Model and control of tendon actuated robots

The use of tendons for the transmission of the forces and the movements in robotic devices has been investigated from several researchers all over the world. The interest in this kind of actuation modality is based on the possibility of optimizing the position of the actuators with respect to the moving part of the robot, in the reduced weight, high reliability, simplicity in the mechanic design and, finally, in the reduced cost of the resulting kinematic chain. After a brief discussion about the benefits that the use of tendons can introduce in the motion control of a robotic device, the design and control aspects of the UB Hand 3 anthropomorphic robotic hand are presented. In particular, the tendon-sheaths transmission system adopted in the UB Hand 3 is analyzed and the problem of force control and friction compensation is taken into account. The implementation of a tendon based antagonistic actuated robotic arm is then investigated. With this kind of actuation modality, and by using transmission elements with nonlinear force/compression characteristic, it is possible to achieve simultaneous stiffness and position control, improving in this way the safety of the device during the operation in unknown environments and in the case of interaction with other robots or with humans. The problem of modeling and control of this type of robotic devices is then considered and the stability analysis of proposed controller is reported. At the end, some tools for the realtime simulation of dynamic systems are presented. This realtime simulation environment has been developed with the aim of improving the reliability of the realtime control applications both for rapid prototyping of controllers and as teaching tools for the automatic control courses.

Welfare provision in Sweden and the dominant position of the Sap

There have been almost fifty years since Harry Eckstein' s classic monograph, A Theory of Stable Democracy (Princeton, 1961), where he sketched out the basic tenets of the “congruence theory”, which was to become one of the most important and innovative contributions to understanding democratic rule. His next work, Division and Cohesion in Democracy, (Princeton University Press: 1966) is designed to serve as a plausibility probe for this 'theory' (ftn.) and is a case study of a Northern democratic system, Norway. What is more, this line of his work best exemplifies the contribution Eckstein brought to the methodology of comparative politics through his seminal article, “ “Case Study and Theory in Political Science” ” (in Greenstein and Polsby, eds., Handbook of Political Science, 1975), on the importance of the case study as an approach to empirical theory. This article demonstrates the special utility of “crucial case studies” in testing theory, thereby undermining the accepted wisdom in comparative research that the larger the number of cases the better. Although not along the same lines, but shifting the case study unit of research, I intend to take up here the challenge and build upon an equally unique political system, the Swedish one. Bearing in mind the peculiarities of the Swedish political system, my unit of analysis is going to be further restricted to the Swedish Social Democratic Party, the Svenska Arbetare Partiet. However, my research stays within the methodological framework of the case study theory inasmuch as it focuses on a single political system and party. The Swedish SAP endurance in government office and its electoral success throughout half a century (ftn. As of the 1991 election, there were about 56 years - more than half century - of interrupted social democratic "reign" in Sweden.) are undeniably a performance no other Social Democrat party has yet achieved in democratic conditions. Therefore, it is legitimate to inquire about the exceptionality of this unique political power combination. Which were the different components of this dominance power position, which made possible for SAP's governmental office stamina? I will argue here that it was the end-product of a combination of multifarious factors such as a key position in the party system, strong party leadership and organization, a carefully designed strategy regarding class politics and welfare policy. My research is divided into three main parts, the historical incursion, the 'welfare' part and the 'environment' part. The first part is a historical account of the main political events and issues, which are relevant for my case study. Chapter 2 is devoted to the historical events unfolding in the 1920-1960 period: the Saltsjoebaden Agreement, the series of workers' strikes in the 1920s and SAP's inception. It exposes SAP's ascent to power in the mid 1930s and the party's ensuing strategies for winning and keeping political office, that is its economic program and key economic goals. The following chapter - chapter 3 - explores the next period, i.e. the period from 1960s to 1990s and covers the party's troubled political times, its peak and the beginnings of the decline. The 1960s are relevant for SAP's planning of a long term economic strategy - the Rehn Meidner model, a new way of macroeconomic steering, based on the Keynesian model, but adapted to the new economic realities of welfare capitalist societies. The second and third parts of this study develop several hypotheses related to SAP's 'dominant position' (endurance in politics and in office) and test them afterwards. Mainly, the twin issues of economics and environment are raised and their political relevance for the party analyzed. On one hand, globalization and its spillover effects over the Swedish welfare system are important causal factors in explaining the transformative social-economic challenges the party had to put up with. On the other hand, Europeanization and environmental change influenced to a great deal SAP's foreign policy choices and its domestic electoral strategies. The implications of globalization on the Swedish welfare system will make the subject of two chapters - chapters four and five, respectively, whereupon the Europeanization consequences will be treated at length in the third part of this work - chapters six and seven, respectively. Apparently, at first sight, the link between foreign policy and electoral strategy is difficult to prove and uncanny, in the least. However, in the SAP's case there is a bulk of literature and public opinion statistical data able to show that governmental domestic policy and party politics are in a tight dependence to foreign policy decisions and sovereignty issues. Again, these country characteristics and peculiar causal relationships are outlined in the first chapters and explained in the second and third parts. The sixth chapter explores the presupposed relationship between Europeanization and environmental policy, on one hand, and SAP's environmental policy formulation and simultaneous agenda-setting at the international level, on the other hand. This chapter describes Swedish leadership in environmental policy formulation on two simultaneous fronts and across two different time spans. The last chapter, chapter eight - while trying to develop a conclusion, explores the alternative theories plausible in explaining the outlined hypotheses and points out the reasons why these theories do not fit as valid alternative explanation to my systemic corporatism thesis as the main causal factor determining SAP's 'dominant position'. Among the alternative theories, I would consider Traedgaardh L. and Bo Rothstein's historical exceptionalism thesis and the public opinion thesis, which alone are not able to explain the half century social democratic endurance in government in the Swedish case.

Scene Reconstruction And Understanding By RGB-D Sensors

This thesis investigates interactive scene reconstruction and understanding using RGB-D data only. Indeed, we believe that depth cameras will still be in the near future a cheap and low-power 3D sensing alternative suitable for mobile devices too. Therefore, our contributions build on top of state-of-the-art approaches to achieve advances in three main challenging scenarios, namely mobile mapping, large scale surface reconstruction and semantic modeling. First, we will describe an effective approach dealing with Simultaneous Localization And Mapping (SLAM) on platforms with limited resources, such as a tablet device. Unlike previous methods, dense reconstruction is achieved by reprojection of RGB-D frames, while local consistency is maintained by deploying relative bundle adjustment principles. We will show quantitative results comparing our technique to the state-of-the-art as well as detailed reconstruction of various environments ranging from rooms to small apartments. Then, we will address large scale surface modeling from depth maps exploiting parallel GPU computing. We will develop a real-time camera tracking method based on the popular KinectFusion system and an online surface alignment technique capable of counteracting drift errors and closing small loops. We will show very high quality meshes outperforming existing methods on publicly available datasets as well as on data recorded with our RGB-D camera even in complete darkness. Finally, we will move to our Semantic Bundle Adjustment framework to effectively combine object detection and SLAM in a unified system. Though the mathematical framework we will describe does not restrict to a particular sensing technology, in the experimental section we will refer, again, only to RGB-D sensing. We will discuss successful implementations of our algorithm showing the benefit of a joint object detection, camera tracking and environment mapping.

New analytical LC-mass spectrometry methodologies for the quali-quantitative determination of natural substances and drugs in complex matrices

This thesis reports an integrated analytical and physicochemical approach for the study of natural substances and new drugs based on mass spectrometry techniques combined with liquid chromatography. In particular, Chapter 1 concerns the study of Berberine a natural substance with pharmacological activity for the treatment of hepatobiliary and intestinal diseases. The first part focused on the relationships between physicochemical properties, pharmacokinetics and metabolism of Berberine and its metabolites. For this purpose a sensitive HPLC-ES-MS/MS method have been developed, validated and used to determine these compounds during their physicochemical properties studies and plasma levels of berberine and its metabolites including berberrubine(M1), demethylenberberine(M3), and jatrorrhizine(M4) in humans. Data show that M1, could have an efficient intestinal absorption by passive diffusion due to a keto-enol tautomerism confirmed by NMR studies and its higher plasma concentration. In the second part of Chapter 1, a comparison between M1 and BBR in vivo biodistribution in rat has been studied. In Chapter 2 a new HPLC-ES-MS/MS method for the simultaneous determination and quantification of glucosinolates, as glucoraphanin, glucoerucin and sinigrin, and isothiocyanates, as sulforaphane and erucin, has developed and validated. This method has been used for the analysis of functional foods enriched with vegetable extracts. Chapter 3 focused on a physicochemical study of the interaction between the bile acid sequestrants used in the treatment of hypercholesterolemia including colesevelam and cholestyramine with obeticolic acid (OCA), potent agonist of nuclear receptor farnesoid X (FXR). In particular, a new experimental model for the determination of equilibrium binding isotherm was developed. Chapter 4 focused on methodological aspects of new hard ionization coupled with liquid chromatography (Direct-EI-UHPLC-MS) not yet commercially available and potentially useful for qualitative analysis and for “transparent” molecules to soft ionization techniques. This method was applied to the analysis of several steroid derivatives.

1st and 2nd Generation Ethanol from Biomass Crops

In chapter 1 and 2 calcium hydroxide as impregnation agent before steam explosion of sugarcane bagasse and switchgrass, respectively, was compared with auto-hydrolysis, assessing the effects on enzymatic hydrolysis and simultaneous saccharification and fermentation (SSF) at high solid concentration of pretreated solid fraction. In addition, anaerobic digestion of pretreated liquid fraction was carried out, in order to appraise the effectiveness of calcium hydroxide before steam explosion in a more comprehensive way. In As water is an expensive input in both cultivation of biomass crops and subsequent pretreatment, Chapter 3 addressed the effects of variable soil moisture on biomass growth and composition of biomass sorghum. Moreover, the effect of water stress was related to the characteristics of stem juice for 1st generation ethanol and structural carbohydrates for 2nd generation ethanol. In the frame of chapter 1, calcium hydroxide was proven to be a suitable catalyst for sugarcane bagasse before steam explosion, in order to enhance fibre deconstruction. In chapter 2, effect of calcium hydroxide on switchgrass showed a great potential when ethanol was focused, whereas acid addition produced higher methane yield. Regarding chapter 3, during crop cycle the amount of cellulose, hemicellulose and AIL changed causing a decrease of 2G ethanol amount. Biomass physical and chemical properties involved a lower glucose yield and concentration at the end of enzymatic hydrolysis and, consequently, a lower 2G ethanol concentration at the end of simultaneous saccharification and fermentation, proving that there is strong relationship between structure, chemical composition, and fermentable sugar yield. The significantly higher concentration of ethanol at the early crop stage could be an important incentive to consider biomass sorghum as second crop in the season, to be introduced into some agricultural systems, potentially benefiting farmers and, above all, avoiding the exacerbation of the debate about fuel vs food crops.

Strutture a pareti portanti in C. A. caratterizzate da elevate prestazioni sismiche

Per quanto riguarda le costruzioni in conglomerato cementizio armato gettato in opera, i sistemi strutturali più comunemente utilizzati sono quelli a telaio (con trasmissione di momento flettente), a setti portanti o una combinazione di entrambi. A partire dagli anni ’60, numerosissimi sono stati gli studi relativamente al comportamento sismico di strutture in c.a. a telaio. Lo stesso si può affermare per le costruzioni costituite da pareti miste a telai. In particolare, l’argomento della progettazione sismica di tali tipologie di edifici ha sempre riguardato soprattutto gli edifici alti nei quali, evidentemente, l’impiego delle pareti avveniva allo scopo di limitarne la elevata deformabilità. Il comportamento sismico di strutture realizzate interamente a pareti portanti in c.a. è stato meno studiato negli anni, nonostante si sia osservato che edifici realizzati mediante tali sistemi strutturali abbiano mostrato, in generale, pregevoli risorse di resistenza nei confronti di terremoti anche di elevata intensità. Negli ultimi 10 anni, l’ingegneria sismica si sta incentrando sull’approfondimento delle risorse di tipologie costruttive di cui si è sempre fatto largo uso in passato (tipicamente nei paesi dell’Europa continentale, in America latina, negli USA e anche in Italia), ma delle quali mancavano adeguate conoscenze scientifiche relativamente al loro comportamento in zona sismica. Tali tipologie riguardano sostanzialmente sistemi strutturali interamente costituiti da pareti portanti in c.a. per edifici di modesta altezza, usualmente utilizzati in un’edilizia caratterizzata da ridotti costi di realizzazione (fabbricati per abitazioni civili e/o uffici). Obiettivo “generale” del lavoro di ricerca qui presentato è lo studio del comportamento sismico di strutture realizzate interamente a setti portanti in c.a. e di modesta altezza (edilizia caratterizzata da ridotti costi di realizzazione). In particolare, le pareti che si intendono qui studiare sono caratterizzate da basse percentuali geometriche di armatura e sono realizzate secondo la tecnologia del cassero a perdere. A conoscenza dello scrivente, non sono mai stati realizzati, fino ad oggi, studi sperimentali ed analitici allo scopo di determinare il comportamento sismico di tali sistemi strutturali, mentre è ben noto il loro comportamento statico. In dettaglio, questo lavoro di ricerca ha il duplice scopo di: • ottenere un sistema strutturale caratterizzato da elevate prestazioni sismiche; • mettere a punto strumenti applicativi (congruenti e compatibili con le vigenti normative e dunque immediatamente utilizzabili dai progettisti) per la progettazione sismica dei pannelli portanti in c.a. oggetto del presente studio. Al fine di studiare il comportamento sismico e di individuare gli strumenti pratici per la progettazione, la ricerca è stata organizzata come segue: • identificazione delle caratteristiche delle strutture studiate, mediante lo sviluppo/specializzazione di opportune formulazioni analitiche; • progettazione, supervisione, ed interpretazione di una estesa campagna di prove sperimentali eseguita su pareti portanti in c.a. in vera grandezza, al fine di verificarne l’efficace comportamento sotto carico ciclico; • sviluppo di semplici indicazioni (regole) progettuali relativamente alle strutture a pareti in c.a. studiate, al fine di ottenere le caratteristiche prestazionali desiderate. I risultati delle prove sperimentali hanno mostrato di essere in accordo con le previsioni analitiche, a conferma della validità degli strumenti di predizione del comportamento di tali pannelli. Le elevatissime prestazioni riscontrate sia in termini di resistenza che in termini di duttilità hanno evidenziato come le strutture studiate, così messe a punto, abbiano manifestato un comportamento sismico più che soddisfacente.

Effects of ambient temperature on cardiovascular regulation during sleep in hypocretin-deficient narcoleptic mice

Hypocretin 1 and 2 (HCRT, also called Orexin A and B) are neuropeptides released by neurons in the lateral hypothalamus. HCRT neurons widely project to the entire neuroaxis. HCRT neurons have been reported to participate in various hypothalamic physiological processes including cardiovascular functions, wake-sleep cycle, and they may also influence metabolic rate and the regulation of body temperature. HCRT neurons are lost in narcolepsy, a rare neurological disorder, characterized by excessive daytime sleepiness, cataplexy, sleep fragmentation and occurrence of sleep-onset rapid-eye-movement episodes. We investigated whether HCRT neurons mediate the sleep-dependent cardiovascular adaptations to changes in ambient temperature (Ta). HCRT-ataxin3 transgenic mice with genetic ablation of HCRT neurons (n = 11) and wild-type controls (n = 12) were instrumented with electrodes for sleep scoring and a telemetric blood pressure (BP) transducer (DSI, Inc.). Simultaneous sleep and BP recordings were performed on mice undisturbed and freely-behaving at 20 °C, 25 °C, and 30 °C for 48 hours at each Ta. Analysis of variance of BP indicated a significance of the main effects of wake-sleep state and Ta, their interaction effect, and the wake-sleep state x mouse strain interaction effect. BP increased with decreasing Ta. This effect of Ta on BP was significantly lower in rapid-eye-movement sleep (REMS) than either in non-rapid-eye-movement sleep (NREMS) or wakefulness regardless of the mouse strain. BP was higher in wakefulness than either in NREMS or REMS. This effect of sleep on BP was significantly reduced in mice lacking HCRT neurons at each Ta, particularly during REMS. These data suggest that HCRT neurons play a critical role in mediating the effects of sleep but not those of Ta on BP in mice. HCRT neurons may thus be part of the central neural pathways which mediate the phenomenon of blood pressure dipping on passing from wakefulness to sleep.

Resezioni epatiche eco-guidate radicali ma conservative simultanee alle resezioni colo-rettali. Un approccio sicuro al cancro colorettale avanzato

Il cancro colorettale (CRC) rimane la prima causa di morte nei paesi occidentali.Dal 15% al 25% dei pazienti affetti da CRC presenta metastasi epatiche sincrone (CRLM) al momento della diagnosi.La resezione epatica radicale rimane l’unica terapia potenzialmente curativa in presenza di CRLM con una sopravvivenza a 5 anni compresa tra il 17% ed il 35% ed a 10 anni tra il 16% e il 23% rispettivamente. La tempistica ottimale per la resezione chirurgica in caso di presentazione sincrona di CRC è controversa.Questo studio intende dimostrare che le resezioni epatiche ecoguidate radicali ma conservative simultanee ad una resezione colorettale rappresentano una tecnica sicura ed efficace nei pazienti con CRC avanzato. 48 pazienti sono stati sottoposti ad una resezione simultanea colorettale ed epatica. L’età media +SD (range) era di 64,2+9,7 (38-84).Un solo paziente è deceduto entro 30 giorni. La mortalità post operatoria è stata complessivamente del 2,1%. Nove pazienti (18,8%) hanno sviluppato una o più complicanza ,4 (8,3%) di grado III-IV sec. Clavien-Dindo e 5 (10,4%) di grado I-II. La durata complessiva dell’intervento chirurgico simultaneo è stata di 486,6+144,0 (153-804) minuti.Questo studio conferma che le resezioni colorettali ed epatiche simultanee possono essere eseguite senza un significativo aumento della morbilità e mortalità perioperatorie, anche in pazienti sottoposti ad una resezione anteriore ultrabassa ed in quelli in cui sia indicato il clampaggio intermittente dell’ilo epatico. L’IOUS è efficace nel ridurre l’estensione della resezione epatica in pazienti sia con CRLM anche multiple e bilobari .Poichè le complicanze maggiori sono frequenti dopo resezioni epatiche maggiori simultanee, riducendo l’estensione della resezione del parenchima epatico si può avere un impatto favorevole sul decorso post operatorio.Le resezioni epatiche ecoguidate radicali ma conservative simultanee ad una resezione colorettale sono una tecnica sicura ed efficace in pazienti con carcinoma colorettale avanzato e andrebbero considerate l’opzione primaria in casi selezionati

Analysis of technological accidents triggered by natural events (Natech) in the perspective of climate change

The severe accidents deriving from the impact of natural events on industrial installations have become a matter of growing concern in the last decades. In the literature, these events are typically referred to as Natech accidents. Several peculiarities distinguish them from conventional industrial accidents caused by internal factors, such as the possible occurrence of multiple simultaneous failures, and the enhanced probability of cascading events. The research project provides a comprehensive overview of Natech accidents that occurred in the Chemical and Process Industry, allowing for the identification of relevant aspects of Natech events. Quantified event trees and probability of ignition are derived from the collected dataset, providing a step forward in the quantitative risk assessment of Natech accidents. The investigation of past Natech accidents also demonstrated that wildfires may cause technological accidents. Climate change and global warming are promoting the conditions for wildfire development and rapid spread. Hence, ensuring the safety of industrial facilities exposed to wildfires is paramount. This was achieved defining safety distances between wildland vegetation and industrial equipment items. In addition, an innovative methodology for the vulnerability assessment of Natech and Domino scenarios triggered by wildfires was developed. The approach accounted for the dynamic behaviour of wildfire events and related technological scenarios. Besides, the performance of the emergency response and the related intervention time in the case of cascading events caused by natural events were evaluated. Overall, the tools presented in this thesis represent a step forward in the Quantitative Risk Assessment of Natech accidents. The methodologies developed also provide a solid basis for the definition of effective strategies for risk mitigation and reduction. These aspects are crucial to improve the resilience of industrial plants to natural hazards, especially considering the effects that climate change may have on the severity of such events.

On the motion planning & control of nonlinear robotic systems

In the last decades, we saw a soaring interest in autonomous robots boosted not only by academia and industry, but also by the ever in- creasing demand from civil users. As a matter of fact, autonomous robots are fast spreading in all aspects of human life, we can see them clean houses, navigate through city traffic, or harvest fruits and vegetables. Almost all commercial drones already exhibit unprecedented and sophisticated skills which makes them suitable for these applications, such as obstacle avoidance, simultaneous localisation and mapping, path planning, visual-inertial odometry, and object tracking. The major limitations of such robotic platforms lie in the limited payload that can carry, in their costs, and in the limited autonomy due to finite battery capability. For this reason researchers start to develop new algorithms able to run even on resource constrained platforms both in terms of computation capabilities and limited types of endowed sensors, focusing especially on very cheap sensors and hardware. The possibility to use a limited number of sensors allowed to scale a lot the UAVs size, while the implementation of new efficient algorithms, performing the same task in lower time, allows for lower autonomy. However, the developed robots are not mature enough to completely operate autonomously without human supervision due to still too big dimensions (especially for aerial vehicles), which make these platforms unsafe for humans, and the high probability of numerical, and decision, errors that robots may make. In this perspective, this thesis aims to review and improve the current state-of-the-art solutions for autonomous navigation from a purely practical point of view. In particular, we deeply focused on the problems of robot control, trajectory planning, environments exploration, and obstacle avoidance.