Innovative processes for syngas production

The research of new advanced processes for syngas production is a part of a European project for the production of a new Gas to Liquid Process (NextGTL). The crucial points in the production of GTL process are the energy required for the air separation used in autothermal reforming or the heat required for steam reforming and the efficiency in carbon utilization. Therefore a new multistep oxy-reforming process scheme was developed at lower temperature with intermediate H2 membrane separation to improve the crucial parameter. The process is characterized by a S/C of 0.7 and O2/C of 0.21 having a smoothed temperature profile in which kinetic regime is easily obtained. Active catalysts for low temperature oxy-reforming process have been studied working at low pressure to discriminate among the catalyst and at high pressure to prove it on industrial condition. It allows the selection of the Rh as active phase among single and bimetallic VIII group metal. The study of the matrix composition and thermal treatment has been carried out on Rh-Mg/Al hydrotalcite selected as reference catalyst. The research to optimize the catalyst lead to enhanced performances through the identification of a limitation of the Rh reduction from the oxides matrix as key point to increase the Rh performances. The Rh loading have been studied to allow the catalyst scale up for pilot process in Chieti in a shape of Rh-HT on honeycomb ceramic material. The developed catalyst has enhanced methane conversion in a inch diameter monolith reactor if compared with the semi-industrial catalyst chosen in the project as the best reference.

Caratterizzazione di membrane inorganiche per la separazione di idrogeno da gas di reforming

The work of this thesis has been focused on the characterisation of inorganic membranes for the hydrogen purification from steam reforming gas. Composite membranes based on porous inorganic supports coated with palladium silver alloys and ceramic membranes have been analysed. A brief resume of theoretical laws governing transport of gases through dense and porous inorganic membranes and an overview on different methods to prepare inorganic membranes has been also reported. A description of the experimental apparatus used for the characterisation of gas permeability properties has been reported. The device used permits to evaluate transport properties in a wide range of temperatures (till 500°C) and pressures (till 15 bar). Data obtained from experimental campaigns reveal a good agreement with Sievert law for hydrogen transport through dense palladium based membranes while different transport mechanisms, such as Knudsen diffusion and Hagen-Poiseuille flow, have been observed for porous membranes and for palladium silver alloy ones with pinholes in the metal layer. Mixtures permeation experiments reveal also concentration polarisation phenomena and hydrogen permeability reduction due to carbon monoxide adsorption on metal surface.

A chemical loop approach for methanol reforming

Over the past few years, the switch towards renewable sources for energy production is considered as necessary for the future sustainability of the world environment. Hydrogen is one of the most promising energy vectors for the stocking of low density renewable sources such as wind, biomasses and sun. The production of hydrogen by the steam-iron process could be one of the most versatile approaches useful for the employment of different reducing bio-based fuels. The steam iron process is a two-step chemical looping reaction based (i) on the reduction of an iron-based oxide with an organic compound followed by (ii) a reoxidation of the reduced solid material by water, which lead to the production of hydrogen. The overall reaction is the water oxidation of the organic fuel (gasification or reforming processes) but the inherent separation of the two semireactions allows the production of carbon-free hydrogen. In this thesis, steam-iron cycle with methanol is proposed and three different oxides with the generic formula AFe2O4 (A=Co,Ni,Fe) are compared in order to understand how the chemical properties and the structural differences can affect the productivity of the overall process. The modifications occurred in used samples are deeply investigated by the analysis of used materials. A specific study on CoFe2O4-based process using both classical and in-situ/ex-situ analysis is reported employing many characterization techniques such as FTIR spectroscopy, TEM, XRD, XPS, BET, TPR and Mössbauer spectroscopy.

A chemical-loop approach for the generation of hydrogen by means of ethanol reforming

The work investigates the feasibility of a new process aimed at the production of hydrogen with inherent separation of carbon oxides. The process consists in a cycle in which, in the first step, a mixed metal oxide is reduced by ethanol (obtained from biomasses). The reduced metal is then contacted with steam in order to split the water and sequestrating the oxygen into the looping material’s structure. The oxides used to run this thermochemical cycle, also called “steam-iron process” are mixed ferrites in the spinel structure MeFe2O4 (Me = Fe, Co, Ni or Cu). To understand the reactions involved in the anaerobic reforming of ethanol, diffuse reflectance spectroscopy (DRIFTS) was used, coupled with the mass analysis of the effluent, to study the surface composition of the ferrites during the adsorption of ethanol and its transformations during the temperature program. This study was paired with the tests on a laboratory scale plant and the characterization through various techniques such as XRD, Mössbauer spectroscopy, elemental analysis... on the materials as synthesized and at different reduction degrees In the first step it was found that besides the generation of the expected CO, CO2 and H2O, the products of ethanol anaerobic oxidation, also a large amount of H2 and coke were produced. The latter is highly undesired, since it affects the second step, during which water is fed over the pre-reduced spinel at high temperature. The behavior of the different spinels was affected by the nature of the divalent metal cation; magnetite was the oxide showing the slower rate of reduction by ethanol, but on the other hand it was that one which could perform the entire cycle of the process more efficiently. Still the problem of coke formation remains the greater challenge to solve.

Catalysts for H2 production

The research of new catalysts for the hydrogen production described in this thesis was inserted within a collaboration of Department of Industrial Chemistry and Materials of University of Bologna and Air Liquide (Centre de Recherche Claude-Delorme, Paris). The aim of the work was focused on the study of new materials, active and stable in the hydrogen production from methane, using either a new process, the catalytic partial oxidation (CPO), or a enhanced well-established process, the steam methane reforming (SMR). Two types of catalytic materials were examined: 1) Bulk catalysts, i.e. non-supported materials, in which the active metals (Ni and/or Rh) are stabilized inside oxidic matrix, obtained from perovskite type compounds (PVK) and from hydrotalcite type precursors (HT); 2) Structured catalysts, i.e. catalysts supported on materials having high thermal conductivity (SiC and metallic foams). As regards the catalytic partial oxidation, the effect of the metal (Ni and/or Rh), the role of the metal/matrix ratio and the matrix formulation of innovative catalysts obtained from hydrotalcite type precursors and from perovskites were examined. In addition, about steam reforming process, the study was carried out first on commercial type catalysts, examining the deactivation in industrial conditions, the role of the operating conditions and the activity of different type of catalysts. Then, innovative materials bulk (PVK and HT) and structured catalysts (SiC and metallic foam) were studied and a new preparation method was developed.

Caratterizzazione di membrane metalliche e ionomeriche per applicazioni energetiche

The work of this thesis has been focused on the characterization of metallic membranes for the hydrogen purification from steam reforming process and also of perfluorosulphonic acid ionomeric (PFSI) membranes suitable as electrolytes in fuel cell applications. The experimental study of metallic membranes was divided in three sections: synthesis of palladium and silver palladium coatings on porous ceramic support via electroless deposition (ELD), solubility and diffusivity analysis of hydrogen in palladium based alloys (temperature range between 200 and 400 °C up to 12 bar of pressure) and permeation experiments of pure hydrogen and mixtures containing, besides hydrogen, also nitrogen and methane at high temperatures (up to 600 °C) and pressures (up to 10 bar). Sequential deposition of palladium and silver on to porous alumina tubes by ELD technique was carried out using two different procedures: a stirred batch and a continuous flux method. Pure palladium as well as Pd-Ag membranes were produced: the Pd-Ag membranes’ composition is calculated to be close to 77% Pd and 23% Ag by weight which was the target value that correspond to the best performance of the palladium-based alloys. One of the membranes produced showed an infinite selectivity through hydrogen and relatively high permeability value and is suitable for the potential use as a hydrogen separator. The hydrogen sorption in silver palladium alloys was carried out in a gravimetric system on films produced by ELD technique. In the temperature range inspected, up to 400°C, there is still a lack in literature. The experimental data were analyzed with rigorous equations allowing to calculate the enthalpy and entropy values of the Sieverts’ constant; the results were in very good agreement with the extrapolation made with literature data obtained a lower temperature (up to 150 °C). The information obtained in this study would be directly usable in the modeling of hydrogen permeation in Pd-based systems. Pure and mixed gas permeation tests were performed on Pd-based hydrogen selective membranes at operative conditions close to steam-reforming ones. Two membranes (one produced in this work and another produced by NGK Insulators Japan) showed a virtually infinite selectivity and good permeability. Mixture data revealed the existence of non negligible resistances to hydrogen transport in the gas phase. Even if the decrease of the driving force due to polarization concentration phenomena occurs, in principle, in all membrane-based separation systems endowed with high perm-selectivity, an extensive experimental analysis lack, at the moment, in the palladium-based membrane process in literature. Moreover a new procedure has been introduced for the proper comparison of the mass transport resistance in the gas phase and in the membrane. Another object of study was the water vapor sorption and permeation in PFSI membranes with short and long side chains was also studied; moreover the permeation of gases (i.e. He, N2 and O2) in dry and humid conditions was considered. The water vapor sorption showed strong interactions between the hydrophilic groups and the water as revealed from the hysteresis in the sorption-desorption isotherms and thermo gravimetric analysis. The data obtained were used in the modeling of water vapor permeation, that was described as diffusion-reaction of water molecules, and in the humid gases permeation experiments. In the dry gas experiments the permeability and diffusivity was found to increase with temperature and with the equivalent weight (EW) of the membrane. A linear correlation was drawn between the dry gas permeability and the opposite of the equivalent weight of PFSI membranes, based on which the permeability of pure PTFE is retrieved in the limit of high EW. In the other hand O2 ,N2 and He permeability values was found to increase significantly, and in a similar fashion, with water activity. A model that considers the PFSI membrane as a composite matrix with a hydrophilic and a hydrophobic phase was considered allowing to estimate the variation of gas permeability with relative humidity on the basis of the permeability in the dry PFSI membrane and in pure liquid water.

Scienza, Tecnica, Politica: Il Problema del Metodo nel Pensiero di Jacopo Aconcio

The aim of this PhD thesis is to study accurately and in depth the figure and the literary production of the intellectual Jacopo Aconcio. This minor author of the 16th century has long been considered a sort of “enigmatic character”, a profile which results from the work of those who, for many centuries, have left his writing to its fate: a story of constant re-readings and equally incessant oversights. This is why it is necessary to re-read Aconcio’s production in its entirety and to devote to it a monographic study. Previous scholars’ interpretations will obviously be considered, but at the same time an effort will be made to go beyond them through the analysis of both published and manuscript sources, in the attempt to attain a deeper understanding of the figure of this man, who was a Christian, a military and hydraulic engineer and a political philosopher,. The title of the thesis was chosen to emphasise how, throughout the three years of the doctorate, my research concentrated in equal measure and with the same degree of importance on all the reflections and activities of Jacopo Aconcio. My object, in fact, was to establish how and to what extent the methodological thinking of the intellectual found application in, and at the same time guided, his theoretical and practical production. I did not mention in the title the author’s religious thinking, which has always been considered by everyone the most original and interesting element of his production, because religion, from the Reformation onwards, was primarily a political question and thus it was treated by almost all the authors involved in the Protestant movement - Aconcio in the first place. Even the remarks concerning the private, intimate sphere of faith have therefore been analysed in this light: only by acknowledging the centrality of the “problem of politics” in Aconcio’s theories, in fact, is it possible to interpret them correctly. This approach proves the truth of the theoretical premise to my research, that is to say the unity and orderliness of the author’s thought: in every field of knowledge, Aconcio applies the rules of the methodus resolutiva, as a means to achieve knowledge and elaborate models of pacific cohabitation in society. Aconcio’s continuous references to method can make his writing pedant and rather complex, but at the same time they allow for a consistent and valid analysis of different disciplines. I have not considered the fact that most of his reflections appear to our eyes as strongly conditioned by the time in which he lived as a limit. To see in him, as some have done, the forerunner of Descartes’ methodological discourse or, conversely, to judge his religious theories as not very modern, is to force the thought of an author who was first and foremost a Christian man of his own time. Aconcio repeats this himself several times in his writings: he wants to provide individuals with the necessary tools to reach a full-fledged scientific knowledge in the various fields, and also to enable them to seek truth incessantly in the religious domain, which is the duty of every human being. The will to find rules, instruments, effective solutions characterizes the whole of the author’s corpus: Aconcio feels he must look for truth in all the arts, aware as he is that anything can become science as long as it is analysed with method. Nevertheless, he remains a man of his own time, a Christian convinced of the existence of God, creator and governor of the world, to whom people must account for their own actions. To neglect this fact in order to construct a “character”, a generic forerunner, but not participant, of whatever philosophical current, is a dangerous and sidetracking operation. In this study, I have highlighted how Aconcio’s arguments only reveal their full meaning when read in the context in which they were born, without depriving them of their originality but also without charging them with meanings they do not possess. Through a historical-doctrinal approach, I have tried to analyse the complex web of theories and events which constitute the substratum of Aconcio’s reflection, in order to trace the correct relations between texts and contexts. The thesis is therefore organised in six chapters, dedicated respectively to Aconcio’s biography, to the methodological question, to the author’s engineering activity, to his historical knowledge and to his religious thinking, followed by a last section concerning his fortune throughout the centuries. The above-mentioned complexity is determined by the special historical moment in which the author lived. On the one hand, thanks to the new union between science and technique, the 16th century produces discoveries and inventions which make available a previously unthinkable number of notions and lead to a “revolution” in the way of studying and teaching the different subjects, which, by producing a new form of intellectual, involved in politics but also aware of scientific-technological issues, will contribute to the subsequent birth of modern science. On the other, the 16th century is ravaged by religious conflicts, which shatter the unity of the Christian world and generate theological-political disputes which will inform the history of European states for many decades. My aim is to show how Aconcio’s multifarious activity is the conscious fruit of this historical and religious situation, as well as the attempt of an answer to the request of a new kind of engagement on the intellectual’s behalf. Plunged in the discussions around methodus, employed in the most important European courts, involved in the abrupt acceleration of technical-scientific activities, and especially concerned by the radical religious reformation brought on by the Protestant movement, Jacopo Aconcio reflects this complex conjunction in his writings, without lacking in order and consistency, differently from what many scholars assume. The object of this work, therefore, is to highlight the unity of the author’s thought, in which science, technique, faith and politics are woven into a combination which, although it may appear illogical and confused, is actually tidy and methodical, and therefore in agreement with Aconcio’s own intentions and with the specific characters of European culture in the Renaissance. This theory is confirmed by the reading of the Ars muniendorum oppidorum, Aconcio’s only work which had been up till now unavailable. I am persuaded that only a methodical reading of Aconcio’s works, without forgetting nor glorifying any single one, respects the author’s will. From De methodo (1558) onwards, all his writings are summae, guides for the reader who wishes to approach the study of the various disciplines. Undoubtedly, Satan’s Stratagems (1565) is something more, not only because of its length, but because it deals with the author’s main interest: the celebration of doubt and debate as bases on which to build religious tolerance, which is the best method for pacific cohabitation in society. This, however, does not justify the total centrality which the Stratagems have enjoyed for centuries, at the expense of a proper understanding of the author’s will to offer examples of methodological rigour in all sciences. Maybe it is precisely because of the reforming power of Aconcio’s thought that, albeit often forgotten throughout the centuries, he has never ceased to reappear and continues to draw attention, both as a man and as an author. His ideas never stop stimulating the reader’s curiosity and this may ultimately be the best demonstration of their worth, independently from the historical moment in which they come back to the surface.

Il ruolo delle idee e del loro cambiamento nei processi di policy making universitario nel mondo anglosassone dagli anni ottanta ad oggi. I casi di Inghilterra e Nuova Zelanda in prospettiva comparata

THE TITLE OF MY THESIS IS THE ROLE OF THE IDEAS AND THEIR CHANGE IN HIGHER EDUCATION POLICY-MAKING PROCESSES FROM THE EIGHTIES TO PRESENT-DAY: THE CASES OF ENGLAND AND NEW ZEALAND IN COMPARATIVE PERSPECTIVE UNDER A THEORETICAL POINT OF VIEW, THE AIM OF MY WORK IS TO CARRY OUT A RESEARCH MODELLED ON THE CONSTRUCTIVIST THEORY. IT FOCUSES ON THE ANALYSIS OF THE IMPACT OF IDEAS ON THE PROCESSES OF POLICY MAKING BY MEANS OF EPISTEMIC COMMUNITIES, THINK TANKS AND VARIOUS SOCIOECONOMIC CONTEXTS THAT MAY HAVE PLAYED A KEY ROLE IN THE CONSTRUCTION OF THE DIFFERENT PATHS. FROM MY POINT OF VIEW IDEAS CONSTITUTE A PRIORITY RESEARCH FIELD WHICH IS WORTH ANALYSING SINCE THEIR ROLE IN POLICY MAKING PROCESSES HAS BEEN TRADITIONALLY RATHER UNEXPLORED. IN THIS CONTEXT AND WITH THE AIM OF DEVELOPING A RESEARCH STRAND BASED ON THE ROLE OF IDEAS, I INTEND TO CARRY ON MY STUDY UNDER THE PERSPECTIVE OF CHANGE. DEPENDING ON THE DATA AND INFORMATION THAT I COLLECTED I EVALUATED THE WEIGHT OF EACH OF THESE VARIABLES AND MAYBE OTHERS SUCH AS THE INSTITUTIONS AND THE INDIVIDUAL INTERESTS, WHICH MAY HAVE INFLUENCED THE FORMATION OF THE POLICY MAKING PROCESSES. UNDER THIS LIGHT, I PLANNED TO ADOPT THE QUALITATIVE METHODOLOGY OF RESEARCH WHICH I BELIEVE TO BE VERY EFFECTIVE AGAINST THE MORE DIFFICULT AND POSSIBLY REDUCTIVE APPLICATION OF QUANTITIVE DATA SETS. I RECKON THEREFORE THAT THE MOST APPROPRIATE TOOLS FOR INFORMATION PROCESSING INCLUDE CONTENT ANALYSIS, AND IN-DEPTH INTERVIEWS TO PERSONALITIES OF THE POLITICAL PANORAMA (ÉLITE OR NOT) WHO HAVE PARTICIPATED IN THE PROCESS OF HIGHER EDUCATION REFORM FROM THE EIGHTIES TO PRESENT-DAY. THE TWO CASES TAKEN INTO CONSIDERATION SURELY SET AN EXAMPLE OF RADICAL REFORM PROCESSES WHICH HAVE OCCURRED IN QUITE DIFFERENT CONTEXTS DETERMINED BY THE SOCIOECONOMIC CHARACTERISTICS AND THE TRAITS OF THE ÉLITE. IN NEW ZEALAND THE DESCRIBED PROCESS HAS TAKEN PLACE WITH A STEADY PACE AND A GOOD GRADE OF CONSEQUANTIALITY, IN LINE WTH THE REFORMS IN OTHER STATE DIVISIONS DRIVEN BY THE IDEAS OF THE NEW PUBLIC MANAGEMENT. CONTRARILY IN ENGLAND THE REFORMATIVE ACTION OF MARGARET THATCHER HAS ACQUIRED A VERY RADICAL CONNOTATION AS IT HAS BROUGHT INTO THE AMBIT OF HIGHER EDUCATION POLICY CONCEPTS LIKE EFFICIENCY, EXCELLENCE, RATIONALIZATION THAT WOULD CONTRAST WITH THE GENERALISTIC AND MASS-ORIENTED IDEAS THAT WERE FASHIONABLE DURING THE SEVENTIES. THE MISSION I INTEND TO ACCOMPLISH THORUGHOUT MY RESEARCH IS TO INVESTIGATE AND ANALYSE INTO MORE DEPTH THE DIFFERENCES THAT SEEM TO EMERGE FROM TWO CONTEXTS WHICH MOST OF THE LITERATURE REGARDS AS A SINGLE MODEL: THE ANGLO-SAXON MODEL. UNDER THIS LIGHT, THE DENSE ANALYSIS OF POLICY PROCESSES ALLOWED TO BRING OUT BOTH THE CONTROVERSIAL AND CONTRASTING ASPECTS OF THE TWO REALITIES COMPARED, AND THE ROLE AND WEIGHT OF VARIABLES SUCH AS IDEAS (MAIN VARIABLE), INSTITUTIONAL SETTINGS AND INDIVIDUAL INTERESTS ACTING IN EACH CONTEXT. THE CASES I MEAN TO ATTEND PRESENT PECULIAR ASPECTS WORTH DEVELOPING AN IN-DEPTH ANALYSIS, AN OUTLINE OF WHICH WILL BE PROVIDED IN THIS ABSTRACT. ENGLAND THE CONSERVATIVE GOVERNMENT, SINCE 1981, INTRODUCED RADICAL CHANGES IN THE SECTOR OF HIGHER EDUCATION: FIRST CUTTING DOWN ON STATE FUNDINGS AND THEN WITH THE CREATION OF AN INSTITUTION FOR THE PLANNING AND LEADERSHIP OF THE POLYTECHNICS (NON-UNIVERSITY SECTOR). AFTERWARDS THE SCHOOL REFORM BY MARGARET THATCHER IN 1988 RAISED TO A GREAT STIR ALL OVER EUROPE DUE TO BOTH ITS CONSIDERABLE INNOVATIVE IMPRINT AND THE STRONG ATTACK AGAINST THE PEDAGOGY OF THE ‘ACTIVE’ SCHOOLING AND PROGRESSIVE EDUCATION, UNTIL THEN RECOGNIZED AS A MERIT OF THE BRITISH PUBLIC SCHOOL. IN THE AMBIT OF UNIVERSITY EDUCATION THIS REFORM, TOGETHER WITH SIMILAR MEASURES BROUGHT IN DURING 1992, PUT INTO PRACTICE THE CONSERVATIVE PRINCIPLES THROUGH A SERIES OF ACTIONS THAT INCLUDED: THE SUPPRESSION OF THE IRREMOVABILITY PRINCIPLE FOR UNIVERSITY TEACHERS; THE INTRODUCTION OF STUDENT LOANS FOR LOW-INCOME STUDENTS AND THE CANCELLATION OF THE CLEAR DISTINCTION BETWEEN UNIVERSITIES AND POLYTECHNICS. THE POLICIES OF THE LABOUR MAJORITY OF MR BLAIR DID NOT QUITE DIVERGE FROM THE CONSERVATIVES’ POSITION. IN 2003 BLAIR’S CABINET RISKED TO BECOME A MINORITY RIGHT ON THE OCCASION OF AN IMPORTANT UNIVERSITY REFORM PROPOSAL. THIS PROPOSAL WOULD FORESEE THE AUTONOMY FOR THE UNIVERSITIES TO RAISE UP TO 3.000 POUNDS THE ENROLMENT FEES FOR STUDENTS (WHILE FORMERLY THE CEILING WAS 1.125 POUNDS). BLAIR HAD TO FACE INTERNAL OPPOSITION WITHIN HIS OWN PARTY IN RELATION TO A MEASURE THAT, ACCORDING TO THE 150 MPS PROMOTERS OF AN ADVERSE MOTION, HAD NOT BEEN INCLUDED IN THE ELECTORAL PROGRAMME AND WOULD RISK CREATING INCOME-BASED DISCRIMINATION AMONG STUDENTS. AS A MATTER OF FACT THE BILL FOCUSED ON THE INTRODUCTION OF VERY LOW-INTEREST STUDENT LOANS TO BE SETTLED ONLY WHEN THE STUDENT WOULD HAVE FOUND A REMUNERATED OCCUPATION (A SYSTEM ALREADY PROVIDED FOR BY THE AUSTRALIAN LEGISLATION). NEW ZEALAND CONTRARILY TO MANY OTHER COUNTRIES, NEW ZEALAND HAS ADOPTED A VERY WIDE VISION OF THE TERTIARY EDUCATION. IT INCLUDES IN FACT THE FULL EDUCATIONAL PROGRAMME THAT IS INTERNATIONALLY RECOGNIZED AS THE POST-SECONDARY EDUCATION. SHOULD WE SPOTLIGHT A PECULIARITY OF THE NEW ZEALAND TERTIARY EDUCATION POLICY THEN IT WOULD BE ‘CHANGE’. LOOKING AT THE REFORM HISTORY RELATED TO THE TERTIARY EDUCATION SYSTEM, WE CAN CLEARLY IDENTIFY FOUR ‘SUB-PERIODS’ FROM THE EIGHTIES TO PRESENT-DAY: 1. BEFORE THE 80S’: AN ELITARIAN SYSTEM CHARACTERIZED BY LOW PARTICIPATION RATES. 2. BETWEEN MID AND LATE 80S’: A TREND TOWARDS THE ENLARGEMENT OF PARTICIPATION ASSOCIATED TO A GREATER COMPETITION. 3. 1990-1999: A FUTHER STEP TOWARDS A COMPETITIVE MODEL BASED ON THE MARKET-ORIENTED SYSTEM. 4. FROM 2000 TO TODAY: A CONTINUOUS EVOLUTION TOWARDS A MORE COMPETITIVE MODEL BASED ON THE MARKET-ORIENTED SYSTEM TOGETHER WITH A GROWING ATTENTION TO STATE CONTROL FOR SOCIAL AND ECONOMIC DEVELOPMENT OF THE NATION. AT PRESENT THE GOVERNMENT OF NEW ZEALAND OPERATES TO STRENGHTHEN THIS PROCESS, PRIMARILY IN RELATION TO THE ROLE OF TERTIARY EDUCATION AS A STEADY FACTOR OF NATIONAL WALFARE, WHERE PROFESSIONAL DEVELOPMENT CONTRIBUTES ACTIVELY TO THE GROWTH OF THE NATIONAL ECONOMIC SYSTEM5. THE CASES OF ENGLAND AND NEW ZEALAND ARE THE FOCUS OF AN IN-DEPTH INVESTIGATION THAT STARTS FROM AN ANALYSIS OF THE POLICIES OF EACH NATION AND DEVELOP INTO A COMPARATIVE STUDY. AT THIS POINT I ATTEMPT TO DRAW SOME PRELIMINARY IMPRESSIONS ON THE FACTS ESSENTIALLY DECRIBED ABOVE. THE UNIVERSITY POLICIES IN ENGLAND AND NEW ZEALAND HAVE BOTH UNDERGONE A SIGNIFICANT REFORMATORY PROCESS SINCE THE EARLY EIGHTIES; IN BOTH CONTEXTS THE IMPORTANCE OF IDEAS THAT CONSTITUTED THE BASE OF POLITICS UNTIL 1980 WAS QUITE RELEVANT. GENERALLY SPEAKING, IN BOTH CASES THE PRE-REFORM POLICIES WERE INSPIRED BY EGALITARIANISM AND EXPANSION OF THE STUDENT POPULATION WHILE THOSE BROUGHT IN BY THE REFORM WOULD PURSUE EFFICIENCY, QUALITY AND COMPETITIVENESS. UNDOUBTEDLY, IN LINE WITH THIS GENERAL TENDENCY THAT REFLECTS THE HYPOTHESIS PROPOSED, THE TWO UNIVERSITY SYSTEMS PRESENT SEVERAL DIFFERENCES. THE UNIVERSITY SYSTEM IN NEW ZEALAND PROCEEDED STEADILY TOWARDS THE IMPLEMENTATION OF A MANAGERIAL CONCEPTION OF TERTIARY EDUCATION, ESPECIALLY FROM 1996 ONWARDS, IN ACCORDANCE WITH THE REFORMATORY PROCESS OF THE WHOLE PUBLIC SECTOR. IN THE UNITED KINGDOM, AS IN THE REST OF EUROPE, THE NEW APPROACH TO UNIVERSITY POLICY-MAKING HAD TO CONFRONT A DEEP-ROOTED TRADITION OF PROGRESSIVE EDUCATION AND THE IDEA OF EDUCATION EXPANSION THAT IN FACT DOMINATED UNTIL THE EIGHTIES. FROM THIS VIEW POINT THE GOVERNING ACTION OF MARGARET THATCHER GAVE RISE TO A RADICAL CHANGE THAT REVOLUTIONIZED THE OBJECTIVES AND KEY VALUES OF THE WHOLE EDUCATIONAL SYSTEM, IN PARTICULAR IN THE HIGHER EDUCATION SECTOR. IDEAS AS EFFICIENCY, EXCELLENCE AND CONTROL OF THE PERFORMANCE BECAME DECISIVE. THE LABOUR CABINETS OF BLAIR DEVELOPED IN THE WAKE OF CONSERVATIVE REFORMS. THIS APPEARS TO BE A FOCAL POINT OF THIS STUDY THAT OBSERVES HOW ALSO IN NEW ZEALAND THE REFORMING PROCESS OCCURRED TRANSVERSELY DURING PROGRESSIVE AND CONSERVATIVE ADMINISTRATIONS. THE PRELIMINARY IMPRESSION IS THEREFORE THAT IDEAS DEEPLY MARK THE REFORMATIVE PROCESSES: THE AIM OF MY RESEARCH IS TO VERIFY TO WHICH EXTENT THIS STATEMENT IS TRUE. IN ORDER TO BUILD A COMPREHENSIVE ANALYLIS, FURTHER SIGNIFICANT FACTORS WILL HAVE TO BE INVESTIGATED: THE WAY IDEAS ARE PERCEIVED AND IMPLEMENTED BY THE DIFFERENT POLITICAL ELITES; HOW THE VARIOUS SOCIOECONOMIC CONTEXTS INFLUENCE THE REFORMATIVE PROCESS; HOW THE INSTITUTIONAL STRUCTURES CONDITION THE POLICY-MAKING PROCESSES; WHETHER INDIVIDUAL INTERESTS PLAY A ROLE AND, IF YES, TO WHICH EXTENT.

Catalysts and processes for next-generation H2 production

The present study is focused on the development of new VIII group metal on CeO2 – ZrO2 (CZO) catalyst to be used in reforming reaction for syngas production. The catalyst are tested in the oxyreforming process, extensively studied by Barbera [44] in a new multistep process configuration, with intermediate H2 membrane separation, that can be carried out at lower temperature (750°C) with respect the reforming processes (900 – 1000°C). In spite of the milder temperatures, the oxy-reforming conditions (S/C = 0.7; O2/C = 0.21) remain critical regarding the deactivation problems mainly deriving from thermal sintering and carbon formation phenomena. The combination of the high thermal stability characterizing the ZrO2, with the CeO2 redox properties, allows the formation of stable mixed oxide system with high oxygen mobility. This feature can be exploited in order to contrast the carbon deposition on the active metal surface through the oxidation of the carbon by means of the mobile oxygen atoms available at the surface of the CZO support. Ce0.5Zr0.5O2 is the phase claimed to have the highest oxygen mobility but its formation is difficult through classical synthesis (co-precipitation), hence a water-in-oil microemulsion method is, widely studied and characterized. Two methods (IWI and bulk) for the insertion of the active metal (Rh, Ru, Ni) are followed and their effects, mainly related to the metal stability and dispersion on the support, are discussed, correlating the characterization with the catalytic activity. Different parameters (calcination and reduction temperatures) are tuned to obtain the best catalytic system both in terms of activity and stability. Interesting results are obtained with impregnated and bulk catalysts, the latter representing a new class of catalysts. The best catalysts are also tested in a low temperature (350 – 500°C) steam reforming process and preliminary tests with H2 membrane separation have been also carried out.