Stratigraphy and Palaeontology of the Late Cretaceous Wapiti Formation, west-central Alberta, Canada

A complete stratigraphic assessment and revision of the middle Campanian to upper Maastrichtian Wapiti Formation in north-western Alberta and north-eastern British Columbia is the main aim of this research project. The study area encompasses an area of approximately 200X180 km in the Grande Prairie County (west-central Alberta) and easternmost British Columbia, Canada. Results presented here indicate that the 1300m thick succession currently reported in the literature as “undifferentiated lithostratigraphic unit”, consists of five lithostratigraphic units and four unconformity-bounded depositional sequences; their study and description have been documented integrating several geological disciplines, including sequence stratigraphic methods, well-log signatures, facies analysis, and fossil associations. On the whole, particular attention has been given to 1) age and nature of both basal and upper contacts of the Wapiti Formation, 2) effective mappability of lithostratigraphic units and depositional sequences in western Alberta, and 3) the identification of previously undetermined maximum flooding surface of the Bearpaw seaway and Drumheller Marine Tongue, which are reference marine unit in central and southern Alberta. A second, but not less important, guideline for the project has been the rich paleontological record of the Wapiti deposits. Detailed paleoenvironmental and taxonomical information on old and new finds have been the base for correlation with well known associations of Alaska, southern Alberta, and Montana. Newly discovered rich fossil localities documented an extraordinarily diverse fauna during the latest Cretaceous, including dinosaurs, squamates, and fresh-water fishes and reptiles. Lastly, in order to better characterize the Wapiti Formation, major marker beds were described: these include several bentonites (altered volcanic ash deposits) which have been documented over an area of almost 30.000 km2, as well as four major coal zones, characterized by tabular coal seams with an overall thickness of 2 meters. Such marker beds represent a formidable tool for high-resolution chronology and regional correlations within the Late Cretaceous Alberta foreland basin.

The Perception of American Adolescent Culture Through the Dubbing and Fansubbing of a Selection of US Teen Series from 1990 to 2013

The present dissertation aims at analyzing the construction of American adolescent culture through teen-targeted television series and the shift in perception that occurs as a consequence of the translation process. In light of the recent changes in television production and consumption modes, largely caused by new technologies, this project explores the evolution of Italian audiences, focusing on fansubbing (freely distributed amateur subtitles made by fans for fan consumption) and social viewing (the re-aggregation of television consumption based on social networks and dedicated platforms, rather than on physical presence). These phenomena are symptoms of a sort of ‘viewership 2.0’ and of a new type of active viewing, which calls for a revision of traditional AVT strategies. Using a framework that combines television studies, new media studies, and fandom studies with an approach to AVT based on Descriptive Translation Studies (Toury 1995), this dissertation analyzes the non-Anglophone audience’s growing need to participation in the global dialogue and appropriation process based on US scheduling and informed by the new paradigm of convergence culture, transmedia storytelling, and affective economics (Jenkins 2006 and 2007), as well as the constraints intrinsic to multimodal translation and the different types of linguistic and cultural adaptation performed through dubbing (which tends to be more domesticating; Venuti 1995) and fansubbing (typically more foreignizing). The study analyzes a selection of episodes from six of the most popular teen television series between 1990 and 2013, which has been divided into three ages based on the different modes of television consumption: top-down, pre-Internet consumption (Beverly Hills, 90210, 1990 – 2000), emergence of audience participation (Buffy the Vampire Slayer, 1997 – 2003; Dawson’s Creek, 1998 – 2003), age of convergence and Viewership 2.0 (Gossip Girl, 2007 – 2012; Glee, 2009 – present; The Big Bang Theory, 2007 - present).

Models and Simulations of Diamond-like Carbon for large-area high voltage power diodes

Silicon-based discrete high-power devices need to be designed with optimal performance up to several thousand volts and amperes to reach power ratings ranging from few kWs to beyond the 1 GW mark. To this purpose, a key element is the improvement of the junction termination (JT) since it allows to drastically reduce surface electric field peaks which may lead to an earlier device failure. This thesis will be mostly focused on the negative bevel termination which from several years constitutes a standard processing step in bipolar production lines. A simple methodology to realize its counterpart, a planar JT with variation of the lateral doping concentration (VLD) will be also described. On the JT a thin layer of a semi insulating material is usually deposited, which acts as passivation layer reducing the interface defects and contributing to increase the device reliability. A thorough understanding of how the passivation layer properties affect the breakdown voltage and the leakage current of a fast-recovery diode is fundamental to preserve the ideal termination effect and provide a stable blocking capability. More recently, amorphous carbon, also called diamond-like carbon (DLC), has been used as a robust surface passivation material. By using a commercial TCAD tool, a detailed physical explanation of DLC electrostatic and transport properties has been provided. The proposed approach is able to predict the breakdown voltage and the leakage current of a negative beveled power diode passivated with DLC as confirmed by the successfully validation against the available experiments. In addition, the VLD JT proposed to overcome the limitation of the negative bevel architecture has been simulated showing a breakdown voltage very close to the ideal one with a much smaller area consumption. Finally, the effect of a low junction depth on the formation of current filaments has been analyzed by performing reverse-recovery simulations.

Decentralized systems for the protection and portability of personal data

The General Data Protection Regulation (GDPR) has been designed to help promote a view in favor of the interests of individuals instead of large corporations. However, there is the need of more dedicated technologies that can help companies comply with GDPR while enabling people to exercise their rights. We argue that such a dedicated solution must address two main issues: the need for more transparency towards individuals regarding the management of their personal information and their often hindered ability to access and make interoperable personal data in a way that the exercise of one's rights would result in straightforward. We aim to provide a system that helps to push personal data management towards the individual's control, i.e., a personal information management system (PIMS). By using distributed storage and decentralized computing networks to control online services, users' personal information could be shifted towards those directly concerned, i.e., the data subjects. The use of Distributed Ledger Technologies (DLTs) and Decentralized File Storage (DFS) as an implementation of decentralized systems is of paramount importance in this case. The structure of this dissertation follows an incremental approach to describing a set of decentralized systems and models that revolves around personal data and their subjects. Each chapter of this dissertation builds up the previous one and discusses the technical implementation of a system and its relation with the corresponding regulations. We refer to the EU regulatory framework, including GDPR, eIDAS, and Data Governance Act, to build our final system architecture's functional and non-functional drivers. In our PIMS design, personal data is kept in a Personal Data Space (PDS) consisting of encrypted personal data referring to the subject stored in a DFS. On top of that, a network of authorization servers acts as a data intermediary to provide access to potential data recipients through smart contracts.

Taxonomy, phylogeography and myrmecophily of the spider genus Mastigusa (Araneae, Cybaeidae)

The genus Mastigusa Menge, 1854 includes small entelegyne spiders represented by extant and fossil species presenting characteristic features in male and female genitalia. The genus has a palearctic distribution, being present in Europe, North Africa, and the Near East, and shows ecological plasticity, with free-living, cave- dwelling and myrmecophile populations. The taxonomic history of the genus has been problematic, both regarding its phylogenetic placement and the delimitation of the species it includes. Three extant species are currently recognized, but the characters used to discriminate them have been inconsistent, leading to confusion about their identification and distribution. In the present thesis we addressed the taxonomic issues regarding Mastigusa by combining molecular and morphological data in an integrative taxonomy approach. For the first time, we included the genus in a molecular phylogenetic matrix solving a long going debate regarding its familiar placement, obtaining a well-supported placement in the family Cybaeidae. We used multi-locus molecular phylogenetic and DNA barcoding techniques as a starting point for identifying divergent lineages within the genus and revise the taxonomic status of the three known Mastigusa species, identifying a new species from the Iberian Peninsula, Algeria and the United Kingdom: M. raimondi sp. n. This taxonomic revision allowed a phylogeographic and ecological study of Mastigusa across its distribution range, carried out using phylogenetics and ecological niche modelling techniques, aiming at a comparison of the lifestyles and ecological requirements of the different species on a geographic scale. The Italian Alps were finally used as a testing ground for investigating the ecology and host preference of myrmecophile Mastigusa arietina populations living in association with ant species belonging to the Formica rufa species group. Spiders were found in association with five different Formica species, demonstrating little specificity and the tendency of associating with the locally present host species.