Sistemi riconfigurabili a basso consumo per applicazioni di monitoraggio distribuito

The term Ambient Intelligence (AmI) refers to a vision on the future of the information society where smart, electronic environment are sensitive and responsive to the presence of people and their activities (Context awareness). In an ambient intelligence world, devices work in concert to support people in carrying out their everyday life activities, tasks and rituals in an easy, natural way using information and intelligence that is hidden in the network connecting these devices. This promotes the creation of pervasive environments improving the quality of life of the occupants and enhancing the human experience. AmI stems from the convergence of three key technologies: ubiquitous computing, ubiquitous communication and natural interfaces. Ambient intelligent systems are heterogeneous and require an excellent cooperation between several hardware/software technologies and disciplines, including signal processing, networking and protocols, embedded systems, information management, and distributed algorithms. Since a large amount of fixed and mobile sensors embedded is deployed into the environment, the Wireless Sensor Networks is one of the most relevant enabling technologies for AmI. WSN are complex systems made up of a number of sensor nodes which can be deployed in a target area to sense physical phenomena and communicate with other nodes and base stations. These simple devices typically embed a low power computational unit (microcontrollers, FPGAs etc.), a wireless communication unit, one or more sensors and a some form of energy supply (either batteries or energy scavenger modules). WNS promises of revolutionizing the interactions between the real physical worlds and human beings. Low-cost, low-computational power, low energy consumption and small size are characteristics that must be taken into consideration when designing and dealing with WSNs. To fully exploit the potential of distributed sensing approaches, a set of challengesmust be addressed. Sensor nodes are inherently resource-constrained systems with very low power consumption and small size requirements which enables than to reduce the interference on the physical phenomena sensed and to allow easy and low-cost deployment. They have limited processing speed,storage capacity and communication bandwidth that must be efficiently used to increase the degree of local ”understanding” of the observed phenomena. A particular case of sensor nodes are video sensors. This topic holds strong interest for a wide range of contexts such as military, security, robotics and most recently consumer applications. Vision sensors are extremely effective for medium to long-range sensing because vision provides rich information to human operators. However, image sensors generate a huge amount of data, whichmust be heavily processed before it is transmitted due to the scarce bandwidth capability of radio interfaces. In particular, in video-surveillance, it has been shown that source-side compression is mandatory due to limited bandwidth and delay constraints. Moreover, there is an ample opportunity for performing higher-level processing functions, such as object recognition that has the potential to drastically reduce the required bandwidth (e.g. by transmitting compressed images only when something ‘interesting‘ is detected). The energy cost of image processing must however be carefully minimized. Imaging could play and plays an important role in sensing devices for ambient intelligence. Computer vision can for instance be used for recognising persons and objects and recognising behaviour such as illness and rioting. Having a wireless camera as a camera mote opens the way for distributed scene analysis. More eyes see more than one and a camera system that can observe a scene from multiple directions would be able to overcome occlusion problems and could describe objects in their true 3D appearance. In real-time, these approaches are a recently opened field of research. In this thesis we pay attention to the realities of hardware/software technologies and the design needed to realize systems for distributed monitoring, attempting to propose solutions on open issues and filling the gap between AmI scenarios and hardware reality. The physical implementation of an individual wireless node is constrained by three important metrics which are outlined below. Despite that the design of the sensor network and its sensor nodes is strictly application dependent, a number of constraints should almost always be considered. Among them: • Small form factor to reduce nodes intrusiveness. • Low power consumption to reduce battery size and to extend nodes lifetime. • Low cost for a widespread diffusion. These limitations typically result in the adoption of low power, low cost devices such as low powermicrocontrollers with few kilobytes of RAMand tenth of kilobytes of program memory with whomonly simple data processing algorithms can be implemented. However the overall computational power of the WNS can be very large since the network presents a high degree of parallelism that can be exploited through the adoption of ad-hoc techniques. Furthermore through the fusion of information from the dense mesh of sensors even complex phenomena can be monitored. In this dissertation we present our results in building several AmI applications suitable for a WSN implementation. The work can be divided into two main areas:Low Power Video Sensor Node and Video Processing Alghoritm and Multimodal Surveillance . Low Power Video Sensor Nodes and Video Processing Alghoritms In comparison to scalar sensors, such as temperature, pressure, humidity, velocity, and acceleration sensors, vision sensors generate much higher bandwidth data due to the two-dimensional nature of their pixel array. We have tackled all the constraints listed above and have proposed solutions to overcome the current WSNlimits for Video sensor node. We have designed and developed wireless video sensor nodes focusing on the small size and the flexibility of reuse in different applications. The video nodes target a different design point: the portability (on-board power supply, wireless communication), a scanty power budget (500mW),while still providing a prominent level of intelligence, namely sophisticated classification algorithmand high level of reconfigurability. We developed two different video sensor node: The device architecture of the first one is based on a low-cost low-power FPGA+microcontroller system-on-chip. The second one is based on ARM9 processor. Both systems designed within the above mentioned power envelope could operate in a continuous fashion with Li-Polymer battery pack and solar panel. Novel low power low cost video sensor nodes which, in contrast to sensors that just watch the world, are capable of comprehending the perceived information in order to interpret it locally, are presented. Featuring such intelligence, these nodes would be able to cope with such tasks as recognition of unattended bags in airports, persons carrying potentially dangerous objects, etc.,which normally require a human operator. Vision algorithms for object detection, acquisition like human detection with Support Vector Machine (SVM) classification and abandoned/removed object detection are implemented, described and illustrated on real world data. Multimodal surveillance: In several setup the use of wired video cameras may not be possible. For this reason building an energy efficient wireless vision network for monitoring and surveillance is one of the major efforts in the sensor network community. Energy efficiency for wireless smart camera networks is one of the major efforts in distributed monitoring and surveillance community. For this reason, building an energy efficient wireless vision network for monitoring and surveillance is one of the major efforts in the sensor network community. The Pyroelectric Infra-Red (PIR) sensors have been used to extend the lifetime of a solar-powered video sensor node by providing an energy level dependent trigger to the video camera and the wireless module. Such approach has shown to be able to extend node lifetime and possibly result in continuous operation of the node.Being low-cost, passive (thus low-power) and presenting a limited form factor, PIR sensors are well suited for WSN applications. Moreover techniques to have aggressive power management policies are essential for achieving long-termoperating on standalone distributed cameras needed to improve the power consumption. We have used an adaptive controller like Model Predictive Control (MPC) to help the system to improve the performances outperforming naive power management policies.

La trasformazione dei processi legislativi nella società dell'informazione: dall'e-Legislation all'e-Parliament

The transformation of legislative processes in the Information society: from eLegislation to eParliament This research analyzes, by means of an interdisciplinary and comparative approach, the transformation of legislative processes produced by the introduction of new ICT technologies. The use of ICT in support of parliamentary activities is concerned with efficiency of parliamentary process and aims at more transparent procedures, improved access to documents, social participation and cooperation among institutions. With ICT Parliaments are now able to improve their efficiency and optimize their business; they can advance the dialogue with their citizen both, through the real access and the effective availability of information and, through new way of participation in the democratic process. Finally, sharing information, know-out, best practices and other records, Parliaments will be able to develop new information and knowledge and to strengthen the role and power of Institutions. Only through a global vision of the full process, re-thinking and develop rules and uniform standard and so implementing the new opportunities carrying out by ICT, it will be possible to put in practice concrete eParliament results. The Research goals are at least three: 1. To Analysed the legislative process and the ICT opportunities to understand the impact of the latter on the former. In particular to check up the problems that ICT can raise in relation of the constitutional principles ensuring the process itself. 2. To realized an abstract model representing the legislative process regardless of the form of government, chambers composition, legal system, etc. 3. To suggest standard, structural, linguistic and ontological, able to implement the new opportunities of sharing, cooperation and reuse among the many and various stakeholders of the democratic/legislative view.

Tra società informazionale e prosumerismo: il citizen journalism e la partecipazione on line

I temi della ricerca riguardano il rapporto fra avvento del web e la modificazione dei processi di formazione di identità personale e sociale, della percezione dello spazio e del tempo, del prosumerismo digitale e delle varie forme di partecipazione ed associazione. Centrale è stata l’analisi del rapporto fra il Web 2.0 e la trasformazione delle forme di comunicazione a vari livelli, sia personali che sociali. Partendo da una analisi dei contesti socio-economici globali che hanno trasformato la società moderna nella società informazionale, è stato impostato un percorso di ricerca che approfondisse gli attuali criteri di strutturazione della propria identità, alla luce dell’avvento dei social network e delle reti virtuali di comunicazione come strumento preferenziale di socializzazione. La realtà delle reti sociali è stata analizzata in un’ottica di aggregazione spontanea mirata tanto alla comunicazione quanto alla tutela dei consumatori, e le trasformazioni portate dal Web 2.0 sono state la chiave di lettura per ridefinire i parametri della partecipazione dal basso generata dalla rete. Per comprendere la portata di tali trasformazioni nel contesto italiano è stato impostato un paragone tra l’uso del web negli Stati Uniti e in Italia, avendo le recente campagne elettorali dimostrato l’importanza del web nella partecipazione politica bottom-up; il percorso di ricerca ha dunque affrontato una comparazione di due casi, quello italiano e quello statunitense, finalizzato a comprendere l’attuale ruolo dell’utente nelle dinamiche di comunicazione mediatica. Per focalizzare al meglio le trasformazioni sociali generate dalla partecipazione on line è stato infine analizzato il caso del citizen journalism, per misurare, attraverso la metodologia dell’etnografia digitale, l’entità delle trasformazioni in corso. Il portale di giornalismo partecipativo YouReporter è stato il contesto privilegiato dove poter verificare le ipotesi iniziali circa le dinamiche di partecipazione, e il supporto di programmi di elaborazione statistica netnografica ha permesso di destrutturare al meglio tali dinamiche.

Pedofilia e pedopornografia online: una ricerca socio-criminologica nella realtà italiana e francese

Una delle realtà criminali che ha maggiormente fruito delle innovazioni introdotte dalla “società dell’Informazione” è, senza dubbio, quella dell’abuso sessuale sui minori. Tra le differenti forme di abuso sessuale sui minori, si è scelto di affrontare il fenomeno della pedopornografia online in ragione del preoccupante diffondersi di questa forma di criminalità che, grazie all’implementazione delle tecnologie dell’informazione, ha assunto caratteri nuovi, per alcuni versi difformi dai “tradizionali” profili della pedofilia, che sollevano interrogativi e nuove sfide sia sul versante della repressione di queste condotte illecite, sia sul piano della prevenzione. Nell'ambito di questo contributo, saranno esaminate in particolare le politiche penali elaborate in due diverse realtà nazionali, l'Italia e la Francia, a partire da differenti punti di vista e ponendo particolare attenzione agli strumenti, normativi ed operativi, introdotti per reprimere lo sfruttamento sessuale dei minori legato alla dimensione virtuale.

Cultura "Open" e nuovi modelli normativi per la gestione della conoscenza

L'obiettivo della ricerca è di compiere un'analisi dell'impatto della cosiddetta cultura "open" alla luce dell'attuale condizione del World Wide Web. Si prenderà in considerazione, in particolare, la genesi del movimento a partire dalle basi di cultura hacker e la relativa evoluzione nella filosofia del software libero, con il fine ultimo di identificare il ruolo attuale del modello open source nello scenario esistente. L'introduzione al concetto di Open Access completerà la ricerca anche considerando la recente riaffermazione della conoscenza come bene comune all'interno della Società dell'Informazione

Technologies for Ambient intelligence: from Smart Objects to Sensor Networks

n the last few years, the vision of our connected and intelligent information society has evolved to embrace novel technological and research trends. The diffusion of ubiquitous mobile connectivity and advanced handheld portable devices, amplified the importance of the Internet as the communication backbone for the fruition of services and data. The diffusion of mobile and pervasive computing devices, featuring advanced sensing technologies and processing capabilities, triggered the adoption of innovative interaction paradigms: touch responsive surfaces, tangible interfaces and gesture or voice recognition are finally entering our homes and workplaces. We are experiencing the proliferation of smart objects and sensor networks, embedded in our daily living and interconnected through the Internet. This ubiquitous network of always available interconnected devices is enabling new applications and services, ranging from enhancements to home and office environments, to remote healthcare assistance and the birth of a smart environment. This work will present some evolutions in the hardware and software development of embedded systems and sensor networks. Different hardware solutions will be introduced, ranging from smart objects for interaction to advanced inertial sensor nodes for motion tracking, focusing on system-level design. They will be accompanied by the study of innovative data processing algorithms developed and optimized to run on-board of the embedded devices. Gesture recognition, orientation estimation and data reconstruction techniques for sensor networks will be introduced and implemented, with the goal to maximize the tradeoff between performance and energy efficiency. Experimental results will provide an evaluation of the accuracy of the presented methods and validate the efficiency of the proposed embedded systems.