Fluid dynamic analysis and modelling of industrial chemical equipment

The research is aimed at contributing to the identification of reliable fully predictive Computational Fluid Dynamics (CFD) methods for the numerical simulation of equipment typically adopted in the chemical and process industries. The apparatuses selected for the investigation, specifically membrane modules, stirred vessels and fluidized beds, were characterized by a different and often complex fluid dynamic behaviour and in some cases the momentum transfer phenomena were coupled with mass transfer or multiphase interactions. Firs of all, a novel modelling approach based on CFD for the prediction of the gas separation process in membrane modules for hydrogen purification is developed. The reliability of the gas velocity field calculated numerically is assessed by comparison of the predictions with experimental velocity data collected by Particle Image Velocimetry, while the applicability of the model to properly predict the separation process under a wide range of operating conditions is assessed through a strict comparison with permeation experimental data. Then, the effect of numerical issues on the RANS-based predictions of single phase stirred tanks is analysed. The homogenisation process of a scalar tracer is also investigated and simulation results are compared to original passive tracer homogenisation curves determined with Planar Laser Induced Fluorescence. The capability of a CFD approach based on the solution of RANS equations is also investigated for describing the fluid dynamic characteristics of the dispersion of organics in water. Finally, an Eulerian-Eulerian fluid-dynamic model is used to simulate mono-disperse suspensions of Geldart A Group particles fluidized by a Newtonian incompressible fluid as well as binary segregating fluidized beds of particles differing in size and density. The results obtained under a number of different operating conditions are compared with literature experimental data and the effect of numerical uncertainties on axial segregation is also discussed.

Indoor and Outdoor Natural Radioactivity in the Vulsini Volcanic District (Central Italy): Estimation of Doses and Radiological Risks

Terrestrial radioactivity for most individual is the major contributor to the total dose and is mostly provided by 238U, 232Th and 40K radionuclides. In particular indoor radioactivity is principally due to 222Rn, a radioactive noble gas descendent of 238U, second cause of lung cancer after cigarettes smoking. Vulsini Volcanic District is a well known quaternary volcanic area located between the northern Latium and southern Tuscany (Central Italy). It is characterized by an high natural radiation background resulting from the high concentrations of 238U, 232Th and 40K in the volcanic products. In this context, subduction-related metasomatic enrichment of incompatible elements in the mantle source coupled with magma differentiation within the upper crust has given rise to U, Th and K enriched melts. Almost every ancient village and town located in this part of Italy has been built with volcanic rocks pertaining to the Vulsini Volcanic District. The radiological risk of living in this area has been estimated considering separately: a. the risk associated with buildings made of volcanic products and built on volcanic rock substrates b. the risk associated to soil characteristics. The former has been evaluated both using direct 222Rn indoor measurements and simulations of “standard rooms” built with the tuffs and lavas from the Vulsini Volcanic District investigated in this work. The latter has been carried out by using in situ measurements of 222Rn activity in the soil gases. A radon risk map for the Bolsena village has been developed using soil radon measurements integrating geological information. Data of airborne radioactivity in ambient aerosol at two elevated stations in Emilia Romagna (North Italy) under the influence of Fukushima plume have been collected, effective doses have been calculated and an extensive comparison between doses associated with artificial and natural sources in different area have been described and discussed.

Essays in Media and Finance

This Ph.D. thesis consists in three research papers focused on the relationship between media industry and the financial sector. The importance of a correct understanding what is the effect of media on financial markets is becoming increasingly important as long as fully informed markets hypothesis has been challenged. Therefore, if financial markets do not have access to complete information, the importance of information professionals, the media, follows. On the other side, another challenge for economic and finance scholar is to understand how financial features are able to influence media and to condition information disclosure. The main aim of this Ph.D. dissertation is to contribute to a better comprehension for both the phenomena. The first paper analyzes the effects of owning equity shares in a newspaper- publishing firm. The main findings show how for a firm being part of the ownership structure of a media firm ends to receive more and better coverage. This confirms the view in which owning a media outlet is a source of conflicts of interest. The second paper focuses on the effect of media-delivered information on financial markets. In the framework of IPO in the U.S. market, we found empirical evidence of a significant effect of the media role in the IPO pricing. Specifically, increasing the quantity and the quality of the coverage increases the first-day returns (i.e. the underpricing). Finally the third paper tries to summarize what has been done in studying the relationship between media and financial industries, putting together contributes from economic, business, and financial scholars. The main finding of this dissertation is therefore to have underlined the importance and the effectiveness of the relationship between media industry and the financial sector, contributing to the stream of research that investigates about the media role and media effectiveness in the financial and business sectors.

Realizzazione di riporti funzionalizzanti su superfici ceramiche per la produzione di energia elettrica mediante effetto fotovoltaico

This research, carried out during the PhD in Materials Engineering, deals with the creation of layers, with different functionality, deposited on a ceramic substrate, to obtain photovoltaic cells for electricity production. The research activities are included in the project PRRIITT, Measure 4 (Development of Networks), Action A (Research and Technology Transfer Laboratories), Thematic reference 3 (Advanced materials applications development), co-financed by the Emilia Romagna Region, for the creation of CECERBENCH laboratory, which aims to develop "Tiles with a functionalised surface”. The innovation lies in the study of materials and in the development of technologies to achieve a "photovoltaic surface", directly in the tiles production process. The goal is to preserve the technical characteristics, and to make available new surfaces, exploiting renewable energy sources. The realization of Building Integrated PhotoVoltaic (BIPV) is nowadays a more and more spread tendency. The aims of the research are essentially linked to the need to diversify the actual ceramic tile production (which is strongly present in the Emilia Romagna Region ), and to provide a higher added value to the tiles. Solar energy production is the primary objective of the functionalization, and has a relevant ecological impact, taking into account the overwhelming global energy demand. The specific activities of the PhD were carried out according to the achievement of scientific and technological objectives of CECERBENCH laboratory, and involved the collaboration in design solutions, to obtain the cells directly on the tiles surface. The author has managed personally a part of the research project. Layers with different features were made: - Electrically conductive layers, directly on the ceramic tiles surface; - Layers to obtain the photovoltaic functionality; - Electrically insulating, protective layers (double function). For each layer, the most suitable materials have been selected. Among the technical application, the screen printing was used. This technique, widely used in ceramics, has many application areas, including the electronics and photovoltaic industries. It is an inexpensive technique, easy to use in industrial production lines. The screen printing technique was therefore studied in depth by theoretical considerations, and through the use of rheological measurements.

Development of glass-ceramics from combination of industrial wastes together with boron mining waste

The utilization of borate mineral wastes with glass-ceramic technology was first time studied and primarily not investigated combinations of wastes were incorporated into the research. These wastes consist of; soda lime silica glass, meat bone and meal ash and fly ash. In order to investigate possible and relevant application areas in ceramics, kaolin clay, an essential raw material for ceramic industry was also employed in some studied compositions. As a result, three different glass-ceramic articles obtained by using powder sintering method via individual sintering processes. Light weight micro porous glass-ceramic from borate mining waste, meat bone and meal ash and kaolin clay was developed. In some compositions in related study, soda lime silica glass waste was used as an additive providing lightweight structure with a density below 0.45 g/cm3 and a crushing strength of 1.8±0.1 MPa. In another study within the research, compositions respecting the B2O3–P2O5–SiO2 glass-ceramic ternary system were prepared from; borate wastes, meat bone and meal ash and soda lime silica glass waste and sintered up to 950ºC. Low porous, highly crystallized glass-ceramic structures with density ranging between 1.8 ± 0,7 to 2.0 ± 0,3 g/cm3 and tensile strength ranging between 8,0 ± 2 to 15,0 ± 0,5 MPa were achieved. Lastly, diopside - wollastonite (SiO2-Al2O3-CaO )glass-ceramics from borate wastes, fly ash and soda lime silica glass waste were successfully obtained with controlled rapid sintering between 950 and 1050ºC. The wollastonite and diopside crystal sizes were improved by adopting varied combinations of formulations and heating rates. The properties of the obtained materials show; the articles with a uniform pore structure could be useful for thermal and acoustic insulations and can be embedded in lightweight concrete where low porous glass-ceramics can be employed as building blocks or additive in cement and ceramic industries.

Luigi Nono: spazio e composizione

Architettura e musica. Spazio e tempo. Suono. Esperienza. Queste le parole chiave da cui ha preso avvio la mia ricerca. Tutto è iniziato dall’intuizione dell’esistenza di un legame tra due discipline cui ho dedicato molto tempo e studio, completando due percorsi accademici paralleli, la Facoltà di architettura e il Conservatorio. Dopo un lavoro d’individuazione e analisi degli infiniti spunti di riflessione che il tema offriva, ho focalizzato l’attenzione su uno degli esempi più emblematici di collaborazione tra un architetto e un musicista realizzatasi nel Novecento: Prometeo, tragedia dell’ascolto (1984), composta da Luigi Nono con la collaborazione di Massimo Cacciari e Renzo Piano. Attraverso lo studio di Prometeo ho potuto affrontare la trattazione di molte delle possibili declinazioni del rapporto interdisciplinare tra musica e architettura. La ricerca si è svolta principalmente sullo studio dei materiali conservati presso l’Archivio Luigi Nono e l’archivio della Fondazione Renzo Piano. La tesi è organizzata in tre parti: una prima parte in cui si affronta il tema del ruolo dello spazio nelle opere di Nono precedenti a Prometeo, facendo emergere l’importanza dell’ambiente culturale e sonoro veneziano; una seconda parte in cui si approfondisce il processo compositivo che ha portato alle rappresentazioni di Prometeo a Venezia, Milano e a Parigi; una terza parte in cui si prende in considerazione quanto avvenuto dopo Prometeo e si riflette sui contributi che questa esperienza può portare alla progettazione di spazi per la musica, analizzando diversi allestimenti dell’opera senza arca e prendendo in considerazione i progetti dell’auditorium dell’International Art Village di Akiyoshidai e della sala della nuova Philharmonie di Parigi. Lo studio dell’esperienza di Prometeo ha lo scopo di stimolare la curiosità verso la ricerca e la sperimentazione di quegli infiniti possibili della composizione architettonica e musicale di cui parla Nono.