Dalla città alla casa, dalla casa alla città: la mutevole ricerca di un Piano per il ben-essere urbano

La ricerca si propone di definire le linee guida per la stesura di un Piano che si occupi di qualità della vita e di benessere. Il richiamo alla qualità e al benessere è positivamente innovativo, in quanto impone agli organi decisionali di sintonizzarsi con la soggettività attiva dei cittadini e, contemporaneamente, rende evidente la necessità di un approccio più ampio e trasversale al tema della città e di una più stretta relazione dei tecnici/esperti con i responsabili degli organismi politicoamministrativi. La ricerca vuole indagare i limiti dell’urbanistica moderna di fronte alla complessità di bisogni e di nuove necessità espresse dalle popolazioni urbane contemporanee. La domanda dei servizi è notevolmente cambiata rispetto a quella degli anni Sessanta, oltre che sul piano quantitativo anche e soprattutto sul piano qualitativo, a causa degli intervenuti cambiamenti sociali che hanno trasformato la città moderna non solo dal punto di vista strutturale ma anche dal punto di vista culturale: l’intermittenza della cittadinanza, per cui le città sono sempre più vissute e godute da cittadini del mondo (turisti e/o visitatori, temporaneamente presenti) e da cittadini diffusi (suburbani, provinciali, metropolitani); la radicale trasformazione della struttura familiare, per cui la famiglia-tipo costituita da una coppia con figli, solido riferimento per l’economia e la politica, è oggi minoritaria; l’irregolarità e flessibilità dei calendari, delle agende e dei ritmi di vita della popolazione attiva; la mobilità sociale, per cui gli individui hanno traiettorie di vita e pratiche quotidiane meno determinate dalle loro origini sociali di quanto avveniva nel passato; l’elevazione del livello di istruzione e quindi l’incremento della domanda di cultura; la crescita della popolazione anziana e la forte individualizzazione sociale hanno generato una domanda di città espressa dalla gente estremamente variegata ed eterogenea, frammentata e volatile, e per alcuni aspetti assolutamente nuova. Accanto a vecchie e consolidate richieste – la città efficiente, funzionale, produttiva, accessibile a tutti – sorgono nuove domande, ideali e bisogni che hanno come oggetto la bellezza, la varietà, la fruibilità, la sicurezza, la capacità di stupire e divertire, la sostenibilità, la ricerca di nuove identità, domande che esprimono il desiderio di vivere e di godere la città, di stare bene in città, domande che non possono essere più soddisfatte attraverso un’idea di welfare semplicemente basata sull’istruzione, la sanità, il sistema pensionistico e l’assistenza sociale. La città moderna ovvero l’idea moderna della città, organizzata solo sui concetti di ordine, regolarità, pulizia, uguaglianza e buon governo, è stata consegnata alla storia passata trasformandosi ora in qualcosa di assai diverso che facciamo fatica a rappresentare, a descrivere, a raccontare. La città contemporanea può essere rappresentata in molteplici modi, sia dal punto di vista urbanistico che dal punto di vista sociale: nella letteratura recente è evidente la difficoltà di definire e di racchiudere entro limiti certi l’oggetto “città” e la mancanza di un convincimento forte nell’interpretazione delle trasformazioni politiche, economiche e sociali che hanno investito la società e il mondo nel secolo scorso. La città contemporanea, al di là degli ambiti amministrativi, delle espansioni territoriali e degli assetti urbanistici, delle infrastrutture, della tecnologia, del funzionalismo e dei mercati globali, è anche luogo delle relazioni umane, rappresentazione dei rapporti tra gli individui e dello spazio urbano in cui queste relazioni si muovono. La città è sia concentrazione fisica di persone e di edifici, ma anche varietà di usi e di gruppi, densità di rapporti sociali; è il luogo in cui avvengono i processi di coesione o di esclusione sociale, luogo delle norme culturali che regolano i comportamenti, dell’identità che si esprime materialmente e simbolicamente nello spazio pubblico della vita cittadina. Per studiare la città contemporanea è necessario utilizzare un approccio nuovo, fatto di contaminazioni e saperi trasversali forniti da altre discipline, come la sociologia e le scienze umane, che pure contribuiscono a costruire l’immagine comunemente percepita della città e del territorio, del paesaggio e dell’ambiente. La rappresentazione del sociale urbano varia in base all’idea di cosa è, in un dato momento storico e in un dato contesto, una situazione di benessere delle persone. L’urbanistica moderna mirava al massimo benessere del singolo e della collettività e a modellarsi sulle “effettive necessità delle persone”: nei vecchi manuali di urbanistica compare come appendice al piano regolatore il “Piano dei servizi”, che comprende i servizi distribuiti sul territorio circostante, una sorta di “piano regolatore sociale”, per evitare quartieri separati per fasce di popolazione o per classi. Nella città contemporanea la globalizzazione, le nuove forme di marginalizzazione e di esclusione, l’avvento della cosiddetta “new economy”, la ridefinizione della base produttiva e del mercato del lavoro urbani sono espressione di una complessità sociale che può essere definita sulla base delle transazioni e gli scambi simbolici piuttosto che sui processi di industrializzazione e di modernizzazione verso cui era orientata la città storica, definita moderna. Tutto ciò costituisce quel complesso di questioni che attualmente viene definito “nuovo welfare”, in contrapposizione a quello essenzialmente basato sull’istruzione, sulla sanità, sul sistema pensionistico e sull’assistenza sociale. La ricerca ha quindi analizzato gli strumenti tradizionali della pianificazione e programmazione territoriale, nella loro dimensione operativa e istituzionale: la destinazione principale di tali strumenti consiste nella classificazione e nella sistemazione dei servizi e dei contenitori urbanistici. E’ chiaro, tuttavia, che per poter rispondere alla molteplice complessità di domande, bisogni e desideri espressi dalla società contemporanea le dotazioni effettive per “fare città” devono necessariamente superare i concetti di “standard” e di “zonizzazione”, che risultano essere troppo rigidi e quindi incapaci di adattarsi all’evoluzione di una domanda crescente di qualità e di servizi e allo stesso tempo inadeguati nella gestione del rapporto tra lo spazio domestico e lo spazio collettivo. In questo senso è rilevante il rapporto tra le tipologie abitative e la morfologia urbana e quindi anche l’ambiente intorno alla casa, che stabilisce il rapporto “dalla casa alla città”, perché è in questa dualità che si definisce il rapporto tra spazi privati e spazi pubblici e si contestualizzano i temi della strada, dei negozi, dei luoghi di incontro, degli accessi. Dopo la convergenza dalla scala urbana alla scala edilizia si passa quindi dalla scala edilizia a quella urbana, dal momento che il criterio del benessere attraversa le diverse scale dello spazio abitabile. Non solo, nei sistemi territoriali in cui si è raggiunto un benessere diffuso ed un alto livello di sviluppo economico è emersa la consapevolezza che il concetto stesso di benessere sia non più legato esclusivamente alla capacità di reddito collettiva e/o individuale: oggi la qualità della vita si misura in termini di qualità ambientale e sociale. Ecco dunque la necessità di uno strumento di conoscenza della città contemporanea, da allegare al Piano, in cui vengano definiti i criteri da osservare nella progettazione dello spazio urbano al fine di determinare la qualità e il benessere dell’ambiente costruito, inteso come benessere generalizzato, nel suo significato di “qualità dello star bene”. E’ evidente che per raggiungere tale livello di qualità e benessere è necessario provvedere al soddisfacimento da una parte degli aspetti macroscopici del funzionamento sociale e del tenore di vita attraverso gli indicatori di reddito, occupazione, povertà, criminalità, abitazione, istruzione, etc.; dall’altra dei bisogni primari, elementari e di base, e di quelli secondari, culturali e quindi mutevoli, trapassando dal welfare state allo star bene o well being personale, alla wellness in senso olistico, tutte espressioni di un desiderio di bellezza mentale e fisica e di un nuovo rapporto del corpo con l’ambiente, quindi manifestazione concreta di un’esigenza di ben-essere individuale e collettivo. Ed è questa esigenza, nuova e difficile, che crea la diffusa sensazione dell’inizio di una nuova stagione urbana, molto più di quanto facciano pensare le stesse modifiche fisiche della città.

Retrieval of trace gases vertical profile in the lower atmosphere combining. Differential Optical Absorption Spectroscopy with radiative transfer models

The motivation for the work presented in this thesis is to retrieve profile information for the atmospheric trace constituents nitrogen dioxide (NO2) and ozone (O3) in the lower troposphere from remote sensing measurements. The remote sensing technique used, referred to as Multiple AXis Differential Optical Absorption Spectroscopy (MAX-DOAS), is a recent technique that represents a significant advance on the well-established DOAS, especially for what it concerns the study of tropospheric trace consituents. NO2 is an important trace gas in the lower troposphere due to the fact that it is involved in the production of tropospheric ozone; ozone and nitrogen dioxide are key factors in determining the quality of air with consequences, for example, on human health and the growth of vegetation. To understand the NO2 and ozone chemistry in more detail not only the concentrations at ground but also the acquisition of the vertical distribution is necessary. In fact, the budget of nitrogen oxides and ozone in the atmosphere is determined both by local emissions and non-local chemical and dynamical processes (i.e. diffusion and transport at various scales) that greatly impact on their vertical and temporal distribution: thus a tool to resolve the vertical profile information is really important. Useful measurement techniques for atmospheric trace species should fulfill at least two main requirements. First, they must be sufficiently sensitive to detect the species under consideration at their ambient concentration levels. Second, they must be specific, which means that the results of the measurement of a particular species must be neither positively nor negatively influenced by any other trace species simultaneously present in the probed volume of air. Air monitoring by spectroscopic techniques has proven to be a very useful tool to fulfill these desirable requirements as well as a number of other important properties. During the last decades, many such instruments have been developed which are based on the absorption properties of the constituents in various regions of the electromagnetic spectrum, ranging from the far infrared to the ultraviolet. Among them, Differential Optical Absorption Spectroscopy (DOAS) has played an important role. DOAS is an established remote sensing technique for atmospheric trace gases probing, which identifies and quantifies the trace gases in the atmosphere taking advantage of their molecular absorption structures in the near UV and visible wavelengths of the electromagnetic spectrum (from 0.25 μm to 0.75 μm). Passive DOAS, in particular, can detect the presence of a trace gas in terms of its integrated concentration over the atmospheric path from the sun to the receiver (the so called slant column density). The receiver can be located at ground, as well as on board an aircraft or a satellite platform. Passive DOAS has, therefore, a flexible measurement configuration that allows multiple applications. The ability to properly interpret passive DOAS measurements of atmospheric constituents depends crucially on how well the optical path of light collected by the system is understood. This is because the final product of DOAS is the concentration of a particular species integrated along the path that radiation covers in the atmosphere. This path is not known a priori and can only be evaluated by Radiative Transfer Models (RTMs). These models are used to calculate the so called vertical column density of a given trace gas, which is obtained by dividing the measured slant column density to the so called air mass factor, which is used to quantify the enhancement of the light path length within the absorber layers. In the case of the standard DOAS set-up, in which radiation is collected along the vertical direction (zenith-sky DOAS), calculations of the air mass factor have been made using “simple” single scattering radiative transfer models. This configuration has its highest sensitivity in the stratosphere, in particular during twilight. This is the result of the large enhancement in stratospheric light path at dawn and dusk combined with a relatively short tropospheric path. In order to increase the sensitivity of the instrument towards tropospheric signals, measurements with the telescope pointing the horizon (offaxis DOAS) have to be performed. In this circumstances, the light path in the lower layers can become very long and necessitate the use of radiative transfer models including multiple scattering, the full treatment of atmospheric sphericity and refraction. In this thesis, a recent development in the well-established DOAS technique is described, referred to as Multiple AXis Differential Optical Absorption Spectroscopy (MAX-DOAS). The MAX-DOAS consists in the simultaneous use of several off-axis directions near the horizon: using this configuration, not only the sensitivity to tropospheric trace gases is greatly improved, but vertical profile information can also be retrieved by combining the simultaneous off-axis measurements with sophisticated RTM calculations and inversion techniques. In particular there is a need for a RTM which is capable of dealing with all the processes intervening along the light path, supporting all DOAS geometries used, and treating multiple scattering events with varying phase functions involved. To achieve these multiple goals a statistical approach based on the Monte Carlo technique should be used. A Monte Carlo RTM generates an ensemble of random photon paths between the light source and the detector, and uses these paths to reconstruct a remote sensing measurement. Within the present study, the Monte Carlo radiative transfer model PROMSAR (PROcessing of Multi-Scattered Atmospheric Radiation) has been developed and used to correctly interpret the slant column densities obtained from MAX-DOAS measurements. In order to derive the vertical concentration profile of a trace gas from its slant column measurement, the AMF is only one part in the quantitative retrieval process. One indispensable requirement is a robust approach to invert the measurements and obtain the unknown concentrations, the air mass factors being known. For this purpose, in the present thesis, we have used the Chahine relaxation method. Ground-based Multiple AXis DOAS, combined with appropriate radiative transfer models and inversion techniques, is a promising tool for atmospheric studies in the lower troposphere and boundary layer, including the retrieval of profile information with a good degree of vertical resolution. This thesis has presented an application of this powerful comprehensive tool for the study of a preserved natural Mediterranean area (the Castel Porziano Estate, located 20 km South-West of Rome) where pollution is transported from remote sources. Application of this tool in densely populated or industrial areas is beginning to look particularly fruitful and represents an important subject for future studies.

Psychobiological correlates of allostatic load

Introduction: The term Clinimetric was introduced by Feinstein in 1982, who first noticed that despite all the improvements in the assessment methods, a number of clinical phenomena were still unconsidered during the evaluation process. Yet today clinical phenomena, such as stress, relevant in diseases progression and course, are not completely evaluated. Only recently, according to the clinimetric approach, Fava and colleagues have introduced specific criteria for evaluating the allostatic overload in clinical setting. Methods: Participants were 240 blood donors recruited from May 2007 to December 2009 in 4 different blood Centers (AVIS) in Italy. Blood samples from each participant were collected for laboratory test the same day the self-rating instruments were administered (Psychosocial Index, Symptom Questionnaire, Psychological well-being scales, Temperament and Character inventory, Self-Report Altruism scale). The study explore different aspects describing sample characteristics and correlates of stress in the total sample (part I), new selection criteria applied to existing instruments to identify individuals reporting allostatic load (part II), and differences on biological correlates between subjects with vs without AL. Results: Significant differences according to gender and past illnesses have been found in different dimensions of well-being and distress. Further, distress was explained for more than 60% by 4 main factors such as anxiety, somatic symptoms, environmental mastery and persistence. According to the new criteria, 98 donors reported AL. Allostatic load individuals reported to engage in less altruistic behaviours. Also they differ in personality traits and characters from controls. In the last part, results showed significant differences among donors according to allostatic load on diverse biological parameters (RBC, MCV, immune essay). Conclusion: This study presents obvious limitations due to its preliminary nature. Further research are need to confirm that these new criteria may lead to identify high risk individuals reporting not only stressful situations but also vulnerabilities.

Optimization of bioenergy solutions at different farm scales

RAF is a bio-energetic descriptive model integrates with MAD model to support Integrated Farm Management. RAF model aimed to enhancing economical, social and environmental sustainability of farm production in terms of energy via convert energy crops and animal manure to biogas and digestate (bio-fertilizers) by anaerobic digestion technologies, growing and breeding practices. The user defines farm structure in terms of present crops, livestock and market prices and RAF model investigates the possibilities of establish on-farm biogas system (different anaerobic digestion technologies proposed for different scales of farms in terms of energy requirements) according to budget and sustainability constraints to reduce the dependence on fossil fuels. The objective function of RAF (Z) is optimizing the total net income of farm (maximizing income and minimizing costs) for whole period which is considered by the analysis. The main results of this study refers to the possibility of enhancing the exploitation of the available Italian potentials of biogas production from on-farm production of energy crops and livestock manure feedstock by using the developed mathematical model RAF integrates with MAD to presents reliable reconcile between farm size, farm structure and on-farm biogas systems technologies applied to support selection, applying and operating of appropriate biogas technology at any farm under Italian conditions.

Social housing: interventions of densification in urban regeneration (1995-2010). Critical analysis of strategies adopted in Milan, London, São Paulo

The prospect of the continuous multiplication of life styles, the obsolescence of the traditional typological diagrams, the usability of spaces on different territorial scales, imposes on contemporary architecture the search for new models of living. Limited densities in urban development have produced the erosion of territory, the increase of the harmful emissions and energy consumption. High density housing cannot refuse the social emergency to ensure high quality and low cost dwellings, to a new people target: students, temporary workers, key workers, foreign, young couples without children, large families and, in general, people who carry out public services. Social housing strategies have become particularly relevant in regenerating high density urban outskirts. The choice of this research topic derives from the desire to deal with the recent accommodation emergency, according to different perspectives, with a view to give a contribution to the current literature, by proposing some tools for a correct design of the social housing, by ensuring good quality, cost-effective, and eco-sustainable solutions, from the concept phase, through management and maintenance, until the end of the building life cycle. The purpose of the thesis is defining a framework of guidelines that become effective instruments to be used in designing the social housing. They should also integrate the existing regulations and are mainly thought for those who work in this sector. They would aim at supporting students who have to cope with this particular residential theme, and also the users themselves. The scientific evidence of either the recent specialized literature or the solutions adopted in some case studies within the selected metropolitan areas of Milan, London and São Paulo, it is possible to identify the principles of this new design approach, in which the connection between typology, morphology and technology pursues the goal of a high living standard.

Percieved Organizational Efficacy in Internationalized Companies: Application of Competing Values Approach and Collective Efficacy

This dissertation focuses on “organizational efficacy”, in particular on employees’ beliefs of organizational capacity to be efficacious. Organizational efficacy is considered from two perspectives – competing values approach and collective efficacy, and evaluated in internationalized companies. The dissertation is composed of three studies. The data were collected in thirteen Italian companies on different stages of internationalization for a total number of respondents is 358. In the first study the factorial validity of the competing values instrument (Rohrbaugh, 1981) was investigated and confirmed. Two scales were used to measure collective efficacy: a general collective efficacy scale (Bohn, 2010), and a specific collective efficacy scale, developed following suggestions of Borgogni et al. (2001), it evaluates employees’ beliefs of efficacy of organizations in the international market. The findings suggest that competing values and collective organizational efficacy instruments may provide a multi-faceted measurement of employees’ beliefs of organizational efficacy. The second study examined the relationship between organizational efficacy and collective work engagement. To measure collective work engagement the UWES-9 (Schaufeli & Bakker, 2003) was adapted at the group level; its factor structure and reliability were similar to the standard UWES-9. The findings suggest that organizational efficacy fully predicts collective work engagement. Also we investigated whether leadership moderates the relationship between organizational efficacy and collective work engagement. We operationalized leadership style with MLQ (Bass & Avolio, 1995); the results suggest that intellectual stimulation and idealized influence (transformational leadership) and contingent reward (transactional leadership) enhance the impact of organizational efficacy on collective work engagement. In the third study we investigated organizational efficacy and collective work engagement in internationalized companies. The findings show that beliefs of organizational efficacy vary across companies in different stages of internationalization, while no significant difference was found for collective work engagement. Limitations, practical implications and future studies are discussed in the conclusion.

Stream sediments analysis for geochemical mapping of Romagna Apennines (Northern Italy): monitoring and management tool of environmental resources at various scales

Geochemical mapping is a valuable tool for the control of territory that can be used not only in the identification of mineral resources and geological, agricultural and forestry studies but also in the monitoring of natural resources by giving solutions to environmental and economic problems. Stream sediments are widely used in the sampling campaigns carried out by the world's governments and research groups for their characteristics of broad representativeness of rocks and soils, for ease of sampling and for the possibility to conduct very detailed sampling In this context, the environmental role of stream sediments provides a good basis for the implementation of environmental management measures, in fact the composition of river sediments is an important factor in understanding the complex dynamics that develop within catchment basins therefore they represent a critical environmental compartment: they can persistently incorporate pollutants after a process of contamination and release into the biosphere if the environmental conditions change. It is essential to determine whether the concentrations of certain elements, in particular heavy metals, can be the result of natural erosion of rocks containing high concentrations of specific elements or are generated as residues of human activities related to a certain study area. This PhD thesis aims to extract from an extensive database on stream sediments of the Romagna rivers the widest spectrum of informations. The study involved low and high order stream in the mountain and hilly area, but also the sediments of the floodplain area, where intensive agriculture is active. The geochemical signals recorded by the stream sediments will be interpreted in order to reconstruct the natural variability related to bedrock and soil contribution, the effects of the river dynamics, the anomalous sites, and with the calculation of background values be able to evaluate their level of degradation and predict the environmental risk.

Psychosocial correlates of rehabilitation from stroke: a longitudinal study

The general aim of this dissertation was to uncover the association between psychosocial factors and rehabilitation outcome after stroke. METHOD. A sample of patients with stroke (n=40) and their caregivers (n=36) were assessed at admission to and six months after discharge from rehabilitation hospital, using the following instruments: Structured Clinical Interview for DSM-IV, structured interview based on Diagnostic Criteria for Psychosomatic Research, Symptom Questionnaire, Psychosocial Index, Psychological Well-Being Scales, and Family Assessment Device. 40 subjects from the general population underwent the same psychological assessment. In addition, patients' functional status was measured using the Functional Independence Measure. RESULTS. Stroke survivors reported lower education and higher alcohol consumption than controls. No significant differences emerged between the two groups in the prevalence of psychiatric diagnoses or psychosomatic syndromes, however patients reported significantly higher levels of anxiety, depression, somatic symptoms, and lower autonomy than controls. Caregivers reported significantly higher scores in anxiety, depression, and somatic symptoms compared to normative data, while no impairments emerged in psychological well-being and family functioning. At six-month follow-up, in patients a significant decrease in smoking habit and an increase in DSM diagnoses were reported. Both stroke survivors and caregivers showed significant reductions in anxiety, with patients displaying also a decrease in somatic symptoms, an increase in stress and a deterioration in quality of life. Significant deteriorations in several aspects of family functioning was perceived only by patients. An association between patients' functional recovery in the cognitive domain and family behavior control emerged. For caregivers, family functioning significantly predicted hostility and somatic symptoms were associated with family affective involvement. CONCLUSIONS. These data highlight the utility in the Italian setting of the adoption of a psychosocial assessment and a family-systems approach in stroke rehabilitation, in order to development interventions properly targeted to the characteristics of patients and their family members.

Gravitational Lensing as a Tool on Galactic and Cosmological Scales

This work considers the reconstruction of strong gravitational lenses from their observed effects on the light distribution of background sources. After reviewing the formalism of gravitational lensing and the most common and relevant lens models, new analytical results on the elliptical power law lens are presented, including new expressions for the deflection, potential, shear and magnification, which naturally lead to a fast numerical scheme for practical calculation. The main part of the thesis investigates lens reconstruction with extended sources by means of the forward reconstruction method, in which the lenses and sources are given by parametric models. The numerical realities of the problem make it necessary to find targeted optimisations for the forward method, in order to make it feasible for general applications to modern, high resolution images. The result of these optimisations is presented in the \textsc{Lensed} algorithm. Subsequently, a number of tests for general forward reconstruction methods are created to decouple the influence of sourced from lens reconstructions, in order to objectively demonstrate the constraining power of the reconstruction. The final chapters on lens reconstruction contain two sample applications of the forward method. One is the analysis of images from a strong lensing survey. Such surveys today contain $\sim 100$ strong lenses, and much larger sample sizes are expected in the future, making it necessary to quickly and reliably analyse catalogues of lenses with a fixed model. The second application deals with the opposite situation of a single observation that is to be confronted with different lens models, where the forward method allows for natural model-building. This is demonstrated using an example reconstruction of the ``Cosmic Horseshoe''. An appendix presents an independent work on the use of weak gravitational lensing to investigate theories of modified gravity which exhibit screening in the non-linear regime of structure formation.