Security enhancements and flaws of emerging communication technologies

The multi-faced evolution of network technologies ranges from big data centers to specialized network infrastructures and protocols for mission-critical operations. For instance, technologies such as Software Defined Networking (SDN) revolutionized the world of static configuration of the network - i.e., by removing the distributed and proprietary configuration of the switched networks - centralizing the control plane. While this disruptive approach is interesting from different points of view, it can introduce new unforeseen vulnerabilities classes. One topic of particular interest in the last years is industrial network security, an interest which started to rise in 2016 with the introduction of the Industry 4.0 (I4.0) movement. Networks that were basically isolated by design are now connected to the internet to collect, archive, and analyze data. While this approach got a lot of momentum due to the predictive maintenance capabilities, these network technologies can be exploited in various ways from a cybersecurity perspective. Some of these technologies lack security measures and can introduce new families of vulnerabilities. On the other side, these networks can be used to enable accurate monitoring, formal verification, or defenses that were not practical before. This thesis explores these two fields: by introducing monitoring, protections, and detection mechanisms where the new network technologies make it feasible; and by demonstrating attacks on practical scenarios related to emerging network infrastructures not protected sufficiently. The goal of this thesis is to highlight this lack of protection in terms of attacks on and possible defenses enabled by emerging technologies. We will pursue this goal by analyzing the aforementioned technologies and by presenting three years of contribution to this field. In conclusion, we will recapitulate the research questions and give answers to them.

Il sindacato della Corte di cassazione sul travisamento della prova

Sect. 606, par. 1, e), as modified by Law 46, enacted on Februray 20th, 2006 introduced the chance to appeal to the Court of cassation in case of inconsistent reasoning and extended control on its existence and on other flaws and lack of obvious logic over the text of the contested decision, namely “to other acts the process specified in the grounds of burden”. The renewed provision seems to properly reappoint the “distortion of the evidence”, i.e. the omitted or distorted evidence that could be relevant and conclusive one, in the peculiar context of the grounds' vice. After a general review of the obligation to state reasons for judicial decisions, we analyze the innovative status of the vice of “distortion of evidence” and the conditions and the limits - defined by the law - within we can contest a resolution for illegitimacy. Then, we outline the systematic spin-off brought by the new form of sect. 606, par. 1, e) on some institutions in the code of criminal procedure. Finally, we make the role of the Court of cassation clear in the modern criminal trial, since the 2006 reform gave no definite answer on this fundamental aspect of the question.

Mixed Mode Fracture Behaviour of Piezoelectric Materials

Piezoelectrics present an interactive electromechanical behaviour that, especially in recent years, has generated much interest since it renders these materials adapt for use in a variety of electronic and industrial applications like sensors, actuators, transducers, smart structures. Both mechanical and electric loads are generally applied on these devices and can cause high concentrations of stress, particularly in proximity of defects or inhomogeneities, such as flaws, cavities or included particles. A thorough understanding of their fracture behaviour is crucial in order to improve their performances and avoid unexpected failures. Therefore, a considerable number of research works have addressed this topic in the last decades. Most of the theoretical studies on this subject find their analytical background in the complex variable formulation of plane anisotropic elasticity. This theoretical approach bases its main origins in the pioneering works of Muskelishvili and Lekhnitskii who obtained the solution of the elastic problem in terms of independent analytic functions of complex variables. In the present work, the expressions of stresses and elastic and electric displacements are obtained as functions of complex potentials through an analytical formulation which is the application to the piezoelectric static case of an approach introduced for orthotropic materials to solve elastodynamics problems. This method can be considered an alternative to other formalisms currently used, like the Stroh’s formalism. The equilibrium equations are reduced to a first order system involving a six-dimensional vector field. After that, a similarity transformation is induced to reach three independent Cauchy-Riemann systems, so justifying the introduction of the complex variable notation. Closed form expressions of near tip stress and displacement fields are therefore obtained. In the theoretical study of cracked piezoelectric bodies, the issue of assigning consistent electric boundary conditions on the crack faces is of central importance and has been addressed by many researchers. Three different boundary conditions are commonly accepted in literature: the permeable, the impermeable and the semipermeable (“exact”) crack model. This thesis takes into considerations all the three models, comparing the results obtained and analysing the effects of the boundary condition choice on the solution. The influence of load biaxiality and of the application of a remote electric field has been studied, pointing out that both can affect to a various extent the stress fields and the angle of initial crack extension, especially when non-singular terms are retained in the expressions of the electro-elastic solution. Furthermore, two different fracture criteria are applied to the piezoelectric case, and their outcomes are compared and discussed. The work is organized as follows: Chapter 1 briefly introduces the fundamental concepts of Fracture Mechanics. Chapter 2 describes plane elasticity formalisms for an anisotropic continuum (Eshelby-Read-Shockley and Stroh) and introduces for the simplified orthotropic case the alternative formalism we want to propose. Chapter 3 outlines the Linear Theory of Piezoelectricity, its basic relations and electro-elastic equations. Chapter 4 introduces the proposed method for obtaining the expressions of stresses and elastic and electric displacements, given as functions of complex potentials. The solution is obtained in close form and non-singular terms are retained as well. Chapter 5 presents several numerical applications aimed at estimating the effect of load biaxiality, electric field, considered permittivity of the crack. Through the application of fracture criteria the influence of the above listed conditions on the response of the system and in particular on the direction of crack branching is thoroughly discussed.

Solving the cooling flow problem through mechanical AGN feedback

A fundamental gap in the current understanding of collapsed structures in the universe concerns the thermodynamical evolution of the ordinary, baryonic component. Unopposed radiative cooling of plasma would lead to the cooling catastrophe, a massive inflow of condensing gas toward the centre of galaxies, groups and clusters. The last generation of multiwavelength observations has radically changed our view on baryons, suggesting that the heating linked to the active galactic nucleus (AGN) may be the balancing counterpart of cooling. In this Thesis, I investigate the engine of the heating regulated by the central black hole. I argue that the mechanical feedback, based on massive subrelativistic outflows, is the key to solving the cooling flow problem, i.e. dramatically quenching the cooling rates for several billion years without destroying the cool-core structure. Using an upgraded version of the parallel 3D hydrodynamic code FLASH, I show that anisotropic AGN outflows can further reproduce fundamental observed features, such as buoyant bubbles, cocoon shocks, sonic ripples, metals dredge-up, and subsonic turbulence. The latter is an essential ingredient to drive nonlinear thermal instabilities, which cause cold gas condensation, a residual of the quenched cooling flow and, later, fuel for the AGN feedback engine. The self-regulated outflows are systematically tested on the scales of massive clusters, groups and isolated elliptical galaxies: in lighter less bound objects the feedback needs to be gentler and less efficient, in order to avoid drastic overheating. In this Thesis, I describe in depth the complex hydrodynamics, involving the coupling of the feedback energy to that of the surrounding hot medium. Finally, I present the merits and flaws of all the proposed models, with a critical eye toward observational concordance.

Zirconia in dentistry

The above factors emphasize the scope of this thesis for further investigations on zirconia, the improvement of all-ceramic zirconia restorations, and especially the interaction of zirconia and veneering and its influence on the performance of the whole restoration. The introduction, chapter 1, gave a literature overview on zirconia ceramics. In chapter 2, the objective of the study was to evaluate the effect of abrading before and after sintering using alumina-based abrasives on the surface of yttria-tetragonal zirconia polycrystals. Particular attention was paid to the amount of surface stress–assisted phase transformation (tetragonal→monoclinic) and the presence of microcracks. Chapter 3 is based on the idea that the conventional sintering techniques for zirconia based materials, which are commonly used in dental reconstruction, may not provide a uniform heating, with consequent generation of microstructural flaws in the final component. As a consequence of the sintering system, using microwave heating, may represent a viable alternative. The purpose of the study was to compare the dimensional variations and physical and microstructural characteristics of commercial zirconia (Y-TZP), used as a dental restoration material, sintered in conventional and microwave furnaces. Chapter 4 described the effect of sandblasting before and after sintering on the surface roughness of zirconia and the microtensile bond strength of a pressable veneering ceramic to zirconia.

Development and application of a computer-based methodology for design for additive manufacturing of automotive components

The research project aims to improve the Design for Additive Manufacturing of metal components. Firstly, the scenario of Additive Manufacturing is depicted, describing its role in Industry 4.0 and in particular focusing on Metal Additive Manufacturing technologies and the Automotive sector applications. Secondly, the state of the art in Design for Additive Manufacturing is described, contextualizing the methodologies, and classifying guidelines, rules, and approaches. The key phases of product design and process design to achieve lightweight functional designs and reliable processes are deepened together with the Computer-Aided Technologies to support the approaches implementation. Therefore, a general Design for Additive Manufacturing workflow based on product and process optimization has been systematically defined. From the analysis of the state of the art, the use of a holistic approach has been considered fundamental and thus the use of integrated product-process design platforms has been evaluated as a key element for its development. Indeed, a computer-based methodology exploiting integrated tools and numerical simulations to drive the product and process optimization has been proposed. A validation of CAD platform-based approaches has been performed, as well as potentials offered by integrated tools have been evaluated. Concerning product optimization, systematic approaches to integrate topology optimization in the design have been proposed and validated through product optimization of an automotive case study. Concerning process optimization, the use of process simulation techniques to prevent manufacturing flaws related to the high thermal gradients of metal processes is developed, providing case studies to validate results compared to experimental data, and application to process optimization of an automotive case study. Finally, an example of the product and process design through the proposed simulation-driven integrated approach is provided to prove the method's suitability for effective redesigns of Additive Manufacturing based high-performance metal products. The results are then outlined, and further developments are discussed.

What do rendering options tell us about the translating mind? Testing the choice network analysis hypothesis

Frame. Assessing the difficulty of source texts and parts thereof is important in CTIS, whether for research comparability, for didactic purposes or setting price differences in the market. In order to empirically measure it, Campbell & Hale (1999) and Campbell (2000) developed the Choice Network Analysis (CNA) framework. Basically, the CNA’s main hypothesis is that the more translation options (a group of) translators have to render a given source text stretch, the higher the difficulty of that text stretch will be. We will call this the CNA hypothesis. In a nutshell, this research project puts the CNA hypothesis to the test and studies whether it does actually measure difficulty. Data collection. Two groups of participants (n=29) of different profiles and from two universities in different countries had three translation tasks keylogged with Inputlog, and filled pre- and post-translation questionnaires. Participants translated from English (L2) into their L1s (Spanish or Italian), and worked—first in class and then at home—using their own computers, on texts ca. 800–1000 words long. Each text was translated in approximately equal halves in two 1-hour sessions, in three consecutive weeks. Only the parts translated at home were considered in the study. Results. A very different picture emerged from data than that which the CNA hypothesis might predict: there was no prevalence of disfluent task segments when there were many translation options, nor was a prevalence of fluent task segments associated to fewer translation options. Indeed, there was no correlation between the number of translation options (many and few) and behavioral fluency. Additionally, there was no correlation between pauses and both behavioral fluency and typing speed. The discussed theoretical flaws and the empirical evidence lead to the conclusion that the CNA framework does not and cannot measure text and translation difficulty.