Product placement e libertà di espressione

Object of the search is the advertising phenomenon of the "product placement", with reference to that it has been investigated legality’s limits, as well as the relationship with the constitutionally protected liberty of expression. Particularly, it has been analyzed, in first place, the problem of the relationship between the freedom of expression and the liberty of economic initiative, with particular reference to the different circles of guardianship to these prepared: or, larger, the one provided for the first from the 21th article of Costitution, more circumscribed, instead, the one established in the 41th article of Costitution, with reference to the second. This analysis has been made with the purpose to investigate the coordination among such liberties in those forms of communications that, for the proper peculiarities that characterize them, can be qualified, according to the concrete circumstances in which they are spread, so much forms of liberty of expression, how much exercise of an activity of enterprise. Under this last profile, it has been taken attention on the advertising activity and, specially, on the non transparent publicities, or not immediately perceivable as such from their receivers, and, therefore, in contrast with the advertising trasparence’s principle: or, the so-called cases of hidden publicity, what the editorial publicity, both "in narrow sense" both "in general sense", as well as the phenomenon of the product placement (or positioning of product), by now diffused in the commercial routine. Therefore, it has been proceeded to a complete and exhaustive examination of innovations introduced by the recent legislative discipline in subject of “planned placement of marks and products” in the cinema works, appraising, in the specific one, the effects, juridical and no juridical, consequential from the introduction of a first form of regulation of the phenomenon of the product placement and, particularly, from the express provision about the legality of the use to such advertising, if it has realized according to specific requirements or condition. In relationship to such profile, it has been also investigate limits (sub kind of normative gaps) from which the recently introduced discipline in subject would seem characterized. Finally, a further circle of investigation has concerned the possible organization of the phenomenon under a negotiate aspect, as particular contract of advertising, in which the object consists in an promotional activity. Concerning this, the experience of foreign countries (above all the Anglo-Saxon one) has been very important, because of the absence, in our arrangement, of a general normative discipline about advertising contracts. Consequently, I’ve investigated principal characteristics of similar contracts, in first place the atypicalness, because of the lack, in Italy, of a legislative discipline of this contract. Such investigation has also been developed through a comparation between the positioning of product and the other advertising contracts, among which, particularly, the sponsorship, as well as the contracts for the advertising exploitation of the name and other people's image, and, specially, the contract of testimonial and the contract of endorsement.

Development and characterization of a distributed measurement system for the evaluation of voltage quality in electric power networks

The research activity carried out during the PhD course in Electrical Engineering belongs to the branch of electric and electronic measurements. The main subject of the present thesis is a distributed measurement system to be installed in Medium Voltage power networks, as well as the method developed to analyze data acquired by the measurement system itself and to monitor power quality. In chapter 2 the increasing interest towards power quality in electrical systems is illustrated, by reporting the international research activity inherent to the problem and the relevant standards and guidelines emitted. The aspect of the quality of voltage provided by utilities and influenced by customers in the various points of a network came out only in recent years, in particular as a consequence of the energy market liberalization. Usually, the concept of quality of the delivered energy has been associated mostly to its continuity. Hence the reliability was the main characteristic to be ensured for power systems. Nowadays, the number and duration of interruptions are the “quality indicators” commonly perceived by most customers; for this reason, a short section is dedicated also to network reliability and its regulation. In this contest it should be noted that although the measurement system developed during the research activity belongs to the field of power quality evaluation systems, the information registered in real time by its remote stations can be used to improve the system reliability too. Given the vast scenario of power quality degrading phenomena that usually can occur in distribution networks, the study has been focused on electromagnetic transients affecting line voltages. The outcome of such a study has been the design and realization of a distributed measurement system which continuously monitor the phase signals in different points of a network, detect the occurrence of transients superposed to the fundamental steady state component and register the time of occurrence of such events. The data set is finally used to locate the source of the transient disturbance propagating along the network lines. Most of the oscillatory transients affecting line voltages are due to faults occurring in any point of the distribution system and have to be seen before protection equipment intervention. An important conclusion is that the method can improve the monitored network reliability, since the knowledge of the location of a fault allows the energy manager to reduce as much as possible both the area of the network to be disconnected for protection purposes and the time spent by technical staff to recover the abnormal condition and/or the damage. The part of the thesis presenting the results of such a study and activity is structured as follows: chapter 3 deals with the propagation of electromagnetic transients in power systems by defining characteristics and causes of the phenomena and briefly reporting the theory and approaches used to study transients propagation. Then the state of the art concerning methods to detect and locate faults in distribution networks is presented. Finally the attention is paid on the particular technique adopted for the same purpose during the thesis, and the methods developed on the basis of such approach. Chapter 4 reports the configuration of the distribution networks on which the fault location method has been applied by means of simulations as well as the results obtained case by case. In this way the performance featured by the location procedure firstly in ideal then in realistic operating conditions are tested. In chapter 5 the measurement system designed to implement the transients detection and fault location method is presented. The hardware belonging to the measurement chain of every acquisition channel in remote stations is described. Then, the global measurement system is characterized by considering the non ideal aspects of each device that can concur to the final combined uncertainty on the estimated position of the fault in the network under test. Finally, such parameter is computed according to the Guide to the Expression of Uncertainty in Measurements, by means of a numeric procedure. In the last chapter a device is described that has been designed and realized during the PhD activity aiming at substituting the commercial capacitive voltage divider belonging to the conditioning block of the measurement chain. Such a study has been carried out aiming at providing an alternative to the used transducer that could feature equivalent performance and lower cost. In this way, the economical impact of the investment associated to the whole measurement system would be significantly reduced, making the method application much more feasible.

Il passato nell’epoca della sua (ri)producibilità digitale. Torino 1943 - 45. Metodologia della ricerca con tecnologie informatiche. Sistema storico-territoriale di informazione multimediale

Se il lavoro dello storico è capire il passato come è stato compreso dalla gente che lo ha vissuto, allora forse non è azzardato pensare che sia anche necessario comunicare i risultati delle ricerche con strumenti propri che appartengono a un'epoca e che influenzano la mentalità di chi in quell'epoca vive. Emergenti tecnologie, specialmente nell’area della multimedialità come la realtà virtuale, permettono agli storici di comunicare l’esperienza del passato in più sensi. In che modo la storia collabora con le tecnologie informatiche soffermandosi sulla possibilità di fare ricostruzioni storiche virtuali, con relativi esempi e recensioni? Quello che maggiormente preoccupa gli storici è se una ricostruzione di un fatto passato vissuto attraverso la sua ricreazione in pixels sia un metodo di conoscenza della storia che possa essere considerato valido. Ovvero l'emozione che la navigazione in una realtà 3D può suscitare, è un mezzo in grado di trasmettere conoscenza? O forse l'idea che abbiamo del passato e del suo studio viene sottilmente cambiato nel momento in cui lo si divulga attraverso la grafica 3D? Da tempo però la disciplina ha cominciato a fare i conti con questa situazione, costretta soprattutto dall'invasività di questo tipo di media, dalla spettacolarizzazione del passato e da una divulgazione del passato parziale e antiscientifica. In un mondo post letterario bisogna cominciare a pensare che la cultura visuale nella quale siamo immersi sta cambiando il nostro rapporto con il passato: non per questo le conoscenze maturate fino ad oggi sono false, ma è necessario riconoscere che esiste più di una verità storica, a volte scritta a volte visuale. Il computer è diventato una piattaforma onnipresente per la rappresentazione e diffusione dell’informazione. I metodi di interazione e rappresentazione stanno evolvendo di continuo. Ed è su questi due binari che è si muove l’offerta delle tecnologie informatiche al servizio della storia. Lo scopo di questa tesi è proprio quello di esplorare, attraverso l’utilizzo e la sperimentazione di diversi strumenti e tecnologie informatiche, come si può raccontare efficacemente il passato attraverso oggetti tridimensionali e gli ambienti virtuali, e come, nel loro essere elementi caratterizzanti di comunicazione, in che modo possono collaborare, in questo caso particolare, con la disciplina storica. La presente ricerca ricostruisce alcune linee di storia delle principali fabbriche attive a Torino durante la seconda guerra mondiale, ricordando stretta relazione che esiste tra strutture ed individui e in questa città in particolare tra fabbrica e movimento operaio, è inevitabile addentrarsi nelle vicende del movimento operaio torinese che nel periodo della lotta di Liberazione in città fu un soggetto politico e sociale di primo rilievo. Nella città, intesa come entità biologica coinvolta nella guerra, la fabbrica (o le fabbriche) diventa il nucleo concettuale attraverso il quale leggere la città: sono le fabbriche gli obiettivi principali dei bombardamenti ed è nelle fabbriche che si combatte una guerra di liberazione tra classe operaia e autorità, di fabbrica e cittadine. La fabbrica diventa il luogo di "usurpazione del potere" di cui parla Weber, il palcoscenico in cui si tengono i diversi episodi della guerra: scioperi, deportazioni, occupazioni .... Il modello della città qui rappresentata non è una semplice visualizzazione ma un sistema informativo dove la realtà modellata è rappresentata da oggetti, che fanno da teatro allo svolgimento di avvenimenti con una precisa collocazione cronologica, al cui interno è possibile effettuare operazioni di selezione di render statici (immagini), di filmati precalcolati (animazioni) e di scenari navigabili interattivamente oltre ad attività di ricerca di fonti bibliografiche e commenti di studiosi segnatamente legati all'evento in oggetto. Obiettivo di questo lavoro è far interagire, attraverso diversi progetti, le discipline storiche e l’informatica, nelle diverse opportunità tecnologiche che questa presenta. Le possibilità di ricostruzione offerte dal 3D vengono così messe a servizio della ricerca, offrendo una visione integrale in grado di avvicinarci alla realtà dell’epoca presa in considerazione e convogliando in un’unica piattaforma espositiva tutti i risultati. Divulgazione Progetto Mappa Informativa Multimediale Torino 1945 Sul piano pratico il progetto prevede una interfaccia navigabile (tecnologia Flash) che rappresenti la pianta della città dell’epoca, attraverso la quale sia possibile avere una visione dei luoghi e dei tempi in cui la Liberazione prese forma, sia a livello concettuale, sia a livello pratico. Questo intreccio di coordinate nello spazio e nel tempo non solo migliora la comprensione dei fenomeni, ma crea un maggiore interesse sull’argomento attraverso l’utilizzo di strumenti divulgativi di grande efficacia (e appeal) senza perdere di vista la necessità di valicare le tesi storiche proponendosi come piattaforma didattica. Un tale contesto richiede uno studio approfondito degli eventi storici al fine di ricostruire con chiarezza una mappa della città che sia precisa sia topograficamente sia a livello di navigazione multimediale. La preparazione della cartina deve seguire gli standard del momento, perciò le soluzioni informatiche utilizzate sono quelle fornite da Adobe Illustrator per la realizzazione della topografia, e da Macromedia Flash per la creazione di un’interfaccia di navigazione. La base dei dati descrittivi è ovviamente consultabile essendo contenuta nel supporto media e totalmente annotata nella bibliografia. È il continuo evolvere delle tecnologie d'informazione e la massiccia diffusione dell’uso dei computer che ci porta a un cambiamento sostanziale nello studio e nell’apprendimento storico; le strutture accademiche e gli operatori economici hanno fatto propria la richiesta che giunge dall'utenza (insegnanti, studenti, operatori dei Beni Culturali) di una maggiore diffusione della conoscenza storica attraverso la sua rappresentazione informatizzata. Sul fronte didattico la ricostruzione di una realtà storica attraverso strumenti informatici consente anche ai non-storici di toccare con mano quelle che sono le problematiche della ricerca quali fonti mancanti, buchi della cronologia e valutazione della veridicità dei fatti attraverso prove. Le tecnologie informatiche permettono una visione completa, unitaria ed esauriente del passato, convogliando tutte le informazioni su un'unica piattaforma, permettendo anche a chi non è specializzato di comprendere immediatamente di cosa si parla. Il miglior libro di storia, per sua natura, non può farlo in quanto divide e organizza le notizie in modo diverso. In questo modo agli studenti viene data l'opportunità di apprendere tramite una rappresentazione diversa rispetto a quelle a cui sono abituati. La premessa centrale del progetto è che i risultati nell'apprendimento degli studenti possono essere migliorati se un concetto o un contenuto viene comunicato attraverso più canali di espressione, nel nostro caso attraverso un testo, immagini e un oggetto multimediale. Didattica La Conceria Fiorio è uno dei luoghi-simbolo della Resistenza torinese. Il progetto è una ricostruzione in realtà virtuale della Conceria Fiorio di Torino. La ricostruzione serve a arricchire la cultura storica sia a chi la produce, attraverso una ricerca accurata delle fonti, sia a chi può poi usufruirne, soprattutto i giovani, che, attratti dall’aspetto ludico della ricostruzione, apprendono con più facilità. La costruzione di un manufatto in 3D fornisce agli studenti le basi per riconoscere ed esprimere la giusta relazione fra il modello e l’oggetto storico. Le fasi di lavoro attraverso cui si è giunti alla ricostruzione in 3D della Conceria: . una ricerca storica approfondita, basata sulle fonti, che possono essere documenti degli archivi o scavi archeologici, fonti iconografiche, cartografiche, ecc.; . La modellazione degli edifici sulla base delle ricerche storiche, per fornire la struttura geometrica poligonale che permetta la navigazione tridimensionale; . La realizzazione, attraverso gli strumenti della computer graphic della navigazione in 3D. Unreal Technology è il nome dato al motore grafico utilizzato in numerosi videogiochi commerciali. Una delle caratteristiche fondamentali di tale prodotto è quella di avere uno strumento chiamato Unreal editor con cui è possibile costruire mondi virtuali, e che è quello utilizzato per questo progetto. UnrealEd (Ued) è il software per creare livelli per Unreal e i giochi basati sul motore di Unreal. E’ stata utilizzata la versione gratuita dell’editor. Il risultato finale del progetto è un ambiente virtuale navigabile raffigurante una ricostruzione accurata della Conceria Fiorio ai tempi della Resistenza. L’utente può visitare l’edificio e visualizzare informazioni specifiche su alcuni punti di interesse. La navigazione viene effettuata in prima persona, un processo di “spettacolarizzazione” degli ambienti visitati attraverso un arredamento consono permette all'utente una maggiore immersività rendendo l’ambiente più credibile e immediatamente codificabile. L’architettura Unreal Technology ha permesso di ottenere un buon risultato in un tempo brevissimo, senza che fossero necessari interventi di programmazione. Questo motore è, quindi, particolarmente adatto alla realizzazione rapida di prototipi di una discreta qualità, La presenza di un certo numero di bug lo rende, però, in parte inaffidabile. Utilizzare un editor da videogame per questa ricostruzione auspica la possibilità di un suo impiego nella didattica, quello che le simulazioni in 3D permettono nel caso specifico è di permettere agli studenti di sperimentare il lavoro della ricostruzione storica, con tutti i problemi che lo storico deve affrontare nel ricreare il passato. Questo lavoro vuole essere per gli storici una esperienza nella direzione della creazione di un repertorio espressivo più ampio, che includa gli ambienti tridimensionali. Il rischio di impiegare del tempo per imparare come funziona questa tecnologia per generare spazi virtuali rende scettici quanti si impegnano nell'insegnamento, ma le esperienze di progetti sviluppati, soprattutto all’estero, servono a capire che sono un buon investimento. Il fatto che una software house, che crea un videogame di grande successo di pubblico, includa nel suo prodotto, una serie di strumenti che consentano all'utente la creazione di mondi propri in cui giocare, è sintomatico che l'alfabetizzazione informatica degli utenti medi sta crescendo sempre più rapidamente e che l'utilizzo di un editor come Unreal Engine sarà in futuro una attività alla portata di un pubblico sempre più vasto. Questo ci mette nelle condizioni di progettare moduli di insegnamento più immersivi, in cui l'esperienza della ricerca e della ricostruzione del passato si intreccino con lo studio più tradizionale degli avvenimenti di una certa epoca. I mondi virtuali interattivi vengono spesso definiti come la forma culturale chiave del XXI secolo, come il cinema lo è stato per il XX. Lo scopo di questo lavoro è stato quello di suggerire che vi sono grosse opportunità per gli storici impiegando gli oggetti e le ambientazioni in 3D, e che essi devono coglierle. Si consideri il fatto che l’estetica abbia un effetto sull’epistemologia. O almeno sulla forma che i risultati delle ricerche storiche assumono nel momento in cui devono essere diffuse. Un’analisi storica fatta in maniera superficiale o con presupposti errati può comunque essere diffusa e avere credito in numerosi ambienti se diffusa con mezzi accattivanti e moderni. Ecco perchè non conviene seppellire un buon lavoro in qualche biblioteca, in attesa che qualcuno lo scopra. Ecco perchè gli storici non devono ignorare il 3D. La nostra capacità, come studiosi e studenti, di percepire idee ed orientamenti importanti dipende spesso dai metodi che impieghiamo per rappresentare i dati e l’evidenza. Perché gli storici possano ottenere il beneficio che il 3D porta con sè, tuttavia, devono sviluppare un’agenda di ricerca volta ad accertarsi che il 3D sostenga i loro obiettivi di ricercatori e insegnanti. Una ricostruzione storica può essere molto utile dal punto di vista educativo non sono da chi la visita ma, anche da chi la realizza. La fase di ricerca necessaria per la ricostruzione non può fare altro che aumentare il background culturale dello sviluppatore. Conclusioni La cosa più importante è stata la possibilità di fare esperienze nell’uso di mezzi di comunicazione di questo genere per raccontare e far conoscere il passato. Rovesciando il paradigma conoscitivo che avevo appreso negli studi umanistici, ho cercato di desumere quelle che potremo chiamare “leggi universali” dai dati oggettivi emersi da questi esperimenti. Da punto di vista epistemologico l’informatica, con la sua capacità di gestire masse impressionanti di dati, dà agli studiosi la possibilità di formulare delle ipotesi e poi accertarle o smentirle tramite ricostruzioni e simulazioni. Il mio lavoro è andato in questa direzione, cercando conoscere e usare strumenti attuali che nel futuro avranno sempre maggiore presenza nella comunicazione (anche scientifica) e che sono i mezzi di comunicazione d’eccellenza per determinate fasce d’età (adolescenti). Volendo spingere all’estremo i termini possiamo dire che la sfida che oggi la cultura visuale pone ai metodi tradizionali del fare storia è la stessa che Erodoto e Tucidide contrapposero ai narratori di miti e leggende. Prima di Erodoto esisteva il mito, che era un mezzo perfettamente adeguato per raccontare e dare significato al passato di una tribù o di una città. In un mondo post letterario la nostra conoscenza del passato sta sottilmente mutando nel momento in cui lo vediamo rappresentato da pixel o quando le informazioni scaturiscono non da sole, ma grazie all’interattività con il mezzo. La nostra capacità come studiosi e studenti di percepire idee ed orientamenti importanti dipende spesso dai metodi che impieghiamo per rappresentare i dati e l’evidenza. Perché gli storici possano ottenere il beneficio sottinteso al 3D, tuttavia, devono sviluppare un’agenda di ricerca volta ad accertarsi che il 3D sostenga i loro obiettivi di ricercatori e insegnanti. Le esperienze raccolte nelle pagine precedenti ci portano a pensare che in un futuro non troppo lontano uno strumento come il computer sarà l’unico mezzo attraverso cui trasmettere conoscenze, e dal punto di vista didattico la sua interattività consente coinvolgimento negli studenti come nessun altro mezzo di comunicazione moderno.

Per un museo virtuale dell'informatica. Un supporto automatico per creare "visite museali"

The subject of the present research is related to the field of computer technology applied to support intellectual activities such as text translation, screenwriting and content organization of popular and education courses, especially concerning museum visits. The research has started with the deep analysis of the cognitive process which characterizes a screenwriter while working. This choice has been made because a screenplay is not only an aid to the realization of a show but, more in general, it can be considered as the planning of an education, popular and formative intellectual activity. After this analysis, the research has focused on the specific area of the planning, description and introduction of topics related to the history of science, and in particular, of computer science. To focus on this area it has been fundamental to analyse subjects concerning the didactics of museum visits organization. The aim was to find out the guide lines that a teacher should follow when planning the visit of a museum (virtual museum of the history of computer science). The consequent designing and realisation of an automatic support system for the description and the production of a formative, education and popular multimedia product (for the history of computer science), has been possible thanks to the results achieved through this research. The system obtained is provided by the following features: ·management of multimedia slides (such as texts, video, audio or images) which can be classified on the bases of the topic and of the profile of the user; ·automatic creation of a sequence of multimedia slides which introduce the topic; ·management of the interaction with the user to check and give validity to the product. The most innovative aspect of the present research is represented by the fact that the product is realised on the bases of the profile of the user.

Max Bill in Italia . Lo spazio logico dell'architettura

I Max Bill is an intense giornata of a big fresco. An analysis of the main social, artistic and cultural events throughout the twentieth century is needed in order to trace his career through his masterpieces and architectures. Some of the faces of this hypothetical mural painting are, among others, Le Corbusier, Walter Gropius, Ernesto Nathan Rogers, Kandinskij, Klee, Mondrian, Vatongerloo, Ignazio Silone, while the backcloth is given by artistic avant-gardes, Bauhaus, International Exhibitions, CIAM, war events, reconstruction, Milan Triennali, Venice Biennali, the School of Ulm. Architect, even though more known as painter, sculptor, designer and graphic artist, Max Bill attends the Bauhaus as a student in the years 1927-1929, and from this experience derives the main features of a rational, objective, constructive and non figurative art. His research is devoted to give his art a scientific methodology: each work proceeds from the analysis of a problem to the logical and always verifiable solution of the same problem. By means of composition elements (such as rhythm, seriality, theme and its variation, harmony and dissonance), he faces, with consistent results, themes apparently very distant from each other as the project for the H.f.G. or the design for a font. Mathematics are a constant reference frame as field of certainties, order, objectivity: ‘for Bill mathematics are never confined to a simple function: they represent a climate of spiritual certainties, and also the theme of non attempted in its purest state, objectivity of the sign and of the geometrical place, and at the same time restlessness of the infinity: Limited and Unlimited ’. In almost sixty years of activity, experiencing all artistic fields, Max Bill works, projects, designs, holds conferences and exhibitions in Europe, Asia and Americas, confronting himself with the most influencing personalities of the twentieth century. In such a vast scenery, the need to limit the investigation field combined with the necessity to address and analyse the unpublished and original aspect of Bill’s relations with Italy. The original contribution of the present research regards this particular ‘geographic delimitation’; in particular, beyond the deep cultural exchanges between Bill and a series of Milanese architects, most of all with Rogers, two main projects have been addressed: the realtà nuova at Milan Triennale in 1947, and the Contemporary Art Museum in Florence in 1980. It is important to note that these projects have not been previously investigated, and the former never appears in the sources either. These works, together with the most well-known ones, such as the projects for the VI and IX Triennale, and the Swiss pavilion for the Biennale, add important details to the reference frame of the relations which took place between Zurich and Milan. Most of the occasions for exchanges took part in between the Thirties and the Fifties, years during which Bill underwent a significant period of artistic growth. He meets the Swiss progressive architects and the Paris artists from the Abstraction-Création movement, enters the CIAM, collaborates with Le Corbusier to the third volume of his Complete Works, and in Milan he works and gets confronted with the events related to post-war reconstruction. In these years Bill defines his own working methodology, attaining an artistic maturity in his work. The present research investigates the mentioned time period, despite some necessary exceptions. II The official Max Bill bibliography is naturally wide, including spreading works along with ones more devoted to analytical investigation, mainly written in German and often translated into French and English (Max Bill himself published his works in three languages). Few works have been published in Italian and, excluding the catalogue of the Parma exhibition from 1977, they cannot be considered comprehensive. Many publications are exhibition catalogues, some of which include essays written by Max Bill himself, some others bring Bill’s comments in a educational-pedagogical approach, to accompany the observer towards a full understanding of the composition processes of his art works. Bill also left a great amount of theoretical speculations to encourage a critical reading of his works in the form of books edited or written by him, and essays published in ‘Werk’, magazine of the Swiss Werkbund, and other international reviews, among which Domus and Casabella. These three reviews have been important tools of analysis, since they include tracks of some of Max Bill’s architectural works. The architectural aspect is less investigated than the plastic and pictorial ones in all the main reference manuals on the subject: Benevolo, Tafuri and Dal Co, Frampton, Allenspach consider Max Bill as an artist proceeding in his work from Bauhaus in the Ulm experience . A first filing of his works was published in 2004 in the monographic issue of the Spanish magazine 2G, together with critical essays by Karin Gimmi, Stanislaus von Moos, Arthur Rüegg and Hans Frei, and in ‘Konkrete Architektur?’, again by Hans Frei. Moreover, the monographic essay on the Atelier Haus building by Arthur Rüegg from 1997, and the DPA 17 issue of the Catalonia Polytechnic with contributions of Carlos Martì, Bruno Reichlin and Ton Salvadò, the latter publication concentrating on a few Bill’s themes and architectures. An urge to studying and going in depth in Max Bill’s works was marked in 2008 by the centenary of his birth and by a recent rediscovery of Bill as initiator of the ‘minimalist’ tradition in Swiss architecture. Bill’s heirs are both very active in promoting exhibitions, researching and publishing. Jakob Bill, Max Bill’s son and painter himself, recently published a work on Bill’s experience in Bauhaus, and earlier on he had published an in-depth study on ‘Endless Ribbons’ sculptures. Angela Thomas Schmid, Bill’s wife and art historian, published in end 2008 the first volume of a biography on Max Bill and, together with the film maker Eric Schmid, produced a documentary film which was also presented at the last Locarno Film Festival. Both biography and documentary concentrate on Max Bill’s political involvement, from antifascism and 1968 protest movements to Bill experiences as Zurich Municipality councilman and member of the Swiss Confederation Parliament. In the present research, the bibliography includes also direct sources, such as interviews and original materials in the form of letters correspondence and graphic works together with related essays, kept in the max+binia+jakob bill stiftung archive in Zurich. III The results of the present research are organized into four main chapters, each of them subdivided into four parts. The first chapter concentrates on the research field, reasons, tools and methodologies employed, whereas the second one consists of a short biographical note organized by topics, introducing the subject of the research. The third chapter, which includes unpublished events, traces the historical and cultural frame with particular reference to the relations between Max Bill and the Italian scene, especially Milan and the architects Rogers and Baldessari around the Fifties, searching the themes and the keys for interpretation of Bill’s architectures and investigating the critical debate on the reviews and the plastic survey through sculpture. The fourth and last chapter examines four main architectures chosen on a geographical basis, all devoted to exhibition spaces, investigating Max Bill’s composition process related to the pictorial field. Paintings has surely been easier and faster to investigate and verify than the building field. A doctoral thesis discussed in Lausanne in 1977 investigating Max Bill’s plastic and pictorial works, provided a series of devices which were corrected and adapted for the definition of the interpretation grid for the composition structures of Bill’s main architectures. Four different tools are employed in the investigation of each work: a context analysis related to chapter three results; a specific theoretical essay by Max Bill briefly explaining his main theses, even though not directly linked to the very same work of art considered; the interpretation grid for the composition themes derived from a related pictorial work; the architecture drawing and digital three-dimensional model. The double analysis of the architectural and pictorial fields is functional to underlining the relation among the different elements of the composition process; the two fields, however, cannot be compared and they stay, in Max Bill’s works as in the present research, interdependent though self-sufficient. IV An important aspect of Max Bill production is self-referentiality: talking of Max Bill, also through Max Bill, as a need for coherence instead of a method limitation. Ernesto Nathan Rogers describes Bill as the last humanist, and his horizon is the known world but, as the ‘Concrete Art’ of which he is one of the main representatives, his production justifies itself: Max Bill not only found a method, but he autonomously re-wrote the ‘rules of the game’, derived timeless theoretical principles and verified them through a rich and interdisciplinary artistic production. The most recurrent words in the present research work are synthesis, unity, space and logic. These terms are part of Max Bill’s vocabulary and can be referred to his works. Similarly, graphic settings or analytical schemes in this research text referring to or commenting Bill’s architectural projects were drawn up keeping in mind the concise precision of his architectural design. As for Mies van der Rohe, it has been written that Max Bill took art to ‘zero degree’ reaching in this way a high complexity. His works are a synthesis of art: they conceptually encompass all previous and –considered their developments- most of contemporary pictures. Contents and message are generally explicitly declared in the title or in Bill’s essays on his artistic works and architectural projects: the beneficiary is invited to go through and re-build the process of synthesis generating the shape. In the course of the interview with the Milan artist Getulio Alviani, he tells how he would not write more than a page for an essay on Josef Albers: everything was already evident ‘on the surface’ and any additional sentence would be redundant. Two years after that interview, these pages attempt to decompose and single out the elements and processes connected with some of Max Bill’s works which, for their own origin, already contain all possible explanations and interpretations. The formal reduction in favour of contents maximization is, perhaps, Max Bill’s main lesson.

Rafael Moneo: la complessità del vuoto. Dalle matrici formali dell'opera di Oteiza e Chillida

The experience of void, essential to the production of forms and to make use them, can be considered as the base of the activities that attend to the formative processes. If void and matter constitutes the basic substances of architecture. Their role in the definition of form, the symbolic value and the constructive methods of it defines the quality of the space. This job inquires the character of space in the architecture of Moneo interpreting the meaning of the void in the Basque culture through the reading of the form matrices in the work of Jorge Oteiza and Eduardo Chillida. In the tie with the Basque culture a reading key is characterized by concurring to put in relation some of the theoretical principles expressed by Moneo on the relationship between place and time, in an unique and specific vision of the space. In the analysis of the process that determines the genesis of the architecture of Moneo emerges a trajectory whose direction is constructed on two pivos: on the one hand architecture like instrument of appropriation of the place, gushed from an acquaintance process who leans itself to the reading of the relations that define the place and of the resonances through which measuring it, on the other hand the architecture whose character is able to represent and to extend the time in which he is conceived, through the autonomy that is conferred to them from values. Following the trace characterized from this hypothesis, that is supported on the theories elaborated from Moneo, surveying deepens the reading of the principles that construct the sculptural work of Oteiza and Chillida, features from a search around the topic of the void and to its expression through the form. It is instrumental to the definition of a specific area that concurs to interpret the character of the space subtended to a vision of the place and the time, affine to the sensibility of Moneo and in some way not stranger to its cultural formation. The years of the academic formation, during which Moneo enters in contact with the Basque artistic culture, seem to be an important period in the birth of that knowledge that will leads him to the formulation of theories tied to the relationship between time, place and architecture. The values expressed through the experimental work of Oteiza and Chillida during years '50 are valid bases to the understanding of such relationships. In tracing a profile of the figures of Oteiza and Chillida, without the pretension that it is exhaustive for the reading of the complex historical period in which they are placed, but with the needs to put the work in a context, I want to be evidenced the important role carried out from the two artists from the Basque cultural area within which Moneo moves its first steps. The tie that approaches Moneo to the Basque culture following the personal trajectory of the formative experience interlaces to that one of important figures of the art and the Spanish architecture. One of the more meaningful relationships is born just during the years of his academic formation, from 1958 to the 1961, when he works like student in the professional office of the architect Francisco Sáenz de Oiza, who was teaching architectural design at the ETSAM. In these years many figures of Basque artists alternated at the professional office of Oiza that enjoys the important support of the manufacturer and maecenas Juan Huarte Beaumont, introduced to he from Oteiza. The tie between Huarte and Oteiza is solid and continuous in the years and it realizes in a contribution to many of the initiatives that makes of Oteiza a forwarder of the Basque culture. In the four years of collaboration with Oiza, Moneo has the opportunity to keep in contact with an atmosphere permeated by a constant search in the field of the plastic art and with figures directly connected to such atmosphere. It’s of a period of great intensity as in the production like in the promotion of the Basque art. The collective “Blanco y Negro”, than is held in 1959 at the Galería Darro to Madrid, is only one of the many times of an exhibition of the work of Oteiza and Chillida. The end of the Fifties is a period of international acknowledgment for Chillida that for Oteiza. The decade of the Fifties consecrates the hypotheses of a mythical past of the Basque people through the spread of the studies carried out in the antecedent years. The archaeological discoveries that join to a context already rich of signs of the prehistoric era, consolidate the knowledge of a strong cultural identity. Oteiza, like Chillida and other contemporary artists, believe in a cosmogonist conception belonging to the Basques, connected to their matriarchal mythological past. The void in its meaning of absence, in the Basque culture, thus as in various archaic and oriental religions, is equivalent to the spiritual fullness as essential condition to the revealing of essence. Retracing the archaic origins of the Basque culture emerges the deep meaning that the void assumes as key element in the religious interpretation of the passage from the life to the death. The symbology becomes rich of meaningful characters who derive from the fact that it is a chthonic cult. A representation of earth like place in which divine manifest itself but also like connection between divine and human, and this manipulation of the matter of which the earth it is composed is the tangible projection of the continuous search of the man towards God. The search of equilibrium between empty and full, that characterizes also the development of the form in architecture, in the Basque culture assumes therefore a peculiar value that returns like constant in great part of the plastic expressions, than in this context seem to be privileged regarding the other expressive forms. Oteiza and Chillida develop two original points of view in the representation of the void through the form. Both use of rigorous systems of rules sensitive to the physics principles and the characters of the matter. The last aim of the Oteiza’s construction is the void like limit of the knowledge, like border between known and unknown. It doesn’t means to reduce the sculptural object to an only allusive dimension because the void as physical and spiritual power is an active void, that possesses that value able to reveal the being through the trace of un-being. The void in its transcendental manifestation acts at the same time from universal and from particular, like in the atomic structure of the matter, in which on one side it constitutes the inner structure of every atom and on the other one it is necessary condition to the interaction between all the atoms. The void can be seen therefore as the action field that concurs the relations between the forms but is also the necessary condition to the same existence of the form. In the construction of Chillida the void represents that counterpart structuring the matter, inborn in it, the element in absence of which wouldn’t be variations neither distinctive characters to define the phenomenal variety of the world. The physics laws become the subject of the sculptural representation, the void are the instrument that concurs to catch up the equilibrium. Chillida dedicate himself to experience the space through the senses, to perceive of the qualities, to tell the physics laws which forge the matter in the form and the form arranges the places. From the artistic experience of the two sculptors they can be transposed, to the architectonic work of Moneo, those matrices on which they have constructed their original lyric expressions, where the void is absolute protagonist. An ambit is defined thus within which the matrices form them drafts from the work of Oteiza and Chillida can be traced in the definition of the process of birth and construction of the architecture of Moneo, but also in the relation that the architecture establishes with the place and in the time. The void becomes instrument to read the space constructed in its relationships that determine the proportions, rhythms, and relations. In this way the void concurs to interpret the architectonic space and to read the value of it, the quality of the spaces constructing it. This because it’s like an instrument of the composition, whose role is to maintain to the separation between the elements putting in evidence the field of relations. The void is that instrument that serves to characterize the elements that are with in the composition, related between each other, but distinguished. The meaning of the void therefore pushes the interpretation of the architectonic composition on the game of the relations between the elements that, independent and distinguished, strengthen themselves in their identity. On the one hand if void, as measurable reality, concurs all the dimensional changes quantifying the relationships between the parts, on the other hand its dialectic connotation concurs to search the equilibrium that regulated such variations. Equilibrium that therefore does not represent an obtained state applying criteria setting up from arbitrary rules but that depends from the intimate nature of the matter and its embodiment in the form. The production of a form, or a formal system that can be finalized to the construction of a building, is indissolubly tied to the technique that is based on the acquaintance of the formal vocation of the matter, and what it also can representing, meaning, expresses itself in characterizing the site. For Moneo, in fact, the space defined from the architecture is above all a site, because the essence of the site is based on the construction. When Moneo speaks about “birth of the idea of plan” like essential moment in the construction process of the architecture, it refers to a process whose complexity cannot be born other than from a deepened acquaintance of the site that leads to the comprehension of its specificity. Specificity arise from the infinite sum of relations, than for Moneo is the story of the oneness of a site, of its history, of the cultural identity and of the dimensional characters that that they are tied to it beyond that to the physical characteristics of the site. This vision is leaned to a solid made physical structure of perceptions, of distances, guideline and references that then make that the process is first of all acquaintance, appropriation. Appropriation that however does not happen for directed consequence because does not exist a relationship of cause and effect between place and architecture, thus as an univocal and exclusive way does not exist to arrive to a representation of an idea. An approach that, through the construction of the place where the architecture acquires its being, searches an expression of its sense of the truth. The proposal of a distinction for areas like space, matter, spirit and time, answering to the issues that scan the topics of the planning search of Moneo, concurs a more immediate reading of the systems subtended to the composition principles, through which is related the recurrent architectonic elements in its planning dictionary. From the dialectic between the opposites that is expressed in the duality of the form, through the definition of a complex element that can mediate between inside and outside as a real system of exchange, Moneo experiences the form development of the building deepening the relations that the volume establishes in the site. From time to time the invention of a system used to answer to the needs of the program and to resolve the dual character of the construction in an only gesture, involves a deep acquaintance of the professional practice. The technical aspect is the essential support to which the construction of the system is indissolubly tied. What therefore arouses interest is the search of the criteria and the way to construct that can reveal essential aspects of the being of the things. The constructive process demands, in fact, the acquaintance of the formative properties of the matter. Property from which the reflections gush on the relations that can be born around the architecture through the resonance produced from the forms. The void, in fact, through the form is in a position to constructing the site establishing a reciprocity relation. A reciprocity that is determined in the game between empty and full and of the forms between each other, regarding around, but also with regard to the subjective experience. The construction of a background used to amplify what is arranged on it and to clearly show the relations between the parts and at the same time able to tie itself with around opening the space of the vision, is a system that in the architecture of Moneo has one of its more effective applications in the use of the platform used like architectonic element. The spiritual force of this architectonic gesture is in the ability to define a place whose projecting intention is perceived and shared with who experience and has lived like some instrument to contact the cosmic forces, in a delicate process that lead to the equilibrium with them, but in completely physical way. The principles subtended to the construction of the form taken from the study of the void and the relations that it concurs, lead to express human values in the construction of the site. The validity of these principles however is tested from the time. The time is what Moneo considers as filter that every architecture is subordinate to and the survival of architecture, or any of its formal characters, reveals them the validity of the principles that have determined it. It manifests thus, in the tie between the spatial and spiritual dimension, between the material and the worldly dimension, the state of necessity that leads, in the construction of the architecture, to establish a contact with the forces of the universe and the intimate world, through a process that translate that necessity in elaboration of a formal system.

I progetti di Oswald Mathias Ungers per la città di Treviri. Questioni di composizione architettonica

Abstract This PhD thesis focuses on two projects carried out by Oswald Mathias Ungers in the city of Trier. More specifi cally, this study focuses on the relationship between composition principles, architectural forms, historical context and the nature of the city where these buildings have been built. The works carried out by Ungers in Trier are unique experiences - if taken in this master’s works context - and each one of them refl ects - in its specifi c project and architectural composition theme - the results - in terms of design - of a complex research on the fundamentals of architecture carried out by Ungers in more than fi ve decades of his activity. The theoretical and compositional experiment aspect is one of the main subjects to defi ne these buildings in terms of architecture. This aspect is so crucial that it is possible to consider them as an example of radical and specifi c experiences, referred to a specifi c place and based on a specifi c theoretical corpus. More specifi cally, this study focuses on the design activity carried out by Ungers in this city, mainly between the 80s and 90s and in the fi rst decade of the 21st century. It puts forward an interpretation that does not only defi ne the essential features, elements and questions lying behind these two architectures, but fi rst and foremost analyzes the theoretical, methodological and compositional relationship between Ungers and Trier, his adopted city. An increasingly closer relationship between the architect and his city highlights the wider relationship network established between the place and the projects carried out by Ungers in this city and makes it possible to understand the importance of Trier in the work of this architect, in his education and in his way to see, think and make architecture. The projects analyzed - the Thermen am Forum Museum (1988-1996) and the Kaiserthermen entrance hall (2003-2007) - were analyzed in terms of their architectural composition in an attempt to highlight the poetry of these architectures and to fi nd out their progressive, rational - and therefore transmissible - character. This study is an attempt to assess and unveil the compositional themes characterizing these projects while detecting the compositional principles lying behind the works and verifying the design process through which such principles were translated into architecture. Looking at these works as architectural composition examples makes it possible to clarify Ungers’ hermeneutic relationship established with the city’s history and structure. More specifi cally, the main subject of this thesis is the relationship between the architect, his city and history in the architectural solutions offered by two exemplary case studies, which were both built and placed in the historical city center of Trier and both connected with the ancient core of the city. The Thermen am Forum Museum and the Kaiserthermen entrance hall projects are - though being developed at different times of Ungers’ architectural life and though being extremely different in terms of approach to their context, due to their architectural image - two works that can be compared with the historical heritage of the city and this makes them ideal examples of the relationship between architectural forms, history and environment.

Equine and human mutual welfare: a whole subject? Critical aspects and possible strategies in equine-assisted activities and therapies

General aim of the study is equine welfare, particularly concerning different husbandry methodic and inter-specific relational factors. Specific aim is the evaluation of possible mutual (to humans and to equines) benefits and the analysis of critical factors/strength points, of human-horse relationship within Therapeutic Riding context (TR). The peculiarities of human-horse relationship (compared to the bond with “Pet”) are analyzed, concerning their socio-anthropological, psychological, psycho-dynamic distinctive characteristics. 8 European representative therapeutic riding centers (TRC) were therefore selected (on the basis of their different animals’ husbandry criteria, and of the different rehabilitative methodologies adopted). TRC were investigated through 2 different questionnaires, specifically settled to access objective/subjective animal welfare parameters; the quality of human-horse relationship; technicians’ emotional experienced. 3 Centers were further selected, and behavioral (145 hours of behavioral recording) and physiological parameters (heart rate and heart rate variability) were evaluated, aimed to access equine welfare and horses’ adaptive responses/coping (towards general environment and towards TR job). Moreover a specific “handling-task” was ideated and experimented, aimed to measure the quality of TR technicians-horses relationship. We did therefore evaluate both the individual horses’ responses and the possible differences among Centers. Data collected highlight the lack of univocal standardized methodic, concerning the general animals’ management and the specific methodologies (aimed to improve animal welfare and to empower TR efficacy). Some positive and some critical aspects were detected concerning TR personnel-horse relationship. Another experimental approach did evaluate the efficacy (concerning the mutual benefits’ empowerment) of an “ethologically-fitted” TR intervention, aimed to educate children to and through the relationship with horses. Our data evidenced that the improvement of human horse relationship, through structured educational programs for TR personnel might have important consequences both to human and equine welfare.

Subject-specific musculoskeletal models of the lower limbs for the prediction of skeletal loads during motion

The determination of skeletal loading conditions in vivo and their relationship to the health of bone tissues, remain an open question. Computational modeling of the musculoskeletal system is the only practicable method providing a valuable approach to muscle and joint loading analyses, although crucial shortcomings limit the translation process of computational methods into the orthopedic and neurological practice. A growing attention focused on subject-specific modeling, particularly when pathological musculoskeletal conditions need to be studied. Nevertheless, subject-specific data cannot be always collected in the research and clinical practice, and there is a lack of efficient methods and frameworks for building models and incorporating them in simulations of motion. The overall aim of the present PhD thesis was to introduce improvements to the state-of-the-art musculoskeletal modeling for the prediction of physiological muscle and joint loads during motion. A threefold goal was articulated as follows: (i) develop state-of-the art subject-specific models and analyze skeletal load predictions; (ii) analyze the sensitivity of model predictions to relevant musculotendon model parameters and kinematic uncertainties; (iii) design an efficient software framework simplifying the effort-intensive phases of subject-specific modeling pre-processing. The first goal underlined the relevance of subject-specific musculoskeletal modeling to determine physiological skeletal loads during gait, corroborating the choice of full subject-specific modeling for the analyses of pathological conditions. The second goal characterized the sensitivity of skeletal load predictions to major musculotendon parameters and kinematic uncertainties, and robust probabilistic methods were applied for methodological and clinical purposes. The last goal created an efficient software framework for subject-specific modeling and simulation, which is practical, user friendly and effort effective. Future research development aims at the implementation of more accurate models describing lower-limb joint mechanics and musculotendon paths, and the assessment of an overall scenario of the crucial model parameters affecting the skeletal load predictions through probabilistic modeling.

Il conferimento di azienda

Affrontare il tema del conferimento di azienda, così come esaminare ogni aspetto inerente, più in generale, l'azienda, può apparire estremamente arduo e complicato, stante il rischio di ripetere, in modo quasi scontato, "cose già dette" nel corso degli anni, prendendo le mosse da contributi noti ed arcinoti, soprattutto con riferimento alla disciplina dell'imprenditore commerciale, ossia alla prima tematica che viene presa in considerazione da parte del neofita del diritto commerciale. Tuttavia, a ben vedere, l'esaustività e completezza di tali studi non impedisce di affrontare, nell'attualità, alcuni aspetti che, anche grazie ai continui interventi del legislatore, presentano elementi degni di approfondimento. In tale ottica, quindi, è stato impostato il presente lavoro di ricerca. Così, ad un primo capitolo prevalentemente compilativo e volto ad individuare, nell'ordinamento giuridico, tutte le disposizioni che possono assumere rilevanza nell'inquadramento della disciplina del conferimento di azienda, nonchè le nozioni base di tale operazione, ne seguono altri due che si caratterizzano, rispettivamente: a) l'uno (il secondo capitolo), quale concreta individuazione delle modalità di esecuzione dell'operazione di conferimento di azienda, dalla decisione di procedere in tal senso, alla concreta esecuzione dell'apporto; b) l'altro (il terzo capitolo), quale esame di alcuni aspetti problematici che emergono a seguito dell'esecuzione dell'apporto, sia con riferimento agli effetti prodotti nei rapporti ricompresi nell'oggetto dell'apporto, sia con riferimento al ruolo dei diversi soggetti che, direttamente e/o indirettamente, ne subiscono i riflessi. In entrambi i capitoli (due e tre), peraltro, si affrontano non solo aspetti connessi alla disciplina dell'impresa ancora in bonis, ma anche, data l'attualità degli interventi operati dal legislatore nell'ambito della risoluzione della crisi dell'impresa, le questioni inerenti l'utilizzo di tale operazione quale forma di liquidazione dell'attivo. Si chiude l'elaborato con alcune riflessioni inerenti le forme di reazione agli abusi che, sovente, caratterizzano l'apporto dell'azienda.

Iva e Pubblica Autorità: coerenza del sistema e dimensioni nazionali

Il sistema comune europeo dell’imposta sul valore aggiunto privilegia caratteri e finalità economiche nel definire chi siano gli operatori economici soggetti all’IVA. Una disciplina particolare è, tuttavia, prevista per i soggetti di diritto pubblico che, oltre alla principale attività istituzionale, esercitano un’attività di carattere economico. Ai sensi dell’articolo 13 della Direttiva del 28 novembre 2006, 2006/112/CE, gli Stati, le Regioni, le Province, i Comuni e gli altri enti di diritto pubblico, in relazione alle attività ed operazioni che essi effettuano in quanto pubbliche autorità, non sono considerati soggetti passivi IVA anche se in relazione ad esse percepiscono diritti, canoni, contributi o retribuzioni. La vigente disciplina europea delle attività economiche esercitate dagli enti pubblici, oltre che inadeguata al contesto economico attuale, rischia di diventare un fattore che influenza negativamente l’efficacia del modello impositivo dell’IVA e l’agire degli enti pubblici. La tesi propone un modello alternativo che prevede l’inversione dell’impostazione attuale della Direttiva IVA al fine di considerare, di regola, soggetti passivi IVA gli organismi pubblici che svolgono - ancorché nella veste di pubblica autorità - attività oggettivamente economiche.