Measurement of top quark pairs production cross-section in the semi-leptonic channel with the ATLAS experiment

This thesis is about three major aspects of the identification of top quarks. First comes the understanding of their production mechanism, their decay channels and how to translate theoretical formulae into programs that can simulate such physical processes using Monte Carlo techniques. In particular, the author has been involved in the introduction of the POWHEG generator in the framework of the ATLAS experiment. POWHEG is now fully used as the benchmark program for the simulation of ttbar pairs production and decay, along with MC@NLO and AcerMC: this will be shown in chapter one. The second chapter illustrates the ATLAS detectors and its sub-units, such as calorimeters and muon chambers. It is very important to evaluate their efficiency in order to fully understand what happens during the passage of radiation through the detector and to use this knowledge in the calculation of final quantities such as the ttbar production cross section. The last part of this thesis concerns the evaluation of this quantity deploying the so-called "golden channel" of ttbar decays, yielding one energetic charged lepton, four particle jets and a relevant quantity of missing transverse energy due to the neutrino. The most important systematic errors arising from the various part of the calculation are studied in detail. Jet energy scale, trigger efficiency, Monte Carlo models, reconstruction algorithms and luminosity measurement are examples of what can contribute to the uncertainty about the cross-section.

Agrofood chain analysis: production, commercialisation and consumption of healthy food for population at risk of poverty in Italy

Italy registers a fast increase of low income population. Academics and policy makers consider income inequalities as a key determinant for low or inadequate healthy food consumption. Thus the objective is to understand how to overcome the agrofood chain barriers towards healthy food production, commercialisation and consumption for population at risk of poverty (ROP) in Italy. The study adopts a market oriented food chain approach, focusing the research ambit on ROP consumers, processing industries and retailers. The empirical investigation adopts a qualitative methodology with an explorative approach. The actors are investigated through 4 focus groups for consumers and carrying out 27 face to face semi-structured interviews for industries and retailers’ representatives. The results achieved provide the perceptions of each actor integrated into an overall chain approach. The analysis shows that all agrofood actors lack of an adequate level of knowledge towards healthy food definition. Food industries and retailers also show poor awareness about ROP consumers’ segment. In addition they perceive that the high costs for producing healthy food conflict with the low economic performances expected from ROP consumers’ segment. These aspects induce a scarce interest in investing on commercialisation strategies for healthy food for ROP consumers. Further ROP consumers show other notable barriers to adopt healthy diets caused, among others, by a personal strong negative attitude and lack of motivation. The personal barriers are also negatively influenced by several external socio-economic factors. The solutions to overcome the barriers shall rely on the improvement of the agrofood chain internal relations to identify successful strategies for increasing interest on low cost healthy food. In particular the focus should be on improved collaboration on innovation adoption and marketing strategies, considering ROP consumers’ preferences and needs. An external political intervention is instead necessary to fill the knowledge and regulations’ gaps on healthy food issues.

Safety by design: production of engineering surface modified nanomaterials

This PhD thesis focused on nanomaterial (NM) engineering for occupational health and safety, in the frame of the EU project “Safe Nano Worker Exposure Scenarios (SANOWORK)”. Following a safety by design approach, surface engineering (surface coating, purification process, colloidal force control, wet milling, film coating deposition and granulation) were proposed as risk remediation strategies (RRS) to decrease toxicity and emission potential of NMs within real processing lines. In the first case investigated, the PlasmaChem ZrO2 manufacturing, the colloidal force control applied to the washing of synthesis rector, allowed to reduce ZrO2 contamination in wastewater, performing an efficient recycling procedure of ZrO2 recovered. Furthermore, ZrO2 NM was investigated in the ceramic process owned by CNR-ISTEC and GEA-Niro; the spray drying and freeze drying techniques were employed decreasing NM emissivity, but maintaining a reactive surface in dried NM. Considering the handling operation of nanofibers (NFs) obtained through Elmarco electrospinning procedure, the film coating deposition was applied on polyamide non-woven to avoid free fiber release. For TiO2 NF the wet milling was applied to reduce and homogenize the aspect ratio, leading to a significant mitigation of fiber toxicity. In the Colorobbia spray coating line, Ag and TiO2 nanosols, employed to transfer respectively antibacterial or depolluting properties to different substrates, were investigated. Ag was subjected to surface coating and purification, decreasing NM toxicity. TiO2 was modified by surface coating, spray drying and blending with colloidal SiO2, improving its technological performance. In the extrusion of polymeric matrix charged with carbon nanotube (CNTs) owned by Leitat, the CNTs used as filler were granulated by spray drying and freeze spray drying techniques, allowing to reduce their exposure potential. Engineered NMs tested by biologists were further investigated in relevant biological conditions, to improve the knowledge of structure/toxicity mechanisms and obtain new insights for the design of safest NMs.