Uniquitous internet middleware: architecture design and prototype evaluation

Technology advances in recent years have dramatically changed the way users exploit contents and services available on the Internet, by enforcing pervasive and mobile computing scenarios and enabling access to networked resources almost from everywhere, at anytime, and independently of the device in use. In addition, people increasingly require to customize their experience, by exploiting specific device capabilities and limitations, inherent features of the communication channel in use, and interaction paradigms that significantly differ from the traditional request/response one. So-called Ubiquitous Internet scenario calls for solutions that address many different challenges, such as device mobility, session management, content adaptation, context-awareness and the provisioning of multimodal interfaces. Moreover, new service opportunities demand simple and effective ways to integrate existing resources into new and value added applications, that can also undergo run-time modifications, according to ever-changing execution conditions. Despite service-oriented architectural models are gaining momentum to tame the increasing complexity of composing and orchestrating distributed and heterogeneous functionalities, existing solutions generally lack a unified approach and only provide support for specific Ubiquitous Internet aspects. Moreover, they usually target rather static scenarios and scarcely support the dynamic nature of pervasive access to Internet resources, that can make existing compositions soon become obsolete or inadequate, hence in need of reconfiguration. This thesis proposes a novel middleware approach to comprehensively deal with Ubiquitous Internet facets and assist in establishing innovative application scenarios. We claim that a truly viable ubiquity support infrastructure must neatly decouple distributed resources to integrate and push any kind of content-related logic outside its core layers, by keeping only management and coordination responsibilities. Furthermore, we promote an innovative, open, and dynamic resource composition model that allows to easily describe and enforce complex scenario requirements, and to suitably react to changes in the execution conditions.

Reliable Broadcasting and Streaming of Multimedia Content

This thesis is focused on the study of techniques that allow to have reliable transmission of multimedia content in streaming and broadcasting applications, targeting in particular video content. The design of efficient error-control mechanisms, to enhance video transmission systems reliability, has been addressed considering cross-layer and multi-layer/multi-dimensional channel coding techniques to cope with bit errors as well as packet erasures. Mechanisms for unequal time interleaving have been designed as a viable solution to reduce the impact of errors and erasures by acting on the time diversity of the data flow, thus enhancing robustness against correlated channel impairments. In order to account for the nature of the factors which affect the physical layer channel in the evaluation of FEC schemes performances, an ad-hoc error-event modeling has been devised. In addition, the impact of error correction/protection techniques on the quality perceived by the consumers of video services applications and techniques for objective/subjective quality evaluation have been studied. The applicability and value of the proposed techniques have been tested by considering practical constraints and requirements of real system implementations.

Effects of 2013 Cap reform on land market: regionalized farm payments and changes in farmers’ intended behaviour

The CAP reform process has been a central issue for agricultural economics research in recent years, and is gaining further attention in view of the post-2013 perspectives (Viaggi et al., 2010; Bartolini et al., 2011). Today the CAP is in the middle of a new reform process. Through the debate generated by the official proposals, published in October 2011 (COM(2011)625/3), the European Union (EU) engaged in a revision of the CAP ended on 26 June 2013 when a political agreement has been reached (IP/13/613, MEMO-13-621 and IP/13/864). In particular, in Italy the switch of the payment regime from historical to regional bases will take place. The underlying assumption is that the shift to regionalized payments changes the remuneration of inputs and has an impact on farmers’ allocation of fixed resources. In this context, farmers are expected to adjust their plans to the new policy environment as the regionalization of support is meant to create a change in incentives faced by farmers. The objective of this thesis is to provide an ex-ante analysis of the potential impact of the introduction of regionalized payments, within the post-2013 CAP reform, on the land market. Regionalized payments seem to produce differentiated effects and contribute to a general (slight) increase of land exchanges. The individual reaction to the new payments introduction would be different depending on location and specialization. These effects seem to be also strongly influenced by the difference in historical payments endowment and value, i.e. by the previous historical system of distribution of payments.

Development of methodologies supporting the sustainable and safe integration of offshore conventional and renewable energy production

Against a backdrop of rapidly increasing worldwide population and growing energy demand, the development of renewable energy technologies has become of primary importance in the effort to reduce greenhouse gas emissions. However, it is often technically and economically infeasible to transport discontinuous renewable electricity for long distances to the shore. Another shortcoming of non-programmable renewable power is its integration into the onshore grid without affecting the dispatching process. On the other hand, the offshore oil & gas industry is striving to reduce overall carbon footprint from onsite power generators and limiting large expenses associated to carrying electricity from remote offshore facilities. Furthermore, the increased complexity and expansion towards challenging areas of offshore hydrocarbons operations call for higher attention to safety and environmental protection issues from major accident hazards. Innovative hybrid energy systems, as Power-to-Gas (P2G), Power-to-Liquid (P2L) and Gas-to-Power (G2P) options, implemented at offshore locations, would offer the opportunity to overcome challenges of both renewable and oil & gas sectors. This study aims at the development of systematic methodologies based on proper sustainability and safety performance indicators supporting the choice of P2G, P2L and G2P hybrid energy options for offshore green projects in early design phases. An in-depth analysis of the different offshore hybrid strategies was performed. The literature reviews on existing methods proposing metrics to assess sustainability of hybrid energy systems, inherent safety of process routes in conceptual design stage and environmental protection of installations from oil and chemical accidental spills were carried out. To fill the gaps, a suite of specific decision-making methodologies was developed, based on representative multi-criteria indicators addressing technical, economic, environmental and societal aspects of alternative options. A set of five case-studies was defined, covering different offshore scenarios of concern, to provide an assessment of the effectiveness and value of the developed tools.

Optimization of an innovative T6 heat treatment for the AlSi10Mg alloy processed by Laser-based Powder Bed Fusion: effect on microstructure, mechanical properties, and tribological behavior

Laser-based Powder Bed Fusion (L-PBF) technology is one of the most commonly used metal Additive Manufacturing (AM) techniques to produce highly customized and value-added parts. The AlSi10Mg alloy has received more attention in the L-PBF process due to its good printability, high strength/weight ratio, corrosion resistance, and relatively low cost. However, a deep understanding of the effect of heat treatments on this alloy's metastable microstructure is still required for developing tailored heat treatments for the L-PBF AlSi10Mg alloy to overcome the limits of the as-built condition. Several authors have already investigated the effects of conventional heat treatment on the microstructure and mechanical behavior of the L-PBF AlSi10Mg alloy but often overlooked the peculiarities of the starting supersatured and ultrafine microstructure induced by rapid solidification. For this reason, the effects of innovative T6 heat treatment (T6R) on the microstructure and mechanical behavior of the L-PBF AlSi10Mg alloy were assessed. The short solution soaking time (10 min) and the relatively low temperature (510 °C) reduced the typical porosity growth at high temperatures and led to a homogeneous distribution of fine globular Si particles in the Al matrix. In addition, it increased the amount of Mg and Si in the solid solution available for precipitation hardening during the aging step. The mechanical (at room temperature and 200 °C) and tribological properties of the T6R alloy were evaluated and compared with other solutions, especially with an optimized direct-aged alloy (T5 alloy). Results showed that the innovative T6R alloy exhibits the best mechanical trade-off between strength and ductility, the highest fatigue strength among the analyzed conditions, and interesting tribological behavior. Furthermore, the high-temperature mechanical performances of the heat-treated L-PBF AlSi10Mg alloy make it suitable for structural components operating in mild service conditions at 200 °C.

Development of quantitative methods for sustainability assessment in process industry

The increasing aversion to technological risks of the society requires the development of inherently safer and environmentally friendlier processes, besides assuring the economic competitiveness of the industrial activities. The different forms of impact (e.g. environmental, economic and societal) are frequently characterized by conflicting reduction strategies and must be holistically taken into account in order to identify the optimal solutions in process design. Though the literature reports an extensive discussion of strategies and specific principles, quantitative assessment tools are required to identify the marginal improvements in alternative design options, to allow the trade-off among contradictory aspects and to prevent the “risk shift”. In the present work a set of integrated quantitative tools for design assessment (i.e. design support system) was developed. The tools were specifically dedicated to the implementation of sustainability and inherent safety in process and plant design activities, with respect to chemical and industrial processes in which substances dangerous for humans and environment are used or stored. The tools were mainly devoted to the application in the stages of “conceptual” and “basic design”, when the project is still open to changes (due to the large number of degrees of freedom) which may comprise of strategies to improve sustainability and inherent safety. The set of developed tools includes different phases of the design activities, all through the lifecycle of a project (inventories, process flow diagrams, preliminary plant lay-out plans). The development of such tools gives a substantial contribution to fill the present gap in the availability of sound supports for implementing safety and sustainability in early phases of process design. The proposed decision support system was based on the development of a set of leading key performance indicators (KPIs), which ensure the assessment of economic, societal and environmental impacts of a process (i.e. sustainability profile). The KPIs were based on impact models (also complex), but are easy and swift in the practical application. Their full evaluation is possible also starting from the limited data available during early process design. Innovative reference criteria were developed to compare and aggregate the KPIs on the basis of the actual sitespecific impact burden and the sustainability policy. Particular attention was devoted to the development of reliable criteria and tools for the assessment of inherent safety in different stages of the project lifecycle. The assessment follows an innovative approach in the analysis of inherent safety, based on both the calculation of the expected consequences of potential accidents and the evaluation of the hazards related to equipment. The methodology overrides several problems present in the previous methods proposed for quantitative inherent safety assessment (use of arbitrary indexes, subjective judgement, build-in assumptions, etc.). A specific procedure was defined for the assessment of the hazards related to the formations of undesired substances in chemical systems undergoing “out of control” conditions. In the assessment of layout plans, “ad hoc” tools were developed to account for the hazard of domino escalations and the safety economics. The effectiveness and value of the tools were demonstrated by the application to a large number of case studies concerning different kinds of design activities (choice of materials, design of the process, of the plant, of the layout) and different types of processes/plants (chemical industry, storage facilities, waste disposal). An experimental survey (analysis of the thermal stability of isomers of nitrobenzaldehyde) provided the input data necessary to demonstrate the method for inherent safety assessment of materials.

La governance dei rifiuti in Europa. Territori, conflitti e partecipazione

I rifiuti come oggetti impegnano tutte le istituzioni umane in una lotta di definizione del posto che occupano e quindi del valore che assumono. In tale dinamica la gestione dei rifiuti diventa un fatto sociale totale che coinvolge tutte le istituzioni umane in una lotta di definizione territorializzata. La storia del movimento ambientalista ci mostra come partendo dal disagio nei confronti dell’oggetto si è passati ad un disagio nei confronti delle idee che lo generano. Modernizzazione ecologica e modernizzazione democratica sembrano andare per un certo periodo d’accordo. Nei casi di conflittualità recente, e nello studio di caso approfondito di un piano provinciale della gestione rifiuti, il carattere anticipatore dell’attivismo ambientalista, sta rendendo sempre più costosi e incerti, investimenti e risultati strategici . Anche i principi delle politiche sono messi in discussione. La sostenibilità è da ricercare in una relativizzazione dei principi di policy e degli strumenti tecnici di valutazione (e.g. LCA) verso una maggiore partecipazione di tutti gli attori. Si propone un modello di governance che parta da un coordinamento amministrativo territoriale sulle reti logistiche, quindi un adeguamento geografico degli ATO, e un loro maggior ruolo nella gestione del processo di coordinamento e pianificazione. Azioni queste che devono a loro volta aprirsi ai flussi (ecologici ed economici) e ai loro attori di riferimento: dalle aziende multiutility agli ambientalisti. Infine è necessario un momento di controllo democratico che può avere una funzione arbitrale nei conflitti tra gli attori o di verifica. La ricerca si muove tra la storia e la filosofia, la ricerca empirica e la riflessione teorica. Sono state utilizzate anche tecniche di indagine attiva, come il focus group e l’intervista.

Development discourse in Romania: from Socialism to EU Membership

With their accession to the European Union, twelve new countries - Romania among them - (re)entered the international community of international donors. In the history of development aid this can be seen as a unique event: it is for the first time in history that such a large number of countries become international donors, with such short notice and in such a particular context that sees some scholars announcing the ‘death’ of development. But in spite of what might be claimed regarding the ‘end’ of the development era, development discourse seems to be rather vigorous and in good health: it is able to extert an undeniable force of attraction over the twelve countries that, in a matter of years, have already convinced themselves of its validity and adhered to its main tenets. This thesis collects evidence for improving our understanding of this process that sees the co-optation of twelve new countries to the dominant theory and practice of development cooperation. The evidence collected seems to show that one of the tools employed by the promoters of this co-optation process is that of constructing the ‘new’ Member States as ‘new’, inexpert donors that need to learn from the ‘old’ ones. By taking a case-study approach, this thesis gathers data that suggests that conceiving of the ‘twelve’ as ‘new’ donors is both historically inaccurate and value-ladden. On one hand, Romania’s case-study illustrates how in the (socialist) past at least one in the group of the twelve was particularly conversant in the discourse of international development. On the other hand, the process of co-optation, while being presented as a knowledgeproducing process, can also be seen as an ignorance-producing procedure: Romania, along with its fellow new Member States, takes the opportunity of ‘building its capacity’ and ‘raising its awareness’ of development cooperation along the line drawn by the European Union, but at the same time it seems to un-learn and ‘lower’ its awareness of development experience in the (socialist) past. This is one possible reading of this thesis. At a different level, this thesis can also be seen as an attempt to account of almost five decades of international development discourse in one specific country – Romania – in three different socio-political contexts: the socialist years (up to the year 1989), the ‘transition years’ (from 1989 to the pre-accession years) and the membership to the European Union. In this second reading, the thesis seeks to illustrate how – contrary to widespread beliefs – before 1989 Romania’s international development discourse was particularly vivid: in the most varied national and international settings President Ceausescu unfolded an extensive discursive activity on issues pertaining to international development; generous media coverage of affairs concerning the developing countries and their fight for development was the rule rather than the exception; the political leadership wanted the Romanians not only to be familiarized with (or ‘aware of’ to use current terminology) matters of underdevelopment, but also to prove a sense of solidarity with these countries, as well as a sense of pride for the relations of ‘mutual help’ that were being built with them; finally, international development was object of academic attention and the Romanian scholars were able not only to reflect on major developments, but could also formulate critical positions towards the practices of development aid. Very little remains of all this during the transition years, while in the present those who are engaged in matters pertaining to international development do so with a view of building Romania as an EU-compliant donor.

Capitale sociale e sistema del valore: Il caso del pesce azzurro in Puglia

The aim of my project is to find operational strategies for increasing the commercial exploitation of fish in Apulia region and to acquire a thorough knowledge of several important aspects of this system order to propose concrete, suitable and appropriate development tools. The plan is to analyze the impact that the socio-economic context has on blue fish systems of fishing and marketing in the various maritime regions. The sector of fishery is typified by a settled downward trend due to both communitarian policies driving towards a reduction of the fishery effort and to reduction of fishing resources. In the same time in Italy a increasing of costs (expecially fuel) and a reduction of market prices, because of the increasing of imports, are observed. Although a big part of Italian fishing fleet is to be referred to Apulia region, this dynamics are worsen, here, also because of market inefficiency and lack of integration and cooperation among fishermen. In this first part of my work I have investigated two areas that are relevant for regional fishery. On a first step I have evaluated fish amount for each kind of dealer working in each one of the two areas than, according to Porter's value chain analysis theory. Than i have applied the approach of value system to evaluate the value chains of the firm's supplier, the firm of fishery itself, and the firms distribution channels. Distribution of value has been resulted different but very unfavorable to fisherman in both investigated areas. The second step of my study has been the evaluation of the social capital value in both areas, defining the networks of fishery consistence and number of their mutual relationship. Results lay stress on a relation to an higher social capital value and a distribution of value system more profitable for fishermen.

Sistemi per la produzione di enzimi industriali finalizzati alla valorizzazione di scarti agroalimentari

La demolizione idrolitica delle pareti cellulari delle piante tramite enzimi lignocellulosici è quindi uno degli approcci più studiati della valorizzazione di scarti agricoli per il recupero di fitochimici di valore come secondary chemical building block per la chimica industriale. White rot fungi come il Pleurotus ostreatus producono una vasta gamma di enzimi extracellulari che degradano substrati lignocellulosici complessi in sostanze solubili per essere utilizzati come nutrienti. In questo lavoro abbiamo studiato la produzione di diversi tipi di enzimi lignocellulosici quali cellulase, xilanase, pectinase, laccase, perossidase e arylesterase (caffeoilesterase e feruloilesterase), indotte dalla crescita di Pleurotus ostreatus in fermentazione allo stato solido (SSF) di sottoprodotti agroalimentari (graspi d’uva, vinaccioli, lolla di riso, paglia di grano e crusca di grano) come substrati. Negli ultimi anni, SSF ha ricevuto sempre più interesse da parte dei ricercatori, dal momento che diversi studi per produzioni di enzimi, aromi, coloranti e altre sostanze di interesse per l' industria alimentare hanno dimostrato che SSF può dare rendimenti più elevati o migliorare le caratteristiche del prodotto rispetto alla fermentazione sommersa. L’utilizzo dei sottoprodotti agroalimentari come substrati nei processi SSF, fornisce una via alternativa e di valore, alternativa a questi residui altrimenti sotto/o non utilizzati. L'efficienza del processo di fermentazione è stato ulteriormente studiato attraverso trattamenti meccanici di estrusione del substrato , in grado di promuovere il recupero dell’enzima e di aumentare l'attività prodotta. Le attività enzimatiche prodotte dalla fermentazione sono strettamente dipendente della rimozione periodica degli enzimi prodotti. Le diverse matrici vegetali utilizzate hanno presentato diversi fenomeni induttivi delle specifiche attività enzimatiche. I processi SSF hanno dimostrato una buona capacità di produrre enzimi extracellulari in grado di essere utilizzati successivamente nei processi idrolitici di bioraffinazione per la valorizzazione dei prodotti agroalimentari.