Sistemi riconfigurabili a basso consumo per applicazioni di monitoraggio distribuito

The term Ambient Intelligence (AmI) refers to a vision on the future of the information society where smart, electronic environment are sensitive and responsive to the presence of people and their activities (Context awareness). In an ambient intelligence world, devices work in concert to support people in carrying out their everyday life activities, tasks and rituals in an easy, natural way using information and intelligence that is hidden in the network connecting these devices. This promotes the creation of pervasive environments improving the quality of life of the occupants and enhancing the human experience. AmI stems from the convergence of three key technologies: ubiquitous computing, ubiquitous communication and natural interfaces. Ambient intelligent systems are heterogeneous and require an excellent cooperation between several hardware/software technologies and disciplines, including signal processing, networking and protocols, embedded systems, information management, and distributed algorithms. Since a large amount of fixed and mobile sensors embedded is deployed into the environment, the Wireless Sensor Networks is one of the most relevant enabling technologies for AmI. WSN are complex systems made up of a number of sensor nodes which can be deployed in a target area to sense physical phenomena and communicate with other nodes and base stations. These simple devices typically embed a low power computational unit (microcontrollers, FPGAs etc.), a wireless communication unit, one or more sensors and a some form of energy supply (either batteries or energy scavenger modules). WNS promises of revolutionizing the interactions between the real physical worlds and human beings. Low-cost, low-computational power, low energy consumption and small size are characteristics that must be taken into consideration when designing and dealing with WSNs. To fully exploit the potential of distributed sensing approaches, a set of challengesmust be addressed. Sensor nodes are inherently resource-constrained systems with very low power consumption and small size requirements which enables than to reduce the interference on the physical phenomena sensed and to allow easy and low-cost deployment. They have limited processing speed,storage capacity and communication bandwidth that must be efficiently used to increase the degree of local ”understanding” of the observed phenomena. A particular case of sensor nodes are video sensors. This topic holds strong interest for a wide range of contexts such as military, security, robotics and most recently consumer applications. Vision sensors are extremely effective for medium to long-range sensing because vision provides rich information to human operators. However, image sensors generate a huge amount of data, whichmust be heavily processed before it is transmitted due to the scarce bandwidth capability of radio interfaces. In particular, in video-surveillance, it has been shown that source-side compression is mandatory due to limited bandwidth and delay constraints. Moreover, there is an ample opportunity for performing higher-level processing functions, such as object recognition that has the potential to drastically reduce the required bandwidth (e.g. by transmitting compressed images only when something ‘interesting‘ is detected). The energy cost of image processing must however be carefully minimized. Imaging could play and plays an important role in sensing devices for ambient intelligence. Computer vision can for instance be used for recognising persons and objects and recognising behaviour such as illness and rioting. Having a wireless camera as a camera mote opens the way for distributed scene analysis. More eyes see more than one and a camera system that can observe a scene from multiple directions would be able to overcome occlusion problems and could describe objects in their true 3D appearance. In real-time, these approaches are a recently opened field of research. In this thesis we pay attention to the realities of hardware/software technologies and the design needed to realize systems for distributed monitoring, attempting to propose solutions on open issues and filling the gap between AmI scenarios and hardware reality. The physical implementation of an individual wireless node is constrained by three important metrics which are outlined below. Despite that the design of the sensor network and its sensor nodes is strictly application dependent, a number of constraints should almost always be considered. Among them: • Small form factor to reduce nodes intrusiveness. • Low power consumption to reduce battery size and to extend nodes lifetime. • Low cost for a widespread diffusion. These limitations typically result in the adoption of low power, low cost devices such as low powermicrocontrollers with few kilobytes of RAMand tenth of kilobytes of program memory with whomonly simple data processing algorithms can be implemented. However the overall computational power of the WNS can be very large since the network presents a high degree of parallelism that can be exploited through the adoption of ad-hoc techniques. Furthermore through the fusion of information from the dense mesh of sensors even complex phenomena can be monitored. In this dissertation we present our results in building several AmI applications suitable for a WSN implementation. The work can be divided into two main areas:Low Power Video Sensor Node and Video Processing Alghoritm and Multimodal Surveillance . Low Power Video Sensor Nodes and Video Processing Alghoritms In comparison to scalar sensors, such as temperature, pressure, humidity, velocity, and acceleration sensors, vision sensors generate much higher bandwidth data due to the two-dimensional nature of their pixel array. We have tackled all the constraints listed above and have proposed solutions to overcome the current WSNlimits for Video sensor node. We have designed and developed wireless video sensor nodes focusing on the small size and the flexibility of reuse in different applications. The video nodes target a different design point: the portability (on-board power supply, wireless communication), a scanty power budget (500mW),while still providing a prominent level of intelligence, namely sophisticated classification algorithmand high level of reconfigurability. We developed two different video sensor node: The device architecture of the first one is based on a low-cost low-power FPGA+microcontroller system-on-chip. The second one is based on ARM9 processor. Both systems designed within the above mentioned power envelope could operate in a continuous fashion with Li-Polymer battery pack and solar panel. Novel low power low cost video sensor nodes which, in contrast to sensors that just watch the world, are capable of comprehending the perceived information in order to interpret it locally, are presented. Featuring such intelligence, these nodes would be able to cope with such tasks as recognition of unattended bags in airports, persons carrying potentially dangerous objects, etc.,which normally require a human operator. Vision algorithms for object detection, acquisition like human detection with Support Vector Machine (SVM) classification and abandoned/removed object detection are implemented, described and illustrated on real world data. Multimodal surveillance: In several setup the use of wired video cameras may not be possible. For this reason building an energy efficient wireless vision network for monitoring and surveillance is one of the major efforts in the sensor network community. Energy efficiency for wireless smart camera networks is one of the major efforts in distributed monitoring and surveillance community. For this reason, building an energy efficient wireless vision network for monitoring and surveillance is one of the major efforts in the sensor network community. The Pyroelectric Infra-Red (PIR) sensors have been used to extend the lifetime of a solar-powered video sensor node by providing an energy level dependent trigger to the video camera and the wireless module. Such approach has shown to be able to extend node lifetime and possibly result in continuous operation of the node.Being low-cost, passive (thus low-power) and presenting a limited form factor, PIR sensors are well suited for WSN applications. Moreover techniques to have aggressive power management policies are essential for achieving long-termoperating on standalone distributed cameras needed to improve the power consumption. We have used an adaptive controller like Model Predictive Control (MPC) to help the system to improve the performances outperforming naive power management policies.

La didattica della traduzione specializzata dallo spagnolo in italiano: competenza traduttiva, genere testuale e nuove tecnologie

Il progetto di ricerca che presentiamo nasce dalla virtuosa combinazione di teoria e prassi didattica nello spirito della ricerca-azione. Scopo del presente lavoro è elaborare un percorso didattico di formazione alla traduzione specializzata in ambito medico-scientifico, tecnico ed economico-giuridico per la combinazione linguistica spagnolo-italiano all’interno della cornice istituzionale concreta dell’università italiana oggi. La nostra proposta formativa si fonda su tre elementi: la ricognizione del mercato attuale della traduzione per la combinazione linguistica indicata, l’individuazione degli obiettivi formativi in base al modello di competenza traduttiva scelto, l’elaborazione del percorso didattico per competenze e basato sull’enfoque por tareas di traduzione. Nella progettazione delle modalità didattiche due sono gli aspetti che definiscono il percorso proposto: il concetto di genere testuale specializzato per la traduzione e la gestione delle informazioni mediante le nuove tecnologie (corpora, banche dati terminologiche e fraseologiche, memorie di traduzione, traduzione controllata). Il presente lavoro si articola in due parti: la prima parte (quattro capitoli) presenta l’inquadramento teorico all’interno del quale si sviluppa la riflessione intorno alla didattica della traduzione specializzata; la seconda parte (due capitoli) presenta l’inquadramento metodologico e analitico all’interno del quale si elabora la nostra proposta didattica. Nel primo capitolo si illustrano i rapporti fra traduzione e mondo professionale; nel secondo capitolo si presenta il concetto di competenza traduttiva come ponte tra la formazione e il mondo della traduzione professionale; nel terzo capitolo si ripercorrono le tappe principali dell’evoluzione della didattica della traduzione generale; nel quarto capitolo illustriamo alcune tra le più recenti e complete proposte didattiche per la traduzione specializzata in ambito tecnico, medico-scientifico ed economico-giuridico. Nel quinto capitolo si introduce il concetto di genere testuale specializzato per la traduzione e nel sesto capitolo si illustra la proposta didattica per la traduzione specializzata dallo spagnolo in italiano che ha motivato il presente lavoro.

Scrittura, sociabilità e strategie di persuasione: Marie-Anne Paulze-Lavoisier, secrétaire (1758-1836)

Attraverso uno studio di caso, centrato su Marie-Anne Paulze-Lavoisier (1758-1836), la tesi tratta di pratiche legate all’annotazione e, più in generale, alla registrazione di informazioni su supporti cartacei tra gli anni ’70 del Settecento e gli anni ‘30 dell’Ottocento. Nota oggi come moglie e collaboratrice del chimico Antoine-Laurent Lavoisier (1743-1794), di cui avrebbe promosso le teorie attraverso un’attività di traduttrice e illustratrice, Paulze-Lavoisier è qui presentata nella veste di “secrétaire”, ossia di figura incaricata di mettere per iscritto osservazioni di varia natura. Ci si concentra, in particolare, sui Registres de laboratoire di Lavoisier, 14 quaderni petit in-folio a cui sono affidati i resoconti di esperimenti condotti a Parigi tra il 1772 e il 1788 e che rilevano in misura significativa della mano di lei. Oggetto finora di una storia del pensiero scientifico, interessata alle “idee” in essi contenute, i Registres sono da noi riletti alla luce di un approccio “materiale”, attento alle pratiche e alle condizioni della loro compilazione e del loro riutilizzo nel tempo. Si indagano quindi le funzioni di questi quaderni rispetto alla pratica sperimentale, ricostruendo al contempo i tratti e le evoluzioni del ruolo di segretaria affidato a Paulze-Lavoisier. Il focus su Paulze-Lavoisier permette da un lato a sollevare nuove domande in merito al rapporto tra scrittura delle note, genere e sociabilità ma anche, ad un altro livello, alla cosiddetta “invisibilità” degli assistenti; dall’altro offre la materia per una storia lunga dei Registres, che dai primi gesti in essi da lei operati agli inizi degli anni ’70 del Settecento arriva fino alle manipolazioni a cui sono sottoposti, per sua volontà, nei primi decenni dell’Ottocento.

Decentralized systems for the protection and portability of personal data

The General Data Protection Regulation (GDPR) has been designed to help promote a view in favor of the interests of individuals instead of large corporations. However, there is the need of more dedicated technologies that can help companies comply with GDPR while enabling people to exercise their rights. We argue that such a dedicated solution must address two main issues: the need for more transparency towards individuals regarding the management of their personal information and their often hindered ability to access and make interoperable personal data in a way that the exercise of one's rights would result in straightforward. We aim to provide a system that helps to push personal data management towards the individual's control, i.e., a personal information management system (PIMS). By using distributed storage and decentralized computing networks to control online services, users' personal information could be shifted towards those directly concerned, i.e., the data subjects. The use of Distributed Ledger Technologies (DLTs) and Decentralized File Storage (DFS) as an implementation of decentralized systems is of paramount importance in this case. The structure of this dissertation follows an incremental approach to describing a set of decentralized systems and models that revolves around personal data and their subjects. Each chapter of this dissertation builds up the previous one and discusses the technical implementation of a system and its relation with the corresponding regulations. We refer to the EU regulatory framework, including GDPR, eIDAS, and Data Governance Act, to build our final system architecture's functional and non-functional drivers. In our PIMS design, personal data is kept in a Personal Data Space (PDS) consisting of encrypted personal data referring to the subject stored in a DFS. On top of that, a network of authorization servers acts as a data intermediary to provide access to potential data recipients through smart contracts.

Strategic decision making in international firms: effect of top management team internationalization on international strategic decision process

In this research project, I have integrated two research streams on international strategic decisions making in international firms: upper echelons or top management teams (TMT) internationalization research and international strategic decision making process research. Both research streams in international business literature have evolved independently, but there is a potential in combining these two streams of research. The first empirical paper “TMT internationalization and international strategic decision making process: a decision level analysis of rationality, speed, and performance” explores the influence of TMT internationalization on strategic decision rationality and speed and, subsequently, their effect on international strategic decision effectiveness (performance). The results show that the internationalization of TMT is positively related to decision effectiveness and this relationship is mediated by decision rationality while the hypotheses regarding the association between TMT internationalization and decision speed, and the mediating effect of speed were not supported. The second paper “TMT internationalization and international strategic decision rationality: the mediating role of international information” of my thesis is a simple but logical extension of first paper. The first paper showed that TMT Internationalization has a significant positive effect on international strategic decision rationality. The second paper explicitly showed that TMT internationalization affect on international strategic decision rationality comes from two sources: international experience (personal international knowledge and information) and international information collected from managerial international contacts. For this research project, I have collected data from international software firms in Pakistan. My research contributes to the literature on upper echelons theory and strategic decision making in context of international business and international firms by explicitly examining the link between TMT internationalization and characteristics of strategic decisions making process (i.e. rationality and speed) in international firms and their possible mediating effect on performance.