Nano-Power Integrated Circuits for Energy Harvesting

The energy harvesting research field has grown considerably in the last decade due to increasing interests in energy autonomous sensing systems, which require smart and efficient interfaces for extracting power from energy source and power management (PM) circuits. This thesis investigates the design trade-offs for minimizing the intrinsic power of PM circuits, in order to allow operation with very weak energy sources. For validation purposes, three different integrated power converter and PM circuits for energy harvesting applications are presented. They have been designed for nano-power operations and single-source converters can operate with input power lower than 1 μW. The first IC is a buck-boost converter for piezoelectric transducers (PZ) implementing Synchronous Electrical Charge Extraction (SECE), a non-linear energy extraction technique. Moreover, Residual Charge Inversion technique is exploited for extracting energy from PZ with weak and irregular excitations (i.e. lower voltage), and the implemented PM policy, named Two-Way Energy Storage, considerably reduces the start-up time of the converter, improving the overall conversion efficiency. The second proposed IC is a general-purpose buck-boost converter for low-voltage DC energy sources, up to 2.5 V. An ultra-low-power MPPT circuit has been designed in order to track variations of source power. Furthermore, a capacitive boost circuit has been included, allowing the converter start-up from a source voltage VDC0 = 223 mV. A nano-power programmable linear regulator is also included in order to provide a stable voltage to the load. The third IC implements an heterogeneous multisource buck-boost converter. It provides up to 9 independent input channels, of which 5 are specific for PZ (with SECE) and 4 for DC energy sources with MPPT. The inductor is shared among channels and an arbiter, designed with asynchronous logic to reduce the energy consumption, avoids simultaneous access to the buck-boost core, with a dynamic schedule based on source priority.

Ultra-Low Power and Non-intrusive Wireless Monitoring for Smart Buildings

Wireless Sensor Networks (WSNs) offer a new solution for distributed monitoring, processing and communication. First of all, the stringent energy constraints to which sensing nodes are typically subjected. WSNs are often battery powered and placed where it is not possible to recharge or replace batteries. Energy can be harvested from the external environment but it is a limited resource that must be used efficiently. Energy efficiency is a key requirement for a credible WSNs design. From the power source's perspective, aggressive energy management techniques remain the most effective way to prolong the lifetime of a WSN. A new adaptive algorithm will be presented, which minimizes the consumption of wireless sensor nodes in sleep mode, when the power source has to be regulated using DC-DC converters. Another important aspect addressed is the time synchronisation in WSNs. WSNs are used for real-world applications where physical time plays an important role. An innovative low-overhead synchronisation approach will be presented, based on a Temperature Compensation Algorithm (TCA). The last aspect addressed is related to self-powered WSNs with Energy Harvesting (EH) solutions. Wireless sensor nodes with EH require some form of energy storage, which enables systems to continue operating during periods of insufficient environmental energy. However, the size of the energy storage strongly restricts the use of WSNs with EH in real-world applications. A new approach will be presented, which enables computation to be sustained during intermittent power supply. The discussed approaches will be used for real-world WSN applications. The first presented scenario is related to the experience gathered during an European Project (3ENCULT Project), regarding the design and implementation of an innovative network for monitoring heritage buildings. The second scenario is related to the experience with Telecom Italia, regarding the design of smart energy meters for monitoring the usage of household's appliances.

Modelling and Design of Advanced Reliable Circuits and Devices for Energy Efficiency

Reliable electronic systems, namely a set of reliable electronic devices connected to each other and working correctly together for the same functionality, represent an essential ingredient for the large-scale commercial implementation of any technological advancement. Microelectronics technologies and new powerful integrated circuits provide noticeable improvements in performance and cost-effectiveness, and allow introducing electronic systems in increasingly diversified contexts. On the other hand, opening of new fields of application leads to new, unexplored reliability issues. The development of semiconductor device and electrical models (such as the well known SPICE models) able to describe the electrical behavior of devices and circuits, is a useful means to simulate and analyze the functionality of new electronic architectures and new technologies. Moreover, it represents an effective way to point out the reliability issues due to the employment of advanced electronic systems in new application contexts. In this thesis modeling and design of both advanced reliable circuits for general-purpose applications and devices for energy efficiency are considered. More in details, the following activities have been carried out: first, reliability issues in terms of security of standard communication protocols in wireless sensor networks are discussed. A new communication protocol is introduced, allows increasing the network security. Second, a novel scheme for the on-die measurement of either clock jitter or process parameter variations is proposed. The developed scheme can be used for an evaluation of both jitter and process parameter variations at low costs. Then, reliability issues in the field of “energy scavenging systems” have been analyzed. An accurate analysis and modeling of the effects of faults affecting circuit for energy harvesting from mechanical vibrations is performed. Finally, the problem of modeling the electrical and thermal behavior of photovoltaic (PV) cells under hot-spot condition is addressed with the development of an electrical and thermal model.

Studio della via di segnale PI3K/Akt/mTOR nelle Cellule Dendritiche

Il trapianto allogenico di cellule staminali emopoietiche è spesso l’unica soluzione per la cura di diverse malattie ematologiche. La aGVHD è la complicanza più importante che si può avere a seguito del trapianto allogenico ed è causata dai linfociti T del donatore che riconoscono gli antigeni del ricevente presentati dalle APC. Eliminare o inattivare la APC del ricevente prima del trapianto potrebbe prevenire la aGVHD. Ad oggi non esistono farmaci specifici diretti contro le APC, sono però noti i meccanismi molecolari coinvolti nella sopravvivenza cellulare come la via di segnale di PI3K. In questo lavoro abbiamo testato l’attività di due farmaci, che colpiscono target molecolari della via di PI3K, la rapamicina e la perifosina, sul differenziamento dei monociti a differenti popolazioni di cellule dendritiche (DC), in vitro. La rapamicina riduceva il recupero cellulare delle DC derivate da monociti coltivate in presenza di IL-4 aumentando l’apoptosi, mentre i monociti coltivati in presenza di GM-CSF con o senza IFN-α risultavano resistenti alla rapamicina. Inoltre la rapamicina riduceva l’espressione della molecola costimolatoria CD86 e incrementava l’espressione della molecola CD1a solo nei monociti coltivati con GM-CSF e IL-4. Nelle DC derivate dai monociti in presenza di IL-4 la rapamicina bloccava la produzione di IL-12 e TNF-α e ne alterava la capacità allostimolatoria. La rapamicina non alterava la sopravvivenza e la funzione delle DC circolanti. Il trattamento con perifosina provocava un incremento di apoptosi nei monociti coltivati sia con GM-CSF che con GM-CSF e IL-4. La perifosina bloccava la produzione di TNF-α nelle DC derivate da monociti coltivati nelle diverse condizioni. Questi risultati dimostrano che l’azione della rapamicina è strettamente dipendente dalla presenza dell’IL-4 nel terreno di coltura, in vitro, rispetto alla perifosina e suggeriscono un possibile ruolo della perifosina nella prevenzione della GVHD prima del trapianto allogenico di cellule staminali.

Design and experimental characterization of antennas and wireless systems for innovative wearable and implantable ultra low–power applications

The present PhD thesis exploits the design skills I have been improving since my master thesis’ research. A brief description of the chapters’ content follows. Chapter 1: the simulation of a complete front–end is a very complex problem and, in particular, is the basis upon which the prediction of the overall performance of the system is possible. By means of a commercial EM simulation tool and a rigorous nonlinear/EM circuit co–simulation based on the Reciprocity Theorem, the above–mentioned prediction can be achieved and exploited for wireless links characterization. This will represent the theoretical basics of the entire present thesis and will be supported by two RF applications. Chapter 2: an extensive dissertation about Magneto–Dielectric (MD) materials will be presented, together with their peculiar characteristics as substrates for antenna miniaturization purposes. A designed and tested device for RF on–body applications will be described in detail. Finally, future research will be discussed. Chapter 3: this chapter will deal with the issue regarding the exploitation of renewable energy sources for low–energy consumption devices. Hence the problem related to the so–called energy harvesting will be tackled and a first attempt to deploy THz solar energy in an innovative way will be presented and discussed. Future research will be proposed as well. Chapter 4: graphene is a very promising material for devices to be exploited in the RF and THz frequency range for a wide range of engineering applications, including those ones marked as the main research goal of the present thesis. This chapter will present the results obtained during my research period at the National Institute for Research and Development in Microtechnologies (IMT) in Bucharest, Romania. It will concern the design and manufacturing of antennas and diodes made in graphene–based technology for detection/rectification purposes.

La conclusione del contratto informatico nella contrattazione internazionale

Nel corso del presente studio si è cercato di capire quale potesse essere la normativa applicabile ai vari tipi di contratto elettronici analizzati, sia dal punto di vista del diverso modello contrattuale e sia dal punto di vista del soggetto, come parte del contratto. Infatti, proprio la peculiare logica delle norme poste a tutela del consumatore giustifica un separato approfondimento degli aspetti riguardanti i contratti conclusi tra operatori professionali, contratti business to business e quelli di cui sia parte un consumatore, contratti business to consumer. Sulla base di questi aspetti soggettivi e contrattuali, è stata analizzate la normativa comunitaria di riferimento, dal regolamento n. 44 del 2001 alla direttiva comunitaria 2000/31/CE. Si sono affrontati anche gli aspetti relativi alle norme di derivazione Uncitral, dalla Model Law del 1996 alla Convenzione del 2005 sulle comunicazioni elettroniche nella contrattazione internazionale, le norme di soft law, dalla Nuova lex mercatoria ai Principi Unidroit alle Linee Guida OCSE e la loro interazione con il commercio elettronico. In seguito, si è analizzata la convenzione di Roma sulle obbligazioni contrattuali e il regolamento Roma I, le loro differenze e la loro diretta applicabilità, se esiste, con il commercio elettronico. In particolare, il Regolamento Roma I ha, nella maggior parte delle sue disposizioni, riproposto quanto contenuto nella convenzione di Roma, però in chiave moderna, apportando delle innovazioni nel commercio elettronico internazionale.