP spectrophotometry. Such a flux calibration can be performed by repeatedly observing each SPSS during the life-time of the Gaia mission and by comparing the observed Gaia spectra to the spectra obtained by our ground-based observations. Due to both the different observing sites involved and the huge amount of frames expected (≃100000), it is essential to maintain the maximum homogeneity in data quality, acquisition and treatment, and a particular care has to be used to test the capabilities of each telescope/instrument combination (through the “instrument familiarization plan”), to devise methods to keep under control, and eventually to correct for, the typical instrumental effects that can affect the high precision required for the Gaia SPSS grid (a few % with respect to Vega). I contributed to the ground-based survey of Gaia SPSS in many respects: with the observations, the instrument familiarization plan, the data reduction and analysis activities (both photometry and spectroscopy), and to the maintenance of the data archives. However, the field I was personally responsible for was photometry and in particular relative photometry for the production of short-term light curves. In this context I defined and tested a semi-automated pipeline which allows for the pre-reduction of imaging SPSS data and the production of aperture photometry catalogues ready to be used for further analysis. A series of semi-automated quality control criteria are included in the pipeline at various levels, from pre-reduction, to aperture photometry, to light curves production and analysis.

EXAM-S: an Analysis tool for Multi-Domain Policy Sets

As distributed collaborative applications and architectures are adopting policy based management for tasks such as access control, network security and data privacy, the management and consolidation of a large number of policies is becoming a crucial component of such policy based systems. In large-scale distributed collaborative applications like web services, there is the need of analyzing policy interactions and integrating policies. In this thesis, we propose and implement EXAM-S, a comprehensive environment for policy analysis and management, which can be used to perform a variety of functions such as policy property analyses, policy similarity analysis, policy integration etc. As part of this environment, we have proposed and implemented new techniques for the analysis of policies that rely on a deep study of state of the art techniques. Moreover, we propose an approach for solving heterogeneity problems that usually arise when considering the analysis of policies belonging to different domains. Our work focuses on analysis of access control policies written in the dialect of XACML (Extensible Access Control Markup Language). We consider XACML policies because XACML is a rich language which can represent many policies of interest to real world applications and is gaining widespread adoption in the industry.

Slope stability analysis by multi-temporal DEMs and 3D modelling: The 2002 and 2007 Stromboli landslide events

Natural hazard related to the volcanic activity represents a potential risk factor, particularly in the vicinity of human settlements. Besides to the risk related to the explosive and effusive activity, the instability of volcanic edifices may develop into large landslides often catastrophically destructive, as shown by the collapse of the northern flank of Mount St. Helens in 1980. A combined approach was applied to analyse slope failures that occurred at Stromboli volcano. SdF slope stability was evaluated by using high-resolution multi-temporal DTMMs and performing limit equilibrium stability analyses. High-resolution topographical data collected with remote sensing techniques and three-dimensional slope stability analysis play a key role in understanding instability mechanism and the related risks. Analyses carried out on the 2002–2003 and 2007 Stromboli eruptions, starting from high-resolution data acquired through airborne remote sensing surveys, permitted the estimation of the lava volumes emplaced on the SdF slope and contributed to the investigation of the link between magma emission and slope instabilities. Limit Equilibrium analyses were performed on the 2001 and 2007 3D models, in order to simulate the slope behavior before 2002-2003 landslide event and after the 2007 eruption. Stability analyses were conducted to understand the mechanisms that controlled the slope deformations which occurred shortly after the 2007 eruption onset, involving the upper part of slope. Limit equilibrium analyses applied to both cases yielded results which are congruent with observations and monitoring data. The results presented in this work undoubtedly indicate that hazard assessment for the island of Stromboli should take into account the fact that a new magma intrusion could lead to further destabilisation of the slope, which may be more significant than the one recently observed because it will affect an already disarranged deposit and fractured and loosened crater area. The two-pronged approach based on the analysis of 3D multi-temporal mapping datasets and on the application of LE methods contributed to better understanding volcano flank behaviour and to be prepared to undertake actions aimed at risk mitigation.