The effect of linseed oil on the properties of lime-based restoration mortars

The traditional lime mortar is composed of hydrated lime, sand and water. Besides these constituents it may also contain additives aiming to modify fresh mortar´s properties and/or to improve hardened mortar´s strength and durability. Already in the first civilizations various additives were used to enhance mortar´s quality, among the organic additives, linseed oil was one of the most common. From literature we know that it was used already in Roman period to reduce water permeability of a mortar, but the mechanism and the technology, e.g. effects of different dosages, are not clearly explained. There are only few works studying the effect of oil experimentally. Knowing the function of oil in historical mortars is important for designing a new compatible repair mortar. Moreover, linseed oil addition could increase the sometimes insufficient durability of lime-based mortars used for reparation and it could be a natural alternative to synthetic additives. In the present study, the effect of linseed oil on the properties of six various lime-based mortars has been studied. Mortars´ compositions have been selected with respect to composition of historical mortars, but also mortars used in a modern restoration practise have been tested. Oil was added in two different concentrations – 1% and 3% by the weight of binder. The addition of 1% of linseed oil has proved to have positive effect on mortars´ properties. It improves mechanical characteristics and limits water absorption into mortar without affecting significantly the total open porosity or decreasing the degree of carbonation. On the other hand, the 3% addition of linseed oil is making mortar to be almost hydrophobic, but it markedly decreases mortars´ strength. However, all types of tested lime-based mortars with the oil addition showed significantly decreased water and salt solution absorption by capillary rise. Addition of oil into mortars is also decreasing the proportion of pores which are easily accessible to water. Furthermore, mortars with linseed oil showed significantly improved resistance to salt crystallization and freeze-thaw cycles. On the base of the obtained results, the addition of 1% of linseed oil can be taken into consideration in the design of mortars meant to repair or replace historic mortars.

L’istituto della riabilitazione tra cancellazione del reato e riparazione alla vittima: la sua applicazione nelle realtà europee italiana e belga

La realizzazione di questa ricerca ha come obiettivo principe lo studio approfondito dell’istituto della riabilitazione penale all’interno del panorama legislativo italiano, con riferimento al contesto bolognese, e nella legislazione belga; inoltre si pone come scopo l’analisi dell’interazione autore-vittima del reato, con una particolare attenzione al risarcimento elargito alla persona offesa dal reato e alla figura della vittima prima nel sistema penale, poi nel procedimento specifico che porta alla riabilitazione del condannato. Il punto di partenza del lavoro di ricerca intrapreso è costituito da un’accurata ricerca bibliografica inerente agli argomenti trattati, al fine di poter approfondire una buona parte della letteratura italiana e belga esistente in materia. La fase successiva della ricerca è stata quella di reperire informazioni riguardanti l’ambito di studio da approfondire, cioè la riabilitazione, secondo una direttrice empirica. Pertanto, per quanto concerne la realtà italiana, sono stati analizzati, tramite una griglia di rilevazione costruita ad hoc, i fascicoli processuali relativi alla riabilitazione presenti negli archivi del Tribunale di Sorveglianza di Bologna (2004-2009); la situazione belga è invece stata studiata reperendo dati, riferiti alla réhabilitation pénal, rintracciati presso il “Service Public Fédéral Justice - Bureau Permanent Statistiques et Mesure de la charge de travail (BPSM)” (2008-2009), sia livello nazionale che delle cinque Corti di appello. Inoltre, al fine di ottenere un ulteriore punto di vista empirico riguardante l’istituto della riabilitazione penale, sono state effettuate delle interviste semi-strutturate al Presidente del Tribunale di Sorveglianza Dott. Francesco Maisto e al Sostituto Procuratore Generale di Liège Mr. Nicolas Banneux. Infatti l’esperienza lavorativa e il particolare ruolo ricoperto da questi “osservatori privilegiati”, competenti di riabilitazione e particolarmente sensibili alle tematiche criminologiche e vittimologiche, li pone direttamente in contatto con l’istituto e la procedura della riabilitazione, determinando in loro una profonda padronanza dell’oggetto di ricerca.

I limiti all'autonomia procedurale degli Stati membri dell'UE in materia risarcitoria

This work analyses the limits that the principle of State liability for damages suffered by individuals because of breach of EU law poses to the procedural autonomy of the Member States of the EU. The introductory part of this work is dedicated to the general character of the limitations EU law poses to the State’s competence in procedural matters. The first part of the research, instead, focuses on the specific limits that european law poses on the rules of procedure related to the legal regime of the right to compensation and its operating conditions; in particular, this first part explores respectively the “substantive” and “procedural” limits that EU law poses to the State’s autonomy to regulate actions for damages for breaches of EU law. The substantial limits concern the conditions of eligibility of liability and the constitutive conditions of the right to compensation; the procedural limits to the action for damages refer to the concrete organization and characteristics of the judicial action. The second part of the research is devoted to rules of procedure governing the relations between judicial remedies explicitly aimed at protecting the right to reparation and other remedies that may be relevant, both europeans and nationals. The first chapter of the second part of this work focuses on the rules governing the relations between the action for damages brought up at the national level and the remedies provided by european Treaties; finally, I explore the relations between the action for damages brought up at the national level and other remedies present in the same national juridical order. I reconstruct all the limits to the procedural autonomy of Member States concerning the right to compensation; consequently, I verify that those limits represent part of the system of internal procedures, able to guarantee the respect of european law.

Silica-Supported Gold Nanoparticles: Synthesis, Characterization and Reactivity

The main aim of this work was the synthesis and applications of functionalized-silica-supported gold nanoparticles. The silica-anchored functionalities employed, e.g. amine, alkynyl carbamate and sulfide moieties, possess a notable affinity with gold, so that they could be able to capture the gold precursor, to spontaneously reduce it (possibly at room temperature), and to stabilize the resulting gold nanoparticles. These new materials, potentially suitable for heterogeneous catalysis applications, could represent a breakthrough among the “green” synthesis of supported gold nanoparticles, since they would circumvent the addition of extra reducing agent and stabilizers, also allowing concomitant absorption of the active catalyst particles on the support immediately after spontaneous formation of gold nanoparticles. In chapter 4 of this thesis is also presented the work developed during a seven-months Marco Polo fellowship stay at the University of Lille (France), regarding nanoparticles nucleation and growth inside a microfluidic system and the study of the corresponding mechanism by in situ XANES spectroscopy. Finally, studies regarding the reparation and reactivity of gold decorated nanodiamonds are also described. Various methods of characterization have been used, such as ultraviolet-visible spectroscopy (UV-Vis), Transmission Electron Microscopy (TEM), Dynamic Light Scattering (DLS), X-ray Fluorescence (XRF), Field Emission Gun Scanning Electron Microscopy (SEM-FEG), X-ray Photoionization (XPS), X ray Absorption Spectroscopy (XAS).