Uniquitous internet middleware: architecture design and prototype evaluation

Technology advances in recent years have dramatically changed the way users exploit contents and services available on the Internet, by enforcing pervasive and mobile computing scenarios and enabling access to networked resources almost from everywhere, at anytime, and independently of the device in use. In addition, people increasingly require to customize their experience, by exploiting specific device capabilities and limitations, inherent features of the communication channel in use, and interaction paradigms that significantly differ from the traditional request/response one. So-called Ubiquitous Internet scenario calls for solutions that address many different challenges, such as device mobility, session management, content adaptation, context-awareness and the provisioning of multimodal interfaces. Moreover, new service opportunities demand simple and effective ways to integrate existing resources into new and value added applications, that can also undergo run-time modifications, according to ever-changing execution conditions. Despite service-oriented architectural models are gaining momentum to tame the increasing complexity of composing and orchestrating distributed and heterogeneous functionalities, existing solutions generally lack a unified approach and only provide support for specific Ubiquitous Internet aspects. Moreover, they usually target rather static scenarios and scarcely support the dynamic nature of pervasive access to Internet resources, that can make existing compositions soon become obsolete or inadequate, hence in need of reconfiguration. This thesis proposes a novel middleware approach to comprehensively deal with Ubiquitous Internet facets and assist in establishing innovative application scenarios. We claim that a truly viable ubiquity support infrastructure must neatly decouple distributed resources to integrate and push any kind of content-related logic outside its core layers, by keeping only management and coordination responsibilities. Furthermore, we promote an innovative, open, and dynamic resource composition model that allows to easily describe and enforce complex scenario requirements, and to suitably react to changes in the execution conditions.

Supramolecular hybrid organic-inorganic multicomponent architectures in solution and on surface

Supramolecular architectures can be built-up from a single molecular component (building block) to obtain a complex of organic or inorganic interactions creating a new emergent condensed phase of matter, such as gels, liquid crystals and solid crystal. Further the generation of multicomponent supramolecular hybrid architecture, a mix of organic and inorganic components, increases the complexity of the condensed aggregate with functional properties useful for important areas of research, like material science, medicine and nanotechnology. One may design a molecule storing a recognition pattern and programming a informed self-organization process enables to grow-up into a hierarchical architecture. From a molecular level to a supramolecular level, in a bottom-up fashion, it is possible to create a new emergent structure-function, where the system, as a whole, is open to its own environment to exchange energy, matter and information. “The emergent property of the whole assembly is superior to the sum of a singles parts”. In this thesis I present new architectures and functional materials built through the selfassembly of guanosine, in the absence or in the presence of a cation, in solution and on the surface. By appropriate manipulation of intermolecular non-covalent interactions the spatial (structural) and temporal (dynamic) features of these supramolecular architectures are controlled. Guanosine G7 (5',3'-di-decanoil-deoxi-guanosine) is able to interconvert reversibly between a supramolecular polymer and a discrete octameric species by dynamic cation binding and release. Guanosine G16 (2',3'-O-Isopropylidene-5'-O-decylguanosine) shows selectivity binding from a mix of different cation's nature. Remarkably, reversibility, selectivity, adaptability and serendipity are mutual features to appreciate the creativity of a molecular self-organization complex system into a multilevelscale hierarchical growth. The creativity - in general sense, the creation of a new thing, a new thinking, a new functionality or a new structure - emerges from a contamination process of different disciplines such as biology, chemistry, physics, architecture, design, philosophy and science of complexity.

Architectures and design patterns for functional design of logic control and diagnostics in industrial automation

Recently in most of the industrial automation process an ever increasing degree of automation has been observed. This increasing is motivated by the higher requirement of systems with great performance in terms of quality of products/services generated, productivity, efficiency and low costs in the design, realization and maintenance. This trend in the growth of complex automation systems is rapidly spreading over automated manufacturing systems (AMS), where the integration of the mechanical and electronic technology, typical of the Mechatronics, is merging with other technologies such as Informatics and the communication networks. An AMS is a very complex system that can be thought constituted by a set of flexible working stations, one or more transportation systems. To understand how this machine are important in our society let considerate that every day most of us use bottles of water or soda, buy product in box like food or cigarets and so on. Another important consideration from its complexity derive from the fact that the the consortium of machine producers has estimated around 350 types of manufacturing machine. A large number of manufacturing machine industry are presented in Italy and notably packaging machine industry,in particular a great concentration of this kind of industry is located in Bologna area; for this reason the Bologna area is called “packaging valley”. Usually, the various parts of the AMS interact among them in a concurrent and asynchronous way, and coordinate the parts of the machine to obtain a desiderated overall behaviour is an hard task. Often, this is the case in large scale systems, organized in a modular and distributed manner. Even if the success of a modern AMS from a functional and behavioural point of view is still to attribute to the design choices operated in the definition of the mechanical structure and electrical electronic architecture, the system that governs the control of the plant is becoming crucial, because of the large number of duties associated to it. Apart from the activity inherent to the automation of themachine cycles, the supervisory system is called to perform other main functions such as: emulating the behaviour of traditional mechanical members thus allowing a drastic constructive simplification of the machine and a crucial functional flexibility; dynamically adapting the control strategies according to the different productive needs and to the different operational scenarios; obtaining a high quality of the final product through the verification of the correctness of the processing; addressing the operator devoted to themachine to promptly and carefully take the actions devoted to establish or restore the optimal operating conditions; managing in real time information on diagnostics, as a support of the maintenance operations of the machine. The kind of facilities that designers can directly find on themarket, in terms of software component libraries provides in fact an adequate support as regard the implementation of either top-level or bottom-level functionalities, typically pertaining to the domains of user-friendly HMIs, closed-loop regulation and motion control, fieldbus-based interconnection of remote smart devices. What is still lacking is a reference framework comprising a comprehensive set of highly reusable logic control components that, focussing on the cross-cutting functionalities characterizing the automation domain, may help the designers in the process of modelling and structuring their applications according to the specific needs. Historically, the design and verification process for complex automated industrial systems is performed in empirical way, without a clear distinction between functional and technological-implementation concepts and without a systematic method to organically deal with the complete system. Traditionally, in the field of analog and digital control design and verification through formal and simulation tools have been adopted since a long time ago, at least for multivariable and/or nonlinear controllers for complex time-driven dynamics as in the fields of vehicles, aircrafts, robots, electric drives and complex power electronics equipments. Moving to the field of logic control, typical for industrial manufacturing automation, the design and verification process is approached in a completely different way, usually very “unstructured”. No clear distinction between functions and implementations, between functional architectures and technological architectures and platforms is considered. Probably this difference is due to the different “dynamical framework”of logic control with respect to analog/digital control. As a matter of facts, in logic control discrete-events dynamics replace time-driven dynamics; hence most of the formal and mathematical tools of analog/digital control cannot be directly migrated to logic control to enlighten the distinction between functions and implementations. In addition, in the common view of application technicians, logic control design is strictly connected to the adopted implementation technology (relays in the past, software nowadays), leading again to a deep confusion among functional view and technological view. In Industrial automation software engineering, concepts as modularity, encapsulation, composability and reusability are strongly emphasized and profitably realized in the so-calledobject-oriented methodologies. Industrial automation is receiving lately this approach, as testified by some IEC standards IEC 611313, IEC 61499 which have been considered in commercial products only recently. On the other hand, in the scientific and technical literature many contributions have been already proposed to establish a suitable modelling framework for industrial automation. During last years it was possible to note a considerable growth in the exploitation of innovative concepts and technologies from ICT world in industrial automation systems. For what concerns the logic control design, Model Based Design (MBD) is being imported in industrial automation from software engineering field. Another key-point in industrial automated systems is the growth of requirements in terms of availability, reliability and safety for technological systems. In other words, the control system should not only deal with the nominal behaviour, but should also deal with other important duties, such as diagnosis and faults isolations, recovery and safety management. Indeed, together with high performance, in complex systems fault occurrences increase. This is a consequence of the fact that, as it typically occurs in reliable mechatronic systems, in complex systems such as AMS, together with reliable mechanical elements, an increasing number of electronic devices are also present, that are more vulnerable by their own nature. The diagnosis problem and the faults isolation in a generic dynamical system consists in the design of an elaboration unit that, appropriately processing the inputs and outputs of the dynamical system, is also capable of detecting incipient faults on the plant devices, reconfiguring the control system so as to guarantee satisfactory performance. The designer should be able to formally verify the product, certifying that, in its final implementation, it will perform itsrequired function guarantying the desired level of reliability and safety; the next step is that of preventing faults and eventually reconfiguring the control system so that faults are tolerated. On this topic an important improvement to formal verification of logic control, fault diagnosis and fault tolerant control results derive from Discrete Event Systems theory. The aimof this work is to define a design pattern and a control architecture to help the designer of control logic in industrial automated systems. The work starts with a brief discussion on main characteristics and description of industrial automated systems on Chapter 1. In Chapter 2 a survey on the state of the software engineering paradigm applied to industrial automation is discussed. Chapter 3 presentes a architecture for industrial automated systems based on the new concept of Generalized Actuator showing its benefits, while in Chapter 4 this architecture is refined using a novel entity, the Generalized Device in order to have a better reusability and modularity of the control logic. In Chapter 5 a new approach will be present based on Discrete Event Systems for the problemof software formal verification and an active fault tolerant control architecture using online diagnostic. Finally conclusive remarks and some ideas on new directions to explore are given. In Appendix A are briefly reported some concepts and results about Discrete Event Systems which should help the reader in understanding some crucial points in chapter 5; while in Appendix B an overview on the experimental testbed of the Laboratory of Automation of University of Bologna, is reported to validated the approach presented in chapter 3, chapter 4 and chapter 5. In Appendix C some components model used in chapter 5 for formal verification are reported.

An architecture for scaling ontology networks

Constructing ontology networks typically occurs at design time at the hands of knowledge engineers who assemble their components statically. There are, however, use cases where ontology networks need to be assembled upon request and processed at runtime, without altering the stored ontologies and without tampering with one another. These are what we call "virtual [ontology] networks", and keeping track of how an ontology changes in each virtual network is called "multiplexing". Issues may arise from the connectivity of ontology networks. In many cases, simple flat import schemes will not work, because many ontology managers can cause property assertions to be erroneously interpreted as annotations and ignored by reasoners. Also, multiple virtual networks should optimize their cumulative memory footprint, and where they cannot, this should occur for very limited periods of time. We claim that these problems should be handled by the software that serves these ontology networks, rather than by ontology engineering methodologies. We propose a method that spreads multiple virtual networks across a 3-tier structure, and can reduce the amount of erroneously interpreted axioms, under certain raw statement distributions across the ontologies. We assumed OWL as the core language handled by semantic applications in the framework at hand, due to the greater availability of reasoners and rule engines. We also verified that, in common OWL ontology management software, OWL axiom interpretation occurs in the worst case scenario of pre-order visit. To measure the effectiveness and space-efficiency of our solution, a Java and RESTful implementation was produced within an Apache project. We verified that a 3-tier structure can accommodate reasonably complex ontology networks better, in terms of the expressivity OWL axiom interpretation, than flat-tree import schemes can. We measured both the memory overhead of the additional components we put on top of traditional ontology networks, and the framework's caching capabilities.

Leonardo Ricci in the United States (1952-1972). A twenty-year American transfer as a turning experience in teaching and design.

The research solved the historiographic lacuna about Leonardo Ricci’s work in the United States focusing on the span 1952-1972 as a fundamental period for the architect's research, which moved from the project for the community space to macrostructures. The considered period is comprised between Ricci’s first travel to the United States and the date of his resignation from the University of Florida, one year before his resignation from the deanship of the faculty of architecture of Florence (1973). The research retraced philologically the stages of Ricci’s activity in the U.S.A. unveiling the premises and results of his American transfer, and to what extent it marked a turning period for his work as educator and designer and for the wider historiographic contest of the Sixties. The American transfer helped him grounding his belief in avoiding a priori morphological results in favor of what he called the “form-act” design method. Ricci’s research in the U.S.A. is described in his books Anonymous (XX century) and City of the Earth (unpublished). In them and in Ricci’s projects one common thread is traceable: the application of the “form-act” as the best tool to conceive urban design, a discipline established in the United States during Ricci’s first stay at M.I.T., in which he encountered the balance point between architecture and urban planning, between the architect’s sign and his being anonymous, between the collective and the individual dimension. With the notions of “anonymous architecture” and “form-act”, Urban Design and “open work” are the key words to understand Ricci’s work in the United States and in Italy. Urban design’s main goal to design the city as a collective work of art was the solution of that dychothomous research that enlivened Ricci’s work and one possible answer to that tension useful for him to seek the truth of architecture.

A communication infrastructure to support knowledge level agents on the web

Agent Communication Languages (ACLs) have been developed to provide a way for agents to communicate with each other supporting cooperation in Multi-Agent Systems. In the past few years many ACLs have been proposed for Multi-Agent Systems, such as KQML and FIPA-ACL. The goal of these languages is to support high-level, human like communication among agents, exploiting Knowledge Level features rather than symbol level ones. Adopting these ACLs, and mainly the FIPA-ACL specifications, many agent platforms and prototypes have been developed. Despite these efforts, an important issue in the research on ACLs is still open and concerns how these languages should deal (at the Knowledge Level) with possible failures of agents. Indeed, the notion of Knowledge Level cannot be straightforwardly extended to a distributed framework such as MASs, because problems concerning communication and concurrency may arise when several Knowledge Level agents interact (for example deadlock or starvation). The main contribution of this Thesis is the design and the implementation of NOWHERE, a platform to support Knowledge Level Agents on the Web. NOWHERE exploits an advanced Agent Communication Language, FT-ACL, which provides high-level fault-tolerant communication primitives and satisfies a set of well defined Knowledge Level programming requirements. NOWHERE is well integrated with current technologies, for example providing full integration for Web services. Supporting different middleware used to send messages, it can be adapted to various scenarios. In this Thesis we present the design and the implementation of the architecture, together with a discussion of the most interesting details and a comparison with other emerging agent platforms. We also present several case studies where we discuss the benefits of programming agents using the NOWHERE architecture, comparing the results with other solutions. Finally, the complete source code of the basic examples can be found in appendix.

Design and control techniques of optical networks

The world of communication has changed quickly in the last decade resulting in the the rapid increase in the pace of peoples’ lives. This is due to the explosion of mobile communication and the internet which has now reached all levels of society. With such pressure for access to communication there is increased demand for bandwidth. Photonic technology is the right solution for high speed networks that have to supply wide bandwidth to new communication service providers. In particular this Ph.D. dissertation deals with DWDM optical packet-switched networks. The issue introduces a huge quantity of problems from physical layer up to transport layer. Here this subject is tackled from the network level perspective. The long term solution represented by optical packet switching has been fully explored in this years together with the Network Research Group at the department of Electronics, Computer Science and System of the University of Bologna. Some national as well as international projects supported this research like the Network of Excellence (NoE) e-Photon/ONe, funded by the European Commission in the Sixth Framework Programme and INTREPIDO project (End-to-end Traffic Engineering and Protection for IP over DWDM Optical Networks) funded by the Italian Ministry of Education, University and Scientific Research. Optical packet switching for DWDM networks is studied at single node level as well as at network level. In particular the techniques discussed are thought to be implemented for a long-haul transport network that connects local and metropolitan networks around the world. The main issues faced are contention resolution in a asynchronous variable packet length environment, adaptive routing, wavelength conversion and node architecture. Characteristics that a network must assure as quality of service and resilience are also explored at both node and network level. Results are mainly evaluated via simulation and through analysis.

Reduced-order modelling, circuit-level design and SOI fabrication of microelectromechanical resonators

This thesis deals with two important research aspects concerning radio frequency (RF) microresonators and switches. First, a new approach for compact modeling and simulation of these devices is presented. Then, a combined process flow for their simultaneous fabrication on a SOI substrate is proposed. Compact models for microresonators and switches are extracted by applying mathematical model order reduction (MOR) to the devices finite element (FE) description in ANSYS c° . The behaviour of these devices includes forms of nonlinearities. However, an approximation in the creation of the FE model is introduced, which enables the use of linear model order reduction. Microresonators are modeled with the introduction of transducer elements, which allow for direct coupling of the electrical and mechanical domain. The coupled system element matrices are linearized around an operating point and reduced. The resulting macromodel is valid for small signal analysis around the bias point, such as harmonic pre-stressed analysis. This is extremely useful for characterizing the frequency response of resonators. Compact modelling of switches preserves the nonlinearity of the device behaviour. Nonlinear reduced order models are obtained by reducing the number of nonlinearities in the system and handling them as input to the system. In this way, the system can be reduced using linear MOR techniques and nonlinearities are introduced directly in the reduced order model. The reduction of the number of system nonlinearities implies the approximation of all distributed forces in the model with lumped forces. Both for microresonators and switches, a procedure for matrices extraction has been developed so that reduced order models include the effects of electrical and mechanical pre-stress. The extraction process is fast and can be done automatically from ANSYS binary files. The method has been applied for the simulation of several devices both at devices and circuit level. Simulation results have been compared with full model simulations, and, when available, experimental data. Reduced order models have proven to conserve the accuracy of finite element method and to give a good description of the overall device behaviour, despite the introduced approximations. In addition, simulation is very fast, both at device and circuit level. A combined process-flow for the integrated fabrication of microresonators and switches has been defined. For this purpose, two processes that are optimized for the independent fabrication of these devices are merged. The major advantage of this process is the possibility to create on-chip circuit blocks that include both microresonators and switches. An application is, for example, aswitched filter bank for wireless transceiver. The process for microresonators fabrication is characterized by the use of silicon on insulator (SOI) wafers and on a deep reactive ion etching (DRIE) step for the creation of the vibrating structures in single-crystal silicon and the use of a sacrificial oxide layer for the definition of resonator to electrode distance. The fabrication of switches is characterized by the use of two different conductive layers for the definition of the actuation electrodes and by the use of a photoresist as a sacrificial layer for the creation of the suspended structure. Both processes have a gold electroplating step, for the creation of the resonators electrodes, transmission lines and suspended structures. The combined process flow is designed such that it conserves the basic properties of the original processes. Neither the performance of the resonators nor the performance of the switches results affected by the simultaneous fabrication. Moreover, common fabrication steps are shared, which allows for cheaper and faster fabrication.

Meta-models, environment and layers: agent-oriented engineering of complex systems

Traditional software engineering approaches and metaphors fall short when applied to areas of growing relevance such as electronic commerce, enterprise resource planning, and mobile computing: such areas, in fact, generally call for open architectures that may evolve dynamically over time so as to accommodate new components and meet new requirements. This is probably one of the main reasons that the agent metaphor and the agent-oriented paradigm are gaining momentum in these areas. This thesis deals with the engineering of complex software systems in terms of the agent paradigm. This paradigm is based on the notions of agent and systems of interacting agents as fundamental abstractions for designing, developing and managing at runtime typically distributed software systems. However, today the engineer often works with technologies that do not support the abstractions used in the design of the systems. For this reason the research on methodologies becomes the basic point in the scientific activity. Currently most agent-oriented methodologies are supported by small teams of academic researchers, and as a result, most of them are in an early stage and still in the first context of mostly \academic" approaches for agent-oriented systems development. Moreover, such methodologies are not well documented and very often defined and presented only by focusing on specific aspects of the methodology. The role played by meta- models becomes fundamental for comparing and evaluating the methodologies. In fact a meta-model specifies the concepts, rules and relationships used to define methodologies. Although it is possible to describe a methodology without an explicit meta-model, formalising the underpinning ideas of the methodology in question is valuable when checking its consistency or planning extensions or modifications. A good meta-model must address all the different aspects of a methodology, i.e. the process to be followed, the work products to be generated and those responsible for making all this happen. In turn, specifying the work products that must be developed implies dening the basic modelling building blocks from which they are built. As a building block, the agent abstraction alone is not enough to fully model all the aspects related to multi-agent systems in a natural way. In particular, different perspectives exist on the role that environment plays within agent systems: however, it is clear at least that all non-agent elements of a multi-agent system are typically considered to be part of the multi-agent system environment. The key role of environment as a first-class abstraction in the engineering of multi-agent system is today generally acknowledged in the multi-agent system community, so environment should be explicitly accounted for in the engineering of multi-agent system, working as a new design dimension for agent-oriented methodologies. At least two main ingredients shape the environment: environment abstractions - entities of the environment encapsulating some functions -, and topology abstractions - entities of environment that represent the (either logical or physical) spatial structure. In addition, the engineering of non-trivial multi-agent systems requires principles and mechanisms for supporting the management of the system representation complexity. These principles lead to the adoption of a multi-layered description, which could be used by designers to provide different levels of abstraction over multi-agent systems. The research in these fields has lead to the formulation of a new version of the SODA methodology where environment abstractions and layering principles are exploited for en- gineering multi-agent systems.

Design of optical networks for advanced applications

Nowadays, computing is migrating from traditional high performance and distributed computing to pervasive and utility computing based on heterogeneous networks and clients. The current trend suggests that future IT services will rely on distributed resources and on fast communication of heterogeneous contents. The success of this new range of services is directly linked to the effectiveness of the infrastructure in delivering them. The communication infrastructure will be the aggregation of different technologies even though the current trend suggests the emergence of single IP based transport service. Optical networking is a key technology to answer the increasing requests for dynamic bandwidth allocation and configure multiple topologies over the same physical layer infrastructure, optical networks today are still “far” from accessible from directly configure and offer network services and need to be enriched with more “user oriented” functionalities. However, current Control Plane architectures only facilitate efficient end-to-end connectivity provisioning and certainly cannot meet future network service requirements, e.g. the coordinated control of resources. The overall objective of this work is to provide the network with the improved usability and accessibility of the services provided by the Optical Network. More precisely, the definition of a service-oriented architecture is the enable technology to allow user applications to gain benefit of advanced services over an underlying dynamic optical layer. The definition of a service oriented networking architecture based on advanced optical network technologies facilitates users and applications access to abstracted levels of information regarding offered advanced network services. This thesis faces the problem to define a Service Oriented Architecture and its relevant building blocks, protocols and languages. In particular, this work has been focused on the use of the SIP protocol as a inter-layers signalling protocol which defines the Session Plane in conjunction with the Network Resource Description language. On the other hand, an advantage optical network must accommodate high data bandwidth with different granularities. Currently, two main technologies are emerging promoting the development of the future optical transport network, Optical Burst and Packet Switching. Both technologies respectively promise to provide all optical burst or packet switching instead of the current circuit switching. However, the electronic domain is still present in the scheduler forwarding and routing decision. Because of the high optics transmission frequency the burst or packet scheduler faces a difficult challenge, consequentially, high performance and time focused design of both memory and forwarding logic is need. This open issue has been faced in this thesis proposing an high efficiently implementation of burst and packet scheduler. The main novelty of the proposed implementation is that the scheduling problem has turned into simple calculation of a min/max function and the function complexity is almost independent of on the traffic conditions.

L'eredità di Aldo Rossi nella Penisola Iberica. La costruzione della città e il progetto contemporaneo

Descrizione, tema e obiettivi della ricerca La ricerca si propone lo studio delle possibili influenze che la teoria di Aldo Rossi ha avuto sulla pratica progettuale nella Penisola Iberica, intende quindi affrontare i caratteri fondamentali della teoria che sta alla base di un metodo progettuale ed in particolar modo porre l'attenzione alle nuove costruzioni quando queste si confrontano con le città storiche. Ha come oggetto principale lo studio dei documenti, saggi e scritti riguardanti il tema della costruzione all'interno delle città storiche. Dallo studio di testi selezionati di Aldo Rossi sulla città si vuole concentrare l'attenzione sull'influenza che tale teoria ha avuto nei progetti della Penisola Iberica, studiare come è stata recepita e trasmessa successivamente, attraverso gli scritti di autori spagnoli e come ha visto un suo concretizzarsi poi nei progetti di nuove costruzioni all'interno delle città storiche. Si intende restringere il campo su un periodo ed un luogo precisi, Spagna e Portogallo a partire dagli anni Settanta, tramite la lettura di un importante evento che ha ufficializzato il contatto dell'architetto italiano con la Penisola Iberica, quale il Seminario di Santiago de Compostela tenutosi nel 1976. Al Seminario parteciparono numerosi architetti che si confrontarono su di un progetto per la città di Santiago e furono invitati personaggi di fama internazionale a tenere lezioni introduttive sul tema di dibattito in merito al progetto e alla città storica. Il Seminario di Santiago si colloca in un periodo storico cruciale per la Penisola Iberica, nel 1974 cade il regime salazarista in Portogallo e nel 1975 cade il regime franchista in Spagna ed è quindi di rilevante importanza capire il legame tra l'architettura e la nuova situazione politica. Dallo studio degli interventi, dei progetti che furono prodotti durante il Seminario, della relazione tra questo evento ed il periodo storico in cui esso va contestualizzato, si intende giungere alla individuazione delle tracce della reale presenza di tale eredità. Presupposti metodologici. Percorso e strumenti di ricerca La ricerca può quindi essere articolata in distinte fasi corrispondenti per lo più ai capitoli in cui si articola la tesi: una prima fase con carattere prevalentemente storica, di ricerca del materiale per poter definire il contesto in cui si sviluppano poi le vicende oggetto della tesi; una seconda fase di impronta teorica, ossia di ricerca bibliografica del materiale e delle testimonianze che provvedono alla definizione della reale presenza di effetti scaturiti dai contatti tra Rossi e la Penisola Iberica, per andare a costruire una eredità ; una terza fase che entra nel merito della composizione attraverso lo studio e la verifica delle prime due parti, tramite l'analisi grafica applicata ad uno specifico esempio architettonico selezionato; una quarta fase dove il punto di vista viene ribaltato e si indaga l'influenza dei luoghi visitati e dei contatti intrattenuti con alcuni personaggi della Penisola Iberica sull'architettura di Rossi, ricercandone i riferimenti. La ricerca è stata condotta attraverso lo studio di alcuni eventi selezionati nel corso degli anni che si sono mostrati significativi per l'indagine, per la risonanza che hanno avuto sulla storia dell'architettura della Penisola. A questo scopo si sono utilizzati principalmente tre strumenti: lo studio dei documenti, le pubblicazioni e le riviste prodotte in Spagna, gli scritti di Aldo Rossi in merito, e la testimonianza diretta attraverso interviste di personaggi chiave. La ricerca ha prodotto un testo suddiviso per capitoli che rispetta l'organizzazione in fasi di lavoro. A seguito di determinate condizioni storiche e politiche, studiate nella ricerca a supporto della tesi espressa, nella Penisola Iberica si è verificato il diffondersi della necessità e del desiderio di guardare e prendere a riferimento l'architettura europea e in particolar modo quella italiana. Il periodo sul quale viene focalizzata l'attenzione ha inizio negli anni Sessanta, gli ultimi prima della caduta delle dittature, scenario dei primi viaggi di Aldo Rossi nella Penisola Iberica. Questi primi contatti pongono le basi per intense e significative relazioni future. Attraverso l'approfondimento e la studio dei materiali relativi all'oggetto della tesi, si è cercato di mettere in luce il contesto culturale, l'attenzione e l'interesse per l'apertura di un dibattito intorno all'architettura, non solo a livello nazionale, ma europeo. Ciò ha evidenziato il desiderio di innescare un meccanismo di discussione e scambio di idee, facendo leva sull'importanza dello sviluppo e ricerca di una base teorica comune che rende coerente i lavori prodotti nel panorama architettonico iberico, seppur ottenendo risultati che si differenziano gli uni dagli altri. E' emerso un forte interesse per il discorso teorico sull'architettura, trasmissibile e comunicabile, che diventa punto di partenza per un metodo progettuale. Ciò ha reso palese una condivisione di intenti e l'assunzione della teoria di Aldo Rossi, acquisita, diffusa e discussa, attraverso la pubblicazione dei suoi saggi, la conoscenza diretta con l'architetto e la sua architettura, conferenze, seminari, come base teorica su cui fondare il proprio sapere architettonico ed il processo metodologico progettuale da applicare di volta in volta negli interventi concreti. Si è giunti così alla definizione di determinati eventi che hanno permesso di entrare nel profondo della questione e di sondare la relazione tra Rossi e la Penisola Iberica, il materiale fornito dallo studio di tali episodi, quali il I SIAC, la diffusione della rivista "2C. Construccion de la Ciudad", la Coleccion Arquitectura y Critica di Gustavo Gili, hanno poi dato impulso per il reperimento di una rete di ulteriori riferimenti. E' stato possibile quindi individuare un gruppo di architetti spagnoli, che si identificano come allievi del maestro Rossi, impegnato per altro in quegli anni nella formazione di una Scuola e di un insegnamento, che non viene recepito tanto nelle forme, piuttosto nei contenuti. I punti su cui si fondano le connessioni tra l'analisi urbana e il progetto architettonico si centrano attorno due temi di base che riprendono la teoria esposta da Rossi nel saggio L'architettura della città : - relazione tra l'area-studio e la città nella sua globalità, - relazione tra la tipologia edificatoria e gli aspetti morfologici. La ricerca presentata ha visto nelle sue successive fasi di approfondimento, come si è detto, lo sviluppo parallelo di più tematiche. Nell'affrontare ciascuna fase è stato necessario, di volta in volta, operare una verifica delle tappe percorse precedentemente, per mantenere costante il filo del discorso col lavoro svolto e ritrovare, durante lo svolgimento stesso della ricerca, gli elementi di connessione tra i diversi episodi analizzati. Tale operazione ha messo in luce talvolta nodi della ricerca rimasti in sospeso che richiedevano un ulteriore approfondimento o talvolta solo una rivisitazione per renderne possibile un più proficuo collegamento con la rete di informazioni accumulate. La ricerca ha percorso strade diverse che corrono parallele, per quanto riguarda il periodo preso in analisi: - i testi sulla storia dell'architettura spagnola e la situazione contestuale agli anni Settanta - il materiale riguardante il I SIAC - le interviste ai partecipanti al I SIAC - le traduzioni di Gustavo Gili nella Coleccion Arquitectura y Critica - la rivista "2C. Construccion de la Ciudad" Esse hanno portato alla luce una notevole quantità di tematiche, attraverso le quali, queste strade vengono ad intrecciarsi e a coincidere, verificando l'una la veridicità dell'altra e rafforzandone il valore delle affermazioni. Esposizione sintetica dei principali contenuti esposti dalla ricerca Andiamo ora a vedere brevemente i contenuti dei singoli capitoli. Nel primo capitolo Anni Settanta. Periodo di transizione per la Penisola Iberica si è cercato di dare un contesto storico agli eventi studiati successivamente, andando ad evidenziare gli elementi chiave che permettono di rintracciare la presenza della predisposizione ad un cambiamento culturale. La fase di passaggio da una condizione di chiusura rispetto alle contaminazioni provenienti dall'esterno, che caratterizza Spagna e Portogallo negli anni Sessanta, lascia il posto ad un graduale abbandono della situazione di isolamento venutasi a creare intorno al Paese a causa del regime dittatoriale, fino a giungere all'apertura e all'interesse nei confronti degli apporti culturali esterni. E' in questo contesto che si gettano le basi per la realizzazione del I Seminario Internazionale di Architettura Contemporanea a Santiago de Compostela, del 1976, diretto da Aldo Rossi e organizzato da César Portela e Salvador Tarragó, di cui tratta il capitolo secondo. Questo è uno degli eventi rintracciati nella storia delle relazioni tra Rossi e la Penisola Iberica, attraverso il quale è stato possibile constatare la presenza di uno scambio culturale e l'importazione in Spagna delle teorie di Aldo Rossi. Organizzato all'indomani della caduta del franchismo, ne conserva una reminescenza formale. Il capitolo è organizzato in tre parti, la prima si occupa della ricostruzione dei momenti salienti del Seminario Proyecto y ciudad historica, dagli interventi di architetti di fama internazionale, quali lo stesso Aldo Rossi, Carlo Aymonino, James Stirling, Oswald Mathias Ungers e molti altri, che si confrontano sul tema delle città storiche, alle giornate seminariali dedicate all’elaborazione di un progetto per cinque aree individuate all’interno di Santiago de Compostela e quindi dell’applicazione alla pratica progettuale dell’inscindibile base teorica esposta. Segue la seconda parte dello stesso capitolo riguardante La selezione di interviste ai partecipanti al Seminario. Esso contiene la raccolta dei colloqui avuti con alcuni dei personaggi che presero parte al Seminario e attraverso le loro parole si è cercato di approfondire la materia, in particolar modo andando ad evidenziare l’ambiente culturale in cui nacque l’idea del Seminario, il ruolo avuto nella diffusione della teoria di Aldo Rossi in Spagna e la ripercussione che ebbe nella pratica costruttiva. Le diverse interviste, seppur rivolte a persone che oggi vivono in contesti distanti e che in seguito a questa esperienza collettiva hanno intrapreso strade diverse, hanno fatto emergere aspetti comuni, tale unanimità ha dato ancor più importanza al valore di testimonianza offerta. L’elemento che risulta più evidente è il lascito teorico, di molto prevalente rispetto a quello progettuale che si è andato mescolando di volta in volta con la tradizione e l’esperienza dei cosiddetti allievi di Aldo Rossi. Negli stessi anni comincia a farsi strada l’importanza del confronto e del dibattito circa i temi architettonici e nel capitolo La fortuna critica della teoria di Aldo Rossi nella Penisola Iberica è stato affrontato proprio questo rinnovato interesse per la teoria che in quegli anni si stava diffondendo. Si è portato avanti lo studio delle pubblicazioni di Gustavo Gili nella Coleccion Arquitectura y Critica che, a partire dalla fine degli anni Sessanta, pubblica e traduce in lingua spagnola i più importanti saggi di architettura, tra i quali La arquitectura de la ciudad di Aldo Rossi, nel 1971, e Comlejidad y contradiccion en arquitectura di Robert Venturi nel 1972. Entrambi fondamentali per il modo di affrontare determinate tematiche di cui sempre più in quegli anni si stava interessando la cultura architettonica iberica, diventando così ¬ testi di riferimento anche nelle scuole. Le tracce dell’influenza di Rossi sulla Penisola Iberica si sono poi ricercate nella rivista “2C. Construccion de la Ciudad” individuata come strumento di espressione di una teoria condivisa. Con la nascita nel 1972 a Barcellona di questa rivista viene portato avanti l’impegno di promuovere la Tendenza, facendo riferimento all’opera e alle idee di Rossi ed altri architetti europei, mirando inoltre al recupero di un ruolo privilegiato dell’architettura catalana. A questo proposito sono emersi due fondamentali aspetti che hanno legittimato l’indagine e lo studio di questa fonte: - la diffusione della cultura architettonica, il controllo ideologico e di informazione operato dal lavoro compiuto dalla rivista; - la documentazione circa i criteri di scelta della redazione a proposito del materiale pubblicato. E’ infatti attraverso le pubblicazioni di “2C. Construccion de la Ciudad” che è stato possibile il ritrovamento delle notizie sulla mostra Arquitectura y razionalismo. Aldo Rossi + 21 arquitectos españoles, che accomuna in un’unica esposizione le opere del maestro e di ventuno giovani allievi che hanno recepito e condiviso la teoria espressa ne “L’architettura della città”. Tale mostra viene poi riproposta nella Sezione Internazionale di Architettura della XV Triennale di Milano, la quale dedica un Padiglione col titolo Barcelona, tres epocas tres propuestas. Dalla disamina dei progetti presentati è emerso un interessante caso di confronto tra le Viviendas para gitanos di César Portela e la Casa Bay di Borgo Ticino di Aldo Rossi, di cui si è occupato l’ultimo paragrafo di questo capitolo. Nel corso degli studi è poi emerso un interessante risvolto della ricerca che, capovolgendone l’oggetto stesso, ne ha approfondito gli aspetti cercando di scavare più in profondità nell’analisi della reciproca influenza tra la cultura iberica e Aldo Rossi, questa parte, sviscerata nell’ultimo capitolo, La Penisola Iberica nel “magazzino della memoria” di Aldo Rossi, ha preso il posto di quello che inizialmente doveva presentarsi come il risvolto progettuale della tesi. Era previsto infatti, al termine dello studio dell’influenza di Aldo Rossi sulla Penisola Iberica, un capitolo che concentrava l’attenzione sulla produzione progettuale. A seguito dell’emergere di un’influenza di carattere prettamente teorica, che ha sicuramente modificato la pratica dal punto di vista delle scelte architettoniche, senza però rendersi esplicita dal punto di vista formale, si è preferito, anche per la difficoltà di individuare un solo esempio rappresentativo di quanto espresso, sostituire quest’ultima parte con lo studio dell’altra faccia della medaglia, ossia l’importanza che a sua volta ha avuto la cultura iberica nella formazione della collezione dei riferimenti di Aldo Rossi. L’articolarsi della tesi in fasi distinte, strettamente connesse tra loro da un filo conduttore, ha reso necessari successivi aggiustamenti nel percorso intrapreso, dettati dall’emergere durante la ricerca di nuovi elementi di indagine. Si è pertanto resa esplicita la ricercata eredità di Aldo Rossi, configurandosi però prevalentemente come un’influenza teorica che ha preso le sfumature del contesto e dell’esperienza personale di chi se ne è fatto ricevente, diventandone così un continuatore attraverso il proprio percorso autonomo o collettivo intrapreso in seguito. Come suggerisce José Charters Monteiro, l’eredità di Rossi può essere letta attraverso tre aspetti su cui si basa la sua lezione: la biografia, la teoria dell’architettura, l’opera. In particolar modo per quanto riguarda la Penisola Iberica si può parlare dell’individuazione di un insegnamento riferito alla seconda categoria, i suoi libri di testo, le sue partecipazioni, le traduzioni. Questo è un lascito che rende possibile la continuazione di un dibattito in merito ai temi della teoria dell’architettura, della sue finalità e delle concrete applicazioni nelle opere, che ha permesso il verificarsi di una apertura mentale che mette in relazione l’architettura con altre discipline umanistiche e scientifiche, dalla politica, alla sociologia, comprendendo l’arte, le città la morfologia, la topografia, mediate e messe in relazione proprio attraverso l’architettura.

Il concetto di sezione nel metodo compositivo di Aldo Rossi.

Purpose of this research is to deepen the study on the section in architecture. The survey aims as important elements in the project Teatro Domestico by Aldo Rossi built for the XVII Triennale di Milano in 1986 and, through the implementation on several topics of architecture, verify the timeliness and fertility in the new compositional exercises. Through the study of certain areas of the Rossi’s theory we tried to find a common thread for the reading of the theater project. The theater is the place of the ephemeral and the artificial, which is why his destiny is the end and the fatal loss. The design and construction of theater setting has always had a double meaning between the value of civil architecture and testing of new technologies available. Rossi's experience in this area are clear examples of the inseparable relationship between the representation of architecture as art and design of architecture as a model of reality. In the Teatro Domestico, the distinction between representation and the real world is constantly canceled and returned through the reversal of the meaning and through the skip of scale. At present, studies conducted on the work of Rossi concern the report that the architectural composition is the theory of form, focusing compositional development of a manufacturing process between the typological analysis and form invention. The research, through the analysis of some projects few designs, will try to analyze this issue through the rules of composition both graphical and concrete construction, hoping to decipher the mechanism underlying the invention. The almost total lack of published material on the project Teatro Domestico and the opportunity to visit the archives that preserve the drawings, has allowed the author of this study to deepen the internal issues in the project, thus placing this search as a first step toward possible further analysis on the works of Rossi linked to performance world. The final aim is therefore to produce material that can best describe the work of Rossi. Through the reading of the material published by the same author and the vision of unpublished material preserved in the archives, it was possible to develop new material and increasing knowledge about the work, otherwise difficult to analyze. The research is divided into two groups. The first, taking into account the close relationship most frequently mentioned by Rossi himself between archeology and architectural composition, stresses the importance of tipo such as urban composition reading system as well as open tool of invention. Resuming Ezio Bonfanti’s essay on the work of the architect we wanted to investigate how the paratactic method is applied to the early work conceived and, subsequently as the process reaches a complexity accentuated, while keeping stable the basic terms. Following a brief introduction related to the concept of the section and the different interpretations that over time the term had, we tried to identify with this facility a methodology for reading Rossi’s projects. The result is a constant typological interpretation of the term, not only related to the composition in plant but also through the elevation plans. The section is therefore intended as the overturning of such elevation is marked on the same plane of the terms used, there is a different approach, but a similarity of characters. The identification of architectural phonemes allows comparison with other arts. The research goes in the direction of language trying to identify the relationship between representation and construction, between the ephemeral and the real world. In this sense it will highlight the similarities between the graphic material produced by Ross and some important examples of contemporary author. The comparison between the composition system with the surrealist world of painting and literature will facilitate the understanding and identification of possible rules applied by Rossi. The second part of the research is characterized by a focus on the intent of the project chosen. Teatro Domestico embodies a number of elements that seem to conclude (assuming an end point but also to start) a curriculum author. With it, the experiments carried out on the theater started with the project for the Teatrino Scientifico (1978) through the project for the Teatro del Mondo (1979), into a Laic Tabernacle representative collective and private memory of the city. Starting from a reading of the draft, through the collection of published material, we’ve made an analysis on the explicit themes of the work, finding the conceptual references. Following the taking view of the original materials not published kept at Aldo Rossi's Archive Collection of the Canadian Center for Architecture in Montréal, will be implemented through the existing techniques for digital representation, a virtual reconstruction of the project, adding little to the material, a new element for future studies. The reconstruction is part of a larger research studies where the current technologies of composition and representation in architecture stand side by side with research on the method of composition of this architect. The results achieved are in addition to experiences in the past dealt with the reconstruction of some of the lost works of Aldo Rossi. A partial objective is to reactivate a discourse around this work is considered non-principal, among others born in the prolific activities. Reassessment of development projects which would bring the level of ephemeral works most frequented by giving them the value earned. In conclusion, the research aims to open a new field of interest on the part not only as a technical instrument of representation of an idea but as an actual mechanism through which composition is formed and the idea is developed.

Architectures for Context Aware Services in Smart Environments

This thesis deals with Context Aware Services, Smart Environments, Context Management and solutions for Devices and Service Interoperability. Multi-vendor devices offer an increasing number of services and end-user applications that base their value on the ability to exploit the information originating from the surrounding environment by means of an increasing number of embedded sensors, e.g. GPS, compass, RFID readers, cameras and so on. However, usually such devices are not able to exchange information because of the lack of a shared data storage and common information exchange methods. A large number of standards and domain specific building blocks are available and are heavily used in today's products. However, the use of these solutions based on ready-to-use modules is not without problems. The integration and cooperation of different kinds of modules can be daunting because of growing complexity and dependency. In this scenarios it might be interesting to have an infrastructure that makes the coexistence of multi-vendor devices easy, while enabling low cost development and smooth access to services. This sort of technologies glue should reduce both software and hardware integration costs by removing the trouble of interoperability. The result should also lead to faster and simplified design, development and, deployment of cross-domain applications. This thesis is mainly focused on SW architectures supporting context aware service providers especially on the following subjects: - user preferences service adaptation - context management - content management - information interoperability - multivendor device interoperability - communication and connectivity interoperability Experimental activities were carried out in several domains including Cultural Heritage, indoor and personal smart spaces – all of which are considered significant test-beds in Context Aware Computing. The work evolved within european and national projects: on the europen side, I carried out my research activity within EPOCH, the FP6 Network of Excellence on “Processing Open Cultural Heritage” and within SOFIA, a project of the ARTEMIS JU on embedded systems. I worked in cooperation with several international establishments, including the University of Kent, VTT (the Technical Reserarch Center of Finland) and Eurotech. On the national side I contributed to a one-to-one research contract between ARCES and Telecom Italia. The first part of the thesis is focused on problem statement and related work and addresses interoperability issues and related architecture components. The second part is focused on specific architectures and frameworks: - MobiComp: a context management framework that I used in cultural heritage applications - CAB: a context, preference and profile based application broker which I designed within EPOCH Network of Excellence - M3: "Semantic Web based" information sharing infrastructure for smart spaces designed by Nokia within the European project SOFIA - NoTa: a service and transport independent connectivity framework - OSGi: the well known Java based service support framework The final section is dedicated to the middleware, the tools and, the SW agents developed during my Doctorate time to support context-aware services in smart environments.

Nonlinear / electromagnetic co-simulation and co-design of microwave links in highly polluted and / or strongly inhomogeneous environments

The objective of the Ph.D. thesis is to put the basis of an all-embracing link analysis procedure that may form a general reference scheme for the future state-of-the-art of RF/microwave link design: it is basically meant as a circuit-level simulation of an entire radio link, with – generally multiple – transmitting and receiving antennas examined by EM analysis. In this way the influence of mutual couplings on the frequency-dependent near-field and far-field performance of each element is fully accounted for. The set of transmitters is treated as a unique nonlinear system loaded by the multiport antenna, and is analyzed by nonlinear circuit techniques. In order to establish the connection between transmitters and receivers, the far-fields incident onto the receivers are evaluated by EM analysis and are combined by extending an available Ray Tracing technique to the link study. EM theory is used to describe the receiving array as a linear active multiport network. Link performances in terms of bit error rate (BER) are eventually verified a posteriori by a fast system-level algorithm. In order to validate the proposed approach, four heterogeneous application contexts are provided. A complete MIMO link design in a realistic propagation scenario is meant to constitute the reference case study. The second one regards the design, optimization and testing of various typologies of rectennas for power generation by common RF sources. Finally, the project and implementation of two typologies of radio identification tags, at X-band and V-band respectively. In all the cases the importance of an exhaustive nonlinear/electromagnetic co-simulation and co-design is demonstrated to be essential for any accurate system performance prediction.

Definition, realization and evaluation of a software reference architecture for use in space applications

A recent initiative of the European Space Agency (ESA) aims at the definition and adoption of a software reference architecture for use in on-board software of future space missions. Our PhD project placed in the context of that effort. At the outset of our work we gathered all the industrial needs relevant to ESA and all the main European space stakeholders and we were able to consolidate a set of technical high-level requirements for the fulfillment of them. The conclusion we reached from that phase confirmed that the adoption of a software reference architecture was indeed the best solution for the fulfillment of the high-level requirements. The software reference architecture we set on building rests on four constituents: (i) a component model, to design the software as a composition of individually verifiable and reusable software units; (ii) a computational model, to ensure that the architectural description of the software is statically analyzable; (iii) a programming model, to ensure that the implementation of the design entities conforms with the semantics, the assumptions and the constraints of the computational model; (iv) a conforming execution platform, to actively preserve at run time the properties asserted by static analysis. The nature, feasibility and fitness of constituents (ii), (iii) and (iv), were already proved by the author in an international project that preceded the commencement of the PhD work. The core of the PhD project was therefore centered on the design and prototype implementation of constituent (i), a component model. Our proposed component model is centered on: (i) rigorous separation of concerns, achieved with the support for design views and by careful allocation of concerns to the dedicated software entities; (ii) the support for specification and model-based analysis of extra-functional properties; (iii) the inclusion space-specific concerns.