Development of sexing systems functional to mass production of Aedes albopictus sterile males

Aedes albopictus is a vector able to transmit several arboviruses. Due to its high impact on human health, it is important to develop an efficient control strategy for this pest. Nowadays, control based on chemical insecticides is limited by the number of available active principles and the occurrence of resistance. A valuable alternative to the conventional control strategies is the sterile insect technique (SIT) which relies on releasing sterile males of the target insect. Mating between wild females and sterile males results in no viable offspring. A crucial aspect of SIT is the production of a large number of sterile males with a low presence of females that can bite and transmit viruses. The present thesis aimed to find, implement and study the most reliable mechanical sex sorter and protocol to implement male productivity and reduce female contamination. In addition, I evaluated different variables and sorting protocols to enable female recovery for breeding purposes. Furthermore, I studied the creation of a hyper-protandric strain potentially able to produce only males. I also assessed the integration of artificial intelligence with an optical unit to identify sexes at the adult stage. All these applications helped to realise a mass production model in Italy with a potential weekly production of 1 million males. Moreover, I studied and applied for aerial sterile male release in an urban environment. This technology could allow the release of males in a wide area, overcoming environmental and urban obstacles. However, the development and application of drone technologies in a metropolitan area close to airports, such as in Bologna area, must fit specific requirements. Lastly, at Réunion Island, during a Short Term Scientific Mission France (AIM-COST Action), Indian Ocean, I studied the Boosted SIT application. Coating sterile males with Pyriproxyfen may help spread the insecticide into the larval breeding sites.

Mass transport in polymers

The study of mass transport in polymeric membranes has grown in importance due to its potential application in many processes such as separation of gases and vapors, packaging, controlled drug release. The diffusion of a low molecular weight species in a polymer is often accompanied by other phenomena like swelling, reactions, stresses, that have not been investigated in all their aspects yet. Furthermore, novel materials have been developed that include inorganic fillers, reactive functional groups or ions, that make the scenery even more complicated. The present work focused on the experimental study of systems where the diffusion is accompanied by other processes; suitable models were also developed to describe the particular circumstances in order to understand the underlying concepts and be able to design the performances of the material. The effect of solvent-induced deformation in polymeric films during sorption processes was studied since the dilation, especially in constrained membranes, can cause the development of stresses and therefore early failures of the material. The bending beam technique was used to test the effects of the dilation and the stress induced in the polymer by penetrant diffusion. A model based on the laminate theory was developed that accounts for the swelling and is able to predict the stress that raise in the material. The addition of inorganic fillers affects the transport properties of polymeric films. Mixed matrix membranes based on fluorinated, high free volume matrices show attractive performances for separation purposes but there is a need for deeper investigation of the selectivity properties towards gases and vapors. A new procedure based on the NELF model was tested on the experimental data; it allows to predict solubility of every penetrant on the basis of data for one vapor. The method has proved to be useful also for the determination of the diffusion coefficient and for an estimation of the permeability in the composite materials. Oxygen scavenging systems can overcome lack of barrier properties in common polymers that forbids their application in sensitive applications as food packaging. The final goal of obtaining a membrane almost impermeable to oxygen leads to experimental times out of reach. Hence, a simple model was developed in order to describe the transport of oxygen in a membrane with also reactive groups and analyze the experimental data collected on SBS copolymers that show attractive scavenging capacity. Furthermore, a model for predicting the oxygen barrier behavior of a film formed as a blend of OSP in a common packaging material was built, considering particles capable of reactions with oxygen embedded in a non-reactive matrix. Perfluorosulphonic acid ionomers (PFSI) are capturing attention due to a high thermal and chemical resistance coupled with very peculiar transport properties, that make them appropriate to be used in fuel cells. The possible effect of different formation procedure was studied together with the swelling due to water sorption since both water uptake and dilation can dramatically affect the fuel cells performances. The water diffusion and sorption was studied with a FTIR-ATR spectrometer that can give deeper information on the bonds between water molecules and the sulphonic hydrophilic groups and, therefore, on the microstructure of the hydrated ionomer.

Il ruolo delle idee e del loro cambiamento nei processi di policy making universitario nel mondo anglosassone dagli anni ottanta ad oggi. I casi di Inghilterra e Nuova Zelanda in prospettiva comparata

THE TITLE OF MY THESIS IS THE ROLE OF THE IDEAS AND THEIR CHANGE IN HIGHER EDUCATION POLICY-MAKING PROCESSES FROM THE EIGHTIES TO PRESENT-DAY: THE CASES OF ENGLAND AND NEW ZEALAND IN COMPARATIVE PERSPECTIVE UNDER A THEORETICAL POINT OF VIEW, THE AIM OF MY WORK IS TO CARRY OUT A RESEARCH MODELLED ON THE CONSTRUCTIVIST THEORY. IT FOCUSES ON THE ANALYSIS OF THE IMPACT OF IDEAS ON THE PROCESSES OF POLICY MAKING BY MEANS OF EPISTEMIC COMMUNITIES, THINK TANKS AND VARIOUS SOCIOECONOMIC CONTEXTS THAT MAY HAVE PLAYED A KEY ROLE IN THE CONSTRUCTION OF THE DIFFERENT PATHS. FROM MY POINT OF VIEW IDEAS CONSTITUTE A PRIORITY RESEARCH FIELD WHICH IS WORTH ANALYSING SINCE THEIR ROLE IN POLICY MAKING PROCESSES HAS BEEN TRADITIONALLY RATHER UNEXPLORED. IN THIS CONTEXT AND WITH THE AIM OF DEVELOPING A RESEARCH STRAND BASED ON THE ROLE OF IDEAS, I INTEND TO CARRY ON MY STUDY UNDER THE PERSPECTIVE OF CHANGE. DEPENDING ON THE DATA AND INFORMATION THAT I COLLECTED I EVALUATED THE WEIGHT OF EACH OF THESE VARIABLES AND MAYBE OTHERS SUCH AS THE INSTITUTIONS AND THE INDIVIDUAL INTERESTS, WHICH MAY HAVE INFLUENCED THE FORMATION OF THE POLICY MAKING PROCESSES. UNDER THIS LIGHT, I PLANNED TO ADOPT THE QUALITATIVE METHODOLOGY OF RESEARCH WHICH I BELIEVE TO BE VERY EFFECTIVE AGAINST THE MORE DIFFICULT AND POSSIBLY REDUCTIVE APPLICATION OF QUANTITIVE DATA SETS. I RECKON THEREFORE THAT THE MOST APPROPRIATE TOOLS FOR INFORMATION PROCESSING INCLUDE CONTENT ANALYSIS, AND IN-DEPTH INTERVIEWS TO PERSONALITIES OF THE POLITICAL PANORAMA (ÉLITE OR NOT) WHO HAVE PARTICIPATED IN THE PROCESS OF HIGHER EDUCATION REFORM FROM THE EIGHTIES TO PRESENT-DAY. THE TWO CASES TAKEN INTO CONSIDERATION SURELY SET AN EXAMPLE OF RADICAL REFORM PROCESSES WHICH HAVE OCCURRED IN QUITE DIFFERENT CONTEXTS DETERMINED BY THE SOCIOECONOMIC CHARACTERISTICS AND THE TRAITS OF THE ÉLITE. IN NEW ZEALAND THE DESCRIBED PROCESS HAS TAKEN PLACE WITH A STEADY PACE AND A GOOD GRADE OF CONSEQUANTIALITY, IN LINE WTH THE REFORMS IN OTHER STATE DIVISIONS DRIVEN BY THE IDEAS OF THE NEW PUBLIC MANAGEMENT. CONTRARILY IN ENGLAND THE REFORMATIVE ACTION OF MARGARET THATCHER HAS ACQUIRED A VERY RADICAL CONNOTATION AS IT HAS BROUGHT INTO THE AMBIT OF HIGHER EDUCATION POLICY CONCEPTS LIKE EFFICIENCY, EXCELLENCE, RATIONALIZATION THAT WOULD CONTRAST WITH THE GENERALISTIC AND MASS-ORIENTED IDEAS THAT WERE FASHIONABLE DURING THE SEVENTIES. THE MISSION I INTEND TO ACCOMPLISH THORUGHOUT MY RESEARCH IS TO INVESTIGATE AND ANALYSE INTO MORE DEPTH THE DIFFERENCES THAT SEEM TO EMERGE FROM TWO CONTEXTS WHICH MOST OF THE LITERATURE REGARDS AS A SINGLE MODEL: THE ANGLO-SAXON MODEL. UNDER THIS LIGHT, THE DENSE ANALYSIS OF POLICY PROCESSES ALLOWED TO BRING OUT BOTH THE CONTROVERSIAL AND CONTRASTING ASPECTS OF THE TWO REALITIES COMPARED, AND THE ROLE AND WEIGHT OF VARIABLES SUCH AS IDEAS (MAIN VARIABLE), INSTITUTIONAL SETTINGS AND INDIVIDUAL INTERESTS ACTING IN EACH CONTEXT. THE CASES I MEAN TO ATTEND PRESENT PECULIAR ASPECTS WORTH DEVELOPING AN IN-DEPTH ANALYSIS, AN OUTLINE OF WHICH WILL BE PROVIDED IN THIS ABSTRACT. ENGLAND THE CONSERVATIVE GOVERNMENT, SINCE 1981, INTRODUCED RADICAL CHANGES IN THE SECTOR OF HIGHER EDUCATION: FIRST CUTTING DOWN ON STATE FUNDINGS AND THEN WITH THE CREATION OF AN INSTITUTION FOR THE PLANNING AND LEADERSHIP OF THE POLYTECHNICS (NON-UNIVERSITY SECTOR). AFTERWARDS THE SCHOOL REFORM BY MARGARET THATCHER IN 1988 RAISED TO A GREAT STIR ALL OVER EUROPE DUE TO BOTH ITS CONSIDERABLE INNOVATIVE IMPRINT AND THE STRONG ATTACK AGAINST THE PEDAGOGY OF THE ‘ACTIVE’ SCHOOLING AND PROGRESSIVE EDUCATION, UNTIL THEN RECOGNIZED AS A MERIT OF THE BRITISH PUBLIC SCHOOL. IN THE AMBIT OF UNIVERSITY EDUCATION THIS REFORM, TOGETHER WITH SIMILAR MEASURES BROUGHT IN DURING 1992, PUT INTO PRACTICE THE CONSERVATIVE PRINCIPLES THROUGH A SERIES OF ACTIONS THAT INCLUDED: THE SUPPRESSION OF THE IRREMOVABILITY PRINCIPLE FOR UNIVERSITY TEACHERS; THE INTRODUCTION OF STUDENT LOANS FOR LOW-INCOME STUDENTS AND THE CANCELLATION OF THE CLEAR DISTINCTION BETWEEN UNIVERSITIES AND POLYTECHNICS. THE POLICIES OF THE LABOUR MAJORITY OF MR BLAIR DID NOT QUITE DIVERGE FROM THE CONSERVATIVES’ POSITION. IN 2003 BLAIR’S CABINET RISKED TO BECOME A MINORITY RIGHT ON THE OCCASION OF AN IMPORTANT UNIVERSITY REFORM PROPOSAL. THIS PROPOSAL WOULD FORESEE THE AUTONOMY FOR THE UNIVERSITIES TO RAISE UP TO 3.000 POUNDS THE ENROLMENT FEES FOR STUDENTS (WHILE FORMERLY THE CEILING WAS 1.125 POUNDS). BLAIR HAD TO FACE INTERNAL OPPOSITION WITHIN HIS OWN PARTY IN RELATION TO A MEASURE THAT, ACCORDING TO THE 150 MPS PROMOTERS OF AN ADVERSE MOTION, HAD NOT BEEN INCLUDED IN THE ELECTORAL PROGRAMME AND WOULD RISK CREATING INCOME-BASED DISCRIMINATION AMONG STUDENTS. AS A MATTER OF FACT THE BILL FOCUSED ON THE INTRODUCTION OF VERY LOW-INTEREST STUDENT LOANS TO BE SETTLED ONLY WHEN THE STUDENT WOULD HAVE FOUND A REMUNERATED OCCUPATION (A SYSTEM ALREADY PROVIDED FOR BY THE AUSTRALIAN LEGISLATION). NEW ZEALAND CONTRARILY TO MANY OTHER COUNTRIES, NEW ZEALAND HAS ADOPTED A VERY WIDE VISION OF THE TERTIARY EDUCATION. IT INCLUDES IN FACT THE FULL EDUCATIONAL PROGRAMME THAT IS INTERNATIONALLY RECOGNIZED AS THE POST-SECONDARY EDUCATION. SHOULD WE SPOTLIGHT A PECULIARITY OF THE NEW ZEALAND TERTIARY EDUCATION POLICY THEN IT WOULD BE ‘CHANGE’. LOOKING AT THE REFORM HISTORY RELATED TO THE TERTIARY EDUCATION SYSTEM, WE CAN CLEARLY IDENTIFY FOUR ‘SUB-PERIODS’ FROM THE EIGHTIES TO PRESENT-DAY: 1. BEFORE THE 80S’: AN ELITARIAN SYSTEM CHARACTERIZED BY LOW PARTICIPATION RATES. 2. BETWEEN MID AND LATE 80S’: A TREND TOWARDS THE ENLARGEMENT OF PARTICIPATION ASSOCIATED TO A GREATER COMPETITION. 3. 1990-1999: A FUTHER STEP TOWARDS A COMPETITIVE MODEL BASED ON THE MARKET-ORIENTED SYSTEM. 4. FROM 2000 TO TODAY: A CONTINUOUS EVOLUTION TOWARDS A MORE COMPETITIVE MODEL BASED ON THE MARKET-ORIENTED SYSTEM TOGETHER WITH A GROWING ATTENTION TO STATE CONTROL FOR SOCIAL AND ECONOMIC DEVELOPMENT OF THE NATION. AT PRESENT THE GOVERNMENT OF NEW ZEALAND OPERATES TO STRENGHTHEN THIS PROCESS, PRIMARILY IN RELATION TO THE ROLE OF TERTIARY EDUCATION AS A STEADY FACTOR OF NATIONAL WALFARE, WHERE PROFESSIONAL DEVELOPMENT CONTRIBUTES ACTIVELY TO THE GROWTH OF THE NATIONAL ECONOMIC SYSTEM5. THE CASES OF ENGLAND AND NEW ZEALAND ARE THE FOCUS OF AN IN-DEPTH INVESTIGATION THAT STARTS FROM AN ANALYSIS OF THE POLICIES OF EACH NATION AND DEVELOP INTO A COMPARATIVE STUDY. AT THIS POINT I ATTEMPT TO DRAW SOME PRELIMINARY IMPRESSIONS ON THE FACTS ESSENTIALLY DECRIBED ABOVE. THE UNIVERSITY POLICIES IN ENGLAND AND NEW ZEALAND HAVE BOTH UNDERGONE A SIGNIFICANT REFORMATORY PROCESS SINCE THE EARLY EIGHTIES; IN BOTH CONTEXTS THE IMPORTANCE OF IDEAS THAT CONSTITUTED THE BASE OF POLITICS UNTIL 1980 WAS QUITE RELEVANT. GENERALLY SPEAKING, IN BOTH CASES THE PRE-REFORM POLICIES WERE INSPIRED BY EGALITARIANISM AND EXPANSION OF THE STUDENT POPULATION WHILE THOSE BROUGHT IN BY THE REFORM WOULD PURSUE EFFICIENCY, QUALITY AND COMPETITIVENESS. UNDOUBTEDLY, IN LINE WITH THIS GENERAL TENDENCY THAT REFLECTS THE HYPOTHESIS PROPOSED, THE TWO UNIVERSITY SYSTEMS PRESENT SEVERAL DIFFERENCES. THE UNIVERSITY SYSTEM IN NEW ZEALAND PROCEEDED STEADILY TOWARDS THE IMPLEMENTATION OF A MANAGERIAL CONCEPTION OF TERTIARY EDUCATION, ESPECIALLY FROM 1996 ONWARDS, IN ACCORDANCE WITH THE REFORMATORY PROCESS OF THE WHOLE PUBLIC SECTOR. IN THE UNITED KINGDOM, AS IN THE REST OF EUROPE, THE NEW APPROACH TO UNIVERSITY POLICY-MAKING HAD TO CONFRONT A DEEP-ROOTED TRADITION OF PROGRESSIVE EDUCATION AND THE IDEA OF EDUCATION EXPANSION THAT IN FACT DOMINATED UNTIL THE EIGHTIES. FROM THIS VIEW POINT THE GOVERNING ACTION OF MARGARET THATCHER GAVE RISE TO A RADICAL CHANGE THAT REVOLUTIONIZED THE OBJECTIVES AND KEY VALUES OF THE WHOLE EDUCATIONAL SYSTEM, IN PARTICULAR IN THE HIGHER EDUCATION SECTOR. IDEAS AS EFFICIENCY, EXCELLENCE AND CONTROL OF THE PERFORMANCE BECAME DECISIVE. THE LABOUR CABINETS OF BLAIR DEVELOPED IN THE WAKE OF CONSERVATIVE REFORMS. THIS APPEARS TO BE A FOCAL POINT OF THIS STUDY THAT OBSERVES HOW ALSO IN NEW ZEALAND THE REFORMING PROCESS OCCURRED TRANSVERSELY DURING PROGRESSIVE AND CONSERVATIVE ADMINISTRATIONS. THE PRELIMINARY IMPRESSION IS THEREFORE THAT IDEAS DEEPLY MARK THE REFORMATIVE PROCESSES: THE AIM OF MY RESEARCH IS TO VERIFY TO WHICH EXTENT THIS STATEMENT IS TRUE. IN ORDER TO BUILD A COMPREHENSIVE ANALYLIS, FURTHER SIGNIFICANT FACTORS WILL HAVE TO BE INVESTIGATED: THE WAY IDEAS ARE PERCEIVED AND IMPLEMENTED BY THE DIFFERENT POLITICAL ELITES; HOW THE VARIOUS SOCIOECONOMIC CONTEXTS INFLUENCE THE REFORMATIVE PROCESS; HOW THE INSTITUTIONAL STRUCTURES CONDITION THE POLICY-MAKING PROCESSES; WHETHER INDIVIDUAL INTERESTS PLAY A ROLE AND, IF YES, TO WHICH EXTENT.

Comparative Analysis of Alternative Hybrid Systems for Automotive Applications

The main objective of this work was to investigate the impact of different hybridization concepts and levels of hybridization on fuel economy of a standard road vehicle where both conventional and non-conventional hybrid architectures are treated exactly in the same way from the point of view of overall energy flow optimization. Hybrid component models were developed and presented in detail as well as the simulations results mainly for NEDC cycle. The analysis was performed on four different parallel hybrid powertrain concepts: Hybrid Electric Vehicle (HEV), High Speed Flywheel Hybrid Vehicle (HSF-HV), Hydraulic Hybrid Vehicle (HHV) and Pneumatic Hybrid Vehicle (PHV). In order to perform equitable analysis of different hybrid systems, comparison was performed also on the basis of the same usable system energy storage capacity (i.e. 625kJ for HEV, HSF and the HHV) but in the case of pneumatic hybrid systems maximal storage capacity was limited by the size of the systems in order to comply with the packaging requirements of the vehicle. The simulations were performed within the IAV Gmbh - VeLoDyn software simulator based on Matlab / Simulink software package. Advanced cycle independent control strategy (ECMS) was implemented into the hybrid supervisory control unit in order to solve power management problem for all hybrid powertrain solutions. In order to maintain State of Charge within desired boundaries during different cycles and to facilitate easy implementation and recalibration of the control strategy for very different hybrid systems, Charge Sustaining Algorithm was added into the ECMS framework. Also, a Variable Shift Pattern VSP-ECMS algorithm was proposed as an extension of ECMS capabilities so as to include gear selection into the determination of minimal (energy) cost function of the hybrid system. Further, cycle-based energetic analysis was performed in all the simulated cases, and the results have been reported in the corresponding chapters.

Quantum Correlations in Field Theory and Integrable Systems

In this thesis we will investigate some properties of one-dimensional quantum systems. From a theoretical point of view quantum models in one dimension are particularly interesting because they are strongly interacting, since particles cannot avoid each other in their motion, and you we can never ignore collisions. Yet, integrable models often generate new and non-trivial solutions, which could not be found perturbatively. In this dissertation we shall focus on two important aspects of integrable one- dimensional models: Their entanglement properties at equilibrium and their dynamical correlators after a quantum quench. The first part of the thesis will be therefore devoted to the study of the entanglement entropy in one- dimensional integrable systems, with a special focus on the XYZ spin-1/2 chain, which, in addition to being integrable, is also an interacting model. We will derive its Renyi entropies in the thermodynamic limit and its behaviour in different phases and for different values of the mass-gap will be analysed. In the second part of the thesis we will instead study the dynamics of correlators after a quantum quench , which represent a powerful tool to measure how perturbations and signals propagate through a quantum chain. The emphasis will be on the Transverse Field Ising Chain and the O(3) non-linear sigma model, which will be both studied by means of a semi-classical approach. Moreover in the last chapter we will demonstrate a general result about the dynamics of correlation functions of local observables after a quantum quench in integrable systems. In particular we will show that if there are not long-range interactions in the final Hamiltonian, then the dynamics of the model (non equal- time correlations) is described by the same statistical ensemble that describes its statical properties (equal-time correlations).

Biodegradable systems for the development of functional materials

This PhD work was aimed to design, develop, and characterize gelatin-based scaffolds, for the repair of defects in the muscle-skeletal system. Gelatin is a biopolymer widely used for pharmaceutical and medical applications, thanks to its biodegradability and biocompatibility. It is obtained from collagen via thermal denaturation or chemical-physical degradation. Despite its high potential as biomaterial, gelatin exhibits poor mechanical properties and a low resistance in aqueous environment. Crosslinking treatment and enrichment with reinforcement materials are thus required for biomedical applications. In this work, gelatin based scaffolds were prepared following three different strategies: films were prepared through the solvent casting method, electrospinning technique was applied for the preparation of porous mats, and 3D porous scaffolds were prepared through freeze-drying. The results obtained on films put into evidence the influence of pH, crosslinking and reinforcement with montmorillonite (MMT), on the structure, stability and mechanical properties of gelatin and MMT/gelatin composites. The information acquired on the effect of crosslinking in different conditions was utilized to optimize the preparation procedure of electrospun and freeze-dried scaffolds. A successful method was developed to prepare gelatin nanofibrous scaffolds electrospun from acetic acid/water solution and stabilized with a non-toxic crosslinking agent, genipin, able to preserve their original morphology after exposure to water. Moreover, the co-electrospinning technique was used to prepare nanofibrous scaffolds at variable content of gelatin and polylactic acid. Preliminary in vitro tests indicated that the scaffolds are suitable for cartilage tissue engineering, and that their potential applications can be extended to cartilage-bone interface tissue engineering. Finally, 3D porous gelatin scaffolds, enriched with calcium phosphate, were prepared with the freeze-drying method. The results indicated that the crystallinity of the inorganic phase influences porosity, interconnectivity and mechanical properties. Preliminary in vitro tests show good osteoblast response in terms of proliferation and adhesion on all the scaffolds.

Thermodynamic and mechanical properties of polymer-solvent systems

This work presents the results of theoretical and experimental characterization of thermodynamic, mechanical and transport properties in polymer solvent systems. The polymer solvent pairs considered ranged to those in which the polymer is rubbery, to those in which the initially glassy polymeric matrix is plasticized by the action of the low molecular weight species. Advanced Equation of State models have been adopted for thermodynamic modeling,along with a rigorous procedure that enables to extend their applicability to the non equilibrium, glassy region. Mass sorption kinetics had been modeled with phenomenological models and with advanced kinetic models.

Theoretical and Experimental Analysis of micro-CHP Energy Systems

In the framework of the micro-CHP (Combined Heat and Power) energy systems and the Distributed Generation (GD) concept, an Integrated Energy System (IES) able to meet the energy and thermal requirements of specific users, using different types of fuel to feed several micro-CHP energy sources, with the integration of electric generators of renewable energy sources (RES), electrical and thermal storage systems and the control system was conceived and built. A 5 kWel Polymer Electrolyte Membrane Fuel Cell (PEMFC) has been studied. Using experimental data obtained from various measurement campaign, the electrical and CHP PEMFC system performance have been determinate. The analysis of the effect of the water management of the anodic exhaust at variable FC loads has been carried out, and the purge process programming logic was optimized, leading also to the determination of the optimal flooding times by varying the AC FC power delivered by the cell. Furthermore, the degradation mechanisms of the PEMFC system, in particular due to the flooding of the anodic side, have been assessed using an algorithm that considers the FC like a black box, and it is able to determine the amount of not-reacted H2 and, therefore, the causes which produce that. Using experimental data that cover a two-year time span, the ageing suffered by the FC system has been tested and analyzed.

The role of biological processes in affecting the dynamics and fate of microplastics in coastal marine systems

Microplastics (MP) are omnipresent contaminants in the marine environment. Ingestion of MP has been reported for a wide range of marine biota, but to what extent the uptake by organisms affects the dynamics and fate of MP in the marine system has received little attention. My thesis explored this topic by integrating laboratory tests and experiments, field quantitative surveys of MP distribution and dynamics, and the use of specialised analytical techniques such as Attenuated-Total-Reflectance- (ATR) and imaging- Fourier Transformed Infrared Spectroscopy (FTIR). I compared different methodologies to extract MP from wild invertebrate specimens, and selected the use of potassium hydroxide (KOH) as the most cost-effective approach. I used this approach to analyse the MP contamination in various invertebrate species with different ecological traits from European salt marshes. I found that 96% of the analysed specimens (330) did not contain any MP. As preliminary environmental analyses showed high levels of environmental MP contamination, I hypothesised that most MP do not accumulate into organisms but are rather fast egested. I subsequently used laboratory multi-trophic experiments and a long-term field experiment using the filter-feeding mussel Mytilus galloprovincialis and the detritus feeding polychaete Hediste diversicolor to test the aforementioned hypothesis. Overall, results showed that MP are ingested but rapidly egested by marine invertebrates, which may limit MP transfer via predator-prey interactions but at the same time enhance their transfer via detrital pathways in the sediments. These processes seem to be extremely variable over time, with potential unexplored environmental consequences. This rapid dynamics also limits the conclusions that can be derived from static observations of MP contents in marine organisms, not fully capturing the real levels of potential contaminations by marine species. This emphasises the need to consider such dynamics in future work to measure the uptake rates by organisms in natural systems.

Design and Off-design modelling of advanced Power-to-Gas energy storage systems

Power-to-Gas storage systems have the potential to address grid-stability issues that arise when an increasing share of power is generated from sources that have a highly variable output. Although the proof-of-concept of these has been promising, the behaviour of the processes in off-design conditions is not easily predictable. The primary aim of this PhD project was to evaluate the performance of an original Power-to-Gas system, made up of innovative components. To achieve this, a numerical model has been developed to simulate the characteristics and the behaviour of the several components when the whole system is coupled with a renewable source. The developed model has been applied to a large variety of scenarios, evaluating the performance of the considered process and exploiting a limited amount of experimental data. The model has been then used to compare different Power-to-Gas concepts, in a real scenario of functioning. Several goals have been achieved. In the concept phase, the possibility to thermally integrate the high temperature components has been demonstrated. Then, the parameters that affect the energy performance of a Power-to-Gas system coupled with a renewable source have been identified, providing general recommendations on the design of hybrid systems; these parameters are: 1) the ratio between the storage system size and the renewable generator size; 2) the type of coupled renewable source; 3) the related production profile. Finally, from the results of the comparative analysis, it is highlighted that configurations with a highly oversized renewable source with respect to the storage system show the maximum achievable profit.

Low carbon systems for climate change mitigation and adaptation

Global warming and climate change have been among the most controversial topics after the industrial revolution. The main contributor to global warming is carbon dioxide (CO2), which increases the temperature by trapping heat in the atmosphere. Atmospheric CO2 concentration before the industrial era was around 280 ppm for a long period, while it has increased dramatically since the industrial revolution up to approximately 420 ppm. According to the Paris agreement it is needed to keep the temperature increase up to 2°C, preferably 1.5° C, to prevent reaching the tipping point of climate change. To keep the temperature increase below the range, it is required to find solutions to reduce CO2 emissions. The solutions can be low-carbon systems and transition from fossil fuels to renewable energy sources (RES). This thesis is allocated to the assessment of low-carbon systems and the reduction of CO2 by using RES instead of fossil fuels. One of the most important aspects to define the location and capacity of low-carbon systems is CO2 mass estimation. As mentioned, high-emission systems can be substituted by low-carbon systems. An example of high-emission systems is dredging. The global CO2 emission from dredging is relatively high which is associated with the growth of marine transport in addition to its high emission. Thus, ejectors system as alternative for dredging is investigated in chapter 2. For the transition from fossil fuels to RES, it is required to provide solutions for the RES storage problem. A solution could be zero-emission fuels such as hydrogen. However, the production of hydrogen requires electricity, and electricity production emits a large amount of CO2. Therefore, the last three chapters are allocated to hydrogen generation via electrolysis, at the current condition and scenarios of RES and variation of cell characteristics and stack materials, and its delivery.