Fracture Mechanics Investigation of Structures with Defects

Fracture mechanics plays an important role in the material science, structure design and industrial production due to the failure of materials and structures are paid high attention in human activities. This dissertation, concentrates on some of the fractural aspects of shaft and composite which have being increasingly used in modern structures, consists four chapters within two parts. Chapters 1 to 4 are included in part 1. In the first chapter, the basic knowledge about the stress and displacement fields in the vicinity of a crack tip is introduced. A review involves the general methods of calculating stress intensity factors are presented. In Chapter 2, two simple engineering methods for a fast and close approximation of stress intensity factors of cracked or notched beams under tension, bending moment, shear force, as well as torque are presented. New formulae for calculating the stress intensity factors are proposed. One of the methods named Section Method is improved and applied to the three dimensional analysis of cracked circular section for calculating stress intensity factors. The comparisons between the present results and the solutions calculated by ABAQUS for single mode and mixed mode are studied. In chapter 3, fracture criteria for a crack subjected to mixed mode loading of two-dimension and three-dimension are reviewed. The crack extension angle for single mode and mixed mode, and the critical loading domain obtained by SEDF and MTS are compared. The effects of the crack depth and the applied force ratio on the crack propagation angle and the critical loading are investigated. Three different methods calculating the crack initiation angle for three-dimension analysis of various crack depth and crack position are compared. It should be noted that the stress intensity factors used in the criteria are calculated in section 2.1.

Functional and molecular characterization of ethylene responsive factor genes involved in grape ripening

Grape berry is considered a non climacteric fruit, but there are some evidences that ethylene plays a role in the control of berry ripening. This PhD thesis aimed to give insights in the role of ethylene and ethylene-related genes in the regulation of grape berry ripening. During this study a small increase in ethylene concentration one week before véraison has been measured in Vitis vinifera L. ‘Pinot Noir’ grapes confirming previous findings in ‘Cabernet Sauvignon’. In addition, ethylene-related genes have been identified in the grapevine genome sequence. Similarly to other species, biosynthesis and ethylene receptor genes are present in grapevine as multi-gene families and their expression appeared tissue or developmental specific. All the other elements of the ethylene signal transduction cascade were also identified in the grape genome. Among them, there were ethylene response factors (ERF) which modulate the transcription of many effector genes in response to ethylene. In this study seven grapevine ERFs have been characterized and they showed tissue and berry development specific expression profiles. Two sequences, VvERF045 and VvERF063, seemed likely involved in berry ripening control due to their expression profiles and their sequence annotation. VvERF045 was induced before véraison and was specific of the ripe berry, by sequence similarity it was likely a transcription activator. VvERF063 displayed high sequence similarity to repressors of transcription and its expression, very high in green berries, was lowest at véraison and during ripening. To functionally characterize VvERF045 and VvERF063, a stable transformation strategy was chosen. Both sequences were cloned in vectors for over-expression and silencing and transferred in grape by Agrobacterium-mediated or biolistic-mediated gene transfer. In vitro, transgenic VvERF045 over-expressing plants displayed an epinastic phenotype whose extent was correlated to the transgene expression level. Four pathogen stress response genes were significantly induced in the transgenic plants, suggesting a putative function of VvERF045 in biotic stress defense during berry ripening. Further molecular analysis on the transgenic plants will help in identifying the actual VvERF045 target genes and together with the phenotypic characterization of the adult transgenic plants, will allow to extensively define the role of VvERF045 in berry ripening.

Fault delineation and stress orientations from the analysis of background, low magnitude seismicity in Southern Apennines (Italy)

The aim of this work was to show that refined analyses of background, low magnitude seismicity allow to delineate the main active faults and to accurately estimate the directions of the regional tectonic stress that characterize the Southern Apennines (Italy), a structurally complex area with high seismic potential. Thanks the presence in the area of an integrated dense and wide dynamic network, was possible to analyzed an high quality microearthquake data-set consisting of 1312 events that occurred from August 2005 to April 2011 by integrating the data recorded at 42 seismic stations of various networks. The refined seismicity location and focal mechanisms well delineate a system of NW-SE striking normal faults along the Apenninic chain and an approximately E-W oriented, strike-slip fault, transversely cutting the belt. The seismicity along the chain does not occur on a single fault but in a volume, delimited by the faults activated during the 1980 Irpinia M 6.9 earthquake, on sub-parallel predominant normal faults. Results show that the recent low magnitude earthquakes belongs to the background seismicity and they are likely generated along the major fault segments activated during the most recent earthquakes, suggesting that they are still active today thirty years after the mainshock occurrences. In this sense, this study gives a new perspective to the application of the high quality records of low magnitude background seismicity for the identification and characterization of active fault systems. The analysis of the stress tensor inversion provides two equivalent models to explain the microearthquake generation along both the NW-SE striking normal faults and the E- W oriented fault with a dominant dextral strike-slip motion, but having different geological interpretations. We suggest that the NW-SE-striking Africa-Eurasia convergence acts in the background of all these structures, playing a primary and unifying role in the seismotectonics of the whole region.

Streptococcus agalactiae adapts to glucose stress conditions by modulating gene expression profile

Diabetes mellitus is considered a risk factor for Group B Streptococcus (GBS) infections. Typically, this pathology is associated to high glucose levels in the bloodstream. Although clinical evidences support this notion, the physiological mechanisms underlying GBS adaptation to such conditions are not yet defined. In the attempt to address this issue, we performed comparative global gene expression analysis of GBS grown under glucose-stress conditions and observed that a number of metabolic and virulence genes was differentially regulated. Of importance, we also demonstrated that by knocking-out the csrRS locus the transcription profile of GBS grown in high-glucose conditions was profoundly affected, with more than a third of glucose-dependent genes, including the virulence factor bibA, found to be controlled by this two-component system. Furthermore, in vitro molecular analysis showed that CsrR specifically binds to the bibA promoter and the phosphorilation increases the affinity of the regulator to this promoter region. Moreover, we demonstrated that CsrR acts as a repressor of bibA expression by binding to its promoter in vivo. In conclusion, this work by elucidating both the response of GBS to pathological glucose conditions and the underlined molecular mechanisms will set the basis for a better understanding of GBS pathogenesis.

Dissecting the role of IGF2BP3 in the stress-adaptive response and in intercellular communication in Ewing Sarcoma.

Tumor microenvironment has emerged as key factor influencing tumor progression and metastatization. In this context, small vesicles produced by cancer cells can influence the fate of their surroundings via the horizontal transfer of specific molecular cargos. Ewing Sarcoma, the second most common bone tumor in young patients, presents early metastasis associated to worse prognosis. The RNA binding protein Insulin-like Growth Factor 2 mRNA Binding Protein 3 (IGF2BP3) exerts a pro-oncogenic role associated with metastasis formation and worse prognosis in Ewing Sarcoma. Our aim was to investigate the still unexplored role of IGF2BP3 in the stress-adaptive response to tumor microenvironment and in the interactions between Ewing Sarcoma cells. Hypoxia is a major feature of Ewing Sarcoma microenvironment and we demonstrated that IGF2BP3 can direct the CXCR4-mediated migratory response to CXCL12 in Ewing Sarcoma cells subjected to oxygen deprivation. We also discovered that the interaction between IGF2BP3 and CXCR4 is regulated through CD164 and which colocalize at plasma membrane level, upon CXCL12 exposure. Interestingly, high IGF2BP3 levels in Ewing Sarcoma metastatic lesions positively correlated with the expression of both CD164 and CXCR4, indicating the IGF2BP3/CD164/CXCR4 oncogenic axis as a critical modulator of Ewing Sarcoma metastatic progression. We demonstrated for the first time that IGF2BP3 is loaded into Ewing Sarcoma derived exosomes, accordingly to its cellular levels. We discovered that IGF2BP3+ exosomes carry high levels of IGF2BP3-client mRNAs involved in cellular migration, CD164 and IGF1R, and, by transferring this cargo, sustain the migratory abilities of receiving cells, induce a sharp up-regulation of CD164, CXCR4 and IGF1R and enhance the activation of AKT/mTOR and ERK down-stream signalling pathways. We demostrated that the pro-tumorigenic role of IGF2BP3 is not only exerted at cellular level, but that intercellular communication is crucial in the context of Ewing Sarcoma microenvironment.

Effects of stochastic hypoxia events on the benthic communities of transitional waters

Hypoxia is one of the most important and faster spreading threats to marine life and its occurrence has significantly increased in the last century. The effects of hypoxia on marine organisms and communities has mostly been studied in light of the intensity of the disturbance but not a lot of attention has been given to its interaction with other stressors and the timing of its appearance. In this thesis I started to explore these topics through laboratory and manipulative field experiments. I studied the interactive effects of thermal stress and hypoxia on a European native bivalve species (Cerastoderma edule; Linnaeus, 1758 ) and a non native one (Ruditapes philippinarum; Adams & Reeve, 1850) through a laboratory experiment performed in the Netherlands. The non native species displayed a greater tolerance to oxygen depletion than the native one. The first field experiment was performed in an Italian brackish coastal lagoon (Pialassa Baiona) and tested the effects of different timing regimes of hypoxia on the benthic community. It emerged that the main factor affecting the community is the duration of the hypoxia. The ability of the communities to recover after repeated hypoxic periods was explored in the second manipulative field experiment. We imposed three different timing regimes of hypoxia on sediment patches in Pialassa Baiona and we monitored the changes of both the benthic and the microbial communities after the disturbances. The preliminary analyses of the data from this last work suggest that the experimental manipulations caused limited detrimental effects on the communities. Overall this thesis work suggests that the duration of hypoxic events, their repetitive nature and the associated thermal stress are key factors in determining their effects on the communities and that management measures should point towards a reduction of the duration of the single hypoxic periods more than their frequency.

Integrating the age factor in designing industrial environments and workstations in the workforce ageing era

As people spend a third of their lives at work and, in most cases, indoors, the work environment assumes crucial importance. The continuous and dynamic interaction between people and the working environment surrounding them produces physiological and psychological effects on operators. Recognizing the substantial impact of comfort and well-being on employee satisfaction and job performance, the literature underscores the need for industries to implement indoor environment control strategies to ensure long-term success and profitability. However, managing physical risks (i.e., ergonomic and microclimate) in industrial environments is often constrained by production and energy requirements. In the food processing industry, for example, the safety of perishable products dictates storage temperatures that do not allow for operator comfort. Conversely, warehouses dedicated to non-perishable products often lack cooling systems to limit energy expenditure, reaching high temperatures in the summer period. Moreover, exceptional events, like the COVID-19 pandemic, introduce new constraints, with recommendations impacting thermal stress and respiratory health. Furthermore, the thesis highlights how workers' variables, particularly the aging process, reduce tolerance to environmental stresses. Consequently, prolonged exposure to environmental stress conditions at work results in cardiovascular disease and musculoskeletal disorders. In response to the global trend of an aging workforce, the thesis bridges a literature gap by proposing methods and models that integrate the age factor into comfort assessment. It aims to present technical and technological solutions to mitigate microclimate risks in industrial environments, ultimately seeking innovative ways to enhance the aging workforce's comfort, performance, experience, and skills. The research outlines a logical-conceptual scheme with three main areas of focus: analyzing factors influencing the work environment, recognizing constraints to worker comfort, and designing solutions. The results significantly contribute to science by laying the foundation for new research in worker health and safety in an ageing working population's extremely current industrial context.