Instrumental and sensory analyses for the characterization of food, phytotherapeutic or pharmaceutical hemp products

To address the request to develop rapid and easy methods for determining the cannabinoids, an HPLC-UV method (8 min) to separate and quantify the 10 main cannabinoids in hemp inflorescences was developed, and in-house validated. Moreover, the antioxidant activity of cannabidiol (CBD) in two oily matrices was investigated and compared to that of α-tocopherol, in relation to the growing market of oily solutions containing cannabidiol. Then, since no univocal legislation on the evaluation of quality and authenticity of hemp seed oil (HSO) exists, the composition and quality of cold-pressed HSOs were also explored, highlighting a great variability in terms of oxidative state minor compounds content. From the sensory point of view, a panel was trained, a specific sensory wheel and a profile sheet were developed. Due to the Covid-19 pandemic, the sensory evaluation was also performed at home. The panel showed a good performance both in the laboratory and remotely. Moreover, a focus group was used to investigate consumers’ attitudes, pointing out that a high-quality HSO has to be cold-pressed and green for them. Then, the evaluation of stability during the storage of HSOs was investigated. The results showed that photo-oxidation did not seem to significantly affect the quality of the oil during the first 3 months of storage. Finally, a study about the evolution of the volatile profile of 9 HSOs, under accelerated oxidation conditions, allowed identifying volatile markers of HSOs oxidation and freshness. This Ph.D. was developed in the context of the scholarship “Harmonized procedures of analysis of medical, herbal, food and industrial cannabis: development and validation of cannabinoids’ quality control methods, of extraction and preparation of derivatives from the plant raw material, according to the product destination” funded by Enecta S.r.l.

Innovative treatments for shelf-life extension of whole and fresh-cut fruit

Maintaining the postharvest quality of whole and fresh-cut fruit during storage and distribution is the major challenge facing fruit industry. For this purpose, industry adopt a wide range of technologies to enable extended shelf-life. Many factors can lead to loss of quality in fresh product, hence the common description of these products as ‘perishable’. As a consequence normal factors such as transpiration and respiration lead ultimately to water loss and senescence of the product. Fruits and vegetables are living commodities and their rate of respiration is of key importance to maintenance of quality. It has been commonly observed that the greater the respiration rate of a product, the shorter the shelf-life. The principal problem for fresh-cut fruit industries is the relative shorter shelf-life of minimally processed fruit (MPF) compared to intact product. This fact is strictly connected with the higher ethylene production of fruit tissue stimulated during fresh-cut processing (peeling, cutting, dipping). 1-Methylcyclopropene (1-MCP) is an inhibitor of ethylene action and several researches have shown its effectiveness on the inhibition of ripening and senescence incidence for intact fruit and consequently on their shelf-life extension. More recently 1-MCP treatment has been tested also for shelf-life extension of MPF but discordant results have been obtained. Considering that in some countries 1-MCP is already a commercial product registered for the use on a number of horticultural products, the main aim of this actual study was to enhance our understanding on the effects of 1-MCP treatment on the quality maintenance of whole and fresh-cut climacteric and non-climacteric fruit (apple, kiwifruit and pineapple). Concerning the effects of 1-MCP on whole fruit, was investigated the effects of a semi-commercial postharvest treatment with 1-MCP on the quality of Pink Lady apples as functions of fruit ripening stage, 1-MCP dose, storage time and also in combination with controlled atmospheres storage in order to better understand what is the relationship among these parameters and if is possible to maximize the 1-MCP treatment to meet the market/consumer needs and then in order to put in the market excellent fruit. To achieve this purpose an incomplete three-level three-factor design was adopted. During the storage were monitored several quality parameters: firmness, ripening index, ethylene and carbon dioxide production and were also performed a sensory evaluations after 6 month of storage. In this study the higher retention of firmness (at the end of storage) was achieved by applying the greatest 1-MCP concentration to fruits with the lowest maturity stage. This finding means that in these semi-commercial conditions we may considerate completely blocked the fruit softening. 1-MCP was able to delay also the ethylene and CO2 production and the maturity parameters (soluble solids content and total acidity). Only in some cases 1-MCP generate a synergistic effect with the CA storage. The results of sensory analyses indicated that, the 1-MCP treatment did not affect the sweetness and whole fruit flavour while had a little effect on the decreasing cut fruit flavour. On the contrary the treated apple was more sour, crisp, firm and juicy. The effects of some treatment (dipping and MAP) on the nutrient stability were also investigated showing that in this case study the adopted treatments did not have drastic effects on the antioxidant compounds on the contrary the dipping may enhance the total antioxidant activity by the accumulation of ascorbic acid on the apple cut surface. Results concerning the effects of 1-MCP in combination with MAP on the quality parameters behaviour of the kiwifruit were not always consistent and clear: in terms of colour maintenance, it seemed to have a synergistic effect with N2O MAP; as far as ripening index is concerned, 1-MCP had a preservative effect, but just for sample packed in air.

Fish quality assessment through the application of chemico-physical, sensory and microbiological analyses

The quality of fish products is indispensably linked to the freshness of the raw material modulated by appropriate manipulation and storage conditions, specially the storage temperature after catch. The purpose of the research presented in this thesis, which was largely conducted in the context of a research project funded by Italian Ministry of Agricultural, Food and Forestry Policies (MIPAAF), concerned the evaluation of the freshness of farmed and wild fish species, in relation to different storage conditions, under ice (0°C) or at refrigeration temperature (4°C). Several specimens of different species, bogue (Boops boops), red mullet (Mullus barbatus), sea bream (Sparus aurata) and sea bass (Dicentrarchus labrax), during storage, under the different temperature conditions adopted, have been examined. The assessed control parameters were physical (texture, through the use of a dynamometer; visual quality using a computer vision system (CVS)), chemical (through footprint metabolomics 1H-NMR) and sensory (Quality Index Method (QIM). Microbiological determinations were also carried out on the species of hake (Merluccius merluccius). In general obtained results confirmed that the temperature of manipulation/conservation is a key factor in maintaining fish freshness. NMR spectroscopy showed to be able to quantify and evaluate the kinetics for unselected compounds during fish degradation, even a posteriori. This can be suitable for the development of new parameters related to quality and freshness. The development of physical methods, particularly the image analysis performed by computer vision system (CVS), for the evaluation of fish degradation, is very promising. Among CVS parameters, skin colour, presence and distribution of gill mucus, and eye shape modification evidenced a high sensibility for the estimation of fish quality loss, as a function of the adopted storage conditions. Particularly the eye concavity index detected on fish eye showed a high positive correlation with total QIM score.

Language and Embodiment: sensory-motor and linguistic-social experience. Evidence on sentence comprehension

In this work I address the study of language comprehension in an “embodied” framework. Firstly I show behavioral evidence supporting the idea that language modulates the motor system in a specific way, both at a proximal level (sensibility to the effectors) and at the distal level (sensibility to the goal of the action in which the single motor acts are inserted). I will present two studies in which the method is basically the same: we manipulated the linguistic stimuli (the kind of sentence: hand action vs. foot action vs. mouth action) and the effector by which participants had to respond (hand vs. foot vs. mouth; dominant hand vs. non-dominant hand). Response times analyses showed a specific modulation depending on the kind of sentence: participants were facilitated in the task execution (sentence sensibility judgment) when the effector they had to use to respond was the same to which the sentences referred. Namely, during language comprehension a pre-activation of the motor system seems to take place. This activation is analogous (even if less intense) to the one detectable when we practically execute the action described by the sentence. Beyond this effector specific modulation, we also found an effect of the goal suggested by the sentence. That is, the hand effector was pre-activated not only by hand-action-related sentences, but also by sentences describing mouth actions, consistently with the fact that to execute an action on an object with the mouth we firstly have to bring it to the mouth with the hand. After reviewing the evidence on simulation specificity directly referring to the body (for instance, the kind of the effector activated by the language), I focus on the specific properties of the object to which the words refer, particularly on the weight. In this case the hypothesis to test was if both lifting movement perception and lifting movement execution are modulated by language comprehension. We used behavioral and kinematics methods, and we manipulated the linguistic stimuli (the kind of sentence: the lifting of heavy objects vs. the lifting of light objects). To study the movement perception we measured the correlations between the weight of the objects lifted by an actor (heavy objects vs. light objects) and the esteems provided by the participants. To study the movement execution we measured kinematics parameters variance (velocity, acceleration, time to the first peak of velocity) during the actual lifting of objects (heavy objects vs. light objects). Both kinds of measures revealed that language had a specific effect on the motor system, both at a perceptive and at a motoric level. Finally, I address the issue of the abstract words. Different studies in the “embodied” framework tried to explain the meaning of abstract words The limit of these works is that they account only for subsets of phenomena, so results are difficult to generalize. We tried to circumvent this problem by contrasting transitive verbs (abstract and concrete) and nouns (abstract and concrete) in different combinations. The behavioral study was conducted both with German and Italian participants, as the two languages are syntactically different. We found that response times were faster for both the compatible pairs (concrete verb + concrete noun; abstract verb + abstract noun) than for the mixed ones. Interestingly, for the mixed combinations analyses showed a modulation due to the specific language (German vs. Italian): when the concrete word precedes the abstract one responses were faster, regardless of the word grammatical class. Results are discussed in the framework of current views on abstract words. They highlight the important role of developmental and social aspects of language use, and confirm theories assigning a crucial role to both sensorimotor and linguistic experience for abstract words.