Continuos Flow Single Cell Separation into Open Microwell Arrays

A novel design based on electric field-free open microwell arrays for the automated continuous-flow sorting of single or small clusters of cells is presented. The main feature of the proposed device is the parallel analysis of cell-cell and cell-particle interactions in each microwell of the array. High throughput sample recovery with a fast and separate transfer from the microsites to standard microtiter plates is also possible thanks to the flexible printed circuit board technology which permits to produce cost effective large area arrays featuring geometries compatible with laboratory equipment. The particle isolation is performed via negative dielectrophoretic forces which convey the particles’ into the microwells. Particles such as cells and beads flow in electrically active microchannels on whose substrate the electrodes are patterned. The introduction of particles within the microwells is automatically performed by generating the required feedback signal by a microscope-based optical counting and detection routine. In order to isolate a controlled number of particles we created two particular configurations of the electric field within the structure. The first one permits their isolation whereas the second one creates a net force which repels the particles from the microwell entrance. To increase the parallelism at which the cell-isolation function is implemented, a new technique based on coplanar electrodes to detect particle presence was implemented. A lock-in amplifying scheme was used to monitor the impedance of the channel perturbed by flowing particles in high-conductivity suspension mediums. The impedance measurement module was also combined with the dielectrophoretic focusing stage situated upstream of the measurement stage, to limit the measured signal amplitude dispersion due to the particles position variation within the microchannel. In conclusion, the designed system complies with the initial specifications making it suitable for cellomics and biotechnology applications.

The APSEL4D Monolithic Active Pixel Sensor and its Usage in a Single Electron Interference Experiment

We have realized a Data Acquisition chain for the use and characterization of APSEL4D, a 32 x 128 Monolithic Active Pixel Sensor, developed as a prototype for frontier experiments in high energy particle physics. In particular a transition board was realized for the conversion between the chip and the FPGA voltage levels and for the signal quality enhancing. A Xilinx Spartan-3 FPGA was used for real time data processing, for the chip control and the communication with a Personal Computer through a 2.0 USB port. For this purpose a firmware code, developed in VHDL language, was written. Finally a Graphical User Interface for the online system monitoring, hit display and chip control, based on windows and widgets, was realized developing a C++ code and using Qt and Qwt dedicated libraries. APSEL4D and the full acquisition chain were characterized for the first time with the electron beam of the transmission electron microscope and with 55Fe and 90Sr radioactive sources. In addition, a beam test was performed at the T9 station of the CERN PS, where hadrons of momentum of 12 GeV/c are available. The very high time resolution of APSEL4D (up to 2.5 Mfps, but used at 6 kfps) was fundamental in realizing a single electron Young experiment using nanometric double slits obtained by a FIB technique. On high statistical samples, it was possible to observe the interference and diffractions of single isolated electrons traveling inside a transmission electron microscope. For the first time, the information on the distribution of the arrival time of the single electrons has been extracted.

Each one teaches one: characterizing active forms of proteins by single molecule force spectroscopy

This Ph.D. candidate thesis collects the research work I conducted under the supervision of Prof.Bruno Samor´ı in 2005,2006 and 2007. Some parts of this work included in the Part III have been begun by myself during my undergraduate thesis in the same laboratory and then completed during the initial part of my Ph.D. thesis: the whole results have been included for the sake of understanding and completeness. During my graduate studies I worked on two very different protein systems. The theorical trait d’union between these studies, at the biological level, is the acknowledgement that protein biophysical and structural studies must, in many cases, take into account the dynamical states of protein conformational equilibria and of local physico-chemical conditions where the system studied actually performs its function. This is introducted in the introductory part in Chapter 2. Two different examples of this are presented: the structural significance deriving from the action of mechanical forces in vivo (Chapter 3) and the complexity of conformational equilibria in intrinsically unstructured proteins and amyloid formation (Chapter 4). My experimental work investigated both these examples by using in both cases the single molecule force spectroscopy technique (described in Chapter 5 and Chapter 6). The work conducted on angiostatin focused on the characterization of the relationships between the mechanochemical properties and the mechanism of action of the angiostatin protein, and most importantly their intertwining with the further layer of complexity due to disulfide redox equilibria (Part III). These studies were accompanied concurrently by the elaboration of a theorical model for a novel signalling pathway that may be relevant in the extracellular space, detailed in Chapter 7.2. The work conducted on -synuclein (Part IV) instead brought a whole new twist to the single molecule force spectroscopy methodology, applying it as a structural technique to elucidate the conformational equilibria present in intrinsically unstructured proteins. These equilibria are of utmost interest from a biophysical point of view, but most importantly because of their direct relationship with amyloid aggregation and, consequently, the aetiology of relevant pathologies like Parkinson’s disease. The work characterized, for the first time, conformational equilibria in an intrinsically unstructured protein at the single molecule level and, again for the first time, identified a monomeric folded conformation that is correlated with conditions leading to -synuclein and, ultimately, Parkinson’s disease. Also, during the research work, I found myself in the need of a generalpurpose data analysis application for single molecule force spectroscopy data analysis that could solve some common logistic and data analysis problems that are common in this technique. I developed an application that addresses some of these problems, herein presented (Part V), and that aims to be publicly released soon.

Retrieval of trace gases vertical profile in the lower atmosphere combining. Differential Optical Absorption Spectroscopy with radiative transfer models

The motivation for the work presented in this thesis is to retrieve profile information for the atmospheric trace constituents nitrogen dioxide (NO2) and ozone (O3) in the lower troposphere from remote sensing measurements. The remote sensing technique used, referred to as Multiple AXis Differential Optical Absorption Spectroscopy (MAX-DOAS), is a recent technique that represents a significant advance on the well-established DOAS, especially for what it concerns the study of tropospheric trace consituents. NO2 is an important trace gas in the lower troposphere due to the fact that it is involved in the production of tropospheric ozone; ozone and nitrogen dioxide are key factors in determining the quality of air with consequences, for example, on human health and the growth of vegetation. To understand the NO2 and ozone chemistry in more detail not only the concentrations at ground but also the acquisition of the vertical distribution is necessary. In fact, the budget of nitrogen oxides and ozone in the atmosphere is determined both by local emissions and non-local chemical and dynamical processes (i.e. diffusion and transport at various scales) that greatly impact on their vertical and temporal distribution: thus a tool to resolve the vertical profile information is really important. Useful measurement techniques for atmospheric trace species should fulfill at least two main requirements. First, they must be sufficiently sensitive to detect the species under consideration at their ambient concentration levels. Second, they must be specific, which means that the results of the measurement of a particular species must be neither positively nor negatively influenced by any other trace species simultaneously present in the probed volume of air. Air monitoring by spectroscopic techniques has proven to be a very useful tool to fulfill these desirable requirements as well as a number of other important properties. During the last decades, many such instruments have been developed which are based on the absorption properties of the constituents in various regions of the electromagnetic spectrum, ranging from the far infrared to the ultraviolet. Among them, Differential Optical Absorption Spectroscopy (DOAS) has played an important role. DOAS is an established remote sensing technique for atmospheric trace gases probing, which identifies and quantifies the trace gases in the atmosphere taking advantage of their molecular absorption structures in the near UV and visible wavelengths of the electromagnetic spectrum (from 0.25 μm to 0.75 μm). Passive DOAS, in particular, can detect the presence of a trace gas in terms of its integrated concentration over the atmospheric path from the sun to the receiver (the so called slant column density). The receiver can be located at ground, as well as on board an aircraft or a satellite platform. Passive DOAS has, therefore, a flexible measurement configuration that allows multiple applications. The ability to properly interpret passive DOAS measurements of atmospheric constituents depends crucially on how well the optical path of light collected by the system is understood. This is because the final product of DOAS is the concentration of a particular species integrated along the path that radiation covers in the atmosphere. This path is not known a priori and can only be evaluated by Radiative Transfer Models (RTMs). These models are used to calculate the so called vertical column density of a given trace gas, which is obtained by dividing the measured slant column density to the so called air mass factor, which is used to quantify the enhancement of the light path length within the absorber layers. In the case of the standard DOAS set-up, in which radiation is collected along the vertical direction (zenith-sky DOAS), calculations of the air mass factor have been made using “simple” single scattering radiative transfer models. This configuration has its highest sensitivity in the stratosphere, in particular during twilight. This is the result of the large enhancement in stratospheric light path at dawn and dusk combined with a relatively short tropospheric path. In order to increase the sensitivity of the instrument towards tropospheric signals, measurements with the telescope pointing the horizon (offaxis DOAS) have to be performed. In this circumstances, the light path in the lower layers can become very long and necessitate the use of radiative transfer models including multiple scattering, the full treatment of atmospheric sphericity and refraction. In this thesis, a recent development in the well-established DOAS technique is described, referred to as Multiple AXis Differential Optical Absorption Spectroscopy (MAX-DOAS). The MAX-DOAS consists in the simultaneous use of several off-axis directions near the horizon: using this configuration, not only the sensitivity to tropospheric trace gases is greatly improved, but vertical profile information can also be retrieved by combining the simultaneous off-axis measurements with sophisticated RTM calculations and inversion techniques. In particular there is a need for a RTM which is capable of dealing with all the processes intervening along the light path, supporting all DOAS geometries used, and treating multiple scattering events with varying phase functions involved. To achieve these multiple goals a statistical approach based on the Monte Carlo technique should be used. A Monte Carlo RTM generates an ensemble of random photon paths between the light source and the detector, and uses these paths to reconstruct a remote sensing measurement. Within the present study, the Monte Carlo radiative transfer model PROMSAR (PROcessing of Multi-Scattered Atmospheric Radiation) has been developed and used to correctly interpret the slant column densities obtained from MAX-DOAS measurements. In order to derive the vertical concentration profile of a trace gas from its slant column measurement, the AMF is only one part in the quantitative retrieval process. One indispensable requirement is a robust approach to invert the measurements and obtain the unknown concentrations, the air mass factors being known. For this purpose, in the present thesis, we have used the Chahine relaxation method. Ground-based Multiple AXis DOAS, combined with appropriate radiative transfer models and inversion techniques, is a promising tool for atmospheric studies in the lower troposphere and boundary layer, including the retrieval of profile information with a good degree of vertical resolution. This thesis has presented an application of this powerful comprehensive tool for the study of a preserved natural Mediterranean area (the Castel Porziano Estate, located 20 km South-West of Rome) where pollution is transported from remote sources. Application of this tool in densely populated or industrial areas is beginning to look particularly fruitful and represents an important subject for future studies.

Liver transplantation for transthyretin amyloidosis: experience of a single center in Italy

Liver transplantation is the only definitive treatment for transthyretin amyloidosis, with an excellent 5-year survival in endemic countries where the Met30 mutation is predominant. We report our experience of liver transplantation for transthyretin amyloidosis. We reviewed the clinical records of 17 transplanted patients (11 males, 6 females; age at liver transplant: 45.7±11.7 years). We had a wide spectrum of non-Met30 mutations (52.9%), with a predominance of Gln89 (23.5%). Five-year survival after transplantation was 43.8%; at multivariate analysis, both non-Met30 mutations (HR 17.3, 95% CI 1.03-291.7) and modified BMI (HR 0.50, 95% CI 0.29-0.87) showed significant and independent prognostic roles (P=0.048 and P=0.015, respectively). Five out of the 9 non-Met30 carriers received combined heart transplantation because of severe cardiomyopathy; they showed a trend towards a better prognosis vs. the 4 patients who did not receive combined heart transplantation (although not statistically significant; P=0.095). At follow-up, no significant improvement of transthyretin amyloidosis manifestations was observed. The results of liver transplantation for transthyretin amyloidosis in our population are poorer than those reported in the literature probably because of the high prevalence of non-Met30 mutations.

Max Bill in Italia . Lo spazio logico dell'architettura

I Max Bill is an intense giornata of a big fresco. An analysis of the main social, artistic and cultural events throughout the twentieth century is needed in order to trace his career through his masterpieces and architectures. Some of the faces of this hypothetical mural painting are, among others, Le Corbusier, Walter Gropius, Ernesto Nathan Rogers, Kandinskij, Klee, Mondrian, Vatongerloo, Ignazio Silone, while the backcloth is given by artistic avant-gardes, Bauhaus, International Exhibitions, CIAM, war events, reconstruction, Milan Triennali, Venice Biennali, the School of Ulm. Architect, even though more known as painter, sculptor, designer and graphic artist, Max Bill attends the Bauhaus as a student in the years 1927-1929, and from this experience derives the main features of a rational, objective, constructive and non figurative art. His research is devoted to give his art a scientific methodology: each work proceeds from the analysis of a problem to the logical and always verifiable solution of the same problem. By means of composition elements (such as rhythm, seriality, theme and its variation, harmony and dissonance), he faces, with consistent results, themes apparently very distant from each other as the project for the H.f.G. or the design for a font. Mathematics are a constant reference frame as field of certainties, order, objectivity: ‘for Bill mathematics are never confined to a simple function: they represent a climate of spiritual certainties, and also the theme of non attempted in its purest state, objectivity of the sign and of the geometrical place, and at the same time restlessness of the infinity: Limited and Unlimited ’. In almost sixty years of activity, experiencing all artistic fields, Max Bill works, projects, designs, holds conferences and exhibitions in Europe, Asia and Americas, confronting himself with the most influencing personalities of the twentieth century. In such a vast scenery, the need to limit the investigation field combined with the necessity to address and analyse the unpublished and original aspect of Bill’s relations with Italy. The original contribution of the present research regards this particular ‘geographic delimitation’; in particular, beyond the deep cultural exchanges between Bill and a series of Milanese architects, most of all with Rogers, two main projects have been addressed: the realtà nuova at Milan Triennale in 1947, and the Contemporary Art Museum in Florence in 1980. It is important to note that these projects have not been previously investigated, and the former never appears in the sources either. These works, together with the most well-known ones, such as the projects for the VI and IX Triennale, and the Swiss pavilion for the Biennale, add important details to the reference frame of the relations which took place between Zurich and Milan. Most of the occasions for exchanges took part in between the Thirties and the Fifties, years during which Bill underwent a significant period of artistic growth. He meets the Swiss progressive architects and the Paris artists from the Abstraction-Création movement, enters the CIAM, collaborates with Le Corbusier to the third volume of his Complete Works, and in Milan he works and gets confronted with the events related to post-war reconstruction. In these years Bill defines his own working methodology, attaining an artistic maturity in his work. The present research investigates the mentioned time period, despite some necessary exceptions. II The official Max Bill bibliography is naturally wide, including spreading works along with ones more devoted to analytical investigation, mainly written in German and often translated into French and English (Max Bill himself published his works in three languages). Few works have been published in Italian and, excluding the catalogue of the Parma exhibition from 1977, they cannot be considered comprehensive. Many publications are exhibition catalogues, some of which include essays written by Max Bill himself, some others bring Bill’s comments in a educational-pedagogical approach, to accompany the observer towards a full understanding of the composition processes of his art works. Bill also left a great amount of theoretical speculations to encourage a critical reading of his works in the form of books edited or written by him, and essays published in ‘Werk’, magazine of the Swiss Werkbund, and other international reviews, among which Domus and Casabella. These three reviews have been important tools of analysis, since they include tracks of some of Max Bill’s architectural works. The architectural aspect is less investigated than the plastic and pictorial ones in all the main reference manuals on the subject: Benevolo, Tafuri and Dal Co, Frampton, Allenspach consider Max Bill as an artist proceeding in his work from Bauhaus in the Ulm experience . A first filing of his works was published in 2004 in the monographic issue of the Spanish magazine 2G, together with critical essays by Karin Gimmi, Stanislaus von Moos, Arthur Rüegg and Hans Frei, and in ‘Konkrete Architektur?’, again by Hans Frei. Moreover, the monographic essay on the Atelier Haus building by Arthur Rüegg from 1997, and the DPA 17 issue of the Catalonia Polytechnic with contributions of Carlos Martì, Bruno Reichlin and Ton Salvadò, the latter publication concentrating on a few Bill’s themes and architectures. An urge to studying and going in depth in Max Bill’s works was marked in 2008 by the centenary of his birth and by a recent rediscovery of Bill as initiator of the ‘minimalist’ tradition in Swiss architecture. Bill’s heirs are both very active in promoting exhibitions, researching and publishing. Jakob Bill, Max Bill’s son and painter himself, recently published a work on Bill’s experience in Bauhaus, and earlier on he had published an in-depth study on ‘Endless Ribbons’ sculptures. Angela Thomas Schmid, Bill’s wife and art historian, published in end 2008 the first volume of a biography on Max Bill and, together with the film maker Eric Schmid, produced a documentary film which was also presented at the last Locarno Film Festival. Both biography and documentary concentrate on Max Bill’s political involvement, from antifascism and 1968 protest movements to Bill experiences as Zurich Municipality councilman and member of the Swiss Confederation Parliament. In the present research, the bibliography includes also direct sources, such as interviews and original materials in the form of letters correspondence and graphic works together with related essays, kept in the max+binia+jakob bill stiftung archive in Zurich. III The results of the present research are organized into four main chapters, each of them subdivided into four parts. The first chapter concentrates on the research field, reasons, tools and methodologies employed, whereas the second one consists of a short biographical note organized by topics, introducing the subject of the research. The third chapter, which includes unpublished events, traces the historical and cultural frame with particular reference to the relations between Max Bill and the Italian scene, especially Milan and the architects Rogers and Baldessari around the Fifties, searching the themes and the keys for interpretation of Bill’s architectures and investigating the critical debate on the reviews and the plastic survey through sculpture. The fourth and last chapter examines four main architectures chosen on a geographical basis, all devoted to exhibition spaces, investigating Max Bill’s composition process related to the pictorial field. Paintings has surely been easier and faster to investigate and verify than the building field. A doctoral thesis discussed in Lausanne in 1977 investigating Max Bill’s plastic and pictorial works, provided a series of devices which were corrected and adapted for the definition of the interpretation grid for the composition structures of Bill’s main architectures. Four different tools are employed in the investigation of each work: a context analysis related to chapter three results; a specific theoretical essay by Max Bill briefly explaining his main theses, even though not directly linked to the very same work of art considered; the interpretation grid for the composition themes derived from a related pictorial work; the architecture drawing and digital three-dimensional model. The double analysis of the architectural and pictorial fields is functional to underlining the relation among the different elements of the composition process; the two fields, however, cannot be compared and they stay, in Max Bill’s works as in the present research, interdependent though self-sufficient. IV An important aspect of Max Bill production is self-referentiality: talking of Max Bill, also through Max Bill, as a need for coherence instead of a method limitation. Ernesto Nathan Rogers describes Bill as the last humanist, and his horizon is the known world but, as the ‘Concrete Art’ of which he is one of the main representatives, his production justifies itself: Max Bill not only found a method, but he autonomously re-wrote the ‘rules of the game’, derived timeless theoretical principles and verified them through a rich and interdisciplinary artistic production. The most recurrent words in the present research work are synthesis, unity, space and logic. These terms are part of Max Bill’s vocabulary and can be referred to his works. Similarly, graphic settings or analytical schemes in this research text referring to or commenting Bill’s architectural projects were drawn up keeping in mind the concise precision of his architectural design. As for Mies van der Rohe, it has been written that Max Bill took art to ‘zero degree’ reaching in this way a high complexity. His works are a synthesis of art: they conceptually encompass all previous and –considered their developments- most of contemporary pictures. Contents and message are generally explicitly declared in the title or in Bill’s essays on his artistic works and architectural projects: the beneficiary is invited to go through and re-build the process of synthesis generating the shape. In the course of the interview with the Milan artist Getulio Alviani, he tells how he would not write more than a page for an essay on Josef Albers: everything was already evident ‘on the surface’ and any additional sentence would be redundant. Two years after that interview, these pages attempt to decompose and single out the elements and processes connected with some of Max Bill’s works which, for their own origin, already contain all possible explanations and interpretations. The formal reduction in favour of contents maximization is, perhaps, Max Bill’s main lesson.

Hardware and software development of a multichannel readout board named CARLOSrx for the ALICE experiment

ALICE, that is an experiment held at CERN using the LHC, is specialized in analyzing lead-ion collisions. ALICE will study the properties of quarkgluon plasma, a state of matter where quarks and gluons, under conditions of very high temperatures and densities, are no longer confined inside hadrons. Such a state of matter probably existed just after the Big Bang, before particles such as protons and neutrons were formed. The SDD detector, one of the ALICE subdetectors, is part of the ITS that is composed by 6 cylindrical layers with the innermost one attached to the beam pipe. The ITS tracks and identifies particles near the interaction point, it also aligns the tracks of the articles detected by more external detectors. The two ITS middle layers contain the whole 260 SDD detectors. A multichannel readout board, called CARLOSrx, receives at the same time the data coming from 12 SDD detectors. In total there are 24 CARLOSrx boards needed to read data coming from all the SDD modules (detector plus front end electronics). CARLOSrx packs data coming from the front end electronics through optical link connections, it stores them in a large data FIFO and then it sends them to the DAQ system. Each CARLOSrx is composed by two boards. One is called CARLOSrx data, that reads data coming from the SDD detectors and configures the FEE; the other one is called CARLOSrx clock, that sends the clock signal to all the FEE. This thesis contains a description of the hardware design and firmware features of both CARLOSrx data and CARLOSrx clock boards, which deal with all the SDD readout chain. A description of the software tools necessary to test and configure the front end electronics will be presented at the end of the thesis.

Applications of High Speed Configurable Logic Devices in Modern Particle Physics Experiments

Several activities were conducted during my PhD activity. For the NEMO experiment a collaboration between the INFN/University groups of Catania and Bologna led to the development and production of a mixed signal acquisition board for the Nemo Km3 telescope. The research concerned the feasibility study for a different acquisition technique quite far from that adopted in the NEMO Phase 1 telescope. The DAQ board that we realized exploits the LIRA06 front-end chip for the analog acquisition of anodic an dynodic sources of a PMT (Photo-Multiplier Tube). The low-power analog acquisition allows to sample contemporaneously multiple channels of the PMT at different gain factors in order to increase the signal response linearity over a wider dynamic range. Also the auto triggering and self-event-classification features help to improve the acquisition performance and the knowledge on the neutrino event. A fully functional interface towards the first level data concentrator, the Floor Control Module, has been integrated as well on the board, and a specific firmware has been realized to comply with the present communication protocols. This stage of the project foresees the use of an FPGA, a high speed configurable device, to provide the board with a flexible digital logic control core. After the validation of the whole front-end architecture this feature would be probably integrated in a common mixed-signal ASIC (Application Specific Integrated Circuit). The volatile nature of the configuration memory of the FPGA implied the integration of a flash ISP (In System Programming) memory and a smart architecture for a safe remote reconfiguration of it. All the integrated features of the board have been tested. At the Catania laboratory the behavior of the LIRA chip has been investigated in the digital environment of the DAQ board and we succeeded in driving the acquisition with the FPGA. The PMT pulses generated with an arbitrary waveform generator were correctly triggered and acquired by the analog chip, and successively they were digitized by the on board ADC under the supervision of the FPGA. For the communication towards the data concentrator a test bench has been realized in Bologna where, thanks to a lending of the Roma University and INFN, a full readout chain equivalent to that present in the NEMO phase-1 was installed. These tests showed a good behavior of the digital electronic that was able to receive and to execute command imparted by the PC console and to answer back with a reply. The remotely configurable logic behaved well too and demonstrated, at least in principle, the validity of this technique. A new prototype board is now under development at the Catania laboratory as an evolution of the one described above. This board is going to be deployed within the NEMO Phase-2 tower in one of its floors dedicated to new front-end proposals. This board will integrate a new analog acquisition chip called SAS (Smart Auto-triggering Sampler) introducing thus a new analog front-end but inheriting most of the digital logic present in the current DAQ board discussed in this thesis. For what concern the activity on high-resolution vertex detectors, I worked within the SLIM5 collaboration for the characterization of a MAPS (Monolithic Active Pixel Sensor) device called APSEL-4D. The mentioned chip is a matrix of 4096 active pixel sensors with deep N-well implantations meant for charge collection and to shield the analog electronics from digital noise. The chip integrates the full-custom sensors matrix and the sparsifification/readout logic realized with standard-cells in STM CMOS technology 130 nm. For the chip characterization a test-beam has been set up on the 12 GeV PS (Proton Synchrotron) line facility at CERN of Geneva (CH). The collaboration prepared a silicon strip telescope and a DAQ system (hardware and software) for data acquisition and control of the telescope that allowed to store about 90 million events in 7 equivalent days of live-time of the beam. My activities concerned basically the realization of a firmware interface towards and from the MAPS chip in order to integrate it on the general DAQ system. Thereafter I worked on the DAQ software to implement on it a proper Slow Control interface of the APSEL4D. Several APSEL4D chips with different thinning have been tested during the test beam. Those with 100 and 300 um presented an overall efficiency of about 90% imparting a threshold of 450 electrons. The test-beam allowed to estimate also the resolution of the pixel sensor providing good results consistent with the pitch/sqrt(12) formula. The MAPS intrinsic resolution has been extracted from the width of the residual plot taking into account the multiple scattering effect.

Funzionalizzazione della mandibola dopo ricostruzione con lembo libero rivascolarizzato di fibula "single strut". Al di là del deficit di verticalità.

Obiettivi: Valutare la modalità  più efficace per la riabilitazione funzionale del limbo libero di fibula "single strut", dopo ampie resezioni per patologia neoplastica maligna del cavo orale. Metodi: Da una casistica di 62 ricostruzioni microvascolari con limbo libero di fibula, 11 casi sono stati selezionati per essere riabilitati mediante protesi dentale a supporto implantare. 6 casi sono stati trattati senza ulteriori procedure chirurgiche ad eccezione dell'implantologia (gruppo 1), affrontando il deficit di verticalità  della fibula attraverso la protesi dentaria, mentre i restanti casi sono stati trattati con la distrazione osteogenetica (DO) della fibula prima della riabilitazione protesica (gruppo 2). Il deficit di verticalità  fibula/mandibola è stato misurato. I criteri di valutazione utilizzati includono la misurazione clinica e radiografica del livello osseo e dei tessuti molli peri-implantari, ed il livello di soddisfazione del paziente attraverso un questionario appositamente redatto. Risultati: Tutte le riabilitazioni protesiche sono costituite da protesi dentali avvitate su impianti. L'età  media è di 52 anni, il rapporto uomini/donne è di 6/5. Il numero medio di impianti inseriti nelle fibule è di 5. Il periodo massimo di follow-up dopo il carico masticatorio è stato di 30 mesi per il gruppo 1 e di 38.5 mesi (17-81) di media per il gruppo 2. Non abbiamo riportato complicazioni chirurgiche. Nessun impianto è stato rimosso dai pazienti del gruppo 1, la perdita media di osso peri-implantare registrata è stata di 1,5 mm. Nel gruppo 2 sono stati riportati un caso di tipping linguale del vettore di distrazione durante la fase di consolidazione e un caso di frattura della corticale basale in assenza di formazione di nuovo osso. L'incremento medio di osso in verticalità è stato di 13,6 mm (12-15). 4 impianti su 32 (12.5%) sono andati persi dopo il periodo di follow-up. Il riassorbimento medio peri-implantare, è stato di 2,5 mm. Conclusioni: Le soluzioni più utilizzate per superare il deficit di verticalità  del limbo libero di fibula consistono nell'allestimento del lembo libero di cresta iliaca, nel posizionare la fibula in posizione ideale da un punto di vista protesico a discapito del profilo osseo basale, l'utilizzo del lembo di fibula nella versione descritta come "double barrel", nella distrazione osteogenetica della fibula. La nostra esperienza concerne il lembo libero di fibula che nella patologia neoplastica maligna utilizziamo nella versione "single strut", per mantenere disponibili tutte le potenzialità  di lunghezza del peduncolo vascolare, senza necessità  di innesti di vena. Entrambe le soluzioni, la protesi dentale ortopedica e la distrazione osteogenetica seguita da protesi, entrambe avvitate su impianti, costituiscono soluzioni soddisfacenti per la riabilitazione funzionale della fibula al di là  del suo deficit di verticalità . La prima soluzione ha preso spunto dall'osservazione dei buoni risultati della protesi dentale su impianti corti, avendo un paragonabile rapporto corona/radice, la DO applicata alla fibula, sebbene sia risultata una metodica con un numero di complicazioni più elevato ed un maggior livello di riassorbimento di osso peri-implantare, costituisce in ogni caso una valida opzione riabilitativa, specialmente in caso di notevole discrepanza mandibulo/fibulare. Decisiva è la scelta del percorso terapeutico dopo una accurata valutazione di ogni singolo caso. Vengono illustrati i criteri di selezione provenienti dalla nostra esperienza.

Il ruolo delle idee e del loro cambiamento nei processi di policy making universitario nel mondo anglosassone dagli anni ottanta ad oggi. I casi di Inghilterra e Nuova Zelanda in prospettiva comparata

THE TITLE OF MY THESIS IS THE ROLE OF THE IDEAS AND THEIR CHANGE IN HIGHER EDUCATION POLICY-MAKING PROCESSES FROM THE EIGHTIES TO PRESENT-DAY: THE CASES OF ENGLAND AND NEW ZEALAND IN COMPARATIVE PERSPECTIVE UNDER A THEORETICAL POINT OF VIEW, THE AIM OF MY WORK IS TO CARRY OUT A RESEARCH MODELLED ON THE CONSTRUCTIVIST THEORY. IT FOCUSES ON THE ANALYSIS OF THE IMPACT OF IDEAS ON THE PROCESSES OF POLICY MAKING BY MEANS OF EPISTEMIC COMMUNITIES, THINK TANKS AND VARIOUS SOCIOECONOMIC CONTEXTS THAT MAY HAVE PLAYED A KEY ROLE IN THE CONSTRUCTION OF THE DIFFERENT PATHS. FROM MY POINT OF VIEW IDEAS CONSTITUTE A PRIORITY RESEARCH FIELD WHICH IS WORTH ANALYSING SINCE THEIR ROLE IN POLICY MAKING PROCESSES HAS BEEN TRADITIONALLY RATHER UNEXPLORED. IN THIS CONTEXT AND WITH THE AIM OF DEVELOPING A RESEARCH STRAND BASED ON THE ROLE OF IDEAS, I INTEND TO CARRY ON MY STUDY UNDER THE PERSPECTIVE OF CHANGE. DEPENDING ON THE DATA AND INFORMATION THAT I COLLECTED I EVALUATED THE WEIGHT OF EACH OF THESE VARIABLES AND MAYBE OTHERS SUCH AS THE INSTITUTIONS AND THE INDIVIDUAL INTERESTS, WHICH MAY HAVE INFLUENCED THE FORMATION OF THE POLICY MAKING PROCESSES. UNDER THIS LIGHT, I PLANNED TO ADOPT THE QUALITATIVE METHODOLOGY OF RESEARCH WHICH I BELIEVE TO BE VERY EFFECTIVE AGAINST THE MORE DIFFICULT AND POSSIBLY REDUCTIVE APPLICATION OF QUANTITIVE DATA SETS. I RECKON THEREFORE THAT THE MOST APPROPRIATE TOOLS FOR INFORMATION PROCESSING INCLUDE CONTENT ANALYSIS, AND IN-DEPTH INTERVIEWS TO PERSONALITIES OF THE POLITICAL PANORAMA (ÉLITE OR NOT) WHO HAVE PARTICIPATED IN THE PROCESS OF HIGHER EDUCATION REFORM FROM THE EIGHTIES TO PRESENT-DAY. THE TWO CASES TAKEN INTO CONSIDERATION SURELY SET AN EXAMPLE OF RADICAL REFORM PROCESSES WHICH HAVE OCCURRED IN QUITE DIFFERENT CONTEXTS DETERMINED BY THE SOCIOECONOMIC CHARACTERISTICS AND THE TRAITS OF THE ÉLITE. IN NEW ZEALAND THE DESCRIBED PROCESS HAS TAKEN PLACE WITH A STEADY PACE AND A GOOD GRADE OF CONSEQUANTIALITY, IN LINE WTH THE REFORMS IN OTHER STATE DIVISIONS DRIVEN BY THE IDEAS OF THE NEW PUBLIC MANAGEMENT. CONTRARILY IN ENGLAND THE REFORMATIVE ACTION OF MARGARET THATCHER HAS ACQUIRED A VERY RADICAL CONNOTATION AS IT HAS BROUGHT INTO THE AMBIT OF HIGHER EDUCATION POLICY CONCEPTS LIKE EFFICIENCY, EXCELLENCE, RATIONALIZATION THAT WOULD CONTRAST WITH THE GENERALISTIC AND MASS-ORIENTED IDEAS THAT WERE FASHIONABLE DURING THE SEVENTIES. THE MISSION I INTEND TO ACCOMPLISH THORUGHOUT MY RESEARCH IS TO INVESTIGATE AND ANALYSE INTO MORE DEPTH THE DIFFERENCES THAT SEEM TO EMERGE FROM TWO CONTEXTS WHICH MOST OF THE LITERATURE REGARDS AS A SINGLE MODEL: THE ANGLO-SAXON MODEL. UNDER THIS LIGHT, THE DENSE ANALYSIS OF POLICY PROCESSES ALLOWED TO BRING OUT BOTH THE CONTROVERSIAL AND CONTRASTING ASPECTS OF THE TWO REALITIES COMPARED, AND THE ROLE AND WEIGHT OF VARIABLES SUCH AS IDEAS (MAIN VARIABLE), INSTITUTIONAL SETTINGS AND INDIVIDUAL INTERESTS ACTING IN EACH CONTEXT. THE CASES I MEAN TO ATTEND PRESENT PECULIAR ASPECTS WORTH DEVELOPING AN IN-DEPTH ANALYSIS, AN OUTLINE OF WHICH WILL BE PROVIDED IN THIS ABSTRACT. ENGLAND THE CONSERVATIVE GOVERNMENT, SINCE 1981, INTRODUCED RADICAL CHANGES IN THE SECTOR OF HIGHER EDUCATION: FIRST CUTTING DOWN ON STATE FUNDINGS AND THEN WITH THE CREATION OF AN INSTITUTION FOR THE PLANNING AND LEADERSHIP OF THE POLYTECHNICS (NON-UNIVERSITY SECTOR). AFTERWARDS THE SCHOOL REFORM BY MARGARET THATCHER IN 1988 RAISED TO A GREAT STIR ALL OVER EUROPE DUE TO BOTH ITS CONSIDERABLE INNOVATIVE IMPRINT AND THE STRONG ATTACK AGAINST THE PEDAGOGY OF THE ‘ACTIVE’ SCHOOLING AND PROGRESSIVE EDUCATION, UNTIL THEN RECOGNIZED AS A MERIT OF THE BRITISH PUBLIC SCHOOL. IN THE AMBIT OF UNIVERSITY EDUCATION THIS REFORM, TOGETHER WITH SIMILAR MEASURES BROUGHT IN DURING 1992, PUT INTO PRACTICE THE CONSERVATIVE PRINCIPLES THROUGH A SERIES OF ACTIONS THAT INCLUDED: THE SUPPRESSION OF THE IRREMOVABILITY PRINCIPLE FOR UNIVERSITY TEACHERS; THE INTRODUCTION OF STUDENT LOANS FOR LOW-INCOME STUDENTS AND THE CANCELLATION OF THE CLEAR DISTINCTION BETWEEN UNIVERSITIES AND POLYTECHNICS. THE POLICIES OF THE LABOUR MAJORITY OF MR BLAIR DID NOT QUITE DIVERGE FROM THE CONSERVATIVES’ POSITION. IN 2003 BLAIR’S CABINET RISKED TO BECOME A MINORITY RIGHT ON THE OCCASION OF AN IMPORTANT UNIVERSITY REFORM PROPOSAL. THIS PROPOSAL WOULD FORESEE THE AUTONOMY FOR THE UNIVERSITIES TO RAISE UP TO 3.000 POUNDS THE ENROLMENT FEES FOR STUDENTS (WHILE FORMERLY THE CEILING WAS 1.125 POUNDS). BLAIR HAD TO FACE INTERNAL OPPOSITION WITHIN HIS OWN PARTY IN RELATION TO A MEASURE THAT, ACCORDING TO THE 150 MPS PROMOTERS OF AN ADVERSE MOTION, HAD NOT BEEN INCLUDED IN THE ELECTORAL PROGRAMME AND WOULD RISK CREATING INCOME-BASED DISCRIMINATION AMONG STUDENTS. AS A MATTER OF FACT THE BILL FOCUSED ON THE INTRODUCTION OF VERY LOW-INTEREST STUDENT LOANS TO BE SETTLED ONLY WHEN THE STUDENT WOULD HAVE FOUND A REMUNERATED OCCUPATION (A SYSTEM ALREADY PROVIDED FOR BY THE AUSTRALIAN LEGISLATION). NEW ZEALAND CONTRARILY TO MANY OTHER COUNTRIES, NEW ZEALAND HAS ADOPTED A VERY WIDE VISION OF THE TERTIARY EDUCATION. IT INCLUDES IN FACT THE FULL EDUCATIONAL PROGRAMME THAT IS INTERNATIONALLY RECOGNIZED AS THE POST-SECONDARY EDUCATION. SHOULD WE SPOTLIGHT A PECULIARITY OF THE NEW ZEALAND TERTIARY EDUCATION POLICY THEN IT WOULD BE ‘CHANGE’. LOOKING AT THE REFORM HISTORY RELATED TO THE TERTIARY EDUCATION SYSTEM, WE CAN CLEARLY IDENTIFY FOUR ‘SUB-PERIODS’ FROM THE EIGHTIES TO PRESENT-DAY: 1. BEFORE THE 80S’: AN ELITARIAN SYSTEM CHARACTERIZED BY LOW PARTICIPATION RATES. 2. BETWEEN MID AND LATE 80S’: A TREND TOWARDS THE ENLARGEMENT OF PARTICIPATION ASSOCIATED TO A GREATER COMPETITION. 3. 1990-1999: A FUTHER STEP TOWARDS A COMPETITIVE MODEL BASED ON THE MARKET-ORIENTED SYSTEM. 4. FROM 2000 TO TODAY: A CONTINUOUS EVOLUTION TOWARDS A MORE COMPETITIVE MODEL BASED ON THE MARKET-ORIENTED SYSTEM TOGETHER WITH A GROWING ATTENTION TO STATE CONTROL FOR SOCIAL AND ECONOMIC DEVELOPMENT OF THE NATION. AT PRESENT THE GOVERNMENT OF NEW ZEALAND OPERATES TO STRENGHTHEN THIS PROCESS, PRIMARILY IN RELATION TO THE ROLE OF TERTIARY EDUCATION AS A STEADY FACTOR OF NATIONAL WALFARE, WHERE PROFESSIONAL DEVELOPMENT CONTRIBUTES ACTIVELY TO THE GROWTH OF THE NATIONAL ECONOMIC SYSTEM5. THE CASES OF ENGLAND AND NEW ZEALAND ARE THE FOCUS OF AN IN-DEPTH INVESTIGATION THAT STARTS FROM AN ANALYSIS OF THE POLICIES OF EACH NATION AND DEVELOP INTO A COMPARATIVE STUDY. AT THIS POINT I ATTEMPT TO DRAW SOME PRELIMINARY IMPRESSIONS ON THE FACTS ESSENTIALLY DECRIBED ABOVE. THE UNIVERSITY POLICIES IN ENGLAND AND NEW ZEALAND HAVE BOTH UNDERGONE A SIGNIFICANT REFORMATORY PROCESS SINCE THE EARLY EIGHTIES; IN BOTH CONTEXTS THE IMPORTANCE OF IDEAS THAT CONSTITUTED THE BASE OF POLITICS UNTIL 1980 WAS QUITE RELEVANT. GENERALLY SPEAKING, IN BOTH CASES THE PRE-REFORM POLICIES WERE INSPIRED BY EGALITARIANISM AND EXPANSION OF THE STUDENT POPULATION WHILE THOSE BROUGHT IN BY THE REFORM WOULD PURSUE EFFICIENCY, QUALITY AND COMPETITIVENESS. UNDOUBTEDLY, IN LINE WITH THIS GENERAL TENDENCY THAT REFLECTS THE HYPOTHESIS PROPOSED, THE TWO UNIVERSITY SYSTEMS PRESENT SEVERAL DIFFERENCES. THE UNIVERSITY SYSTEM IN NEW ZEALAND PROCEEDED STEADILY TOWARDS THE IMPLEMENTATION OF A MANAGERIAL CONCEPTION OF TERTIARY EDUCATION, ESPECIALLY FROM 1996 ONWARDS, IN ACCORDANCE WITH THE REFORMATORY PROCESS OF THE WHOLE PUBLIC SECTOR. IN THE UNITED KINGDOM, AS IN THE REST OF EUROPE, THE NEW APPROACH TO UNIVERSITY POLICY-MAKING HAD TO CONFRONT A DEEP-ROOTED TRADITION OF PROGRESSIVE EDUCATION AND THE IDEA OF EDUCATION EXPANSION THAT IN FACT DOMINATED UNTIL THE EIGHTIES. FROM THIS VIEW POINT THE GOVERNING ACTION OF MARGARET THATCHER GAVE RISE TO A RADICAL CHANGE THAT REVOLUTIONIZED THE OBJECTIVES AND KEY VALUES OF THE WHOLE EDUCATIONAL SYSTEM, IN PARTICULAR IN THE HIGHER EDUCATION SECTOR. IDEAS AS EFFICIENCY, EXCELLENCE AND CONTROL OF THE PERFORMANCE BECAME DECISIVE. THE LABOUR CABINETS OF BLAIR DEVELOPED IN THE WAKE OF CONSERVATIVE REFORMS. THIS APPEARS TO BE A FOCAL POINT OF THIS STUDY THAT OBSERVES HOW ALSO IN NEW ZEALAND THE REFORMING PROCESS OCCURRED TRANSVERSELY DURING PROGRESSIVE AND CONSERVATIVE ADMINISTRATIONS. THE PRELIMINARY IMPRESSION IS THEREFORE THAT IDEAS DEEPLY MARK THE REFORMATIVE PROCESSES: THE AIM OF MY RESEARCH IS TO VERIFY TO WHICH EXTENT THIS STATEMENT IS TRUE. IN ORDER TO BUILD A COMPREHENSIVE ANALYLIS, FURTHER SIGNIFICANT FACTORS WILL HAVE TO BE INVESTIGATED: THE WAY IDEAS ARE PERCEIVED AND IMPLEMENTED BY THE DIFFERENT POLITICAL ELITES; HOW THE VARIOUS SOCIOECONOMIC CONTEXTS INFLUENCE THE REFORMATIVE PROCESS; HOW THE INSTITUTIONAL STRUCTURES CONDITION THE POLICY-MAKING PROCESSES; WHETHER INDIVIDUAL INTERESTS PLAY A ROLE AND, IF YES, TO WHICH EXTENT.

The dark side of the board: advances in chess Kriegspiel

While imperfect information games are an excellent model of real-world problems and tasks, they are often difficult for computer programs to play at a high level of proficiency, especially if they involve major uncertainty and a very large state space. Kriegspiel, a variant of chess making it similar to a wargame, is a perfect example: while the game was studied for decades from a game-theoretical viewpoint, it was only very recently that the first practical algorithms for playing it began to appear. This thesis presents, documents and tests a multi-sided effort towards making a strong Kriegspiel player, using heuristic searching, retrograde analysis and Monte Carlo tree search algorithms to achieve increasingly higher levels of play. The resulting program is currently the strongest computer player in the world and plays at an above-average human level.

The Enhanced Single-dish Control System and wide surveys of compact sources

The Italian radio telescopes currently undergo a major upgrade period in response to the growing demand for deep radio observations, such as surveys on large sky areas or observations of vast samples of compact radio sources. The optimised employment of the Italian antennas, at first constructed mainly for VLBI activities and provided with a control system (FS – Field System) not tailored to single-dish observations, required important modifications in particular of the guiding software and data acquisition system. The production of a completely new control system called ESCS (Enhanced Single-dish Control System) for the Medicina dish started in 2007, in synergy with the software development for the forthcoming Sardinia Radio Telescope (SRT). The aim is to produce a system optimised for single-dish observations in continuum, spectrometry and polarimetry. ESCS is also planned to be installed at the Noto site. A substantial part of this thesis work consisted in designing and developing subsystems within ESCS, in order to provide this software with tools to carry out large maps, spanning from the implementation of On-The-Fly fast scans (following both conventional and innovative observing strategies) to the production of single-dish standard output files and the realisation of tools for the quick-look of the acquired data. The test period coincided with the commissioning phase for two devices temporarily installed – while waiting for the SRT to be completed – on the Medicina antenna: a 18-26 GHz 7-feed receiver and the 14-channel analogue backend developed for its use. It is worth stressing that it is the only K-band multi-feed receiver at present available worldwide. The commissioning of the overall hardware/software system constituted a considerable section of the thesis work. Tests were led in order to verify the system stability and its capabilities, down to sensitivity levels which had never been reached in Medicina using the previous observing techniques and hardware devices. The aim was also to assess the scientific potential of the multi-feed receiver for the production of wide maps, exploiting its temporary availability on a mid-sized antenna. Dishes like the 32-m antennas at Medicina and Noto, in fact, offer the best conditions for large-area surveys, especially at high frequencies, as they provide a suited compromise between sufficiently large beam sizes to cover quickly large areas of the sky (typical of small-sized telescopes) and sensitivity (typical of large-sized telescopes). The KNoWS (K-band Northern Wide Survey) project is aimed at the realisation of a full-northern-sky survey at 21 GHz; its pilot observations, performed using the new ESCS tools and a peculiar observing strategy, constituted an ideal test-bed for ESCS itself and for the multi-feed/backend system. The KNoWS group, which I am part of, supported the commissioning activities also providing map-making and source-extraction tools, in order to complete the necessary data reduction pipeline and assess the general system scientific capabilities. The K-band observations, which were carried out in several sessions along the December 2008-March 2010 period, were accompanied by the realisation of a 5 GHz test survey during the summertime, which is not suitable for high-frequency observations. This activity was conceived in order to check the new analogue backend separately from the multi-feed receiver, and to simultaneously produce original scientific data (the 6-cm Medicina Survey, 6MS, a polar cap survey to complete PMN-GB6 and provide an all-sky coverage at 5 GHz).

A Unitary Approach to Information and Estimation Theory in Digital Communication Systems

This thesis presents the outcomes of a Ph.D. course in telecommunications engineering. It is focused on the optimization of the physical layer of digital communication systems and it provides innovations for both multi- and single-carrier systems. For the former type we have first addressed the problem of the capacity in presence of several nuisances. Moreover, we have extended the concept of Single Frequency Network to the satellite scenario, and then we have introduced a novel concept in subcarrier data mapping, resulting in a very low PAPR of the OFDM signal. For single carrier systems we have proposed a method to optimize constellation design in presence of a strong distortion, such as the non linear distortion provided by satellites' on board high power amplifier, then we developed a method to calculate the bit/symbol error rate related to a given constellation, achieving an improved accuracy with respect to the traditional Union Bound with no additional complexity. Finally we have designed a low complexity SNR estimator, which saves one-half of multiplication with respect to the ML estimator, and it has similar estimation accuracy.